Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...

34 files changed, 38 insertions, 38 deletions

diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index e35865af96e..ce5b9fca9c1 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -205,7 +205,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
 		ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
 					clk_get_rate(s3c_freq->hclk) / 1000);
 		if (ret < 0) {
-			pr_err("cpufreq: Failed to to set the armdiv to %lukHz: %d\n",
+			pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
 			       clk_get_rate(s3c_freq->hclk) / 1000, ret);
 			return ret;
 		}
diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index 0b5af7d0edb..c385cc5e730 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -92,7 +92,7 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct drm_device *dev,
 
 	ret = drm_framebuffer_init(dev, &fb_cma->fb, &drm_fb_cma_funcs);
 	if (ret) {
-		dev_err(dev->dev, "Failed to initalize framebuffer: %d\n", ret);
+		dev_err(dev->dev, "Failed to initialize framebuffer: %d\n", ret);
 		kfree(fb_cma);
 		return ERR_PTR(ret);
 	}
@@ -376,7 +376,7 @@ struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev,
 
 	ret = drm_fb_helper_initial_config(helper, preferred_bpp);
 	if (ret < 0) {
-		dev_err(dev->dev, "Failed to set inital hw configuration.\n");
+		dev_err(dev->dev, "Failed to set initial hw configuration.\n");
 		goto err_drm_fb_helper_fini;
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index b1746741bc5..665ced3b731 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -230,7 +230,7 @@ static int radeonfb_create(struct drm_fb_helper *helper,
 
 	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
 	if (ret) {
-		DRM_ERROR("failed to initalise framebuffer %d\n", ret);
+		DRM_ERROR("failed to initialize framebuffer %d\n", ret);
 		goto out_unref;
 	}
 
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 41712f09651..2693129055c 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -1587,7 +1587,7 @@ isert_put_nopin(struct iscsi_cmd *cmd, struct iscsi_conn *conn,
 	isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
 	isert_init_send_wr(isert_cmd, send_wr);
 
-	pr_debug("Posting NOPIN Reponse IB_WR_SEND >>>>>>>>>>>>>>>>>>>>>>\n");
+	pr_debug("Posting NOPIN Response IB_WR_SEND >>>>>>>>>>>>>>>>>>>>>>\n");
 
 	return isert_post_response(isert_conn, isert_cmd);
 }
diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c
index ee6ae3a0017..a0af8b2506c 100644
--- a/drivers/input/misc/da9055_onkey.c
+++ b/drivers/input/misc/da9055_onkey.c
@@ -36,7 +36,7 @@ static void da9055_onkey_query(struct da9055_onkey *onkey)
 	} else {
 		key_stat &= DA9055_NOKEY_STS;
 		/*
-		 * Onkey status bit is cleared when onkey button is relased.
+		 * Onkey status bit is cleared when onkey button is released.
 		 */
 		if (!key_stat) {
 			input_report_key(onkey->input, KEY_POWER, 0);
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 5b9ac32801c..a35d8d10016 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -70,7 +70,7 @@
 /*H:320
  * The page table code is curly enough to need helper functions to keep it
  * clear and clean.  The kernel itself provides many of them; one advantage
- * of insisting that the Guest and Host use the same CONFIG_PAE setting.
+ * of insisting that the Guest and Host use the same CONFIG_X86_PAE setting.
  *
  * There are two functions which return pointers to the shadow (aka "real")
  * page tables.
diff --git a/drivers/md/bcache/bset.c b/drivers/md/bcache/bset.c
index cb4578a327b..1d27d3af325 100644
--- a/drivers/md/bcache/bset.c
+++ b/drivers/md/bcache/bset.c
@@ -395,7 +395,7 @@ void inorder_test(void)
 #endif
 
 /*
- * Cacheline/offset <-> bkey pointer arithmatic:
+ * Cacheline/offset <-> bkey pointer arithmetic:
  *
  * t->tree is a binary search tree in an array; each node corresponds to a key
  * in one cacheline in t->set (BSET_CACHELINE bytes).
@@ -404,7 +404,7 @@ void inorder_test(void)
  * the binary tree points to; to_inorder() gives us the cacheline, and then
  * bkey_float->m gives us the offset within that cacheline, in units of 8 bytes.
  *
- * cacheline_to_bkey() and friends abstract out all the pointer arithmatic to
+ * cacheline_to_bkey() and friends abstract out all the pointer arithmetic to
  * make this work.
  *
  * To construct the bfloat for an arbitrary key we need to know what the key
diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index 0c8e45949b1..7b6dba3ce55 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -2919,7 +2919,7 @@ enum stv0367_cab_signal_type stv0367cab_algo(struct stv0367_state *state,
 	if (tuner_lock == 0)
 		return FE_367CAB_NOTUNER;
 #endif
-	/* Relase the TRL to start demodulator acquisition */
+	/* Release the TRL to start demodulator acquisition */
 	/* Wait for QAM lock */
 	LockTime = 0;
 	stv0367_writereg(state, R367CAB_CTRL_1, 0x00);
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 004fd0b4e9d..436a62a995e 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -59,4 +59,4 @@ config VIDEO_EXYNOS4_FIMC_IS
 	  To compile this driver as a module, choose M here: the
 	  module will be called exynos4-fimc-is.
 
-endif # VIDEO_SAMSUNG_S5P_FIMC
+endif # VIDEO_SAMSUNG_EXYNOS4_IS
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index 00b07032f4f..5296385153d 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -954,7 +954,7 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq,
 		psize[0] = ctx->dec_src_buf_size;
 		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
 	} else {
-		mfc_err("This video node is dedicated to decoding. Decoding not initalised\n");
+		mfc_err("This video node is dedicated to decoding. Decoding not initialized\n");
 		return -EINVAL;
 	}
 	return 0;
diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c
index c37eeedfe21..4d0db15df11 100644
--- a/drivers/misc/dummy-irq.c
+++ b/drivers/misc/dummy-irq.c
@@ -26,7 +26,7 @@ static irqreturn_t dummy_interrupt(int irq, void *dev_id)
 	static int count = 0;
 
 	if (count == 0) {
-		printk(KERN_INFO "dummy-irq: interrupt occured on IRQ %d\n",
+		printk(KERN_INFO "dummy-irq: interrupt occurred on IRQ %d\n",
 				irq);
 		count++;
 	}
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index bb26f086bd8..61fbe6acabe 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -170,7 +170,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 
 	/* Check result */
 	if (status & FPGA_STATUS_DONE)
-		dev_info(&spi->dev, "FPGA succesfully configured!\n");
+		dev_info(&spi->dev, "FPGA successfully configured!\n");
 	else
 		dev_info(&spi->dev, "FPGA not configured (DONE not set)\n");
 
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 565027b1bc7..f9296abcf02 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -139,7 +139,7 @@ int mei_hbm_start_wait(struct mei_device *dev)
 
 	if (ret <= 0 && (dev->hbm_state <= MEI_HBM_START)) {
 		dev->hbm_state = MEI_HBM_IDLE;
-		dev_err(&dev->pdev->dev, "wating for mei start failed\n");
+		dev_err(&dev->pdev->dev, "waiting for mei start failed\n");
 		return -ETIMEDOUT;
 	}
 	return 0;
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 6fc573cef17..ed1d75203af 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -38,7 +38,7 @@ const char *mei_dev_state_str(int state)
 	MEI_DEV_STATE(POWER_DOWN);
 	MEI_DEV_STATE(POWER_UP);
 	default:
-		return "unkown";
+		return "unknown";
 	}
 #undef MEI_DEV_STATE
 }
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index d971817182f..82dc5748f87 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -92,7 +92,7 @@ int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
 static int xpc_disengage_min_timelimit;	/* = 0 */
 static int xpc_disengage_max_timelimit = 120;
 
-static ctl_table xpc_sys_xpc_hb_dir[] = {
+static struct ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
 	 .procname = "hb_interval",
 	 .data = &xpc_hb_interval,
@@ -111,7 +111,7 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
 	 .extra2 = &xpc_hb_check_max_interval},
 	{}
 };
-static ctl_table xpc_sys_xpc_dir[] = {
+static struct ctl_table xpc_sys_xpc_dir[] = {
 	{
 	 .procname = "hb",
 	 .mode = 0555,
@@ -126,7 +126,7 @@ static ctl_table xpc_sys_xpc_dir[] = {
 	 .extra2 = &xpc_disengage_max_timelimit},
 	{}
 };
-static ctl_table xpc_sys_dir[] = {
+static struct ctl_table xpc_sys_dir[] = {
 	{
 	 .procname = "xpc",
 	 .mode = 0555,
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 115b0da6e01..9979ebcf2a0 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -2014,7 +2014,7 @@ out:
  *  Verify the reset block is not blocking us from resetting.  Acquire
  *  semaphore (if necessary) and read/set/write the device control reset
  *  bit in the PHY.  Wait the appropriate delay time for the device to
- *  reset and relase the semaphore (if necessary).
+ *  reset and release the semaphore (if necessary).
  **/
 s32 igb_phy_hw_reset(struct e1000_hw *hw)
 {
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 8a434997a0d..264ddeb846a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"
 static bool enable_64b_cqe_eqe;
 module_param(enable_64b_cqe_eqe, bool, 0444);
 MODULE_PARM_DESC(enable_64b_cqe_eqe,
-		 "Enable 64 byte CQEs/EQEs when the the FW supports this");
+		 "Enable 64 byte CQEs/EQEs when the FW supports this");
 
 #define HCA_GLOBAL_CAP_MASK            0
 
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index cbfaed5f2f8..5a20eaf903d 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -3444,7 +3444,7 @@ static int vxge_device_register(struct __vxge_hw_device *hldev,
 	}
 
 	vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
-		"%s : checksuming enabled", __func__);
+		"%s : checksumming enabled", __func__);
 
 	if (high_dma) {
 		ndev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 196b2d10040..8b59a710a4a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -1675,7 +1675,7 @@ static int qlcnic_sriov_vf_handle_dev_ready(struct qlcnic_adapter *adapter)
 			qlcnic_sriov_vf_attach(adapter);
 			adapter->fw_fail_cnt = 0;
 			dev_info(dev,
-				 "%s: Reinitalization of VF 0x%x done after FW reset\n",
+				 "%s: Reinitialization of VF 0x%x done after FW reset\n",
 				 __func__, func);
 		} else {
 			dev_err(dev,
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 3c2cbc9d629..f985cf32452 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -28,7 +28,7 @@ config ATH9K
 	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
 	  of chipsets. For a specific list of supported external
 	  cards, laptops that already ship with these cards and
-	  APs that come with these cards refer to to ath9k wiki
+	  APs that come with these cards refer to ath9k wiki
 	  products page:
 
 	  http://wireless.kernel.org/en/users/Drivers/ath9k/products
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 8f6f2baa930..ec269e6f037 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -1697,7 +1697,7 @@ static int pn533_poll_complete(struct pn533 *dev, void *arg,
 		goto done;
 
 	if (!dev->poll_mod_count) {
-		nfc_dev_dbg(&dev->interface->dev, "Polling has been stoped.");
+		nfc_dev_dbg(&dev->interface->dev, "Polling has been stopped.");
 		goto done;
 	}
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 808be06bb67..6bb7cf2de55 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -709,7 +709,7 @@ void __init unflatten_device_tree(void)
 	__unflatten_device_tree(initial_boot_params, &of_allnodes,
 				early_init_dt_alloc_memory_arch);
 
-	/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
+	/* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */
 	of_alias_scan(early_init_dt_alloc_memory_arch);
 }
 
diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c
index 37b56fd716e..4ec19cbee57 100644
--- a/drivers/of/pdt.c
+++ b/drivers/of/pdt.c
@@ -251,6 +251,6 @@ void __init of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops)
 	of_allnodes->child = of_pdt_build_tree(of_allnodes,
 			of_pdt_prom_ops->getchild(of_allnodes->phandle), &nextp);
 
-	/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
+	/* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */
 	of_alias_scan(kernel_tree_alloc);
 }
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index c180e3135b3..64c467998a9 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -89,7 +89,7 @@ static DEFINE_MUTEX(vmur_mutex);
  * urd references:
  * - ur_probe gets a urd reference, ur_remove drops the reference
  *   dev_get_drvdata(&cdev->dev)
- * - ur_open gets a urd reference, ur_relase drops the reference
+ * - ur_open gets a urd reference, ur_release drops the reference
  *   (urf->urd)
  *
  * cdev references:
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 823ff287322..dc3bb81cff0 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -693,7 +693,7 @@ p_status:
  * it's own message.
  * 
  * If MSG_OUT is == HOST_MSG, also interrupt the host and take a message.
- * This is done to allow the hsot to send messages outside of an identify
+ * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
  * BDR message in response to a bad reselection would leave us pointed to
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 09c81b2f216..5fd0f1fbe58 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2043,7 +2043,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd)
 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
 		return SUCCESS;
 	}
-	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
+	/* grab a ref so the fsp and sc_cmd cannot be released from under us */
 	fc_fcp_pkt_hold(fsp);
 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
 
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 552e8a2b6f5..92deec5ed7d 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -558,7 +558,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task)
 	if (!rc) {
 		iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. "
 				  "Target has sent more R2Ts than it "
-				  "negotiated for or driver has has leaked.\n");
+				  "negotiated for or driver has leaked.\n");
 		return ISCSI_ERR_PROTO;
 	}
 
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 302514d8157..1c5e7d233e7 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -3204,7 +3204,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	case OPC_OUB_DEREG_DEV:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unresgister the deviece\n"));
+			pm8001_printk("unregister the device\n"));
 		pm8001_mpi_dereg_resp(pm8001_ha, piomb);
 		break;
 	case OPC_OUB_GET_DEV_HANDLE:
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 8e1b7377506..1eb7b0280a4 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -6092,7 +6092,7 @@ static int __init pmcraid_init(void)
 
 	if (IS_ERR(pmcraid_class)) {
 		error = PTR_ERR(pmcraid_class);
-		pmcraid_err("failed to register with with sysfs, error = %x\n",
+		pmcraid_err("failed to register with sysfs, error = %x\n",
 			    error);
 		goto out_unreg_chrdev;
 	}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index f43de1e5642..ade98e23fb2 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -538,7 +538,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
 
 /**
  * scsi_try_host_reset - ask host adapter to reset itself
- * @scmd:	SCSI cmd to send hsot reset.
+ * @scmd:	SCSI cmd to send host reset.
  */
 static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 {
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 9799d043a9b..ee7c8123c37 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1377,7 +1377,7 @@ static int __init tegra_uart_init(void)
 
 	ret = platform_driver_register(&tegra_uart_platform_driver);
 	if (ret < 0) {
-		pr_err("Uart platfrom driver register failed, e = %d\n", ret);
+		pr_err("Uart platform driver register failed, e = %d\n", ret);
 		uart_unregister_driver(&tegra_uart_driver);
 		return ret;
 	}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index e1b661d0402..5233804d66b 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -551,7 +551,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata) {
 			dev_err(&pdev->dev,
-				"failed to allocate musb platfrom data\n");
+				"failed to allocate musb platform data\n");
 			ret = -ENOMEM;
 			goto err2;
 		}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 4315d351fc7..6708a3b78ad 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -514,7 +514,7 @@ static int omap2430_probe(struct platform_device *pdev)
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata) {
 			dev_err(&pdev->dev,
-				"failed to allocate musb platfrom data\n");
+				"failed to allocate musb platform data\n");
 			goto err2;
 		}
 
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index f94ead6a318..860b18014ad 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -527,7 +527,7 @@ static int n8x0_panel_update(struct omap_dss_device *dssdev,
 	dh = dssdev->panel.timings.y_res;
 
 	if (x != 0 || y != 0 || w != dw || h != dh) {
-		dev_err(&dssdev->dev, "invaid update region %d, %d, %d, %d\n",
+		dev_err(&dssdev->dev, "invalid update region %d, %d, %d, %d\n",
 			x, y, w, h);
 		return -EINVAL;
 	}