diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-22 16:01:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-22 16:01:57 -0700 |
commit | 431bf99d26157d56689e5de65bd27ce9f077fc3f (patch) | |
tree | b15e357039956fcdd0e0e6177d2fc99bb3cfa822 /drivers | |
parent | 72f96e0e38d7e29ba16dcfd824ecaebe38b8293e (diff) | |
parent | 7ae033cc0dfce68d8e0c83aca60837cf2bf0d2e6 (diff) |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits)
PM: Improve error code of pm_notifier_call_chain()
PM: Add "RTC" to PM trace time stamps to avoid confusion
PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
PM / Suspend: Add .suspend_again() callback to suspend_ops
PM / OPP: Introduce function to free cpufreq table
ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
PM / Domains: Take .power_off() error code into account
ARM / shmobile: Use genpd_queue_power_off_work()
ARM / shmobile: Use pm_genpd_poweroff_unused()
PM / Domains: Introduce function to power off all unused PM domains
OMAP: PM: disable idle on suspend for GPIO and UART
OMAP: PM: omap_device: add API to disable idle on suspend
OMAP: PM: omap_device: add system PM methods for PM domain handling
OMAP: PM: omap_device: conditionally use PM domain runtime helpers
PM / Runtime: Add new helper function: pm_runtime_status_suspended()
PM / Domains: Queue up power off work only if it is not pending
PM / Domains: Improve handling of wakeup devices during system suspend
PM / Domains: Do not restore all devices on power off error
PM / Domains: Allow callbacks to execute all runtime PM helpers
PM / Domains: Do not execute device callbacks under locks
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/base/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/base/power/clock_ops.c | 234 | ||||
-rw-r--r-- | drivers/base/power/domain.c | 1273 | ||||
-rw-r--r-- | drivers/base/power/generic_ops.c | 98 | ||||
-rw-r--r-- | drivers/base/power/main.c | 65 | ||||
-rw-r--r-- | drivers/base/power/opp.c | 17 | ||||
-rw-r--r-- | drivers/base/power/runtime.c | 89 | ||||
-rw-r--r-- | drivers/base/power/sysfs.c | 6 | ||||
-rw-r--r-- | drivers/base/power/trace.c | 2 | ||||
-rw-r--r-- | drivers/char/apm-emulation.c | 2 | ||||
-rw-r--r-- | drivers/pci/pci-driver.c | 18 | ||||
-rw-r--r-- | drivers/s390/char/vmwatchdog.c | 4 | ||||
-rw-r--r-- | drivers/s390/cio/css.c | 8 | ||||
-rw-r--r-- | drivers/scsi/scsi_pm.c | 8 |
14 files changed, 1637 insertions, 188 deletions
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index 3647e114d0e..2639ae79a37 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o obj-$(CONFIG_PM_RUNTIME) += runtime.o obj-$(CONFIG_PM_TRACE_RTC) += trace.o obj-$(CONFIG_PM_OPP) += opp.o +obj-$(CONFIG_PM_GENERIC_DOMAINS) += domain.o obj-$(CONFIG_HAVE_CLK) += clock_ops.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
\ No newline at end of file diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index ad367c4139b..a846b2f95cf 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -15,9 +15,9 @@ #include <linux/slab.h> #include <linux/err.h> -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM -struct pm_runtime_clk_data { +struct pm_clk_data { struct list_head clock_list; struct mutex lock; }; @@ -36,25 +36,25 @@ struct pm_clock_entry { enum pce_status status; }; -static struct pm_runtime_clk_data *__to_prd(struct device *dev) +static struct pm_clk_data *__to_pcd(struct device *dev) { return dev ? dev->power.subsys_data : NULL; } /** - * pm_runtime_clk_add - Start using a device clock for runtime PM. - * @dev: Device whose clock is going to be used for runtime PM. + * pm_clk_add - Start using a device clock for power management. + * @dev: Device whose clock is going to be used for power management. * @con_id: Connection ID of the clock. * * Add the clock represented by @con_id to the list of clocks used for - * the runtime PM of @dev. + * the power management of @dev. */ -int pm_runtime_clk_add(struct device *dev, const char *con_id) +int pm_clk_add(struct device *dev, const char *con_id) { - struct pm_runtime_clk_data *prd = __to_prd(dev); + struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; - if (!prd) + if (!pcd) return -EINVAL; ce = kzalloc(sizeof(*ce), GFP_KERNEL); @@ -73,20 +73,20 @@ int pm_runtime_clk_add(struct device *dev, const char *con_id) } } - mutex_lock(&prd->lock); - list_add_tail(&ce->node, &prd->clock_list); - mutex_unlock(&prd->lock); + mutex_lock(&pcd->lock); + list_add_tail(&ce->node, &pcd->clock_list); + mutex_unlock(&pcd->lock); return 0; } /** - * __pm_runtime_clk_remove - Destroy runtime PM clock entry. - * @ce: Runtime PM clock entry to destroy. + * __pm_clk_remove - Destroy PM clock entry. + * @ce: PM clock entry to destroy. * - * This routine must be called under the mutex protecting the runtime PM list - * of clocks corresponding the the @ce's device. + * This routine must be called under the mutex protecting the PM list of clocks + * corresponding the the @ce's device. */ -static void __pm_runtime_clk_remove(struct pm_clock_entry *ce) +static void __pm_clk_remove(struct pm_clock_entry *ce) { if (!ce) return; @@ -108,95 +108,99 @@ static void __pm_runtime_clk_remove(struct pm_clock_entry *ce) } /** - * pm_runtime_clk_remove - Stop using a device clock for runtime PM. - * @dev: Device whose clock should not be used for runtime PM any more. + * pm_clk_remove - Stop using a device clock for power management. + * @dev: Device whose clock should not be used for PM any more. * @con_id: Connection ID of the clock. * * Remove the clock represented by @con_id from the list of clocks used for - * the runtime PM of @dev. + * the power management of @dev. */ -void pm_runtime_clk_remove(struct device *dev, const char *con_id) +void pm_clk_remove(struct device *dev, const char *con_id) { - struct pm_runtime_clk_data *prd = __to_prd(dev); + struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; - if (!prd) + if (!pcd) return; - mutex_lock(&prd->lock); + mutex_lock(&pcd->lock); - list_for_each_entry(ce, &prd->clock_list, node) { + list_for_each_entry(ce, &pcd->clock_list, node) { if (!con_id && !ce->con_id) { - __pm_runtime_clk_remove(ce); + __pm_clk_remove(ce); break; } else if (!con_id || !ce->con_id) { continue; } else if (!strcmp(con_id, ce->con_id)) { - __pm_runtime_clk_remove(ce); + __pm_clk_remove(ce); break; } } - mutex_unlock(&prd->lock); + mutex_unlock(&pcd->lock); } /** - * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks. - * @dev: Device to initialize the list of runtime PM clocks for. + * pm_clk_init - Initialize a device's list of power management clocks. + * @dev: Device to initialize the list of PM clocks for. * - * Allocate a struct pm_runtime_clk_data object, initialize its lock member and + * Allocate a struct pm_clk_data object, initialize its lock member and * make the @dev's power.subsys_data field point to it. */ -int pm_runtime_clk_init(struct device *dev) +int pm_clk_init(struct device *dev) { - struct pm_runtime_clk_data *prd; + struct pm_clk_data *pcd; - prd = kzalloc(sizeof(*prd), GFP_KERNEL); - if (!prd) { - dev_err(dev, "Not enough memory fo runtime PM data.\n"); + pcd = kzalloc(sizeof(*pcd), GFP_KERNEL); + if (!pcd) { + dev_err(dev, "Not enough memory for PM clock data.\n"); return -ENOMEM; } - INIT_LIST_HEAD(&prd->clock_list); - mutex_init(&prd->lock); - dev->power.subsys_data = prd; + INIT_LIST_HEAD(&pcd->clock_list); + mutex_init(&pcd->lock); + dev->power.subsys_data = pcd; return 0; } /** - * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks. - * @dev: Device to destroy the list of runtime PM clocks for. + * pm_clk_destroy - Destroy a device's list of power management clocks. + * @dev: Device to destroy the list of PM clocks for. * * Clear the @dev's power.subsys_data field, remove the list of clock entries - * from the struct pm_runtime_clk_data object pointed to by it before and free + * from the struct pm_clk_data object pointed to by it before and free * that object. */ -void pm_runtime_clk_destroy(struct device *dev) +void pm_clk_destroy(struct device *dev) { - struct pm_runtime_clk_data *prd = __to_prd(dev); + struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce, *c; - if (!prd) + if (!pcd) return; dev->power.subsys_data = NULL; - mutex_lock(&prd->lock); + mutex_lock(&pcd->lock); - list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node) - __pm_runtime_clk_remove(ce); + list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node) + __pm_clk_remove(ce); - mutex_unlock(&prd->lock); + mutex_unlock(&pcd->lock); - kfree(prd); + kfree(pcd); } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME + /** - * pm_runtime_clk_acquire - Acquire a device clock. + * pm_clk_acquire - Acquire a device clock. * @dev: Device whose clock is to be acquired. * @con_id: Connection ID of the clock. */ -static void pm_runtime_clk_acquire(struct device *dev, +static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) { ce->clk = clk_get(dev, ce->con_id); @@ -209,24 +213,24 @@ static void pm_runtime_clk_acquire(struct device *dev, } /** - * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list. + * pm_clk_suspend - Disable clocks in a device's PM clock list. * @dev: Device to disable the clocks for. */ -int pm_runtime_clk_suspend(struct device *dev) +int pm_clk_suspend(struct device *dev) { - struct pm_runtime_clk_data *prd = __to_prd(dev); + struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; dev_dbg(dev, "%s()\n", __func__); - if (!prd) + if (!pcd) return 0; - mutex_lock(&prd->lock); + mutex_lock(&pcd->lock); - list_for_each_entry_reverse(ce, &prd->clock_list, node) { + list_for_each_entry_reverse(ce, &pcd->clock_list, node) { if (ce->status == PCE_STATUS_NONE) - pm_runtime_clk_acquire(dev, ce); + pm_clk_acquire(dev, ce); if (ce->status < PCE_STATUS_ERROR) { clk_disable(ce->clk); @@ -234,30 +238,30 @@ int pm_runtime_clk_suspend(struct device *dev) } } - mutex_unlock(&prd->lock); + mutex_unlock(&pcd->lock); return 0; } /** - * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list. + * pm_clk_resume - Enable clocks in a device's PM clock list. * @dev: Device to enable the clocks for. */ -int pm_runtime_clk_resume(struct device *dev) +int pm_clk_resume(struct device *dev) { - struct pm_runtime_clk_data *prd = __to_prd(dev); + struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; dev_dbg(dev, "%s()\n", __func__); - if (!prd) + if (!pcd) return 0; - mutex_lock(&prd->lock); + mutex_lock(&pcd->lock); - list_for_each_entry(ce, &prd->clock_list, node) { + list_for_each_entry(ce, &pcd->clock_list, node) { if (ce->status == PCE_STATUS_NONE) - pm_runtime_clk_acquire(dev, ce); + pm_clk_acquire(dev, ce); if (ce->status < PCE_STATUS_ERROR) { clk_enable(ce->clk); @@ -265,28 +269,28 @@ int pm_runtime_clk_resume(struct device *dev) } } - mutex_unlock(&prd->lock); + mutex_unlock(&pcd->lock); return 0; } /** - * pm_runtime_clk_notify - Notify routine for device addition and removal. + * pm_clk_notify - Notify routine for device addition and removal. * @nb: Notifier block object this function is a member of. * @action: Operation being carried out by the caller. * @data: Device the routine is being run for. * * For this function to work, @nb must be a member of an object of type * struct pm_clk_notifier_block containing all of the requisite data. - * Specifically, the pwr_domain member of that object is copied to the device's - * pwr_domain field and its con_ids member is used to populate the device's list - * of runtime PM clocks, depending on @action. + * Specifically, the pm_domain member of that object is copied to the device's + * pm_domain field and its con_ids member is used to populate the device's list + * of PM clocks, depending on @action. * - * If the device's pwr_domain field is already populated with a value different + * If the device's pm_domain field is already populated with a value different * from the one stored in the struct pm_clk_notifier_block object, the function * does nothing. */ -static int pm_runtime_clk_notify(struct notifier_block *nb, +static int pm_clk_notify(struct notifier_block *nb, unsigned long action, void *data) { struct pm_clk_notifier_block *clknb; @@ -300,28 +304,28 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, switch (action) { case BUS_NOTIFY_ADD_DEVICE: - if (dev->pwr_domain) + if (dev->pm_domain) break; - error = pm_runtime_clk_init(dev); + error = pm_clk_init(dev); if (error) break; - dev->pwr_domain = clknb->pwr_domain; + dev->pm_domain = clknb->pm_domain; if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) - pm_runtime_clk_add(dev, *con_id); + pm_clk_add(dev, *con_id); } else { - pm_runtime_clk_add(dev, NULL); + pm_clk_add(dev, NULL); } break; case BUS_NOTIFY_DEL_DEVICE: - if (dev->pwr_domain != clknb->pwr_domain) + if (dev->pm_domain != clknb->pm_domain) break; - dev->pwr_domain = NULL; - pm_runtime_clk_destroy(dev); + dev->pm_domain = NULL; + pm_clk_destroy(dev); break; } @@ -330,6 +334,60 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, #else /* !CONFIG_PM_RUNTIME */ +#ifdef CONFIG_PM + +/** + * pm_clk_suspend - Disable clocks in a device's PM clock list. + * @dev: Device to disable the clocks for. + */ +int pm_clk_suspend(struct device *dev) +{ + struct pm_clk_data *pcd = __to_pcd(dev); + struct pm_clock_entry *ce; + + dev_dbg(dev, "%s()\n", __func__); + + /* If there is no driver, the clocks are already disabled. */ + if (!pcd || !dev->driver) + return 0; + + mutex_lock(&pcd->lock); + + list_for_each_entry_reverse(ce, &pcd->clock_list, node) + clk_disable(ce->clk); + + mutex_unlock(&pcd->lock); + + return 0; +} + +/** + * pm_clk_resume - Enable clocks in a device's PM clock list. + * @dev: Device to enable the clocks for. + */ +int pm_clk_resume(struct device *dev) +{ + struct pm_clk_data *pcd = __to_pcd(dev); + struct pm_clock_entry *ce; + + dev_dbg(dev, "%s()\n", __func__); + + /* If there is no driver, the clocks should remain disabled. */ + if (!pcd || !dev->driver) + return 0; + + mutex_lock(&pcd->lock); + + list_for_each_entry(ce, &pcd->clock_list, node) + clk_enable(ce->clk); + + mutex_unlock(&pcd->lock); + + return 0; +} + +#endif /* CONFIG_PM */ + /** * enable_clock - Enable a device clock. * @dev: Device whose clock is to be enabled. @@ -365,7 +423,7 @@ static void disable_clock(struct device *dev, const char *con_id) } /** - * pm_runtime_clk_notify - Notify routine for device addition and removal. + * pm_clk_notify - Notify routine for device addition and removal. * @nb: Notifier block object this function is a member of. * @action: Operation being carried out by the caller. * @data: Device the routine is being run for. @@ -375,7 +433,7 @@ static void disable_clock(struct device *dev, const char *con_id) * Specifically, the con_ids member of that object is used to enable or disable * the device's clocks, depending on @action. */ -static int pm_runtime_clk_notify(struct notifier_block *nb, +static int pm_clk_notify(struct notifier_block *nb, unsigned long action, void *data) { struct pm_clk_notifier_block *clknb; @@ -411,21 +469,21 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, #endif /* !CONFIG_PM_RUNTIME */ /** - * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks. + * pm_clk_add_notifier - Add bus type notifier for power management clocks. * @bus: Bus type to add the notifier to. * @clknb: Notifier to be added to the given bus type. * * The nb member of @clknb is not expected to be initialized and its - * notifier_call member will be replaced with pm_runtime_clk_notify(). However, + * notifier_call member will be replaced with pm_clk_notify(). However, * the remaining members of @clknb should be populated prior to calling this * routine. */ -void pm_runtime_clk_add_notifier(struct bus_type *bus, +void pm_clk_add_notifier(struct bus_type *bus, struct pm_clk_notifier_block *clknb) { if (!bus || !clknb) return; - clknb->nb.notifier_call = pm_runtime_clk_notify; + clknb->nb.notifier_call = pm_clk_notify; bus_register_notifier(bus, &clknb->nb); } diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c new file mode 100644 index 00000000000..be8714aa9dd --- /dev/null +++ b/drivers/base/power/domain.c @@ -0,0 +1,1273 @@ +/* + * drivers/base/power/domain.c - Common code related to device power domains. + * + * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp. + * + * This file is released under the GPLv2. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/pm_domain.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <linux/suspend.h> + +static LIST_HEAD(gpd_list); +static DEFINE_MUTEX(gpd_list_lock); + +#ifdef CONFIG_PM + +static struct generic_pm_domain *dev_to_genpd(struct device *dev) +{ + if (IS_ERR_OR_NULL(dev->pm_domain)) + return ERR_PTR(-EINVAL); + + return pd_to_genpd(dev->pm_domain); +} + +static void genpd_sd_counter_dec(struct generic_pm_domain *genpd) +{ + if (!WARN_ON(genpd->sd_count == 0)) + genpd->sd_count--; +} + +static void genpd_acquire_lock(struct generic_pm_domain *genpd) +{ + DEFINE_WAIT(wait); + + mutex_lock(&genpd->lock); + /* + * Wait for the domain to transition into either the active, + * or the power off state. + */ + for (;;) { + prepare_to_wait(&genpd->status_wait_queue, &wait, + TASK_UNINTERRUPTIBLE); + if (genpd->status == GPD_STATE_ACTIVE + || genpd->status == GPD_STATE_POWER_OFF) + break; + mutex_unlock(&genpd->lock); + + schedule(); + + mutex_lock(&genpd->lock); + } + finish_wait(&genpd->status_wait_queue, &wait); +} + +static void genpd_release_lock(struct generic_pm_domain *genpd) +{ + mutex_unlock(&genpd->lock); +} + +static void genpd_set_active(struct generic_pm_domain *genpd) +{ + if (genpd->resume_count == 0) + genpd->status = GPD_STATE_ACTIVE; +} + +/** + * pm_genpd_poweron - Restore power to a given PM domain and its parents. + * @genpd: PM domain to power up. + * + * Restore power to @genpd and all of its parents so that it is possible to + * resume a device belonging to it. + */ +int pm_genpd_poweron(struct generic_pm_domain *genpd) +{ + struct generic_pm_domain *parent = genpd->parent; + DEFINE_WAIT(wait); + int ret = 0; + + start: + if (parent) { + genpd_acquire_lock(parent); + mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING); + } else { + mutex_lock(&genpd->lock); + } + + if (genpd->status == GPD_STATE_ACTIVE + || (genpd->prepared_count > 0 && genpd->suspend_power_off)) + goto out; + + if (genpd->status != GPD_STATE_POWER_OFF) { + genpd_set_active(genpd); + goto out; + } + + if (parent && parent->status != GPD_STATE_ACTIVE) { + mutex_unlock(&genpd->lock); + genpd_release_lock(parent); + + ret = pm_genpd_poweron(parent); + if (ret) + return ret; + + goto start; + } + + if (genpd->power_on) { + int ret = genpd->power_on(genpd); + if (ret) + goto out; + } + + genpd_set_active(genpd); + if (parent) + parent->sd_count++; + + out: + mutex_unlock(&genpd->lock); + if (parent) + genpd_release_lock(parent); + + return ret; +} + +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME + +/** + * __pm_genpd_save_device - Save the pre-suspend state of a device. + * @dle: Device list entry of the device to save the state of. + * @genpd: PM domain the device belongs to. + */ +static int __pm_genpd_save_device(struct dev_list_entry *dle, + struct generic_pm_domain *genpd) + __releases(&genpd->lock) __acquires(&genpd->lock) +{ + struct device *dev = dle->dev; + struct device_driver *drv = dev->driver; + int ret = 0; + + if (dle->need_restore) + return 0; + + mutex_unlock(&genpd->lock); + + if (drv && drv->pm && drv->pm->runtime_suspend) { + if (genpd->start_device) + genpd->start_device(dev); + + ret = drv->pm->runtime_suspend(dev); + + if (genpd->stop_device) + genpd->stop_device(dev); + } + + mutex_lock(&genpd->lock); + + if (!ret) + dle->need_restore = true; + + return ret; +} + +/** + * __pm_genpd_restore_device - Restore the pre-suspend state of a device. + * @dle: Device list entry of the device to restore the state of. + * @genpd: PM domain the device belongs to. + */ +static void __pm_genpd_restore_device(struct dev_list_entry *dle, + struct generic_pm_domain *genpd) + __releases(&genpd->lock) __acquires(&genpd->lock) +{ + struct device *dev = dle->dev; + struct device_driver *drv = dev->driver; + + if (!dle->need_restore) + return; + + mutex_unlock(&genpd->lock); + + if (drv && drv->pm && drv->pm->runtime_resume) { + if (genpd->start_device) + genpd->start_device(dev); + + drv->pm->runtime_resume(dev); + + if (genpd->stop_device) + genpd->stop_device(dev); + } + + mutex_lock(&genpd->lock); + + dle->need_restore = false; +} + +/** + * genpd_abort_poweroff - Check if a PM domain power off should be aborted. + * @genpd: PM domain to check. + * + * Return true if a PM domain's status changed to GPD_STATE_ACTIVE during + * a "power off" operation, which means that a "power on" has occured in the + * meantime, or if its resume_count field is different from zero, which means + * that one of its devices has been resumed in the meantime. + */ +static bool genpd_abort_poweroff(struct generic_pm_domain *genpd) +{ + return genpd->status == GPD_STATE_ACTIVE || genpd->resume_count > 0; +} + +/** + * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff(). + * @genpd: PM domait to power off. + * + * Queue up the execution of pm_genpd_poweroff() unless it's already been done + * before. + */ +void genpd_queue_power_off_work(struct generic_pm_domain *genpd) +{ + if (!work_pending(&genpd->power_off_work)) + queue_work(pm_wq, &genpd->power_off_work); +} + +/** + * pm_genpd_poweroff - Remove power from a given PM domain. + * @genpd: PM domain to power down. + * + * If all of the @genpd's devices have been suspended and all of its subdomains + * have been powered down, run the runtime suspend callbacks provided by all of + * the @genpd's devices' drivers and remove power from @genpd. + */ +static int pm_genpd_poweroff(struct generic_pm_domain *genpd) + __releases(&genpd->lock) __acquires(&genpd->lock) +{ + struct generic_pm_domain *parent; + struct dev_list_entry *dle; + unsigned int not_suspended; + int ret = 0; + + start: + /* + * Do not try to power off the domain in the following situations: + * (1) The domain is already in the "power off" state. + * (2) System suspend is in progress. + * (3) One of the domain's devices is being resumed right now. + */ + if (genpd->status == GPD_STATE_POWER_OFF || genpd->prepared_count > 0 + || genpd->resume_count > 0) + return 0; + + if (genpd->sd_count > 0) + return -EBUSY; + + not_suspended = 0; + list_for_each_entry(dle, &genpd->dev_list, node) + if (dle->dev->driver && !pm_runtime_suspended(dle->dev)) + not_suspended++; + + if (not_suspended > genpd->in_progress) + return -EBUSY; + + if (genpd->poweroff_task) { + /* + * Another instance of pm_genpd_poweroff() is executing + * callbacks, so tell it to start over and return. + */ + genpd->status = GPD_STATE_REPEAT; + return 0; + } + + if (genpd->gov && genpd->gov->power_down_ok) { + if (!genpd->gov->power_down_ok(&genpd->domain)) + return -EAGAIN; + } + + genpd->status = GPD_STATE_BUSY; + genpd->poweroff_task = current; + + list_for_each_entry_reverse(dle, &genpd->dev_list, node) { + ret = __pm_genpd_save_device(dle, genpd); + if (ret) { + genpd_set_active(genpd); + goto out; + } + + if (genpd_abort_poweroff(genpd)) + goto out; + + if (genpd->status == GPD_STATE_REPEAT) { + genpd->poweroff_task = NULL; + goto start; + } + } + + parent = genpd->parent; + if (parent) { + mutex_unlock(&genpd->lock); + + genpd_acquire_lock(parent); + mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING); + + if (genpd_abort_poweroff(genpd)) { + genpd_release_lock(parent); + goto out; + } + } + + if (genpd->power_off) { + ret = genpd->power_off(genpd); + if (ret == -EBUSY) { + genpd_set_active(genpd); + if (parent) + genpd_release_lock(parent); + + goto out; + } + } + + genpd->status = GPD_STATE_POWER_OFF; + + if (parent) { + genpd_sd_counter_dec(parent); + if (parent->sd_count == 0) + genpd_queue_power_off_work(parent); + + genpd_release_lock(parent); + } + + out: + genpd->poweroff_task = NULL; + wake_up_all(&genpd->status_wait_queue); + return ret; +} + +/** + * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0. + * @work: Work structure used for scheduling the execution of this function. + */ +static void genpd_power_off_work_fn(struct work_struct *work) +{ + struct generic_pm_domain *genpd; + + genpd = container_of(work, struct generic_pm_domain, power_off_work); + + genpd_acquire_lock(genpd); + pm_genpd_poweroff(genpd); + genpd_release_lock(genpd); +} + +/** + * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. + * @dev: Device to suspend. + * + * Carry out a runtime suspend of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a PM domain consisting of I/O devices. + */ +static int pm_genpd_runtime_suspend(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->stop_device) { + int ret = genpd->stop_device(dev); + if (ret) + return ret; + } + + mutex_lock(&genpd->lock); + genpd->in_progress++; + pm_genpd_poweroff(genpd); + genpd->in_progress--; + mutex_unlock(&genpd->lock); + + return 0; +} + +/** + * __pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. + * @dev: Device to resume. + * @genpd: PM domain the device belongs to. + */ +static void __pm_genpd_runtime_resume(struct device *dev, + struct generic_pm_domain *genpd) +{ + struct dev_list_entry *dle; + + list_for_each_entry(dle, &genpd->dev_list, node) { + if (dle->dev == dev) { + __pm_genpd_restore_device(dle, genpd); + break; + } + } +} + +/** + * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. + * @dev: Device to resume. + * + * Carry out a runtime resume of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a PM domain consisting of I/O devices. + */ +static int pm_genpd_runtime_resume(struct device *dev) +{ + struct generic_pm_domain *genpd; + DEFINE_WAIT(wait); + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + ret = pm_genpd_poweron(genpd); + if (ret) + return ret; + + mutex_lock(&genpd->lock); + genpd->status = GPD_STATE_BUSY; + genpd->resume_count++; + for (;;) { + prepare_to_wait(&genpd->status_wait_queue, &wait, + TASK_UNINTERRUPTIBLE); + /* + * If current is the powering off task, we have been called + * reentrantly from one of the device callbacks, so we should + * not wait. + */ + if (!genpd->poweroff_task || genpd->poweroff_task == current) + break; + mutex_unlock(&genpd->lock); + + schedule(); + + mutex_lock(&genpd->lock); + } + finish_wait(&genpd->status_wait_queue, &wait); + __pm_genpd_runtime_resume(dev, genpd); + genpd->resume_count--; + genpd_set_active(genpd); + wake_up_all(&genpd->status_wait_queue); + mutex_unlock(&genpd->lock); + + if (genpd->start_device) + genpd->start_device(dev); + + return 0; +} + +#else + +static inline void genpd_power_off_work_fn(struct work_struct *work) {} +static inline void __pm_genpd_runtime_resume(struct device *dev, + struct generic_pm_domain *genpd) {} + +#define pm_genpd_runtime_suspend NULL +#define pm_genpd_runtime_resume NULL + +#endif /* CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_SLEEP + +/** + * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its parents. + * @genpd: PM domain to power off, if possible. + * + * Check if the given PM domain can be powered off (during system suspend or + * hibernation) and do that if so. Also, in that case propagate to its parent. + * + * This function is only called in "noirq" stages of system power transitions, + * so it need not acquire locks (all of the "noirq" callbacks are executed + * sequentially, so it is guaranteed that it will never run twice in parallel). + */ +static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd) +{ + struct generic_pm_domain *parent = genpd->parent; + + if (genpd->status == GPD_STATE_POWER_OFF) + return; + + if (genpd->suspended_count != genpd->device_count || genpd->sd_count > 0) + return; + + if (genpd->power_off) + genpd->power_off(genpd); + + genpd->status = GPD_STATE_POWER_OFF; + if (parent) { + genpd_sd_counter_dec(parent); + pm_genpd_sync_poweroff(parent); + } +} + +/** + * resume_needed - Check whether to resume a device before system suspend. + * @dev: Device to check. + * @genpd: PM domain the device belongs to. + * + * There are two cases in which a device that can wake up the system from sleep + * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled + * to wake up the system and it has to remain active for this purpose while the + * system is in the sleep state and (2) if the device is not enabled to wake up + * the system from sleep states and it generally doesn't generate wakeup signals + * by itself (those signals are generated on its behalf by other parts of the + * system). In the latter case it may be necessary to reconfigure the device's + * wakeup settings during system suspend, because it may have been set up to + * signal remote wakeup from the system's working state as needed by runtime PM. + * Return 'true' in either of the above cases. + */ +static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd) +{ + bool active_wakeup; + + if (!device_can_wakeup(dev)) + return false; + + active_wakeup = genpd->active_wakeup && genpd->active_wakeup(dev); + return device_may_wakeup(dev) ? active_wakeup : !active_wakeup; +} + +/** + * pm_genpd_prepare - Start power transition of a device in a PM domain. + * @dev: Device to start the transition of. + * + * Start a power transition of a device (during a system-wide power transition) + * under the assumption that its pm_domain field points to the domain member of + * an object of type struct generic_pm_domain representing a PM domain + * consisting of I/O devices. + */ +static int pm_genpd_prepare(struct device *dev) +{ + struct generic_pm_domain *genpd; + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + /* + * If a wakeup request is pending for the device, it should be woken up + * at this point and a system wakeup event should be reported if it's + * set up to wake up the system from sleep states. + */ + pm_runtime_get_noresume(dev); + if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); + + if (pm_wakeup_pending()) { + pm_runtime_put_sync(dev); + return -EBUSY; + } + + if (resume_needed(dev, genpd)) + pm_runtime_resume(dev); + + genpd_acquire_lock(genpd); + + if (genpd->prepared_count++ == 0) + genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF; + + genpd_release_lock(genpd); + + if (genpd->suspend_power_off) { + pm_runtime_put_noidle(dev); + return 0; + } + + /* + * The PM domain must be in the GPD_STATE_ACTIVE state at this point, + * so pm_genpd_poweron() will return immediately, but if the device + * is suspended (e.g. it's been stopped by .stop_device()), we need + * to make it operational. + */ + pm_runtime_resume(dev); + __pm_runtime_disable(dev, false); + + ret = pm_generic_prepare(dev); + if (ret) { + mutex_lock(&genpd->lock); + + if (--genpd->prepared_count == 0) + genpd->suspend_power_off = false; + + mutex_unlock(&genpd->lock); + pm_runtime_enable(dev); + } + + pm_runtime_put_sync(dev); + return ret; +} + +/** + * pm_genpd_suspend - Suspend a device belonging to an I/O PM domain. + * @dev: Device to suspend. + * + * Suspend a device under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a PM domain consisting of I/O devices. + */ +static int pm_genpd_suspend(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev); +} + +/** + * pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain. + * @dev: Device to suspend. + * + * Carry out a late suspend of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a PM domain consisting of I/O devices. + */ +static int pm_genpd_suspend_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off) + return 0; + + ret = pm_generic_suspend_noirq(dev); + if (ret) + return ret; + + if (device_may_wakeup(dev) + && genpd->active_wakeup && genpd->active_wakeup(dev)) + return 0; + + if (genpd->stop_device) + genpd->stop_device(dev); + + /* + * Since all of the "noirq" callbacks are executed sequentially, it is + * guaranteed that this function will never run twice in parallel for + * the same PM domain, so it is not necessary to use locking here. + */ + genpd->suspended_count++; + pm_genpd_sync_poweroff(genpd); + + return 0; +} + +/** + * pm_genpd_resume_noirq - Early resume of a device from an I/O power domain. + * @dev: Device to resume. + * + * Carry out an early resume of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_resume_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off) + return 0; + + /* + * Since all of the "noirq" callbacks are executed sequentially, it is + * guaranteed that this function will never run twice in parallel for + * the same PM domain, so it is not necessary to use locking here. + */ + pm_genpd_poweron(genpd); + genpd->suspended_count--; + if (genpd->start_device) + genpd->start_device(dev); + + return pm_generic_resume_noirq(dev); +} + +/** + * pm_genpd_resume - Resume a device belonging to an I/O power domain. + * @dev: Device to resume. + * + * Resume a device under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a power domain consisting of I/O devices. + */ +static int pm_genpd_resume(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_resume(dev); +} + +/** + * pm_genpd_freeze - Freeze a device belonging to an I/O power domain. + * @dev: Device to freeze. + * + * Freeze a device under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a power domain consisting of I/O devices. + */ +static int pm_genpd_freeze(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev); +} + +/** + * pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain. + * @dev: Device to freeze. + * + * Carry out a late freeze of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_freeze_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off) + return 0; + + ret = pm_generic_freeze_noirq(dev); + if (ret) + return ret; + + if (genpd->stop_device) + genpd->stop_device(dev); + + return 0; +} + +/** + * pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain. + * @dev: Device to thaw. + * + * Carry out an early thaw of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_thaw_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off) + return 0; + + if (genpd->start_device) + genpd->start_device(dev); + + return pm_generic_thaw_noirq(dev); +} + +/** + * pm_genpd_thaw - Thaw a device belonging to an I/O power domain. + * @dev: Device to thaw. + * + * Thaw a device under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a power domain consisting of I/O devices. + */ +static int pm_genpd_thaw(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev); +} + +/** + * pm_genpd_dev_poweroff - Power off a device belonging to an I/O PM domain. + * @dev: Device to suspend. + * + * Power off a device under the assumption that its pm_domain field points to + * the domain member of an object of type struct generic_pm_domain representing + * a PM domain consisting of I/O devices. + */ +static int pm_genpd_dev_poweroff(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_poweroff(dev); +} + +/** + * pm_genpd_dev_poweroff_noirq - Late power off of a device from a PM domain. + * @dev: Device to suspend. + * + * Carry out a late powering off of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a PM domain consisting of I/O devices. + */ +static int pm_genpd_dev_poweroff_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off) + return 0; + + ret = pm_generic_poweroff_noirq(dev); + if (ret) + return ret; + + if (device_may_wakeup(dev) + && genpd->active_wakeup && genpd->active_wakeup(dev)) + return 0; + + if (genpd->stop_device) + genpd->stop_device(dev); + + /* + * Since all of the "noirq" callbacks are executed sequentially, it is + * guaranteed that this function will never run twice in parallel for + * the same PM domain, so it is not necessary to use locking here. + */ + genpd->suspended_count++; + pm_genpd_sync_poweroff(genpd); + + return 0; +} + +/** + * pm_genpd_restore_noirq - Early restore of a device from an I/O power domain. + * @dev: Device to resume. + * + * Carry out an early restore of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_restore_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + /* + * Since all of the "noirq" callbacks are executed sequentially, it is + * guaranteed that this function will never run twice in parallel for + * the same PM domain, so it is not necessary to use locking here. + */ + genpd->status = GPD_STATE_POWER_OFF; + if (genpd->suspend_power_off) { + /* + * The boot kernel might put the domain into the power on state, + * so make sure it really is powered off. + */ + if (genpd->power_off) + genpd->power_off(genpd); + return 0; + } + + pm_genpd_poweron(genpd); + genpd->suspended_count--; + if (genpd->start_device) + genpd->start_device(dev); + + return pm_generic_restore_noirq(dev); +} + +/** + * pm_genpd_restore - Restore a device belonging to an I/O power domain. + * @dev: Device to resume. + * + * Restore a device under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a power domain consisting of I/O devices. + */ +static int pm_genpd_restore(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : pm_generic_restore(dev); +} + +/** + * pm_genpd_complete - Complete power transition of a device in a power domain. + * @dev: Device to complete the transition of. + * + * Complete a power transition of a device (during a system-wide power + * transition) under the assumption that its pm_domain field points to the + * domain member of an object of type struct generic_pm_domain representing + * a power domain consisting of I/O devices. + */ +static void pm_genpd_complete(struct device *dev) +{ + struct generic_pm_domain *genpd; + bool run_complete; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return; + + mutex_lock(&genpd->lock); + + run_complete = !genpd->suspend_power_off; + if (--genpd->prepared_count == 0) + genpd->suspend_power_off = false; + + mutex_unlock(&genpd->lock); + + if (run_complete) { + pm_generic_complete(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_idle(dev); + } +} + +#else + +#define pm_genpd_prepare NULL +#define pm_genpd_suspend NULL +#define pm_genpd_suspend_noirq NULL +#define pm_genpd_resume_noirq NULL +#define pm_genpd_resume NULL +#define pm_genpd_freeze NULL +#define pm_genpd_freeze_noirq NULL +#define pm_genpd_thaw_noirq NULL +#define pm_genpd_thaw NULL +#define pm_genpd_dev_poweroff_noirq NULL +#define pm_genpd_dev_poweroff NULL +#define pm_genpd_restore_noirq NULL +#define pm_genpd_restore NULL +#define pm_genpd_complete NULL + +#endif /* CONFIG_PM_SLEEP */ + +/** + * pm_genpd_add_device - Add a device to an I/O PM domain. + * @genpd: PM domain to add the device to. + * @dev: Device to be added. + */ +int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev) +{ + struct dev_list_entry *dle; + int ret = 0; + + dev_dbg(dev, "%s()\n", __func__); + + if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)) + return -EINVAL; + + genpd_acquire_lock(genpd); + + if (genpd->status == GPD_STATE_POWER_OFF) { + ret = -EINVAL; + goto out; + } + + if (genpd->prepared_count > 0) { + ret = -EAGAIN; + goto out; + } + + list_for_each_entry(dle, &genpd->dev_list, node) + if (dle->dev == dev) { + ret = -EINVAL; + goto out; + } + + dle = kzalloc(sizeof(*dle), GFP_KERNEL); + if (!dle) { + ret = -ENOMEM; + goto out; + } + + dle->dev = dev; + dle->need_restore = false; + list_add_tail(&dle->node, &genpd->dev_list); + genpd->device_count++; + + spin_lock_irq(&dev->power.lock); + dev->pm_domain = &genpd->domain; + spin_unlock_irq(&dev->power.lock); + + out: + genpd_release_lock(genpd); + + return ret; +} + +/** + * pm_genpd_remove_device - Remove a device from an I/O PM domain. + * @genpd: PM domain to remove the device from. + * @dev: Device to be removed. + */ +int pm_genpd_remove_device(struct generic_pm_domain *genpd, + struct device *dev) +{ + struct dev_list_entry *dle; + int ret = -EINVAL; + + dev_dbg(dev, "%s()\n", __func__); + + if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)) + return -EINVAL; + + genpd_acquire_lock(genpd); + + if (genpd->prepared_count > 0) { + ret = -EAGAIN; + goto out; + } + + list_for_each_entry(dle, &genpd->dev_list, node) { + if (dle->dev != dev) + continue; + + spin_lock_irq(&dev->power.lock); + dev->pm_domain = NULL; + spin_unlock_irq(&dev->power.lock); + + genpd->device_count--; + list_del(&dle->node); + kfree(dle); + + ret = 0; + break; + } + + out: + genpd_release_lock(genpd); + + return ret; +} + +/** + * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain. + * @genpd: Master PM domain to add the subdomain to. + * @new_subdomain: Subdomain to be added. + */ +int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, + struct generic_pm_domain *new_subdomain) +{ + struct generic_pm_domain *subdomain; + int ret = 0; + + if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(new_subdomain)) + return -EINVAL; + + start: + genpd_acquire_lock(genpd); + mutex_lock_nested(&new_subdomain->lock, SINGLE_DEPTH_NESTING); + + if (new_subdomain->status != GPD_STATE_POWER_OFF + && new_subdomain->status != GPD_STATE_ACTIVE) { + mutex_unlock(&new_subdomain->lock); + genpd_release_lock(genpd); + goto start; + } + + if (genpd->status == GPD_STATE_POWER_OFF + && new_subdomain->status != GPD_STATE_POWER_OFF) { + ret = -EINVAL; + goto out; + } + + list_for_each_entry(subdomain, &genpd->sd_list, sd_node) { + if (subdomain == new_subdomain) { + ret = -EINVAL; + goto out; + } + } + + list_add_tail(&new_subdomain->sd_node, &genpd->sd_list); + new_subdomain->parent = genpd; + if (subdomain->status != GPD_STATE_POWER_OFF) + genpd->sd_count++; + + out: + mutex_unlock(&new_subdomain->lock); + genpd_release_lock(genpd); + + return ret; +} + +/** + * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain. + * @genpd: Master PM domain to remove the subdomain from. + * @target: Subdomain to be removed. + */ +int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, + struct generic_pm_domain *target) +{ + struct generic_pm_domain *subdomain; + int ret = -EINVAL; + + if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(target)) + return -EINVAL; + + start: + genpd_acquire_lock(genpd); + + list_for_each_entry(subdomain, &genpd->sd_list, sd_node) { + if (subdomain != target) + continue; + + mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); + + if (subdomain->status != GPD_STATE_POWER_OFF + && subdomain->status != GPD_STATE_ACTIVE) { + mutex_unlock(&subdomain->lock); + genpd_release_lock(genpd); + goto start; + } + + list_del(&subdomain->sd_node); + subdomain->parent = NULL; + if (subdomain->status != GPD_STATE_POWER_OFF) + genpd_sd_counter_dec(genpd); + + mutex_unlock(&subdomain->lock); + + ret = 0; + break; + } + + genpd_release_lock(genpd); + + return ret; +} + +/** + * pm_genpd_init - Initialize a generic I/O PM domain object. + * @genpd: PM domain object to initialize. + * @gov: PM domain governor to associate with the domain (may be NULL). + * @is_off: Initial value of the domain's power_is_off field. + */ +void pm_genpd_init(struct generic_pm_domain *genpd, + struct dev_power_governor *gov, bool is_off) +{ + if (IS_ERR_OR_NULL(genpd)) + return; + + INIT_LIST_HEAD(&genpd->sd_node); + genpd->parent = NULL; + INIT_LIST_HEAD(&genpd->dev_list); + INIT_LIST_HEAD(&genpd->sd_list); + mutex_init(&genpd->lock); + genpd->gov = gov; + INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn); + genpd->in_progress = 0; + genpd->sd_count = 0; + genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE; + init_waitqueue_head(&genpd->status_wait_queue); + genpd->poweroff_task = NULL; + genpd->resume_count = 0; + genpd->device_count = 0; + genpd->suspended_count = 0; + genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; + genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; + genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; + genpd->domain.ops.prepare = pm_genpd_prepare; + genpd->domain.ops.suspend = pm_genpd_suspend; + genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq; + genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq; + genpd->domain.ops.resume = pm_genpd_resume; + genpd->domain.ops.freeze = pm_genpd_freeze; + genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq; + genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq; + genpd->domain.ops.thaw = pm_genpd_thaw; + genpd->domain.ops.poweroff = pm_genpd_dev_poweroff; + genpd->domain.ops.poweroff_noirq = pm_genpd_dev_poweroff_noirq; + genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq; + genpd->domain.ops.restore = pm_genpd_restore; + genpd->domain.ops.complete = pm_genpd_complete; + mutex_lock(&gpd_list_lock); + list_add(&genpd->gpd_list_node, &gpd_list); + mutex_unlock(&gpd_list_lock); +} + +/** + * pm_genpd_poweroff_unused - Power off all PM domains with no devices in use. + */ +void pm_genpd_poweroff_unused(void) +{ + struct generic_pm_domain *genpd; + + mutex_lock(&gpd_list_lock); + + list_for_each_entry(genpd, &gpd_list, gpd_list_node) + genpd_queue_power_off_work(genpd); + + mutex_unlock(&gpd_list_lock); +} diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index cb3bb368681..9508df71274 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -94,12 +94,13 @@ int pm_generic_prepare(struct device *dev) * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback. * @dev: Device to handle. * @event: PM transition of the system under way. + * @bool: Whether or not this is the "noirq" stage. * * If the device has not been suspended at run time, execute the * suspend/freeze/poweroff/thaw callback provided by its driver, if defined, and * return its error code. Otherwise, return zero. */ -static int __pm_generic_call(struct device *dev, int event) +static int __pm_generic_call(struct device *dev, int event, bool noirq) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int (*callback)(struct device *); @@ -109,16 +110,16 @@ static int __pm_generic_call(struct device *dev, int event) switch (event) { case PM_EVENT_SUSPEND: - callback = pm->suspend; + callback = noirq ? pm->suspend_noirq : pm->suspend; break; case PM_EVENT_FREEZE: - callback = pm->freeze; + callback = noirq ? pm->freeze_noirq : pm->freeze; break; case PM_EVENT_HIBERNATE: - callback = pm->poweroff; + callback = noirq ? pm->poweroff_noirq : pm->poweroff; break; case PM_EVENT_THAW: - callback = pm->thaw; + callback = noirq ? pm->thaw_noirq : pm->thaw; break; default: callback = NULL; @@ -129,42 +130,82 @@ static int __pm_generic_call(struct device *dev, int event) } /** + * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems. + * @dev: Device to suspend. + */ +int pm_generic_suspend_noirq(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_SUSPEND, true); +} +EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq); + +/** * pm_generic_suspend - Generic suspend callback for subsystems. * @dev: Device to suspend. */ int pm_generic_suspend(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_SUSPEND); + return __pm_generic_call(dev, PM_EVENT_SUSPEND, false); } EXPORT_SYMBOL_GPL(pm_generic_suspend); /** + * pm_generic_freeze_noirq - Generic freeze_noirq callback for subsystems. + * @dev: Device to freeze. + */ +int pm_generic_freeze_noirq(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_FREEZE, true); +} +EXPORT_SYMBOL_GPL(pm_generic_freeze_noirq); + +/** * pm_generic_freeze - Generic freeze callback for subsystems. * @dev: Device to freeze. */ int pm_generic_freeze(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_FREEZE); + return __pm_generic_call(dev, PM_EVENT_FREEZE, false); } EXPORT_SYMBOL_GPL(pm_generic_freeze); /** + * pm_generic_poweroff_noirq - Generic poweroff_noirq callback for subsystems. + * @dev: Device to handle. + */ +int pm_generic_poweroff_noirq(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_HIBERNATE, true); +} +EXPORT_SYMBOL_GPL(pm_generic_poweroff_noirq); + +/** * pm_generic_poweroff - Generic poweroff callback for subsystems. * @dev: Device to handle. */ int pm_generic_poweroff(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_HIBERNATE); + return __pm_generic_call(dev, PM_EVENT_HIBERNATE, false); } EXPORT_SYMBOL_GPL(pm_generic_poweroff); /** + * pm_generic_thaw_noirq - Generic thaw_noirq callback for subsystems. + * @dev: Device to thaw. + */ +int pm_generic_thaw_noirq(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_THAW, true); +} +EXPORT_SYMBOL_GPL(pm_generic_thaw_noirq); + +/** * pm_generic_thaw - Generic thaw callback for subsystems. * @dev: Device to thaw. */ int pm_generic_thaw(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_THAW); + return __pm_generic_call(dev, PM_EVENT_THAW, false); } EXPORT_SYMBOL_GPL(pm_generic_thaw); @@ -172,12 +213,13 @@ EXPORT_SYMBOL_GPL(pm_generic_thaw); * __pm_generic_resume - Generic resume/restore callback for subsystems. * @dev: Device to handle. * @event: PM transition of the system under way. + * @bool: Whether or not this is the "noirq" stage. * * Execute the resume/resotre callback provided by the @dev's driver, if * defined. If it returns 0, change the device's runtime PM status to 'active'. * Return the callback's error code. */ -static int __pm_generic_resume(struct device *dev, int event) +static int __pm_generic_resume(struct device *dev, int event, bool noirq) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int (*callback)(struct device *); @@ -188,10 +230,10 @@ static int __pm_generic_resume(struct device *dev, int event) switch (event) { case PM_EVENT_RESUME: - callback = pm->resume; + callback = noirq ? pm->resume_noirq : pm->resume; break; case PM_EVENT_RESTORE: - callback = pm->restore; + callback = noirq ? pm->restore_noirq : pm->restore; break; default: callback = NULL; @@ -202,7 +244,7 @@ static int __pm_generic_resume(struct device *dev, int event) return 0; ret = callback(dev); - if (!ret && pm_runtime_enabled(dev)) { + if (!ret && !noirq && pm_runtime_enabled(dev)) { pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -212,22 +254,42 @@ static int __pm_generic_resume(struct device *dev, int event) } /** + * pm_generic_resume_noirq - Generic resume_noirq callback for subsystems. + * @dev: Device to resume. + */ +int pm_generic_resume_noirq(struct device *dev) +{ + return __pm_generic_resume(dev, PM_EVENT_RESUME, true); +} +EXPORT_SYMBOL_GPL(pm_generic_resume_noirq); + +/** * pm_generic_resume - Generic resume callback for subsystems. * @dev: Device to resume. */ int pm_generic_resume(struct device *dev) { - return __pm_generic_resume(dev, PM_EVENT_RESUME); + return __pm_generic_resume(dev, PM_EVENT_RESUME, false); } EXPORT_SYMBOL_GPL(pm_generic_resume); /** + * pm_generic_restore_noirq - Generic restore_noirq callback for subsystems. + * @dev: Device to restore. + */ +int pm_generic_restore_noirq(struct device *dev) +{ + return __pm_generic_resume(dev, PM_EVENT_RESTORE, true); +} +EXPORT_SYMBOL_GPL(pm_generic_restore_noirq); + +/** * pm_generic_restore - Generic restore callback for subsystems. * @dev: Device to restore. */ int pm_generic_restore(struct device *dev) { - return __pm_generic_resume(dev, PM_EVENT_RESTORE); + return __pm_generic_resume(dev, PM_EVENT_RESTORE, false); } EXPORT_SYMBOL_GPL(pm_generic_restore); @@ -256,11 +318,17 @@ struct dev_pm_ops generic_subsys_pm_ops = { #ifdef CONFIG_PM_SLEEP .prepare = pm_generic_prepare, .suspend = pm_generic_suspend, + .suspend_noirq = pm_generic_suspend_noirq, .resume = pm_generic_resume, + .resume_noirq = pm_generic_resume_noirq, .freeze = pm_generic_freeze, + .freeze_noirq = pm_generic_freeze_noirq, .thaw = pm_generic_thaw, + .thaw_noirq = pm_generic_thaw_noirq, .poweroff = pm_generic_poweroff, + .poweroff_noirq = pm_generic_poweroff_noirq, .restore = pm_generic_restore, + .restore_noirq = pm_generic_restore_noirq, .complete = pm_generic_complete, #endif #ifdef CONFIG_PM_RUNTIME diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 06f09bf89cb..a85459126bc 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -425,9 +425,9 @@ static int device_resume_noirq(struct device *dev, pm_message_t state) TRACE_DEVICE(dev); TRACE_RESUME(0); - if (dev->pwr_domain) { + if (dev->pm_domain) { pm_dev_dbg(dev, state, "EARLY power domain "); - error = pm_noirq_op(dev, &dev->pwr_domain->ops, state); + error = pm_noirq_op(dev, &dev->pm_domain->ops, state); } else if (dev->type && dev->type->pm) { pm_dev_dbg(dev, state, "EARLY type "); error = pm_noirq_op(dev, dev->type->pm, state); @@ -505,6 +505,7 @@ static int legacy_resume(struct device *dev, int (*cb)(struct device *dev)) static int device_resume(struct device *dev, pm_message_t state, bool async) { int error = 0; + bool put = false; TRACE_DEVICE(dev); TRACE_RESUME(0); @@ -521,9 +522,12 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) if (!dev->power.is_suspended) goto Unlock; - if (dev->pwr_domain) { + pm_runtime_enable(dev); + put = true; + + if (dev->pm_domain) { pm_dev_dbg(dev, state, "power domain "); - error = pm_op(dev, &dev->pwr_domain->ops, state); + error = pm_op(dev, &dev->pm_domain->ops, state); goto End; } @@ -563,6 +567,10 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) complete_all(&dev->power.completion); TRACE_RESUME(error); + + if (put) + pm_runtime_put_sync(dev); + return error; } @@ -641,10 +649,10 @@ static void device_complete(struct device *dev, pm_message_t state) { device_lock(dev); - if (dev->pwr_domain) { + if (dev->pm_domain) { pm_dev_dbg(dev, state, "completing power domain "); - if (dev->pwr_domain->ops.complete) - dev->pwr_domain->ops.complete(dev); + if (dev->pm_domain->ops.complete) + dev->pm_domain->ops.complete(dev); } else if (dev->type && dev->type->pm) { pm_dev_dbg(dev, state, "completing type "); if (dev->type->pm->complete) @@ -744,9 +752,9 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state) { int error; - if (dev->pwr_domain) { + if (dev->pm_domain) { pm_dev_dbg(dev, state, "LATE power domain "); - error = pm_noirq_op(dev, &dev->pwr_domain->ops, state); + error = pm_noirq_op(dev, &dev->pm_domain->ops, state); if (error) return error; } else if (dev->type && dev->type->pm) { @@ -843,19 +851,25 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) int error = 0; dpm_wait_for_children(dev, async); - device_lock(dev); if (async_error) - goto Unlock; + return 0; + + pm_runtime_get_noresume(dev); + if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); if (pm_wakeup_pending()) { + pm_runtime_put_sync(dev); async_error = -EBUSY; - goto Unlock; + return 0; } - if (dev->pwr_domain) { + device_lock(dev); + + if (dev->pm_domain) { pm_dev_dbg(dev, state, "power domain "); - error = pm_op(dev, &dev->pwr_domain->ops, state); + error = pm_op(dev, &dev->pm_domain->ops, state); goto End; } @@ -890,12 +904,15 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) End: dev->power.is_suspended = !error; - Unlock: device_unlock(dev); complete_all(&dev->power.completion); - if (error) + if (error) { + pm_runtime_put_sync(dev); async_error = error; + } else if (dev->power.is_suspended) { + __pm_runtime_disable(dev, false); + } return error; } @@ -982,11 +999,11 @@ static int device_prepare(struct device *dev, pm_message_t state) device_lock(dev); - if (dev->pwr_domain) { + if (dev->pm_domain) { pm_dev_dbg(dev, state, "preparing power domain "); - if (dev->pwr_domain->ops.prepare) - error = dev->pwr_domain->ops.prepare(dev); - suspend_report_result(dev->pwr_domain->ops.prepare, error); + if (dev->pm_domain->ops.prepare) + error = dev->pm_domain->ops.prepare(dev); + suspend_report_result(dev->pm_domain->ops.prepare, error); if (error) goto End; } else if (dev->type && dev->type->pm) { @@ -1035,13 +1052,7 @@ int dpm_prepare(pm_message_t state) get_device(dev); mutex_unlock(&dpm_list_mtx); - pm_runtime_get_noresume(dev); - if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) - pm_wakeup_event(dev, 0); - - pm_runtime_put_sync(dev); - error = pm_wakeup_pending() ? - -EBUSY : device_prepare(dev, state); + error = device_prepare(dev, state); mutex_lock(&dpm_list_mtx); if (error) { diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 56a6899f5e9..5cc12322ef3 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -625,4 +625,21 @@ int opp_init_cpufreq_table(struct device *dev, return 0; } + +/** + * opp_free_cpufreq_table() - free the cpufreq table + * @dev: device for which we do this operation + * @table: table to free + * + * Free up the table allocated by opp_init_cpufreq_table + */ +void opp_free_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + if (!table) + return; + + kfree(*table); + *table = NULL; +} #endif /* CONFIG_CPU_FREQ */ diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 0d4587b15c5..8dc247c974a 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1,5 +1,5 @@ /* - * drivers/base/power/runtime.c - Helper functions for device run-time PM + * drivers/base/power/runtime.c - Helper functions for device runtime PM * * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. * Copyright (C) 2010 Alan Stern <stern@rowland.harvard.edu> @@ -135,8 +135,9 @@ static int rpm_check_suspend_allowed(struct device *dev) if (dev->power.runtime_error) retval = -EINVAL; - else if (atomic_read(&dev->power.usage_count) > 0 - || dev->power.disable_depth > 0) + else if (dev->power.disable_depth > 0) + retval = -EACCES; + else if (atomic_read(&dev->power.usage_count) > 0) retval = -EAGAIN; else if (!pm_children_suspended(dev)) retval = -EBUSY; @@ -158,7 +159,7 @@ static int rpm_check_suspend_allowed(struct device *dev) * @dev: Device to notify the bus type about. * @rpmflags: Flag bits. * - * Check if the device's run-time PM status allows it to be suspended. If + * Check if the device's runtime PM status allows it to be suspended. If * another idle notification has been started earlier, return immediately. If * the RPM_ASYNC flag is set then queue an idle-notification request; otherwise * run the ->runtime_idle() callback directly. @@ -213,8 +214,8 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.idle_notification = true; - if (dev->pwr_domain) - callback = dev->pwr_domain->ops.runtime_idle; + if (dev->pm_domain) + callback = dev->pm_domain->ops.runtime_idle; else if (dev->type && dev->type->pm) callback = dev->type->pm->runtime_idle; else if (dev->class && dev->class->pm) @@ -262,15 +263,15 @@ static int rpm_callback(int (*cb)(struct device *), struct device *dev) spin_lock_irq(&dev->power.lock); } dev->power.runtime_error = retval; - return retval; + return retval != -EACCES ? retval : -EIO; } /** - * rpm_suspend - Carry out run-time suspend of given device. + * rpm_suspend - Carry out runtime suspend of given device. * @dev: Device to suspend. * @rpmflags: Flag bits. * - * Check if the device's run-time PM status allows it to be suspended. If + * Check if the device's runtime PM status allows it to be suspended. If * another suspend has been started earlier, either return immediately or wait * for it to finish, depending on the RPM_NOWAIT and RPM_ASYNC flags. Cancel a * pending idle notification. If the RPM_ASYNC flag is set then queue a @@ -374,8 +375,8 @@ static int rpm_suspend(struct device *dev, int rpmflags) __update_runtime_status(dev, RPM_SUSPENDING); - if (dev->pwr_domain) - callback = dev->pwr_domain->ops.runtime_suspend; + if (dev->pm_domain) + callback = dev->pm_domain->ops.runtime_suspend; else if (dev->type && dev->type->pm) callback = dev->type->pm->runtime_suspend; else if (dev->class && dev->class->pm) @@ -388,7 +389,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) retval = rpm_callback(callback, dev); if (retval) { __update_runtime_status(dev, RPM_ACTIVE); - dev->power.deferred_resume = 0; + dev->power.deferred_resume = false; if (retval == -EAGAIN || retval == -EBUSY) dev->power.runtime_error = 0; else @@ -429,11 +430,11 @@ static int rpm_suspend(struct device *dev, int rpmflags) } /** - * rpm_resume - Carry out run-time resume of given device. + * rpm_resume - Carry out runtime resume of given device. * @dev: Device to resume. * @rpmflags: Flag bits. * - * Check if the device's run-time PM status allows it to be resumed. Cancel + * Check if the device's runtime PM status allows it to be resumed. Cancel * any scheduled or pending requests. If another resume has been started * earlier, either return immediately or wait for it to finish, depending on the * RPM_NOWAIT and RPM_ASYNC flags. Similarly, if there's a suspend running in @@ -458,7 +459,7 @@ static int rpm_resume(struct device *dev, int rpmflags) if (dev->power.runtime_error) retval = -EINVAL; else if (dev->power.disable_depth > 0) - retval = -EAGAIN; + retval = -EACCES; if (retval) goto out; @@ -550,7 +551,7 @@ static int rpm_resume(struct device *dev, int rpmflags) spin_lock(&parent->power.lock); /* - * We can resume if the parent's run-time PM is disabled or it + * We can resume if the parent's runtime PM is disabled or it * is set to ignore children. */ if (!parent->power.disable_depth @@ -573,8 +574,8 @@ static int rpm_resume(struct device *dev, int rpmflags) __update_runtime_status(dev, RPM_RESUMING); - if (dev->pwr_domain) - callback = dev->pwr_domain->ops.runtime_resume; + if (dev->pm_domain) + callback = dev->pm_domain->ops.runtime_resume; else if (dev->type && dev->type->pm) callback = dev->type->pm->runtime_resume; else if (dev->class && dev->class->pm) @@ -614,11 +615,11 @@ static int rpm_resume(struct device *dev, int rpmflags) } /** - * pm_runtime_work - Universal run-time PM work function. + * pm_runtime_work - Universal runtime PM work function. * @work: Work structure used for scheduling the execution of this function. * * Use @work to get the device object the work is to be done for, determine what - * is to be done and execute the appropriate run-time PM function. + * is to be done and execute the appropriate runtime PM function. */ static void pm_runtime_work(struct work_struct *work) { @@ -717,7 +718,7 @@ int pm_schedule_suspend(struct device *dev, unsigned int delay) EXPORT_SYMBOL_GPL(pm_schedule_suspend); /** - * __pm_runtime_idle - Entry point for run-time idle operations. + * __pm_runtime_idle - Entry point for runtime idle operations. * @dev: Device to send idle notification for. * @rpmflags: Flag bits. * @@ -746,7 +747,7 @@ int __pm_runtime_idle(struct device *dev, int rpmflags) EXPORT_SYMBOL_GPL(__pm_runtime_idle); /** - * __pm_runtime_suspend - Entry point for run-time put/suspend operations. + * __pm_runtime_suspend - Entry point for runtime put/suspend operations. * @dev: Device to suspend. * @rpmflags: Flag bits. * @@ -775,7 +776,7 @@ int __pm_runtime_suspend(struct device *dev, int rpmflags) EXPORT_SYMBOL_GPL(__pm_runtime_suspend); /** - * __pm_runtime_resume - Entry point for run-time resume operations. + * __pm_runtime_resume - Entry point for runtime resume operations. * @dev: Device to resume. * @rpmflags: Flag bits. * @@ -801,11 +802,11 @@ int __pm_runtime_resume(struct device *dev, int rpmflags) EXPORT_SYMBOL_GPL(__pm_runtime_resume); /** - * __pm_runtime_set_status - Set run-time PM status of a device. + * __pm_runtime_set_status - Set runtime PM status of a device. * @dev: Device to handle. - * @status: New run-time PM status of the device. + * @status: New runtime PM status of the device. * - * If run-time PM of the device is disabled or its power.runtime_error field is + * If runtime PM of the device is disabled or its power.runtime_error field is * different from zero, the status may be changed either to RPM_ACTIVE, or to * RPM_SUSPENDED, as long as that reflects the actual state of the device. * However, if the device has a parent and the parent is not active, and the @@ -851,7 +852,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) /* * It is invalid to put an active child under a parent that is - * not active, has run-time PM enabled and the + * not active, has runtime PM enabled and the * 'power.ignore_children' flag unset. */ if (!parent->power.disable_depth @@ -885,7 +886,7 @@ EXPORT_SYMBOL_GPL(__pm_runtime_set_status); * @dev: Device to handle. * * Flush all pending requests for the device from pm_wq and wait for all - * run-time PM operations involving the device in progress to complete. + * runtime PM operations involving the device in progress to complete. * * Should be called under dev->power.lock with interrupts disabled. */ @@ -933,7 +934,7 @@ static void __pm_runtime_barrier(struct device *dev) * Prevent the device from being suspended by incrementing its usage counter and * if there's a pending resume request for the device, wake the device up. * Next, make sure that all pending requests for the device have been flushed - * from pm_wq and wait for all run-time PM operations involving the device in + * from pm_wq and wait for all runtime PM operations involving the device in * progress to complete. * * Return value: @@ -963,18 +964,18 @@ int pm_runtime_barrier(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_barrier); /** - * __pm_runtime_disable - Disable run-time PM of a device. + * __pm_runtime_disable - Disable runtime PM of a device. * @dev: Device to handle. * @check_resume: If set, check if there's a resume request for the device. * * Increment power.disable_depth for the device and if was zero previously, - * cancel all pending run-time PM requests for the device and wait for all + * cancel all pending runtime PM requests for the device and wait for all * operations in progress to complete. The device can be either active or - * suspended after its run-time PM has been disabled. + * suspended after its runtime PM has been disabled. * * If @check_resume is set and there's a resume request pending when * __pm_runtime_disable() is called and power.disable_depth is zero, the - * function will wake up the device before disabling its run-time PM. + * function will wake up the device before disabling its runtime PM. */ void __pm_runtime_disable(struct device *dev, bool check_resume) { @@ -987,7 +988,7 @@ void __pm_runtime_disable(struct device *dev, bool check_resume) /* * Wake up the device if there's a resume request pending, because that - * means there probably is some I/O to process and disabling run-time PM + * means there probably is some I/O to process and disabling runtime PM * shouldn't prevent the device from processing the I/O. */ if (check_resume && dev->power.request_pending @@ -1012,7 +1013,7 @@ void __pm_runtime_disable(struct device *dev, bool check_resume) EXPORT_SYMBOL_GPL(__pm_runtime_disable); /** - * pm_runtime_enable - Enable run-time PM of a device. + * pm_runtime_enable - Enable runtime PM of a device. * @dev: Device to handle. */ void pm_runtime_enable(struct device *dev) @@ -1031,7 +1032,7 @@ void pm_runtime_enable(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_enable); /** - * pm_runtime_forbid - Block run-time PM of a device. + * pm_runtime_forbid - Block runtime PM of a device. * @dev: Device to handle. * * Increase the device's usage count and clear its power.runtime_auto flag, @@ -1054,7 +1055,7 @@ void pm_runtime_forbid(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_forbid); /** - * pm_runtime_allow - Unblock run-time PM of a device. + * pm_runtime_allow - Unblock runtime PM of a device. * @dev: Device to handle. * * Decrease the device's usage count and set its power.runtime_auto flag. @@ -1075,12 +1076,12 @@ void pm_runtime_allow(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_allow); /** - * pm_runtime_no_callbacks - Ignore run-time PM callbacks for a device. + * pm_runtime_no_callbacks - Ignore runtime PM callbacks for a device. * @dev: Device to handle. * * Set the power.no_callbacks flag, which tells the PM core that this - * device is power-managed through its parent and has no run-time PM - * callbacks of its own. The run-time sysfs attributes will be removed. + * device is power-managed through its parent and has no runtime PM + * callbacks of its own. The runtime sysfs attributes will be removed. */ void pm_runtime_no_callbacks(struct device *dev) { @@ -1156,8 +1157,8 @@ static void update_autosuspend(struct device *dev, int old_delay, int old_use) * @delay: Value of the new delay in milliseconds. * * Set the device's power.autosuspend_delay value. If it changes to negative - * and the power.use_autosuspend flag is set, prevent run-time suspends. If it - * changes the other way, allow run-time suspends. + * and the power.use_autosuspend flag is set, prevent runtime suspends. If it + * changes the other way, allow runtime suspends. */ void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) { @@ -1177,7 +1178,7 @@ EXPORT_SYMBOL_GPL(pm_runtime_set_autosuspend_delay); * @dev: Device to handle. * @use: New value for use_autosuspend. * - * Set the device's power.use_autosuspend flag, and allow or prevent run-time + * Set the device's power.use_autosuspend flag, and allow or prevent runtime * suspends as needed. */ void __pm_runtime_use_autosuspend(struct device *dev, bool use) @@ -1194,7 +1195,7 @@ void __pm_runtime_use_autosuspend(struct device *dev, bool use) EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend); /** - * pm_runtime_init - Initialize run-time PM fields in given device object. + * pm_runtime_init - Initialize runtime PM fields in given device object. * @dev: Device object to initialize. */ void pm_runtime_init(struct device *dev) diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index a9f5b897961..942d6a7c9ae 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -116,12 +116,14 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr, cp = memchr(buf, '\n', n); if (cp) len = cp - buf; + device_lock(dev); if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0) pm_runtime_allow(dev); else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0) pm_runtime_forbid(dev); else - return -EINVAL; + n = -EINVAL; + device_unlock(dev); return n; } @@ -205,7 +207,9 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev, if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay) return -EINVAL; + device_lock(dev); pm_runtime_set_autosuspend_delay(dev, delay); + device_unlock(dev); return n; } diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index c80e138b62f..af10abecb99 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -112,7 +112,7 @@ static unsigned int read_magic_time(void) unsigned int val; get_rtc_time(&time); - pr_info("Time: %2d:%02d:%02d Date: %02d/%02d/%02d\n", + pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n", time.tm_hour, time.tm_min, time.tm_sec, time.tm_mon + 1, time.tm_mday, time.tm_year % 100); val = time.tm_year; /* 100 years */ diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index 548708c4b2b..a7346ab97a3 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -606,7 +606,7 @@ static int apm_suspend_notifier(struct notifier_block *nb, return NOTIFY_OK; /* interrupted by signal */ - return NOTIFY_BAD; + return notifier_from_errno(err); case PM_POST_SUSPEND: /* diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 46767c53917..12d1e81a8ab 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -18,6 +18,7 @@ #include <linux/sched.h> #include <linux/cpu.h> #include <linux/pm_runtime.h> +#include <linux/suspend.h> #include "pci.h" struct pci_dynid { @@ -616,6 +617,21 @@ static int pci_pm_prepare(struct device *dev) int error = 0; /* + * If a PCI device configured to wake up the system from sleep states + * has been suspended at run time and there's a resume request pending + * for it, this is equivalent to the device signaling wakeup, so the + * system suspend operation should be aborted. + */ + pm_runtime_get_noresume(dev); + if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); + + if (pm_wakeup_pending()) { + pm_runtime_put_sync(dev); + return -EBUSY; + } + + /* * PCI devices suspended at run time need to be resumed at this * point, because in general it is necessary to reconfigure them for * system suspend. Namely, if the device is supposed to wake up the @@ -624,7 +640,7 @@ static int pci_pm_prepare(struct device *dev) * system from the sleep state, we'll have to prevent it from signaling * wake-up. */ - pm_runtime_get_sync(dev); + pm_runtime_resume(dev); if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c index 12ef9121d4f..11312f401c7 100644 --- a/drivers/s390/char/vmwatchdog.c +++ b/drivers/s390/char/vmwatchdog.c @@ -258,13 +258,13 @@ static int vmwdt_suspend(void) if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) { pr_err("The system cannot be suspended while the watchdog" " is in use\n"); - return NOTIFY_BAD; + return notifier_from_errno(-EBUSY); } if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) { clear_bit(VMWDT_OPEN, &vmwdt_is_open); pr_err("The system cannot be suspended while the watchdog" " is running\n"); - return NOTIFY_BAD; + return notifier_from_errno(-EBUSY); } return NOTIFY_DONE; } diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index c47b25fd3f4..92d7324acb1 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -814,8 +814,8 @@ static int css_power_event(struct notifier_block *this, unsigned long event, mutex_unlock(&css->mutex); continue; } - if (__chsc_do_secm(css, 0)) - ret = NOTIFY_BAD; + ret = __chsc_do_secm(css, 0); + ret = notifier_from_errno(ret); mutex_unlock(&css->mutex); } break; @@ -831,8 +831,8 @@ static int css_power_event(struct notifier_block *this, unsigned long event, mutex_unlock(&css->mutex); continue; } - if (__chsc_do_secm(css, 1)) - ret = NOTIFY_BAD; + ret = __chsc_do_secm(css, 1); + ret = notifier_from_errno(ret); mutex_unlock(&css->mutex); } /* search for subchannels, which appeared during hibernation */ diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index d70e91ae60a..d82a023a901 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -144,9 +144,9 @@ int scsi_autopm_get_device(struct scsi_device *sdev) int err; err = pm_runtime_get_sync(&sdev->sdev_gendev); - if (err < 0) + if (err < 0 && err !=-EACCES) pm_runtime_put_sync(&sdev->sdev_gendev); - else if (err > 0) + else err = 0; return err; } @@ -173,9 +173,9 @@ int scsi_autopm_get_host(struct Scsi_Host *shost) int err; err = pm_runtime_get_sync(&shost->shost_gendev); - if (err < 0) + if (err < 0 && err !=-EACCES) pm_runtime_put_sync(&shost->shost_gendev); - else if (err > 0) + else err = 0; return err; } |