diff options
| author | Dave Jones <davej@redhat.com> | 2006-06-29 16:01:54 -0400 |
|---|---|---|
| committer | Dave Jones <davej@redhat.com> | 2006-06-29 16:01:54 -0400 |
| commit | 55b4d6a52195a8f277ffddf755ddaff359878f41 (patch) | |
| tree | 06a3183a562f8da4688f65023f7a18dcad702956 /include/asm-arm | |
| parent | adf8a287150667feb5747f8beade62acacc17d4e (diff) | |
| parent | 1f1332f727c3229eb2166a83fec5d3de6a73dce2 (diff) | |
Merge ../linus
Conflicts:
drivers/char/agp/Kconfig
Diffstat (limited to 'include/asm-arm')
172 files changed, 3882 insertions, 486 deletions
diff --git a/include/asm-arm/apm.h b/include/asm-arm/apm.h index 3a50eb759c2..d09113b37e4 100644 --- a/include/asm-arm/apm.h +++ b/include/asm-arm/apm.h @@ -13,7 +13,6 @@ #ifndef ARM_ASM_SA1100_APM_H #define ARM_ASM_SA1100_APM_H -#include <linux/config.h> #include <linux/apm_bios.h> /* diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h index 8d67907fd4f..d710204ac74 100644 --- a/include/asm-arm/arch-aaec2000/io.h +++ b/include/asm-arm/arch-aaec2000/io.h @@ -16,6 +16,5 @@ */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h index d8209f8911d..24b51cccde8 100644 --- a/include/asm-arm/arch-aaec2000/memory.h +++ b/include/asm-arm/arch-aaec2000/memory.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <linux/config.h> #define PHYS_OFFSET UL(0xf0000000) diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h new file mode 100644 index 00000000000..bff5ea45f60 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h @@ -0,0 +1,81 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Serial Peripheral Interface (SPI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SPI_H +#define AT91RM9200_SPI_H + +#define AT91_SPI_CR 0x00 /* Control Register */ +#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ +#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ +#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_MR 0x04 /* Mode Register */ +#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ +#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ +#define AT91_SPI_PS_FIXED (0 << 1) +#define AT91_SPI_PS_VARIABLE (1 << 1) +#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection */ +#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ +#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ + +#define AT91_SPI_RDR 0x08 /* Receive Data Register */ +#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ + +#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ +#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_SR 0x10 /* Status Register */ +#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ +#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ +#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ +#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ +#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ +#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ +#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ +#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ +#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ +#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ +#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ + +#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ +#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ +#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ +#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ +#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ +#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ +#define AT91_SPI_BITS_8 (0 << 4) +#define AT91_SPI_BITS_9 (1 << 4) +#define AT91_SPI_BITS_10 (2 << 4) +#define AT91_SPI_BITS_11 (3 << 4) +#define AT91_SPI_BITS_12 (4 << 4) +#define AT91_SPI_BITS_13 (5 << 4) +#define AT91_SPI_BITS_14 (6 << 4) +#define AT91_SPI_BITS_15 (7 << 4) +#define AT91_SPI_BITS_16 (8 << 4) +#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ +#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ +#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h new file mode 100644 index 00000000000..ac880227147 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h @@ -0,0 +1,96 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h + * + * Copyright (C) SAN People + * + * Serial Synchronous Controller (SSC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SSC_H +#define AT91RM9200_SSC_H + +#define AT91_SSC_CR 0x00 /* Control Register */ +#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ +#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ +#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ +#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ +#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ + +#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ +#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ + +#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ +#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ +#define AT91_SSC_CKS_DIV (0 << 0) +#define AT91_SSC_CKS_CLOCK (1 << 0) +#define AT91_SSC_CKS_PIN (2 << 0) +#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ +#define AT91_SSC_CKO_NONE (0 << 2) +#define AT91_SSC_CKO_CONTINUOUS (1 << 2) +#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ +#define AT91_SSC_CKI_FALLING (0 << 5) +#define AT91_SSC_CK_RISING (1 << 5) +#define AT91_SSC_START (0xf << 8) /* Start Selection */ +#define AT91_SSC_START_CONTINUOUS (0 << 8) +#define AT91_SSC_START_TX_RX (1 << 8) +#define AT91_SSC_START_LOW_RF (2 << 8) +#define AT91_SSC_START_HIGH_RF (3 << 8) +#define AT91_SSC_START_FALLING_RF (4 << 8) +#define AT91_SSC_START_RISING_RF (5 << 8) +#define AT91_SSC_START_LEVEL_RF (6 << 8) +#define AT91_SSC_START_EDGE_RF (7 << 8) +#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ +#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ + +#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ +#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ +#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ +#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ +#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ +#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ +#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ +#define AT91_SSC_FSOS_NONE (0 << 20) +#define AT91_SSC_FSOS_NEGATIVE (1 << 20) +#define AT91_SSC_FSOS_POSITIVE (2 << 20) +#define AT91_SSC_FSOS_LOW (3 << 20) +#define AT91_SSC_FSOS_HIGH (4 << 20) +#define AT91_SSC_FSOS_TOGGLE (5 << 20) +#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ +#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) +#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) + +#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ +#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ +#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ +#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ + +#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ +#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ +#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ +#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ + +#define AT91_SSC_SR 0x40 /* Status Register */ +#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ +#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ +#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ +#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ +#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ +#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ +#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ +#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ +#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ +#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ +#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ +#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ + +#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ +#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ +#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h index 2910d359f91..0f4c12d5f0c 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h @@ -68,8 +68,17 @@ #define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ #define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ #define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ + #define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ #define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ +#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ +#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ +#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ +#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ +#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ +#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ +#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ +#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ /* @@ -241,7 +250,7 @@ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ #define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define At91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ +#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ #define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ #define AT91_RTC_CENT (0x7f << 0) /* Current Century */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h new file mode 100644 index 00000000000..f4da752bb0c --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h @@ -0,0 +1,146 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h + * + * Copyright (C) SAN People + * + * Timer/Counter Unit (TC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_TC_H +#define AT91RM9200_TC_H + +#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ +#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ + +#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ +#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ +#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) +#define AT91_TC_TC0XC0S_NONE (1 << 0) +#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) +#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) +#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ +#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) +#define AT91_TC_TC1XC1S_NONE (1 << 2) +#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) +#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) +#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ +#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) +#define AT91_TC_TC2XC2S_NONE (1 << 4) +#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) +#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) + + +#define AT91_TC_CCR 0x00 /* Channel Control Register */ +#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ +#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ +#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ + +#define AT91_TC_CMR 0x04 /* Channel Mode Register */ +#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ +#define AT91_TC_TIMER_CLOCK1 (0 << 0) +#define AT91_TC_TIMER_CLOCK2 (1 << 0) +#define AT91_TC_TIMER_CLOCK3 (2 << 0) +#define AT91_TC_TIMER_CLOCK4 (3 << 0) +#define AT91_TC_TIMER_CLOCK5 (4 << 0) +#define AT91_TC_XC0 (5 << 0) +#define AT91_TC_XC1 (6 << 0) +#define AT91_TC_XC2 (7 << 0) +#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ +#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ +#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ +#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ +#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ +#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ +#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ +#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ +#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ +#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ + +#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ +#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ +#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ +#define AT91_TC_EEVTEDG_NONE (0 << 8) +#define AT91_TC_EEVTEDG_RISING (1 << 8) +#define AT91_TC_EEVTEDG_FALLING (2 << 8) +#define AT91_TC_EEVTEDG_BOTH (3 << 8) +#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ +#define AT91_TC_EEVT_TIOB (0 << 10) +#define AT91_TC_EEVT_XC0 (1 << 10) +#define AT91_TC_EEVT_XC1 (2 << 10) +#define AT91_TC_EEVT_XC2 (3 << 10) +#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ +#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ +#define AT91_TC_WAVESEL_UP (0 << 13) +#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) +#define AT91_TC_WAVESEL_UPDOWN (1 << 13) +#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) +#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ +#define AT91_TC_ACPA_NONE (0 << 16) +#define AT91_TC_ACPA_SET (1 << 16) +#define AT91_TC_ACPA_CLEAR (2 << 16) +#define AT91_TC_ACPA_TOGGLE (3 << 16) +#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ +#define AT91_TC_ACPC_NONE (0 << 18) +#define AT91_TC_ACPC_SET (1 << 18) +#define AT91_TC_ACPC_CLEAR (2 << 18) +#define AT91_TC_ACPC_TOGGLE (3 << 18) +#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ +#define AT91_TC_AEEVT_NONE (0 << 20) +#define AT91_TC_AEEVT_SET (1 << 20) +#define AT91_TC_AEEVT_CLEAR (2 << 20) +#define AT91_TC_AEEVT_TOGGLE (3 << 20) +#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ +#define AT91_TC_ASWTRG_NONE (0 << 22) +#define AT91_TC_ASWTRG_SET (1 << 22) +#define AT91_TC_ASWTRG_CLEAR (2 << 22) +#define AT91_TC_ASWTRG_TOGGLE (3 << 22) +#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ +#define AT91_TC_BCPB_NONE (0 << 24) +#define AT91_TC_BCPB_SET (1 << 24) +#define AT91_TC_BCPB_CLEAR (2 << 24) +#define AT91_TC_BCPB_TOGGLE (3 << 24) +#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ +#define AT91_TC_BCPC_NONE (0 << 26) +#define AT91_TC_BCPC_SET (1 << 26) +#define AT91_TC_BCPC_CLEAR (2 << 26) +#define AT91_TC_BCPC_TOGGLE (3 << 26) +#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ +#define AT91_TC_BEEVT_NONE (0 << 28) +#define AT91_TC_BEEVT_SET (1 << 28) +#define AT91_TC_BEEVT_CLEAR (2 << 28) +#define AT91_TC_BEEVT_TOGGLE (3 << 28) +#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ +#define AT91_TC_BSWTRG_NONE (0 << 30) +#define AT91_TC_BSWTRG_SET (1 << 30) +#define AT91_TC_BSWTRG_CLEAR (2 << 30) +#define AT91_TC_BSWTRG_TOGGLE (3 << 30) + +#define AT91_TC_CV 0x10 /* Counter Value */ +#define AT91_TC_RA 0x14 /* Register A */ +#define AT91_TC_RB 0x18 /* Register B */ +#define AT91_TC_RC 0x1c /* Register C */ + +#define AT91_TC_SR 0x20 /* Status Register */ +#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ +#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ +#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ +#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ +#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ +#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ +#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ +#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ +#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ +#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ +#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ + +#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h new file mode 100644 index 00000000000..951e3f61cef --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h @@ -0,0 +1,77 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * USB Device Port (UDP) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_UDP_H +#define AT91RM9200_UDP_H + +#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ +#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ +#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ +#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ + +#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ +#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ +#define AT91_UDP_CONFG (1 << 1) /* Configured */ +#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ +#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ +#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ + +#define AT91_UDP_FADDR 0x08 /* Function Address Register */ +#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ +#define AT91_UDP_FEN (1 << 8) /* Function Enable */ + +#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ +#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ +#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ + +#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ +#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ +#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ +#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ +#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */ +#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ +#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ +#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */ + +#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ +#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ + +#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */ +#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ +#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ +#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ +#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ +#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ +#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ +#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ +#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ +#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ +#define AT91_UDP_EPTYPE_CTRL (0 << 8) +#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) +#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) +#define AT91_UDP_EPTYPE_INT_OUT (3 << 8) +#define AT91_UDP_EPTYPE_ISO_IN (5 << 8) +#define AT91_UDP_EPTYPE_BULK_IN (6 << 8) +#define AT91_UDP_EPTYPE_INT_IN (7 << 8) +#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ +#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ +#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ + +#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */ + +#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ +#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index 4fdef13d01d..1fdd70b2380 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -31,14 +31,9 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H - /* Clocks */ -extern unsigned long at91_master_clock; - - /* Serial Port */ -extern int at91_serial_map[AT91_NR_UART]; -extern int at91_console_port; - #include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/spi/spi.h> /* USB Device */ struct at91_udc_data { @@ -91,10 +86,25 @@ struct at91_nand_data { extern void __init at91_add_device_nand(struct at91_nand_data *data); /* I2C*/ -void __init at91_add_device_i2c(void); +extern void __init at91_add_device_i2c(void); + + /* SPI */ +extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - /* RTC */ -void __init at91_add_device_rtc(void); + /* Serial */ +struct at91_uart_config { + unsigned short console_tty; /* tty number of serial console */ + unsigned short nr_tty; /* number of serial tty's */ + short tty_map[]; /* map UART to tty number */ +}; +extern struct platform_device *at91_default_console_device; +extern void __init at91_init_serial(struct at91_uart_config *config); + +struct at91_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ +}; +extern void __init at91_add_device_serial(void); /* LEDs */ extern u8 at91_leds_cpu; diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 6176ab2dc41..dbde1baaf25 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_AT91RM9200_GPIO_H #define __ASM_ARCH_AT91RM9200_GPIO_H +#include <asm/irq.h> + #define PIN_BASE NR_AIC_IRQS #define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ @@ -188,6 +190,9 @@ extern int at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin); + +extern void at91_gpio_suspend(void); +extern void at91_gpio_resume(void); #endif #endif diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 59e6f44d3a0..235d39d9110 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -50,9 +50,12 @@ #define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) /* Internal SRAM */ -#define AT91_BASE_SRAM 0x00200000 /* Internal SRAM base address */ +#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ #define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ + /* Internal SRAM is mapped below the IO devices */ +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) + /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ @@ -81,14 +84,14 @@ static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - return readl(addr + reg_offset); + return __raw_readl(addr + reg_offset); } static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - writel(value, addr + reg_offset); + __raw_writel(value, addr + reg_offset); } #endif diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h index 23e670d85c9..88fd1bebcef 100644 --- a/include/asm-arm/arch-at91rm9200/io.h +++ b/include/asm-arm/arch-at91rm9200/io.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include <asm/arch/at91rm9200.h> #include <asm/io.h> #define IO_SPACE_LIMIT 0xFFFFFFFF diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index 27b0497f1b3..2dc93b174a8 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -37,8 +37,6 @@ * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. */ -#include <asm/arch/gpio.h> - #define NR_IRQS (NR_AIC_IRQS + (4 * 32)) diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h index 462f1f0ad67..f985069e6d0 100644 --- a/include/asm-arm/arch-at91rm9200/memory.h +++ b/include/asm-arm/arch-at91rm9200/memory.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define PHYS_OFFSET (AT91_SDRAM_BASE) @@ -33,9 +33,7 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus__is_a_macro #define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt__is_a_macro #define __bus_to_virt(x) __phys_to_virt(x) #endif diff --git a/include/asm-arm/arch-at91rm9200/pio.h b/include/asm-arm/arch-at91rm9200/pio.h deleted file mode 100644 index a89501b4a70..00000000000 --- a/include/asm-arm/arch-at91rm9200/pio.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/pio.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_PIO_H -#define __ASM_ARCH_PIO_H - -#include <asm/arch/hardware.h> - -static inline void AT91_CfgPIO_USART0(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA17_TXD0 | AT91_PA18_RXD0 | AT91_PA20_CTS0); - - /* - * Errata #39 - RTS0 is not internally connected to PA21. We need to drive - * the pin manually. Default is off (RTS is active low). - */ - at91_sys_write(AT91_PIOA + PIO_PER, AT91_PA21_RTS0); - at91_sys_write(AT91_PIOA + PIO_OER, AT91_PA21_RTS0); - at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); -} - -static inline void AT91_CfgPIO_USART1(void) { - at91_sys_write(AT91_PIOB + PIO_PDR, AT91_PB18_RI1 | AT91_PB19_DTR1 - | AT91_PB20_TXD1 | AT91_PB21_RXD1 | AT91_PB23_DCD1 - | AT91_PB24_CTS1 | AT91_PB25_DSR1 | AT91_PB26_RTS1); -} - -static inline void AT91_CfgPIO_USART2(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA22_RXD2 | AT91_PA23_TXD2); -} - -static inline void AT91_CfgPIO_USART3(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_TXD3 | AT91_PA6_RXD3); - at91_sys_write(AT91_PIOA + PIO_BSR, AT91_PA5_TXD3 | AT91_PA6_RXD3); -} - -static inline void AT91_CfgPIO_DBGU(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA31_DTXD | AT91_PA30_DRXD); -} - -/* - * Enable the Two-Wire interface. - */ -static inline void AT91_CfgPIO_TWI(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA25_TWD | AT91_PA26_TWCK); - at91_sys_write(AT91_PIOA + PIO_ASR, AT91_PA25_TWD | AT91_PA26_TWCK); - at91_sys_write(AT91_PIOA + PIO_MDER, AT91_PA25_TWD | AT91_PA26_TWCK); /* open drain */ -} - -/* - * Enable the Serial Peripheral Interface. - */ -static inline void AT91_CfgPIO_SPI(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA0_MISO | AT91_PA1_MOSI | AT91_PA2_SPCK); -} - -static inline void AT91_CfgPIO_SPI_CS0(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA3_NPCS0); -} - -static inline void AT91_CfgPIO_SPI_CS1(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA4_NPCS1); -} - -static inline void AT91_CfgPIO_SPI_CS2(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_NPCS2); -} - -static inline void AT91_CfgPIO_SPI_CS3(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA6_NPCS3); -} - -/* - * Select the DataFlash card. - */ -static inline void AT91_CfgPIO_DataFlashCard(void) { - at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(7)); - at91_sys_write(AT91_PIOB + PIO_OER, AT91_PIO_P(7)); - at91_sys_write(AT91_PIOB + PIO_CODR, AT91_PIO_P(7)); -} - -/* - * Enable NAND Flash (SmartMedia) interface. - */ -static inline void AT91_CfgPIO_SmartMedia(void) { - /* enable PC0=SMCE, PC1=SMOE, PC3=SMWE, A21=CLE, A22=ALE */ - at91_sys_write(AT91_PIOC + PIO_ASR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); - at91_sys_write(AT91_PIOC + PIO_PDR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); - - /* Configure PC2 as input (signal READY of the SmartMedia) */ - at91_sys_write(AT91_PIOC + PIO_PER, AT91_PC2_BFAVD); /* enable direct output enable */ - at91_sys_write(AT91_PIOC + PIO_ODR, AT91_PC2_BFAVD); /* disable output */ - - /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(1)); /* enable direct output enable */ - at91_sys_write(AT91_PIOB + PIO_ODR, AT91_PIO_P(1)); /* disable output */ -} - -static inline int AT91_PIO_SmartMedia_RDY(void) { - return (at91_sys_read(AT91_PIOC + PIO_PDSR) & AT91_PIO_P(2)) ? 1 : 0; -} - -static inline int AT91_PIO_SmartMedia_CardDetect(void) { - return (at91_sys_read(AT91_PIOB + PIO_PDSR) & AT91_PIO_P(1)) ? 1 : 0; -} - -#endif diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h index 29c42655f05..8a2ff472e4c 100644 --- a/include/asm-arm/arch-at91rm9200/system.h +++ b/include/asm-arm/arch-at91rm9200/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> static inline void arch_idle(void) { @@ -48,4 +48,12 @@ static inline void arch_reset(char mode) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +#define ARCH_ID_AT91RM9200 0x09200080 +#define ARCH_ID_AT91SAM9261 0x019000a0 + +static inline unsigned long arch_identify(void) +{ + return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH); +} + #endif diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h index 3f112dd1258..88687cefe6e 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index 7b38497c24b..ec7811ab0a5 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> /* * The following code assumes the serial port has already been diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index 34d9718feb9..4c367eb57f4 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -21,6 +21,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (AT91_IO_VIRT_BASE & PGDIR_MASK) +#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK) #endif diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/include/asm-arm/arch-cl7500/acornfb.h index 3867231a447..aea6330c974 100644 --- a/include/asm-arm/arch-cl7500/acornfb.h +++ b/include/asm-arm/arch-cl7500/acornfb.h @@ -1,4 +1,3 @@ -#include <linux/config.h> #define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119) static inline void diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5..0fdbe72fff2 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -22,7 +22,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <linux/config.h> #define CLPS7111_VIRT_BASE 0xff000000 #define CLPS7111_BASE CLPS7111_VIRT_BASE diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h index 62613b0e2d9..53d790202c1 100644 --- a/include/asm-arm/arch-clps711x/io.h +++ b/include/asm-arm/arch-clps711x/io.h @@ -26,7 +26,6 @@ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) /* * We don't support ins[lb]/outs[lb]. Make them fault. diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h index 61d8717406c..c6e8dcf674d 100644 --- a/include/asm-arm/arch-clps711x/memory.h +++ b/include/asm-arm/arch-clps711x/memory.h @@ -20,7 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <linux/config.h> /* * Physical DRAM offset. diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 07157b7e4b2..03d233ae87c 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -17,7 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/config.h> #include <asm/arch/io.h> #include <asm/hardware.h> #include <asm/hardware/clps7111.h> diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h index ec51fe92483..daad8ee2d19 100644 --- a/include/asm-arm/arch-ebsa285/hardware.h +++ b/include/asm-arm/arch-ebsa285/hardware.h @@ -12,7 +12,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <linux/config.h> #include <asm/arch/memory.h> #ifdef CONFIG_ARCH_FOOTBRIDGE diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h index 776f9d37705..f9c72914186 100644 --- a/include/asm-arm/arch-ebsa285/io.h +++ b/include/asm-arm/arch-ebsa285/io.h @@ -24,7 +24,6 @@ #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #if 1 #define __mem_pci(a) (a) -#define __mem_isa(a) ((a) + PCIMEM_BASE) #else static inline void __iomem *___mem_pci(void __iomem *p) @@ -34,14 +33,7 @@ static inline void __iomem *___mem_pci(void __iomem *p) return p; } -static inline void __iomem *___mem_isa(void __iomem *p) -{ - unsigned long a = (unsigned long)p; - BUG_ON(a >= 16*1048576); - return p + PCIMEM_BASE; -} #define __mem_pci(a) ___mem_pci(a) -#define __mem_isa(a) ___mem_isa(a) #endif #endif diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h index 99181ffc7e2..cbd7ae64bcc 100644 --- a/include/asm-arm/arch-ebsa285/memory.h +++ b/include/asm-arm/arch-ebsa285/memory.h @@ -19,7 +19,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <linux/config.h> #if defined(CONFIG_FOOTBRIDGE_ADDIN) /* diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h index d1ca955ce43..02598200997 100644 --- a/include/asm-arm/arch-ebsa285/vmalloc.h +++ b/include/asm-arm/arch-ebsa285/vmalloc.h @@ -6,7 +6,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #ifdef CONFIG_ARCH_FOOTBRIDGE #define VMALLOC_END (PAGE_OFFSET + 0x30000000) diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h index 71cea0b5841..8c322975f96 100644 --- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h +++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h @@ -115,6 +115,8 @@ #define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) +#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) +#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) #define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h index df9cbb6ef66..d7a34ce2029 100644 --- a/include/asm-arm/arch-ep93xx/platform.h +++ b/include/asm-arm/arch-ep93xx/platform.h @@ -8,6 +8,7 @@ void ep93xx_map_io(void); void ep93xx_init_irq(void); void ep93xx_init_time(unsigned long); void ep93xx_init_devices(void); +void ep93xx_clock_init(void); extern struct sys_timer ep93xx_timer; diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h index 4a1bfd78a0f..53e923dba76 100644 --- a/include/asm-arm/arch-h720x/memory.h +++ b/include/asm-arm/arch-h720x/memory.h @@ -23,9 +23,7 @@ * There is something to do here later !, Mar 2000, Jungjun Kim */ -#define __virt_to_bus__is_a_macro #define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt__is_a_macro #define __bus_to_virt(x) __phys_to_virt(x) #endif diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h index f2063c1d610..599f03e5a9e 100644 --- a/include/asm-arm/arch-imx/imx-dma.h +++ b/include/asm-arm/arch-imx/imx-dma.h @@ -46,7 +46,7 @@ struct imx_dma_channel { const char *name; void (*irq_handler) (int, void *, struct pt_regs *); - void (*err_handler) (int, void *, struct pt_regs *); + void (*err_handler) (int, void *, struct pt_regs *, int errcode); void *data; dmamode_t dma_mode; struct scatterlist *sg; @@ -58,6 +58,10 @@ struct imx_dma_channel { extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; +#define IMX_DMA_ERR_BURST 1 +#define IMX_DMA_ERR_REQUEST 2 +#define IMX_DMA_ERR_TRANSFER 4 +#define IMX_DMA_ERR_BUFFER 8 /* The type to distinguish channel numbers parameter from ordinal int type */ typedef int imx_dmach_t; @@ -74,7 +78,7 @@ imx_dma_setup_sg(imx_dmach_t dma_ch, int imx_dma_setup_handlers(imx_dmach_t dma_ch, void (*irq_handler) (int, void *, struct pt_regs *), - void (*err_handler) (int, void *, struct pt_regs *), void *data); + void (*err_handler) (int, void *, struct pt_regs *, int), void *data); void imx_dma_enable(imx_dmach_t dma_ch); diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h index d09ae32cd2f..5ad90127915 100644 --- a/include/asm-arm/arch-imx/memory.h +++ b/include/asm-arm/arch-imx/memory.h @@ -30,9 +30,7 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus__is_a_macro -#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt__is_a_macro -#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) +#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) +#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) #endif diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h index 31f2deab51b..c8f2175948b 100644 --- a/include/asm-arm/arch-integrator/io.h +++ b/include/asm-arm/arch-integrator/io.h @@ -32,6 +32,5 @@ #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) #define __mem_pci(a) (a) -#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) #endif diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h index da6981efdc3..ab2c79bb950 100644 --- a/include/asm-arm/arch-integrator/smp.h +++ b/include/asm-arm/arch-integrator/smp.h @@ -1,7 +1,6 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H -#include <linux/config.h> #include <asm/hardware.h> #include <asm/io.h> diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h index f39046a6ab1..36adbdf5055 100644 --- a/include/asm-arm/arch-iop3xx/io.h +++ b/include/asm-arm/arch-iop3xx/io.h @@ -17,6 +17,5 @@ #define __io(p) ((void __iomem *)(p)) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h index bc62f4b1323..e43ebd98474 100644 --- a/include/asm-arm/arch-iop3xx/memory.h +++ b/include/asm-arm/arch-iop3xx/memory.h @@ -5,7 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <linux/config.h> #include <asm/hardware.h> /* diff --git a/include/asm-arm/arch-iop3xx/timex.h b/include/asm-arm/arch-iop3xx/timex.h index 472badb451c..14ca8d0f7b2 100644 --- a/include/asm-arm/arch-iop3xx/timex.h +++ b/include/asm-arm/arch-iop3xx/timex.h @@ -3,7 +3,6 @@ * * IOP3xx architecture timex specifications */ -#include <linux/config.h> #include <asm/hardware.h> #if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244) diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h index c98eb6254b1..fbdd5af644f 100644 --- a/include/asm-arm/arch-iop3xx/uncompress.h +++ b/include/asm-arm/arch-iop3xx/uncompress.h @@ -1,7 +1,6 @@ /* * linux/include/asm-arm/arch-iop3xx/uncompress.h */ -#include <linux/config.h> #include <asm/types.h> #include <asm/mach-types.h> #include <linux/serial_reg.h> diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S index 0ef4e6016ac..867761677b5 100644 --- a/include/asm-arm/arch-ixp23xx/entry-macro.S +++ b/include/asm-arm/arch-ixp23xx/entry-macro.S @@ -8,7 +8,7 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ suprious interrupt ? + cmp \irqnr, #0x0 @ spurious interrupt ? movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits subne \irqnr, \irqnr, #1 @ convert to 0 based diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h index e49e1ca61b1..3927b1d61b1 100644 --- a/include/asm-arm/arch-ixp23xx/ixp23xx.h +++ b/include/asm-arm/arch-ixp23xx/ixp23xx.h @@ -124,6 +124,7 @@ #define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) #define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) +#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) #define IXP23XX_EXP_BUS_PHYS 0x90000000 #define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 @@ -251,7 +252,7 @@ * CAP CSRs. ****************************************************************************/ #define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PROD_IDG IXP23XX_GLOBAL_REG(0x00) +#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) #define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) #define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) #define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) @@ -265,6 +266,8 @@ #define IXP23XX_PCI_UNIT_RESET (1 << 1) #define IXP23XX_XSCALE_RESET (1 << 0) +#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) + /**************************************************************************** * PCI CSRs. @@ -292,15 +295,4 @@ #define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) -#ifndef __ASSEMBLY__ -/* - * Is system memory on the XSI or CPP bus? - */ -static inline unsigned ixp23xx_cpp_boot(void) -{ - return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); -} -#endif - - #endif diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h index e4d99060a04..56e16d66645 100644 --- a/include/asm-arm/arch-ixp23xx/platform.h +++ b/include/asm-arm/arch-ixp23xx/platform.h @@ -14,6 +14,21 @@ #ifndef __ASSEMBLY__ +extern inline unsigned long ixp2000_reg_read(volatile void *reg) +{ + return *((volatile unsigned long *)reg); +} + +extern inline void ixp2000_reg_write(volatile void *reg, unsigned long val) +{ + *((volatile unsigned long *)reg) = val; +} + +extern inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) +{ + *((volatile unsigned long *)reg) = val; +} + struct pci_sys_data; void ixp23xx_map_io(void); @@ -28,5 +43,15 @@ extern struct sys_timer ixp23xx_timer; #define IXP23XX_UART_XTAL 14745600 +#ifndef __ASSEMBLY__ +/* + * Is system memory on the XSI or CPP bus? + */ +static inline unsigned ixp23xx_cpp_boot(void) +{ + return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); +} +#endif + #endif diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h index 013575e6a9a..16c1110f230 100644 --- a/include/asm-arm/arch-ixp23xx/uncompress.h +++ b/include/asm-arm/arch-ixp23xx/uncompress.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include <asm/hardware.h> +#include <asm/arch/ixp23xx.h> #include <linux/serial_reg.h> #define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h index b1a071ecebc..789f7f53c35 100644 --- a/include/asm-arm/arch-ixp4xx/dma.h +++ b/include/asm-arm/arch-ixp4xx/dma.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/config.h> #include <linux/device.h> #include <linux/pci.h> #include <asm/page.h> diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index cab8ad0adf0..cd080d8384d 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -19,7 +19,6 @@ */ #define __io_pci(a) ((void __iomem *)(PCIO_BASE + (a))) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #define __ioaddr(p) __io_pci(p) diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h new file mode 100644 index 00000000000..bee02fd8dab --- /dev/null +++ b/include/asm-arm/arch-lh7a40x/clocks.h @@ -0,0 +1,20 @@ +/* include/asm-arm/arch-lh7a40x/clocks.h + * + * Copyright (C) 2004 Marc Singer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +#include <linux/config.h> + +#ifndef __ASM_ARCH_CLOCKS_H +#define __ASM_ARCH_CLOCKS_H + +unsigned int fclkfreq_get (void); +unsigned int hclkfreq_get (void); +unsigned int pclkfreq_get (void); + +#endif /* _ASM_ARCH_CLOCKS_H */ diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h index 52c1cb9c39c..51de96e87fa 100644 --- a/include/asm-arm/arch-lh7a40x/constants.h +++ b/include/asm-arm/arch-lh7a40x/constants.h @@ -12,7 +12,6 @@ #ifndef __ASM_ARCH_CONSTANTS_H #define __ASM_ARCH_CONSTANTS_H -#include <linux/config.h> /* Addressing constants */ @@ -29,8 +28,7 @@ #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IOBARRIER_PHYS 0xc0000000 /* Start of SDRAM */ -/*# define IOBARRIER_PHYS 0x00000000 */ /* Start of flash */ +# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */ # define IOBARRIER_VIRT 0xf0000000 # define IOBARRIER_SIZE PAGE_SIZE @@ -53,6 +51,9 @@ # define CPLD08_PHYS CPLDX_PHYS (0x08) # define CPLD08_VIRT CPLDX_VIRT (0x08) # define CPLD08_SIZE PAGE_SIZE +# define CPLD0A_PHYS CPLDX_PHYS (0x0a) +# define CPLD0A_VIRT CPLDX_VIRT (0x0a) +# define CPLD0A_SIZE PAGE_SIZE # define CPLD0C_PHYS CPLDX_PHYS (0x0c) # define CPLD0C_VIRT CPLDX_VIRT (0x0c) # define CPLD0C_SIZE PAGE_SIZE @@ -84,5 +85,7 @@ #define XTAL_IN 14745600 /* 14.7456 MHz crystal */ #define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */ #define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */ +#define HCLK (99993600) +//#define HCLK (119808000) #endif /* __ASM_ARCH_CONSTANTS_H */ diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h index 15492e3253f..a8cbd14bbf9 100644 --- a/include/asm-arm/arch-lh7a40x/dma.h +++ b/include/asm-arm/arch-lh7a40x/dma.h @@ -1,9 +1,86 @@ /* include/asm-arm/arch-lh7a40x/dma.h * - * Copyright (C) 2003 Coastal Environmental Systems + * Copyright (C) 2005 Marc Singer * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * */ + +typedef enum { + DMA_M2M0 = 0, + DMA_M2M1 = 1, + DMA_M2P0 = 2, /* Tx */ + DMA_M2P1 = 3, /* Rx */ + DMA_M2P2 = 4, /* Tx */ + DMA_M2P3 = 5, /* Rx */ + DMA_M2P4 = 6, /* Tx - AC97 */ + DMA_M2P5 = 7, /* Rx - AC97 */ + DMA_M2P6 = 8, /* Tx */ + DMA_M2P7 = 9, /* Rx */ +} dma_device_t; + +#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */ + +#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80) +#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0) + +#define DMAC_GIR_MMI1 (1<<11) +#define DMAC_GIR_MMI0 (1<<10) +#define DMAC_GIR_MPI8 (1<<9) +#define DMAC_GIR_MPI9 (1<<8) +#define DMAC_GIR_MPI6 (1<<7) +#define DMAC_GIR_MPI7 (1<<6) +#define DMAC_GIR_MPI4 (1<<5) +#define DMAC_GIR_MPI5 (1<<4) +#define DMAC_GIR_MPI2 (1<<3) +#define DMAC_GIR_MPI3 (1<<2) +#define DMAC_GIR_MPI0 (1<<1) +#define DMAC_GIR_MPI1 (1<<0) + +#define DMAC_M2P0 0x0000 +#define DMAC_M2P1 0x0040 +#define DMAC_M2P2 0x0080 +#define DMAC_M2P3 0x00c0 +#define DMAC_M2P4 0x0240 +#define DMAC_M2P5 0x0200 +#define DMAC_M2P6 0x02c0 +#define DMAC_M2P7 0x0280 +#define DMAC_M2P8 0x0340 +#define DMAC_M2P9 0x0300 +#define DMAC_M2M0 0x0100 +#define DMAC_M2M1 0x0140 + +#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00) +#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04) +#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08) +#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c) +#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14) +#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20) +#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24) +#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28) +#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30) +#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34) +#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38) + +#define DMAC_PCONTROL_ENABLE (1<<4) + +#define DMAC_PORT_USB 0 +#define DMAC_PORT_SDMMC 1 +#define DMAC_PORT_AC97_1 2 +#define DMAC_PORT_AC97_2 3 +#define DMAC_PORT_AC97_3 4 +#define DMAC_PORT_UART1 6 +#define DMAC_PORT_UART2 7 +#define DMAC_PORT_UART3 8 + +#define DMAC_PSTATUS_CURRSTATE_SHIFT 4 +#define DMAC_PSTATUS_CURRSTATE_MASK 0x3 + +#define DMAC_PSTATUS_NEXTBUF (1<<6) +#define DMAC_PSTATUS_STALLRINT (1<<0) + +#define DMAC_INT_CHE (1<<3) +#define DMAC_INT_NFB (1<<1) +#define DMAC_INT_STALL (1<<0) diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S index a2f67c06d9c..9fc7f498812 100644 --- a/include/asm-arm/arch-lh7a40x/entry-macro.S +++ b/include/asm-arm/arch-lh7a40x/entry-macro.S @@ -10,11 +10,73 @@ #include <asm/hardware.h> #include <asm/arch/irqs.h> -# if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) -# error "LH7A400 and LH7A404 are mutually exclusive" -# endif +/* In order to allow there to be support for both of the processor + classes at the same time, we make a hack here that isn't very + pretty. At startup, the link pointed to with the + branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is + detected as a lh7a404. -# if defined (CONFIG_ARCH_LH7A400) + *** FIXME: we should clean this up so that there is only one + implementation for each CPU's design. + +*/ + +#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + +branch_irq_lh7a400: b 1000f + +@ Implementation of the LH7A404 get_irqnr_and_base. + + mov \irqnr, #0 @ VIC1 irq base + mov \base, #io_p2v(0x80000000) @ APB registers + add \base, \base, #0x8000 + ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR + tst \tmp, #VA_VECTORED @ Direct vectored + bne 1002f + tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 + ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS + bne 1001f + add \base, \base, #(0xa000 - 0x8000) + ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR + tst \tmp, #VA_VECTORED @ Direct vectored + bne 1002f + ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS + mov \irqnr, #32 @ VIC2 irq base + +1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry + bcs 1008f @ Bit set; irq found + add \irqnr, \irqnr, #1 + bne 1001b @ Until no bits + b 1009f @ Nothing? Hmm. +1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits +1008: movs \irqstat, #1 @ Force !Z + str \tmp, [\base, #0x0030] @ Clear vector + b 1009f + +@ Implementation of the LH7A400 get_irqnr_and_base. + +1000: mov \irqnr, #0 + mov \base, #io_p2v(0x80000000) @ APB registers + ldr \irqstat, [\base, #0x500] @ PIC INTSR + +1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry + bcs 1008f @ Bit set; irq found + add \irqnr, \irqnr, #1 + bne 1001b @ Until no bits + b 1009f @ Nothing? Hmm. +1008: movs \irqstat, #1 @ Force !Z + +1009: + .endm + + + +#elif defined (CONFIG_ARCH_LH7A400) .macro disable_fiq .endm diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h index aeb07c162e2..e9ff74fd793 100644 --- a/include/asm-arm/arch-lh7a40x/hardware.h +++ b/include/asm-arm/arch-lh7a40x/hardware.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H +#include <asm/sizes.h> /* Added for the sake of amba-clcd driver */ + #define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff)) #define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff)) @@ -53,6 +55,8 @@ typedef struct { volatile u8 offset[4096]; } __regbase8; #endif +#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s) + #include "registers.h" #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h index bbcd4335f44..17bc9409748 100644 --- a/include/asm-arm/arch-lh7a40x/io.h +++ b/include/asm-arm/arch-lh7a40x/io.h @@ -18,6 +18,5 @@ /* No ISA or PCI bus on this machine. */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif /* __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h index f91f3e59f3a..afe8c7cbad6 100644 --- a/include/asm-arm/arch-lh7a40x/irqs.h +++ b/include/asm-arm/arch-lh7a40x/irqs.h @@ -18,7 +18,6 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include <linux/config.h> #define FIQ_START 80 @@ -154,9 +153,10 @@ #if !defined (IRQ_GPIO0INTR) # define IRQ_GPIO0INTR IRQ_GPIO0FIQ #endif -#define IRQ_TICK IRQ_TINTR +#define IRQ_TICK IRQ_TINTR #define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */ #define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */ +#define IRQ_USB IRQ_USBINTR /* USB device */ #ifdef CONFIG_MACH_KEV7A400 # define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */ @@ -191,6 +191,10 @@ # define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */ #endif +#if defined (CONFIG_MACH_LPD7A400) +# define IRQ_TOUCH IRQ_LPD7A400_TS +#endif + #define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD) #endif diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h index 2edb22e3545..b4f09b3e2d0 100644 --- a/include/asm-arm/arch-lh7a40x/registers.h +++ b/include/asm-arm/arch-lh7a40x/registers.h @@ -9,7 +9,6 @@ * */ -#include <linux/config.h> #include <asm/arch/constants.h> #ifndef __ASM_ARCH_REGISTERS_H @@ -18,7 +17,7 @@ /* Physical register base addresses */ -#define AC97_PHYS (0x80000000) /* AC97 Controller */ +#define AC97C_PHYS (0x80000000) /* AC97 Controller */ #define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ #define USB_PHYS (0x80000200) /* USB Client */ #define SCI_PHYS (0x80000300) /* Secure Card Interface */ @@ -35,6 +34,8 @@ #define RTC_PHYS (0x80000d00) /* Real-time Clock */ #define GPIO_PHYS (0x80000e00) /* General Purpose IO */ #define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ +#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ +#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ #define WDT_PHYS (0x80001400) /* Watchdog Timer */ #define SMC_PHYS (0x80002000) /* Static Memory Controller */ #define SDRC_PHYS (0x80002400) /* SDRAM Controller */ @@ -43,6 +44,7 @@ /* Physical registers of the LH7A404 */ +#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ #define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ #define USBH_PHYS (0x80009000) /* USB OHCI host controller */ #define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ @@ -53,10 +55,32 @@ /* Clock/State Controller register */ +#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ #define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ +#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ +#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ #define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ - +#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) +#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) +#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) +#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) +#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) +#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) +#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) +#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) +#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) +#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) +#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) +#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) + +#define CSC_PWRSR_CHIPMAN_SHIFT (24) +#define CSC_PWRSR_CHIPMAN_MASK (0xff) +#define CSC_PWRSR_CHIPID_SHIFT (16) +#define CSC_PWRSR_CHIPID_MASK (0xff) + +#define CSC_USBDRESET_APBRESETREG (1<<1) +#define CSC_USBDRESET_IORESETREG (1<<0) /* Interrupt Controller registers */ @@ -109,6 +133,13 @@ #define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ #define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ #define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ +#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) +#define GPIO_PADD __REG(GPIO_PHYS + 0x10) +#define GPIO_PAD __REG(GPIO_PHYS + 0x00) +#define GPIO_PCD __REG(GPIO_PHYS + 0x08) +#define GPIO_PCDD __REG(GPIO_PHYS + 0x18) +#define GPIO_PEDD __REG(GPIO_PHYS + 0x24) +#define GPIO_PED __REG(GPIO_PHYS + 0x20) /* Static Memory Controller registers */ @@ -138,20 +169,21 @@ #endif #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define CPLD_CONTROL __REG8(CPLD02_PHYS) -# define CPLD_SPI_DATA __REG8(CPLD06_PHYS) -# define CPLD_SPI_CONTROL __REG8(CPLD08_PHYS) -# define CPLD_SPI_EEPROM __REG8(CPLD0A_PHYS) -# define CPLD_INTERRUPTS __REG8(CPLD0C_PHYS) /* IRQ mask/status */ -# define CPLD_BOOT_MODE __REG8(CPLD0E_PHYS) -# define CPLD_FLASH __REG8(CPLD10_PHYS) -# define CPLD_POWER_MGMT __REG8(CPLD12_PHYS) -# define CPLD_REVISION __REG8(CPLD14_PHYS) -# define CPLD_GPIO_EXT __REG8(CPLD16_PHYS) -# define CPLD_GPIO_DATA __REG8(CPLD18_PHYS) -# define CPLD_GPIO_DIR __REG8(CPLD1A_PHYS) -#endif +# define CPLD_CONTROL __REG16(CPLD02_PHYS) +# define CPLD_SPI_DATA __REG16(CPLD06_PHYS) +# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) +# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) +# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ +# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) +# define CPLD_FLASH __REG16(CPLD10_PHYS) +# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) +# define CPLD_REVISION __REG16(CPLD14_PHYS) +# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) +# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) +# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) + +#endif /* Timer registers */ @@ -190,4 +222,3 @@ #endif /* _ASM_ARCH_REGISTERS_H */ - diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/include/asm-arm/arch-lh7a40x/ssp.h new file mode 100644 index 00000000000..132b1c4d5ce --- /dev/null +++ b/include/asm-arm/arch-lh7a40x/ssp.h @@ -0,0 +1,71 @@ +/* ssp.h + $Id$ + + written by Marc Singer + 6 Dec 2004 + + Copyright (C) 2004 Marc Singer + + ----------- + DESCRIPTION + ----------- + + This SSP header is available throughout the kernel, for this + machine/architecture, because drivers that use it may be dispersed. + + This file was cloned from the 7952x implementation. It would be + better to share them, but we're taking an easier approach for the + time being. + +*/ + +#if !defined (__SSP_H__) +# define __SSP_H__ + +/* ----- Includes */ + +/* ----- Types */ + +struct ssp_driver { + int (*init) (void); + void (*exit) (void); + void (*acquire) (void); + void (*release) (void); + int (*configure) (int device, int mode, int speed, + int frame_size_write, int frame_size_read); + void (*chip_select) (int enable); + void (*set_callbacks) (void* handle, + irqreturn_t (*callback_tx)(void*), + irqreturn_t (*callback_rx)(void*)); + void (*enable) (void); + void (*disable) (void); +// int (*save_state) (void*); +// void (*restore_state) (void*); + int (*read) (void); + int (*write) (u16 data); + int (*write_read) (u16 data); + void (*flush) (void); + void (*write_async) (void* pv, size_t cb); + size_t (*write_pos) (void); +}; + + /* These modes are only available on the LH79524 */ +#define SSP_MODE_SPI (1) +#define SSP_MODE_SSI (2) +#define SSP_MODE_MICROWIRE (3) +#define SSP_MODE_I2S (4) + + /* CPLD SPI devices */ +#define DEVICE_EEPROM 0 /* Configuration eeprom */ +#define DEVICE_MAC 1 /* MAC eeprom (LPD79524) */ +#define DEVICE_CODEC 2 /* Audio codec */ +#define DEVICE_TOUCH 3 /* Touch screen (LPD79520) */ + +/* ----- Globals */ + +/* ----- Prototypes */ + +//extern struct ssp_driver lh79520_i2s_driver; +extern struct ssp_driver lh7a400_cpld_ssp_driver; + +#endif /* __SSP_H__ */ diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h index f8053346f60..3d1ce0426a3 100644 --- a/include/asm-arm/arch-lh7a40x/uncompress.h +++ b/include/asm-arm/arch-lh7a40x/uncompress.h @@ -16,7 +16,7 @@ #ifndef UART_R_STATUS # define UART_R_STATUS (0x10) #endif -#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */ +#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */ /* Access UART with physical addresses before MMU is setup */ #define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S new file mode 100644 index 00000000000..a940d0e80cb --- /dev/null +++ b/include/asm-arm/arch-netx/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-netx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include "hardware.h" + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x00100000 @ physical + movne \rx, #io_p2v(0x00100000) @ virtual + orr \rx, \rx, #0x00000a00 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1002b + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1001b + .endm diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h new file mode 100644 index 00000000000..4eda5feed81 --- /dev/null +++ b/include/asm-arm/arch-netx/dma.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-netx/dma.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MAX_DMA_CHANNELS 0 +#define MAX_DMA_ADDRESS ~0 diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S new file mode 100644 index 00000000000..658df4d60ff --- /dev/null +++ b/include/asm-arm/arch-netx/entry-macro.S @@ -0,0 +1,35 @@ +/* + * include/asm-arm/arch-netx/entry-macro.S + * + * Low-level IRQ helper macros for Hilscher netX based platforms + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <asm/hardware.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov \base, #io_p2v(0x00100000) + add \base, \base, #0x000ff000 + + ldr \irqstat, [\base, #0] + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 + cmp \irqstat, #0 + .endm + diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h new file mode 100644 index 00000000000..643c90ef8b7 --- /dev/null +++ b/include/asm-arm/arch-netx/eth.h @@ -0,0 +1,27 @@ +/* + * include/asm-arm/arch-netx/eth.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASMARM_ARCH_ETH_H +#define ASMARM_ARCH_ETH_H + +struct netxeth_platform_data { + unsigned int xcno; /* number of xmac/xpec engine this eth uses */ +}; + +#endif diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h new file mode 100644 index 00000000000..7786c45455c --- /dev/null +++ b/include/asm-arm/arch-netx/hardware.h @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-netx/hardware.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#define NETX_IO_PHYS 0x00100000 +#define NETX_IO_VIRT 0xe0000000 +#define NETX_IO_SIZE 0x00100000 + +#define SRAM_INTERNAL_PHYS_0 0x00000 +#define SRAM_INTERNAL_PHYS_1 0x08000 +#define SRAM_INTERNAL_PHYS_2 0x10000 +#define SRAM_INTERNAL_PHYS_3 0x18000 +#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) + +#define XPEC_MEM_SIZE 0x4000 +#define XMAC_MEM_SIZE 0x1000 +#define SRAM_MEM_SIZE 0x8000 + +#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) +#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) + +#endif diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h new file mode 100644 index 00000000000..a7a53f80165 --- /dev/null +++ b/include/asm-arm/arch-netx/io.h @@ -0,0 +1,28 @@ +/* + * linux/include/asm-arm/arch-netx/io.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h new file mode 100644 index 00000000000..a487dc6e266 --- /dev/null +++ b/include/asm-arm/arch-netx/irqs.h @@ -0,0 +1,70 @@ +/* + * include/asm-arm/arch-netx/irqs.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define NETX_IRQ_VIC_START 0 +#define NETX_IRQ_SOFTINT 0 +#define NETX_IRQ_TIMER0 1 +#define NETX_IRQ_TIMER1 2 +#define NETX_IRQ_TIMER2 3 +#define NETX_IRQ_SYSTIME_NS 4 +#define NETX_IRQ_SYSTIME_S 5 +#define NETX_IRQ_GPIO_15 6 +#define NETX_IRQ_WATCHDOG 7 +#define NETX_IRQ_UART0 8 +#define NETX_IRQ_UART1 9 +#define NETX_IRQ_UART2 10 +#define NETX_IRQ_USB 11 +#define NETX_IRQ_SPI 12 +#define NETX_IRQ_I2C 13 +#define NETX_IRQ_LCD 14 +#define NETX_IRQ_HIF 15 +#define NETX_IRQ_GPIO_0_14 16 +#define NETX_IRQ_XPEC0 17 +#define NETX_IRQ_XPEC1 18 +#define NETX_IRQ_XPEC2 19 +#define NETX_IRQ_XPEC3 20 +#define NETX_IRQ_XPEC(no) (17 + (no)) +#define NETX_IRQ_MSYNC0 21 +#define NETX_IRQ_MSYNC1 22 +#define NETX_IRQ_MSYNC2 23 +#define NETX_IRQ_MSYNC3 24 +#define NETX_IRQ_IRQ_PHY 25 +#define NETX_IRQ_ISO_AREA 26 +/* int 27 is reserved */ +/* int 28 is reserved */ +#define NETX_IRQ_TIMER3 29 +#define NETX_IRQ_TIMER4 30 +/* int 31 is reserved */ + +#define NETX_IRQS 32 + +/* for multiplexed irqs on gpio 0..14 */ +#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) +#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) + +/* Host interface interrupts */ +#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) +#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) +#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) +#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) +#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) +#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) +#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) + +#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h new file mode 100644 index 00000000000..6d8d2df3e99 --- /dev/null +++ b/include/asm-arm/arch-netx/memory.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-netx/memory.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x80000000) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif + diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h new file mode 100644 index 00000000000..8ab45bea83c --- /dev/null +++ b/include/asm-arm/arch-netx/netx-regs.h @@ -0,0 +1,410 @@ +/* + * include/asm-arm/arch-netx/netx-regs.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_NETX_REGS_H +#define __ASM_ARCH_NETX_REGS_H + +/* offsets relative to the beginning of the io space */ +#define NETX_OFS_SYSTEM 0x00000 +#define NETX_OFS_MEMCR 0x00100 +#define NETX_OFS_DPMAS 0x03000 +#define NETX_OFS_GPIO 0x00800 +#define NETX_OFS_PIO 0x00900 +#define NETX_OFS_UART0 0x00a00 +#define NETX_OFS_UART1 0x00a40 +#define NETX_OFS_UART2 0x00a80 +#define NETX_OF_MIIMU 0x00b00 +#define NETX_OFS_SPI 0x00c00 +#define NETX_OFS_I2C 0x00d00 +#define NETX_OFS_SYSTIME 0x01100 +#define NETX_OFS_RTC 0x01200 +#define NETX_OFS_EXTBUS 0x03600 +#define NETX_OFS_LCD 0x04000 +#define NETX_OFS_USB 0x20000 +#define NETX_OFS_XMAC0 0x60000 +#define NETX_OFS_XMAC1 0x61000 +#define NETX_OFS_XMAC2 0x62000 +#define NETX_OFS_XMAC3 0x63000 +#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000) +#define NETX_OFS_PFIFO 0x64000 +#define NETX_OFS_XPEC0 0x70000 +#define NETX_OFS_XPEC1 0x74000 +#define NETX_OFS_XPEC2 0x78000 +#define NETX_OFS_XPEC3 0x7c000 +#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000) +#define NETX_OFS_VIC 0xff000 + +/* physical addresses */ +#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM) +#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR) +#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS) +#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO) +#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO) +#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0) +#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1) +#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2) +#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU) +#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI) +#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C) +#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME) +#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC) +#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS) +#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD) +#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB) +#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0) +#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1) +#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2) +#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3) +#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no)) +#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO) +#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0) +#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1) +#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2) +#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3) +#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no)) +#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC) + +/* virual addresses */ +#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM) +#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR) +#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS) +#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO) +#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO) +#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0) +#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1) +#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2) +#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU) +#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI) +#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C) +#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME) +#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC) +#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS) +#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD) +#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB) +#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0) +#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1) +#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2) +#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3) +#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no)) +#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO) +#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0) +#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1) +#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2) +#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3) +#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no)) +#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC) + +/********************************* + * System functions * + *********************************/ + +/* Registers */ +#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs)) +#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) +#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) +#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) + +/* FIXME: Docs are not consistent */ +#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) +/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) */ + +#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) +#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) +#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70) +#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200) +#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204) +#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208) +#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c) + +/* Bits */ +#define NETX_SYSTEM_RES_CR_RSTIN (1<<0) +#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1) +#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2) +#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3) +#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4) +#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5) +#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6) +#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7) +#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16) +#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17) +#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18) +#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23) +#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24) +#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25) +#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26) + +#define PHY_CONTROL_RESET (1<<31) +#define PHY_CONTROL_SIM_BYP (1<<30) +#define PHY_CONTROL_CLK_XLATIN (1<<29) +#define PHY_CONTROL_PHY1_EN (1<<21) +#define PHY_CONTROL_PHY1_NP_MSG_CODE +#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17) +#define PHY_CONTROL_PHY1_FIXMODE (1<<16) +#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13) +#define PHY_CONTROL_PHY0_EN (1<<12) +#define PHY_CONTROL_PHY0_NP_MSG_CODE +#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8) +#define PHY_CONTROL_PHY0_FIXMODE (1<<7) +#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4) +#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf) + +#define PHY_MODE_10BASE_T_HALF 0 +#define PHY_MODE_10BASE_T_FULL 1 +#define PHY_MODE_100BASE_TX_FX_FULL 2 +#define PHY_MODE_100BASE_TX_FX_HALF 3 +#define PHY_MODE_100BASE_TX_HALF 4 +#define PHY_MODE_REPEATER 5 +#define PHY_MODE_POWER_DOWN 6 +#define PHY_MODE_ALL 7 + +/* Bits */ +#define VECT_CNTL_ENABLE (1 << 5) + +/******************************* + * GPIO and timer module * + *******************************/ + +/* Registers */ +#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs)) +#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) +#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) +#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) +#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2)) +#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2)) +#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc) +#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0) +#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4) +#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8) +#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0) + +/* Bits */ +#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0) +#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1) +#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2) +#define NETX_GPIO_CFG_INV (1<<2) +#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5) +#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5) + +#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0) +#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1) +#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2) +#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3) +#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4) +#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5) +#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6) +#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */ + +#define GPIO_BIT(gpio) (1<<(gpio)) +#define COUNTER_BIT(counter) ((1<<16)<<(counter)) + +/******************************* + * PIO * + *******************************/ + +/* Registers */ +#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs)) +#define NETX_PIO_INPIO NETX_PIO_REG(0x0) +#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) +#define NETX_PIO_OEPIO NETX_PIO_REG(0x8) + +/******************************* + * MII Unit * + *******************************/ + +/* Registers */ +#define NETX_MIIMU __io(NETX_VA_MIIMU) + +/* Bits */ +#define MIIMU_SNRDY (1<<0) +#define MIIMU_PREAMBLE (1<<1) +#define MIIMU_OPMODE_WRITE (1<<2) +#define MIIMU_MDC_PERIOD (1<<3) +#define MIIMU_PHY_NRES (1<<4) +#define MIIMU_RTA (1<<5) +#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6) +#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11) +#define MIIMU_DATA(data) (((data) & 0xffff) << 16) + +/******************************* + * xmac / xpec * + *******************************/ + +/* XPEC register offsets relative to NETX_VA_XPEC(no) */ +#define NETX_XPEC_R0_OFS 0x00 +#define NETX_XPEC_R1_OFS 0x04 +#define NETX_XPEC_R2_OFS 0x08 +#define NETX_XPEC_R3_OFS 0x0c +#define NETX_XPEC_R4_OFS 0x10 +#define NETX_XPEC_R5_OFS 0x14 +#define NETX_XPEC_R6_OFS 0x18 +#define NETX_XPEC_R7_OFS 0x1c +#define NETX_XPEC_RANGE01_OFS 0x20 +#define NETX_XPEC_RANGE23_OFS 0x24 +#define NETX_XPEC_RANGE45_OFS 0x28 +#define NETX_XPEC_RANGE67_OFS 0x2c +#define NETX_XPEC_PC_OFS 0x48 +#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2)) +#define NETX_XPEC_IRQ_OFS 0x8c +#define NETX_XPEC_SYSTIME_NS_OFS 0x90 +#define NETX_XPEC_FIFO_DATA_OFS 0x94 +#define NETX_XPEC_SYSTIME_S_OFS 0x98 +#define NETX_XPEC_ADC_OFS 0x9c +#define NETX_XPEC_URX_COUNT_OFS 0x40 +#define NETX_XPEC_UTX_COUNT_OFS 0x44 +#define NETX_XPEC_PC_OFS 0x48 +#define NETX_XPEC_ZERO_OFS 0x4c +#define NETX_XPEC_STATCFG_OFS 0x50 +#define NETX_XPEC_EC_MASKA_OFS 0x54 +#define NETX_XPEC_EC_MASKB_OFS 0x58 +#define NETX_XPEC_EC_MASK0_OFS 0x5c +#define NETX_XPEC_EC_MASK8_OFS 0x7c +#define NETX_XPEC_EC_MASK9_OFS 0x80 +#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100 +#define NETX_XPEC_RAM_START_OFS 0x2000 + +/* Bits */ +#define XPU_HOLD_PC (1<<0) + +/* XMAC register offsets relative to NETX_VA_XMAC(no) */ +#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000 +#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff +#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400 +#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff +#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00 +#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04 +#define NETX_XMAC_STATUS_SHARED0_OFS 0x840 +#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844 +#define NETX_XMAC_STATUS_SHARED1_OFS 0x848 +#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c +#define NETX_XMAC_STATUS_SHARED2_OFS 0x850 +#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854 +#define NETX_XMAC_STATUS_SHARED3_OFS 0x858 +#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c + +#define RPU_HOLD_PC (1<<15) +#define TPU_HOLD_PC (1<<15) + +/******************************* + * Pointer FIFO * + *******************************/ + +/* Registers */ +#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs)) +#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) +#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) +#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) +#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104) +#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108) +#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c) +#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110) +#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2)) +#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2)) + +/******************************* + * Dual Port Memory * + *******************************/ + +/* Registers */ +#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs)) +#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) +#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) +#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) +#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608) +#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c) +#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs)) +#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */ +#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624) +#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628) +#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */ +#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634) +#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638) + +/* Bits */ +#define NETX_DPMAS_INT_EN_GLB_EN (1<<31) +#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30) +#define NETX_DPMAS_INT_EN_WDG (1<<29) +#define NETX_DPMAS_INT_EN_PIO72 (1<<28) +#define NETX_DPMAS_INT_EN_PIO47 (1<<27) +#define NETX_DPMAS_INT_EN_PIO40 (1<<26) +#define NETX_DPMAS_INT_EN_PIO36 (1<<25) +#define NETX_DPMAS_INT_EN_PIO35 (1<<24) + +#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28) +#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28) +#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28) +#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28) +#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14) + +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30) + +#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29) +#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26) +#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23) +#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20) +#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17) +#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12) +#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7) +#define NETX_EXT_CONFIG_WAIT_POL (1<<6) +#define NETX_EXT_CONFIG_WAIT_EN (1<<5) +#define NETX_EXT_CONFIG_NRD_MODE (1<<4) +#define NETX_EXT_CONFIG_DS_MODE (1<<3) +#define NETX_EXT_CONFIG_NWR_MODE (1<<2) +#define NETX_EXT_CONFIG_16BIT (1<<1) +#define NETX_EXT_CONFIG_CS_ENABLE (1<<0) + +#define NETX_DPMAS_IO_MODE0_WRL (1<<13) +#define NETX_DPMAS_IO_MODE0_WAIT (1<<14) +#define NETX_DPMAS_IO_MODE0_READY (1<<15) +#define NETX_DPMAS_IO_MODE0_CS0 (1<<19) +#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20) + +#define NETX_DPMAS_IO_MODE1_CS2 (1<<15) +#define NETX_DPMAS_IO_MODE1_CS1 (1<<16) +#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30) + +/******************************* + * I2C * + *******************************/ +#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs)) +#define NETX_I2C_CTRL NETX_I2C_REG(0x0) +#define NETX_I2C_DATA NETX_I2C_REG(0x4) + +#endif /* __ASM_ARCH_NETX_REGS_H */ diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h new file mode 100644 index 00000000000..7a80c26178a --- /dev/null +++ b/include/asm-arm/arch-netx/param.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/arch-netx/param.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h new file mode 100644 index 00000000000..4af2ee4a32c --- /dev/null +++ b/include/asm-arm/arch-netx/pfifo.h @@ -0,0 +1,54 @@ +/* + * include/asm-arm/arch-netx/pfifo.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef ASM_ARCH_PFIFO_H +#define ASM_ARCH_PFIFO_H + +static inline int pfifo_push(int no, unsigned int pointer) +{ + writel(pointer, NETX_PFIFO_BASE(no)); + return 0; +} + +static inline unsigned int pfifo_pop(int no) +{ + return readl(NETX_PFIFO_BASE(no)); +} + +static inline int pfifo_fill_level(int no) +{ + + return readl(NETX_PFIFO_FILL_LEVEL(no)); +} + +static inline int pfifo_full(int no) +{ + return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0; +} + +static inline int pfifo_empty(int no) +{ + return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0; +} + +int pfifo_request(unsigned int pfifo_mask); +void pfifo_free(unsigned int pfifo_mask); + +#endif /* ASM_ARCH_PFIFO_H */ diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h new file mode 100644 index 00000000000..52adf368d76 --- /dev/null +++ b/include/asm-arm/arch-netx/system.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-netx/system.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/io.h> +#include <asm/hardware.h> +#include "netx-regs.h" + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, + NETX_SYSTEM_RES_CR); +} + +#endif + diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h new file mode 100644 index 00000000000..7fdb42da0b4 --- /dev/null +++ b/include/asm-arm/arch-netx/timex.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-netx/timex.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE 100000000 diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h new file mode 100644 index 00000000000..f8943454710 --- /dev/null +++ b/include/asm-arm/arch-netx/uncompress.h @@ -0,0 +1,76 @@ +/* + * include/asm-arm/arch-netx/uncompress.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ + +#define REG(x) (*(volatile unsigned long *)(x)) + +#define UART1_BASE 0x100a00 +#define UART2_BASE 0x100a80 + +#define UART_DR 0x0 + +#define UART_CR 0x14 +#define CR_UART_EN (1<<0) + +#define UART_FR 0x18 +#define FR_BUSY (1<<3) +#define FR_TXFF (1<<5) + +static void putc(char c) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_TXFF); + REG(base + UART_DR) = c; +} + +static inline void flush(void) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_BUSY); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h new file mode 100644 index 00000000000..da2da5a595d --- /dev/null +++ b/include/asm-arm/arch-netx/vmalloc.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-netx/vmalloc.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h new file mode 100644 index 00000000000..659af19512a --- /dev/null +++ b/include/asm-arm/arch-netx/xc.h @@ -0,0 +1,42 @@ +/* + * linux/include/asm-arm/arch-netx/xc.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_XC_H +#define __ASM_ARCH_XC_H + +struct xc { + int no; + unsigned int type; + unsigned int version; + void __iomem *xpec_base; + void __iomem *xmac_base; + void __iomem *sram_base; + int irq; + struct device *dev; +}; + +int xc_reset(struct xc *x); +int xc_stop(struct xc* x); +int xc_start(struct xc *x); +int xc_running(struct xc *x); +int xc_request_firmware(struct xc* x); +struct xc* request_xc(int xcno, struct device *dev); +void free_xc(struct xc *x); + +#endif /* __ASM_ARCH_XC_H */ diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index 6d6240a4681..dfdbf06fd64 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -10,7 +10,6 @@ #ifndef _OMAP_BOARD_H #define _OMAP_BOARD_H -#include <linux/config.h> #include <linux/types.h> /* Different peripheral ids */ diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 7909b729826..c7d9e857795 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -37,7 +37,6 @@ #define __ASM_ARCH_OMAP_HARDWARE_H #include <asm/sizes.h> -#include <linux/config.h> #ifndef __ASSEMBLER__ #include <asm/types.h> #include <asm/arch/cpu.h> diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index b726acfcab1..78f68e6a4f0 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -44,7 +44,6 @@ */ #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) /* * ---------------------------------------------------------------------------- diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index 67970d1a202..ac2bfa433f0 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -4,7 +4,6 @@ */ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/config.h> #include <linux/clk.h> #include <asm/mach-types.h> diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h index ca2c8bec82e..aca0adfef1b 100644 --- a/include/asm-arm/arch-omap/uncompress.h +++ b/include/asm-arm/arch-omap/uncompress.h @@ -17,7 +17,6 @@ * kind, whether express or implied. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/serial_reg.h> #include <asm/arch/serial.h> diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h new file mode 100644 index 00000000000..91ae0030fdf --- /dev/null +++ b/include/asm-arm/arch-pnx4008/clock.h @@ -0,0 +1,61 @@ +/* + * include/asm-arm/arch-pnx4008/clock.h + * + * Clock control driver for PNX4008 - header file + * + * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PNX4008_CLOCK_H__ +#define __PNX4008_CLOCK_H__ + +struct module; +struct clk; + +#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) +#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) +#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) +#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) +#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) +#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) +#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) +#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) +#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) +#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) +#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) +#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) +#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) +#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) +#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) +#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) +#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) +#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) +#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) +#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) +#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) +#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) +#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) + +#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) +#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) +#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) +#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) +#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) + +#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) + +#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) + +#define CLK_RATE_13MHZ 13000 +#define CLK_RATE_1MHZ 1000 +#define CLK_RATE_208MHZ 208000 +#define CLK_RATE_48MHZ 48000 +#define CLK_RATE_32KHZ 32 + +#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ + +#endif diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S new file mode 100644 index 00000000000..67d18a203d2 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/debug-macro.S @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-pnx4008/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + mov \rx, #0x00090000 + addeq \rx, \rx, #0x40000000 + addne \rx, \rx, #0xf4000000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h new file mode 100644 index 00000000000..3aee1204795 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/dma.h @@ -0,0 +1,162 @@ +/* + * linux/include/asm-arm/arch-pnx4008/dma.h + * + * PNX4008 DMA header file + * + * Author: Vitaly Wool + * Copyright: MontaVista Software Inc. (c) 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include "platform.h" + +#define MAX_DMA_ADDRESS 0xffffffff + +#define MAX_DMA_CHANNELS 8 + +#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) +#define DMAC_INT_STAT (DMAC_BASE + 0x0000) +#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) +#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) +#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) +#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) +#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) +#define DMAC_CONFIG (DMAC_BASE + 0x0030) +#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) +#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) +#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) +#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) +#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) + +enum { + WIDTH_BYTE = 0, + WIDTH_HWORD, + WIDTH_WORD +}; + +enum { + FC_MEM2MEM_DMA, + FC_MEM2PER_DMA, + FC_PER2MEM_DMA, + FC_PER2PER_DMA, + FC_PER2PER_DPER, + FC_MEM2PER_PER, + FC_PER2MEM_PER, + FC_PER2PER_SPER +}; + +enum { + DMA_INT_UNKNOWN = 0, + DMA_ERR_INT = 1, + DMA_TC_INT = 2, +}; + +enum { + DMA_BUFFER_ALLOCATED = 1, + DMA_HAS_LL = 2, +}; + +enum { + PER_CAM_DMA_1 = 0, + PER_NDF_FLASH = 1, + PER_MBX_SLAVE_FIFO = 2, + PER_SPI2_REC_XMIT = 3, + PER_MS_SD_RX_XMIT = 4, + PER_HS_UART_1_XMIT = 5, + PER_HS_UART_1_RX = 6, + PER_HS_UART_2_XMIT = 7, + PER_HS_UART_2_RX = 8, + PER_HS_UART_7_XMIT = 9, + PER_HS_UART_7_RX = 10, + PER_SPI1_REC_XMIT = 11, + PER_MLC_NDF_SREC = 12, + PER_CAM_DMA_2 = 13, + PER_PRNG_INFIFO = 14, + PER_PRNG_OUTFIFO = 15, +}; + +struct pnx4008_dma_ch_ctrl { + int tc_mask; + int cacheable; + int bufferable; + int priv_mode; + int di; + int si; + int dest_ahb1; + int src_ahb1; + int dwidth; + int swidth; + int dbsize; + int sbsize; + int tr_size; +}; + +struct pnx4008_dma_ch_config { + int halt; + int active; + int lock; + int itc; + int ie; + int flow_cntrl; + int dest_per; + int src_per; +}; + +struct pnx4008_dma_ll { + unsigned long src_addr; + unsigned long dest_addr; + u32 next_dma; + unsigned long ch_ctrl; + struct pnx4008_dma_ll *next; + int flags; + void *alloc_data; + int (*free) (void *); +}; + +struct pnx4008_dma_config { + int is_ll; + unsigned long src_addr; + unsigned long dest_addr; + unsigned long ch_ctrl; + unsigned long ch_cfg; + struct pnx4008_dma_ll *ll; + u32 ll_dma; + int flags; + void *alloc_data; + int (*free) (void *); +}; + +extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); +extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); +extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); + +extern int pnx4008_request_channel(char *, int, + void (*)(int, int, void *, struct pt_regs *), + void *); +extern void pnx4008_free_channel(int); +extern int pnx4008_config_dma(int, int, int); +extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, + unsigned long *); +extern int pnx4008_dma_parse_control(unsigned long, + struct pnx4008_dma_ch_ctrl *); +extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, + unsigned long *); +extern int pnx4008_dma_parse_config(unsigned long, + struct pnx4008_dma_ch_config *); +extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); +extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); +extern int pnx4008_dma_ch_enable(int); +extern int pnx4008_dma_ch_disable(int); +extern int pnx4008_dma_ch_enabled(int); +extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, + struct pnx4008_dma_ch_ctrl *); +extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, + struct pnx4008_dma_ch_ctrl *); + +#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S new file mode 100644 index 00000000000..c1c198e3680 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/entry-macro.S @@ -0,0 +1,121 @@ +/* + * include/asm-arm/arch-pnx4008/entry-macro.S + * + * Low-level IRQ helper macros for PNX4008-based platforms + * + * 2005-2006 (c) MontaVista Software, Inc. + * Author: Vitaly Wool <vwool@ru.mvista.com> + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "platform.h" + +#define IO_BASE 0xF0000000 +#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) + +#define INTRC_MASK 0x00 +#define INTRC_RAW_STAT 0x04 +#define INTRC_STAT 0x08 +#define INTRC_POLAR 0x0C +#define INTRC_ACT_TYPE 0x10 +#define INTRC_TYPE 0x14 + +#define SIC1_BASE_INT 32 +#define SIC2_BASE_INT 64 + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +/* decode the MIC interrupt numbers */ + ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) + ldr \irqstat, [\base, #INTRC_STAT] + + cmp \irqstat,#1<<16 + movhs \irqnr,#16 + movlo \irqnr,#0 + movhs \irqstat,\irqstat,lsr#16 + cmp \irqstat,#1<<8 + addhs \irqnr,\irqnr,#8 + movhs \irqstat,\irqstat,lsr#8 + cmp \irqstat,#1<<4 + addhs \irqnr,\irqnr,#4 + movhs \irqstat,\irqstat,lsr#4 + cmp \irqstat,#1<<2 + addhs \irqnr,\irqnr,#2 + movhs \irqstat,\irqstat,lsr#2 + cmp \irqstat,#1<<1 + addhs \irqnr,\irqnr,#1 + +/* was there an interrupt ? if not then drop out with EQ status */ + teq \irqstat,#0 + beq 1003f + +/* and now check for extended IRQ reasons */ + cmp \irqnr,#1 + bls 1003f + cmp \irqnr,#30 + blo 1002f + +/* IRQ 31,30 : High priority cascade IRQ handle */ +/* read the correct SIC */ +/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ +/* set the base IRQ number */ + ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) + moveq \irqnr,#SIC1_BASE_INT + ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) + movne \irqnr,#SIC2_BASE_INT + ldr \irqstat, [\base, #INTRC_STAT] + ldr \tmp, [\base, #INTRC_TYPE] +/* and with inverted mask : low priority interrupts */ + and \irqstat,\irqstat,\tmp + b 1004f + +1003: +/* IRQ 1,0 : Low priority cascade IRQ handle */ +/* read the correct SIC */ +/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ +/* read the correct SIC */ +/* set the base IRQ number */ + ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) + movne \irqnr,#SIC1_BASE_INT + ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) + moveq \irqnr,#SIC2_BASE_INT + ldr \irqstat, [\base, #INTRC_STAT] + ldr \tmp, [\base, #INTRC_TYPE] +/* and with inverted mask : low priority interrupts */ + bic \irqstat,\irqstat,\tmp + +1004: + + cmp \irqstat,#1<<16 + addhs \irqnr,\irqnr,#16 + movhs \irqstat,\irqstat,lsr#16 + cmp \irqstat,#1<<8 + addhs \irqnr,\irqnr,#8 + movhs \irqstat,\irqstat,lsr#8 + cmp \irqstat,#1<<4 + addhs \irqnr,\irqnr,#4 + movhs \irqstat,\irqstat,lsr#4 + cmp \irqstat,#1<<2 + addhs \irqnr,\irqnr,#2 + movhs \irqstat,\irqstat,lsr#2 + cmp \irqstat,#1<<1 + addhs \irqnr,\irqnr,#1 + + +/* is irqstat not zero */ + +1002: +/* we assert that irqstat is not equal to zero and return ne status if true*/ + teq \irqstat,#0 +1003: + .endm + + + .macro irq_prio_table + .endm + + diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h new file mode 100644 index 00000000000..d01bf83d55c --- /dev/null +++ b/include/asm-arm/arch-pnx4008/gpio.h @@ -0,0 +1,241 @@ +/* + * include/asm-arm/arch-pnx4008/gpio.h + * + * PNX4008 GPIO driver - header file + * + * Author: Dmitry Chigirev <source@mvista.com> + * + * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: + * Copyright (c) 2005 Koninklijke Philips Electronics N.V. + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef _PNX4008_GPIO_H_ +#define _PNX4008_GPIO_H_ + + +/* Block numbers */ +#define GPIO_IN (0) +#define GPIO_OUT (0x100) +#define GPIO_BID (0x200) +#define GPIO_RAM (0x300) +#define GPIO_MUX (0x400) + +#define GPIO_TYPE_MASK(K) ((K) & 0x700) + +/* INPUT GPIOs */ +/* GPI */ +#define GPI_00 (GPIO_IN | 0) +#define GPI_01 (GPIO_IN | 1) +#define GPI_02 (GPIO_IN | 2) +#define GPI_03 (GPIO_IN | 3) +#define GPI_04 (GPIO_IN | 4) +#define GPI_05 (GPIO_IN | 5) +#define GPI_06 (GPIO_IN | 6) +#define GPI_07 (GPIO_IN | 7) +#define GPI_08 (GPIO_IN | 8) +#define GPI_09 (GPIO_IN | 9) +#define U1_RX (GPIO_IN | 15) +#define U2_HTCS (GPIO_IN | 16) +#define U2_RX (GPIO_IN | 17) +#define U3_RX (GPIO_IN | 18) +#define U4_RX (GPIO_IN | 19) +#define U5_RX (GPIO_IN | 20) +#define U6_IRRX (GPIO_IN | 21) +#define U7_HCTS (GPIO_IN | 22) +#define U7_RX (GPIO_IN | 23) +/* MISC IN */ +#define SPI1_DATIN (GPIO_IN | 25) +#define DISP_SYNC (GPIO_IN | 26) +#define SPI2_DATIN (GPIO_IN | 27) +#define GPI_11 (GPIO_IN | 28) + +#define GPIO_IN_MASK 0x1eff83ff + +/* OUTPUT GPIOs */ +/* GPO */ +#define GPO_00 (GPIO_OUT | 0) +#define GPO_01 (GPIO_OUT | 1) +#define GPO_02 (GPIO_OUT | 2) +#define GPO_03 (GPIO_OUT | 3) +#define GPO_04 (GPIO_OUT | 4) +#define GPO_05 (GPIO_OUT | 5) +#define GPO_06 (GPIO_OUT | 6) +#define GPO_07 (GPIO_OUT | 7) +#define GPO_08 (GPIO_OUT | 8) +#define GPO_09 (GPIO_OUT | 9) +#define GPO_10 (GPIO_OUT | 10) +#define GPO_11 (GPIO_OUT | 11) +#define GPO_12 (GPIO_OUT | 12) +#define GPO_13 (GPIO_OUT | 13) +#define GPO_14 (GPIO_OUT | 14) +#define GPO_15 (GPIO_OUT | 15) +#define GPO_16 (GPIO_OUT | 16) +#define GPO_17 (GPIO_OUT | 17) +#define GPO_18 (GPIO_OUT | 18) +#define GPO_19 (GPIO_OUT | 19) +#define GPO_20 (GPIO_OUT | 20) +#define GPO_21 (GPIO_OUT | 21) +#define GPO_22 (GPIO_OUT | 22) +#define GPO_23 (GPIO_OUT | 23) + +#define GPIO_OUT_MASK 0xffffff + +/* BIDIRECTIONAL GPIOs */ +/* RAM pins */ +#define RAM_D19 (GPIO_RAM | 0) +#define RAM_D20 (GPIO_RAM | 1) +#define RAM_D21 (GPIO_RAM | 2) +#define RAM_D22 (GPIO_RAM | 3) +#define RAM_D23 (GPIO_RAM | 4) +#define RAM_D24 (GPIO_RAM | 5) +#define RAM_D25 (GPIO_RAM | 6) +#define RAM_D26 (GPIO_RAM | 7) +#define RAM_D27 (GPIO_RAM | 8) +#define RAM_D28 (GPIO_RAM | 9) +#define RAM_D29 (GPIO_RAM | 10) +#define RAM_D30 (GPIO_RAM | 11) +#define RAM_D31 (GPIO_RAM | 12) + +#define GPIO_RAM_MASK 0x1fff + +/* I/O pins */ +#define GPIO_00 (GPIO_BID | 25) +#define GPIO_01 (GPIO_BID | 26) +#define GPIO_02 (GPIO_BID | 27) +#define GPIO_03 (GPIO_BID | 28) +#define GPIO_04 (GPIO_BID | 29) +#define GPIO_05 (GPIO_BID | 30) + +#define GPIO_BID_MASK 0x7e000000 + +/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ +#define GPIO_SDRAM_SEL (GPIO_MUX | 3) + +#define GPIO_MUX_MASK 0x8 + +/* Extraction/assembly macros */ +#define GPIO_BIT_MASK(K) ((K) & 0x1F) +#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) +#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) +#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) +#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) +#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) +#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) + +/* Start Enable Pin Interrupts - table 58 page 66 */ + +#define SE_PIN_BASE_INT 32 + +#define SE_U7_RX_INT 63 +#define SE_U7_HCTS_INT 62 +#define SE_BT_CLKREQ_INT 61 +#define SE_U6_IRRX_INT 60 +/*59 unused*/ +#define SE_U5_RX_INT 58 +#define SE_GPI_11_INT 57 +#define SE_U3_RX_INT 56 +#define SE_U2_HCTS_INT 55 +#define SE_U2_RX_INT 54 +#define SE_U1_RX_INT 53 +#define SE_DISP_SYNC_INT 52 +/*51 unused*/ +#define SE_SDIO_INT_N 50 +#define SE_MSDIO_START_INT 49 +#define SE_GPI_06_INT 48 +#define SE_GPI_05_INT 47 +#define SE_GPI_04_INT 46 +#define SE_GPI_03_INT 45 +#define SE_GPI_02_INT 44 +#define SE_GPI_01_INT 43 +#define SE_GPI_00_INT 42 +#define SE_SYSCLKEN_PIN_INT 41 +#define SE_SPI1_DATAIN_INT 40 +#define SE_GPI_07_INT 39 +#define SE_SPI2_DATAIN_INT 38 +#define SE_GPI_10_INT 37 +#define SE_GPI_09_INT 36 +#define SE_GPI_08_INT 35 +/*34-32 unused*/ + +/* Start Enable Internal Interrupts - table 57 page 65 */ + +#define SE_INT_BASE_INT 0 + +#define SE_TS_IRQ 31 +#define SE_TS_P_INT 30 +#define SE_TS_AUX_INT 29 +/*27-28 unused*/ +#define SE_USB_AHB_NEED_CLK_INT 26 +#define SE_MSTIMER_INT 25 +#define SE_RTC_INT 24 +#define SE_USB_NEED_CLK_INT 23 +#define SE_USB_INT 22 +#define SE_USB_I2C_INT 21 +#define SE_USB_OTG_TIMER_INT 20 +#define SE_USB_OTG_ATX_INT_N 19 +/*18 unused*/ +#define SE_DSP_GPIO4_INT 17 +#define SE_KEY_IRQ 16 +#define SE_DSP_SLAVEPORT_INT 15 +#define SE_DSP_GPIO1_INT 14 +#define SE_DSP_GPIO0_INT 13 +#define SE_DSP_AHB_INT 12 +/*11-6 unused*/ +#define SE_GPIO_05_INT 5 +#define SE_GPIO_04_INT 4 +#define SE_GPIO_03_INT 3 +#define SE_GPIO_02_INT 2 +#define SE_GPIO_01_INT 1 +#define SE_GPIO_00_INT 0 + +#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) + +#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) +#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) +#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) +#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) + +extern int pnx4008_gpio_register_pin(unsigned short pin); +extern int pnx4008_gpio_unregister_pin(unsigned short pin); +extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); +extern int pnx4008_gpio_write_pin(unsigned short pin, int output); +extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); +extern int pnx4008_gpio_read_pin_direction(unsigned short pin); +extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); +extern int pnx4008_gpio_read_pin_mux(unsigned short pin); + +static inline void start_int_umask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_mask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_ack(u8 irq) +{ + __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); +} + +static inline void start_int_set_falling_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + +static inline void start_int_set_rising_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + +#endif /* _PNX4008_GPIO_H_ */ diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h new file mode 100644 index 00000000000..a4410397a92 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/hardware.h @@ -0,0 +1,32 @@ +/* + * linux/include/asm-arm/arch-pnx4008/hardware.h + * + * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> +#include <asm/arch/platform.h> + +/* Start of virtual addresses for IO devices */ +#define IO_BASE 0xF0000000 + +/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ +#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) + +#endif diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h new file mode 100644 index 00000000000..29ee43955c5 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/io.h @@ -0,0 +1,21 @@ + +/* + * include/asm-arm/arch-pnx4008/io.h + * + * Author: Dmitry Chigirev <chigirev@ru.mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h new file mode 100644 index 00000000000..fabff5dc337 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/irq.h @@ -0,0 +1,42 @@ +/* + * include/asm-arm/arch-pnx4008/irq.h + * + * PNX4008 IRQ controller driver - header file + * this one is used in entry-arnv.S as well so it cannot contain C code + * + * Copyright (c) 2005 Philips Semiconductors + * Copyright (c) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __PNX4008_IRQ_H__ +#define __PNX4008_IRQ_H__ + +#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) +#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) +#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) + +/* Manual: Chapter 20, page 195 */ + +#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) + +#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) +#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) +#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) +#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) +#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) +#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) + +#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) + +#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) +#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) +#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) +#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) + +extern void __init pnx4008_init_irq(void); + +#endif /* __PNX4008_IRQ_H__ */ diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h new file mode 100644 index 00000000000..13ec7ed0f50 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/irqs.h @@ -0,0 +1,215 @@ +/* + * include/asm-arm/arch-pnx4008/irqs.h + * + * PNX4008 IRQ controller driver - header file + * + * Author: Dmitry Chigirev <source@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PNX4008_IRQS_h__ +#define __PNX4008_IRQS_h__ + +#define NR_IRQS 96 + +/*Manual: table 259, page 199*/ + +/*SUB2 Interrupt Routing (SIC2)*/ + +#define SIC2_BASE_INT 64 + +#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ +#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ +#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ +#define GPI_06_INT 92 +#define GPI_05_INT 91 +#define GPI_04_INT 90 +#define GPI_03_INT 89 +#define GPI_02_INT 88 +#define GPI_01_INT 87 +#define GPI_00_INT 86 +#define BT_CLKREQ_INT 85 +#define SPI1_DATIN_INT 84 +#define U5_RX_INT 83 +#define SDIO_INT_N 82 +#define CAM_HS_INT 81 +#define CAM_VS_INT 80 +#define GPI_07_INT 79 +#define DISP_SYNC_INT 78 +#define DSP_INT8 77 +#define U7_HCTS_INT 76 +#define GPI_10_INT 75 +#define GPI_09_INT 74 +#define GPI_08_INT 73 +#define DSP_INT7 72 +#define U2_HCTS_INT 71 +#define SPI2_DATIN_INT 70 +#define GPIO_05_INT 69 +#define GPIO_04_INT 68 +#define GPIO_03_INT 67 +#define GPIO_02_INT 66 +#define GPIO_01_INT 65 +#define GPIO_00_INT 64 + +/*Manual: table 258, page 198*/ + +/*SUB1 Interrupt Routing (SIC1)*/ + +#define SIC1_BASE_INT 32 + +#define USB_I2C_INT 63 +#define USB_DEV_HP_INT 62 +#define USB_DEV_LP_INT 61 +#define USB_DEV_DMA_INT 60 +#define USB_HOST_INT 59 +#define USB_OTG_ATX_INT_N 58 +#define USB_OTG_TIMER_INT 57 +#define SW_INT 56 +#define SPI1_INT 55 +#define KEY_IRQ 54 +#define DSP_M_INT 53 +#define RTC_INT 52 +#define I2C_1_INT 51 +#define I2C_2_INT 50 +#define PLL1_LOCK_INT 49 +#define PLL2_LOCK_INT 48 +#define PLL3_LOCK_INT 47 +#define PLL4_LOCK_INT 46 +#define PLL5_LOCK_INT 45 +#define SPI2_INT 44 +#define DSP_INT1 43 +#define DSP_INT2 42 +#define DSP_TDM_INT2 41 +#define TS_AUX_INT 40 +#define TS_IRQ 39 +#define TS_P_INT 38 +#define UOUT1_TO_PAD_INT 37 +#define GPI_11_INT 36 +#define DSP_INT4 35 +#define JTAG_COMM_RX_INT 34 +#define JTAG_COMM_TX_INT 33 +#define DSP_INT3 32 + +/*Manual: table 257, page 197*/ + +/*MAIN Interrupt Routing*/ + +#define MAIN_BASE_INT 0 + +#define SUB2_FIQ_N 31 /*active low */ +#define SUB1_FIQ_N 30 /*active low */ +#define JPEG_INT 29 +#define DMA_INT 28 +#define MSTIMER_INT 27 +#define IIR1_INT 26 +#define IIR2_INT 25 +#define IIR7_INT 24 +#define DSP_TDM_INT0 23 +#define DSP_TDM_INT1 22 +#define DSP_P_INT 21 +#define DSP_INT0 20 +#define DUM_INT 19 +#define UOUT0_TO_PAD_INT 18 +#define MP4_ENC_INT 17 +#define MP4_DEC_INT 16 +#define SD0_INT 15 +#define MBX_INT 14 +#define SD1_INT 13 +#define MS_INT_N 12 +#define FLASH_INT 11 /*NAND*/ +#define IIR6_INT 10 +#define IIR5_INT 9 +#define IIR4_INT 8 +#define IIR3_INT 7 +#define WATCH_INT 6 +#define HSTIMER_INT 5 +#define ARCH_TIMER_IRQ HSTIMER_INT +#define CAM_INT 4 +#define PRNG_INT 3 +#define CRYPTO_INT 2 +#define SUB2_IRQ_N 1 /*active low */ +#define SUB1_IRQ_N 0 /*active low */ + +#define PNX4008_IRQ_TYPES \ +{ /*IRQ #'s: */ \ +IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \ +IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \ +IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \ +IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \ +IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \ +} + +/* Start Enable Pin Interrupts - table 58 page 66 */ + +#define SE_PIN_BASE_INT 32 + +#define SE_U7_RX_INT 63 +#define SE_U7_HCTS_INT 62 +#define SE_BT_CLKREQ_INT 61 +#define SE_U6_IRRX_INT 60 +/*59 unused*/ +#define SE_U5_RX_INT 58 +#define SE_GPI_11_INT 57 +#define SE_U3_RX_INT 56 +#define SE_U2_HCTS_INT 55 +#define SE_U2_RX_INT 54 +#define SE_U1_RX_INT 53 +#define SE_DISP_SYNC_INT 52 +/*51 unused*/ +#define SE_SDIO_INT_N 50 +#define SE_MSDIO_START_INT 49 +#define SE_GPI_06_INT 48 +#define SE_GPI_05_INT 47 +#define SE_GPI_04_INT 46 +#define SE_GPI_03_INT 45 +#define SE_GPI_02_INT 44 +#define SE_GPI_01_INT 43 +#define SE_GPI_00_INT 42 +#define SE_SYSCLKEN_PIN_INT 41 +#define SE_SPI1_DATAIN_INT 40 +#define SE_GPI_07_INT 39 +#define SE_SPI2_DATAIN_INT 38 +#define SE_GPI_10_INT 37 +#define SE_GPI_09_INT 36 +#define SE_GPI_08_INT 35 +/*34-32 unused*/ + +/* Start Enable Internal Interrupts - table 57 page 65 */ + +#define SE_INT_BASE_INT 0 + +#define SE_TS_IRQ 31 +#define SE_TS_P_INT 30 +#define SE_TS_AUX_INT 29 +/*27-28 unused*/ +#define SE_USB_AHB_NEED_CLK_INT 26 +#define SE_MSTIMER_INT 25 +#define SE_RTC_INT 24 +#define SE_USB_NEED_CLK_INT 23 +#define SE_USB_INT 22 +#define SE_USB_I2C_INT 21 +#define SE_USB_OTG_TIMER_INT 20 + +#endif /* __PNX4008_IRQS_h__ */ diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h new file mode 100644 index 00000000000..0d8268a9526 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/memory.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm-arm/arch-pnx4008/memory.h + * + * Copyright (c) 2005 Philips Semiconductors + * Copyright (c) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET (0x80000000) + +#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) +#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET) + +#endif diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h new file mode 100644 index 00000000000..95d5f547b41 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/param.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-pnx4008/param.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define HZ 100 diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h new file mode 100644 index 00000000000..485a3651b4d --- /dev/null +++ b/include/asm-arm/arch-pnx4008/platform.h @@ -0,0 +1,69 @@ +/* + * include/asm-arm/arch-pnx4008/platfrom.h + * + * PNX4008 Base addresses - header file + * + * Author: Dmitry Chigirev <source@mvista.com> + * + * Based on reference code received from Philips: + * Copyright (C) 2003 Philips Semiconductors + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + + +#ifndef __ASM_ARCH_PLATFORM_H__ +#define __ASM_ARCH_PLATFORM_H__ + +#define PNX4008_IRAM_BASE 0x08000000 +#define PNX4008_IRAM_SIZE 0x00010000 +#define PNX4008_YUV_SLAVE_BASE 0x10000000 +#define PNX4008_DUM_SLAVE_BASE 0x18000000 +#define PNX4008_NDF_FLASH_BASE 0x20020000 +#define PNX4008_SPI1_BASE 0x20088000 +#define PNX4008_SPI2_BASE 0x20090000 +#define PNX4008_SD_CONFIG_BASE 0x20098000 +#define PNX4008_FLASH_DATA 0x200B0000 +#define PNX4008_MLC_FLASH_BASE 0x200B8000 +#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 +#define PNX4008_DMA_CONFIG_BASE 0x31000000 +#define PNX4008_USB_CONFIG_BASE 0x31020000 +#define PNX4008_SDRAM_CFG_BASE 0x31080000 +#define PNX4008_AHB2FAB_BASE 0x40000000 +#define PNX4008_PWRMAN_BASE 0x40004000 +#define PNX4008_INTCTRLMIC_BASE 0x40008000 +#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 +#define PNX4008_INTCTRLSIC2_BASE 0x40010000 +#define PNX4008_HSUART1_BASE 0x40014000 +#define PNX4008_HSUART2_BASE 0x40018000 +#define PNX4008_HSUART7_BASE 0x4001C000 +#define PNX4008_RTC_BASE 0x40024000 +#define PNX4008_PIO_BASE 0x40028000 +#define PNX4008_MSTIMER_BASE 0x40034000 +#define PNX4008_HSTIMER_BASE 0x40038000 +#define PNX4008_WDOG_BASE 0x4003C000 +#define PNX4008_DEBUG_BASE 0x40040000 +#define PNX4008_TOUCH1_BASE 0x40048000 +#define PNX4008_KEYSCAN_BASE 0x40050000 +#define PNX4008_UARTCTRL_BASE 0x40054000 +#define PNX4008_PWM_BASE 0x4005C000 +#define PNX4008_UART3_BASE 0x40080000 +#define PNX4008_UART4_BASE 0x40088000 +#define PNX4008_UART5_BASE 0x40090000 +#define PNX4008_UART6_BASE 0x40098000 +#define PNX4008_I2C1_BASE 0x400A0000 +#define PNX4008_I2C2_BASE 0x400A8000 +#define PNX4008_MAGICGATE_BASE 0x400B0000 +#define PNX4008_DUMCONF_BASE 0x400B8000 +#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 +#define PNX4008_DSP_BASE 0x400C0000 +#define PNX4008_PROFCOUNTER_BASE 0x400C8000 +#define PNX4008_CRYPTO_BASE 0x400D0000 +#define PNX4008_CAMIFCONF_BASE 0x400D8000 +#define PNX4008_YUV2RGB_BASE 0x400E0000 +#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 + +#endif diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h new file mode 100644 index 00000000000..bac1634cb3e --- /dev/null +++ b/include/asm-arm/arch-pnx4008/pm.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-pnx4008/pm.h + * + * PNX4008 Power Management Routiness - header file + * + * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARCH_PNX4008_PM_H +#define __ASM_ARCH_PNX4008_PM_H + +#ifndef __ASSEMBLER__ +#include "irq.h" +#include "irqs.h" +#include "clock.h" + +extern void pnx4008_pm_idle(void); +extern void pnx4008_pm_suspend(void); +extern unsigned int pnx4008_cpu_suspend_sz; +extern void pnx4008_cpu_suspend(void); +extern unsigned int pnx4008_cpu_standby_sz; +extern void pnx4008_cpu_standby(void); + +extern int pnx4008_startup_pll(struct clk *); +extern int pnx4008_shutdown_pll(struct clk *); + +#endif /* ASSEMBLER */ +#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h new file mode 100644 index 00000000000..6e3da70ab10 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/system.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/arch-pnx4008/system.h + * + * Copyright (C) 2003 Philips Semiconductors + * Copyright (C) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/arch/platform.h> + +static void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h new file mode 100644 index 00000000000..ee470a39089 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/timex.h @@ -0,0 +1,73 @@ +/* + * include/asm-arm/arch-pnx4008/timex.h + * + * PNX4008 timers header file + * + * Author: Dmitry Chigirev <source@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __PNX4008_TIMEX_H +#define __PNX4008_TIMEX_H + +#include <asm/hardware.h> +#include <asm/io.h> + +#define CLOCK_TICK_RATE 1000000 + +#define TICKS2USECS(x) (x) + +/* MilliSecond Timer - Chapter 21 Page 202 */ + +#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) +#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) +#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) +#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) +#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) +#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) + +/* High Speed Timer - Chpater 22, Page 205 */ + +#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) +#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) +#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) +#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) +#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) +#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) +#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) +#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) +#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) +#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) +#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) +#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) + +/* IMPORTANT: both timers are UPCOUNTING */ + +/* xSTIM_MCTRL bit definitions */ +#define MR0_INT 1 +#define RESET_COUNT0 (1<<1) +#define STOP_COUNT0 (1<<2) +#define MR1_INT (1<<3) +#define RESET_COUNT1 (1<<4) +#define STOP_COUNT1 (1<<5) +#define MR2_INT (1<<6) +#define RESET_COUNT2 (1<<7) +#define STOP_COUNT2 (1<<8) + +/* xSTIM_CTRL bit definitions */ +#define COUNT_ENAB 1 +#define RESET_COUNT (1<<1) +#define DEBUG_EN (1<<2) + +/* xSTIM_INT bit definitions */ +#define MATCH0_INT 1 +#define MATCH1_INT (1<<1) +#define MATCH2_INT (1<<2) +#define RTC_TICK0 (1<<4) +#define RTC_TICK1 (1<<5) + +#endif diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h new file mode 100644 index 00000000000..8fa4d24b72b --- /dev/null +++ b/include/asm-arm/arch-pnx4008/uncompress.h @@ -0,0 +1,46 @@ +/* + * linux/include/asm-arm/arch-pnx4008/uncompress.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define UART5_BASE 0x40090000 + +#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) +#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) + +static __inline__ void putc(char c) +{ + while (UART5_FR & (1 << 5)) + barrier(); + + UART5_DR = c; +} + +/* + * This does not append a newline + */ +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h new file mode 100644 index 00000000000..140d925f6f3 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/vmalloc.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-pnx4008/vmalloc.h + * + * Author: Vitaly Wool <source@mvista.com> + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h index e7ef497417b..b6952534a4e 100644 --- a/include/asm-arm/arch-pxa/idp.h +++ b/include/asm-arm/arch-pxa/idp.h @@ -15,7 +15,6 @@ * Changes for 2.6 kernel. */ -#include <linux/config.h> /* * Note: this file must be safe to include in assembly files diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h index eb2dd58d397..7f8d817b446 100644 --- a/include/asm-arm/arch-pxa/io.h +++ b/include/asm-arm/arch-pxa/io.h @@ -16,6 +16,5 @@ */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index 67af238a8f8..f3bc70eee35 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #ifdef CONFIG_PXA27x #define PXA_IRQ_SKIP 0 diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h index 6b5ac5144e7..4d6a4031576 100644 --- a/include/asm-arm/arch-pxa/poodle.h +++ b/include/asm-arm/arch-pxa/poodle.h @@ -31,6 +31,7 @@ #define POODLE_GPIO_CF_CD (14) #define POODLE_GPIO_CF_STSCHG (14) #define POODLE_GPIO_SD_PWR (33) +#define POODLE_GPIO_SD_PWR1 (3) #define POODLE_GPIO_nSD_CLK (6) #define POODLE_GPIO_nSD_WP (7) #define POODLE_GPIO_nSD_INT (8) @@ -42,6 +43,7 @@ #define POODLE_GPIO_BYPASS_ON (36) #define POODLE_GPIO_CHRG_ON (38) #define POODLE_GPIO_CHRG_FULL (16) +#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ #define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) @@ -68,4 +70,6 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) +extern struct platform_device poodle_locomo_device; + #endif /* __ASM_ARCH_POODLE_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index c8f53a71c07..9f83f4adfbf 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -13,7 +13,6 @@ #ifndef __PXA_REGS_H #define __PXA_REGS_H -#include <linux/config.h> /* * PXA Chip selects @@ -1626,7 +1625,7 @@ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(c) ((x) - 1) /* Time slots per frame [1..8] */ +#define SSCR0_SlotsPerFrm(x) ((x) - 1) /* Time slots per frame [1..8] */ #define SSCR0_ADC (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif @@ -1707,6 +1706,10 @@ #if defined (CONFIG_PXA27x) #define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ #define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ +#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */ +#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */ +#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */ +#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */ #define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */ #define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */ #define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */ @@ -1714,6 +1717,10 @@ #define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ #define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */ #define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */ +#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */ +#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */ +#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */ +#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */ #define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */ #define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */ #define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */ @@ -1721,6 +1728,10 @@ #define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ #define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */ #define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */ +#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */ +#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */ +#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */ +#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */ #else /* PXA255 (only port 2) and PXA26x ports*/ #define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ #define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ @@ -1747,6 +1758,10 @@ #define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL)) #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) +#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL)) +#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL)) +#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL)) +#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL)) /* * MultiMediaCard (MMC) controller diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 840a46bfbc5..1d56a3ef89f 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <asm/proc-fns.h> #include "hardware.h" #include "pxa-regs.h" diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h index aa125ec56a3..2473bb51d0a 100644 --- a/include/asm-arm/arch-pxa/timex.h +++ b/include/asm-arm/arch-pxa/timex.h @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #if defined(CONFIG_PXA25x) /* PXA250/210 timer base */ diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h index d444a68ac33..c70f1dfbe13 100644 --- a/include/asm-arm/arch-realview/io.h +++ b/include/asm-arm/arch-realview/io.h @@ -29,6 +29,5 @@ static inline void __iomem *__io(unsigned long addr) #define __io(a) __io(a) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-realview/smp.h b/include/asm-arm/arch-realview/smp.h index fc87783e8e8..515819efd04 100644 --- a/include/asm-arm/arch-realview/smp.h +++ b/include/asm-arm/arch-realview/smp.h @@ -1,7 +1,6 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H -#include <linux/config.h> #include <asm/hardware/gic.h> diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 5f8223e700d..b7d15d12545 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -33,7 +33,7 @@ .endm .macro senduart,rd,rx - str \rd, [\rx, # S3C2410_UTXH ] + strb \rd, [\rx, # S3C2410_UTXH ] .endm .macro busyuart, rd, rx @@ -42,6 +42,12 @@ beq 1001f @ @ FIFO enabled... 1003: + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 1004f mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -50,7 +56,7 @@ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? - +1004: ldr \rd, [ \rx, # S3C2410_UFSTAT ] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index b011e14f3bc..72964f9b841 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -18,7 +18,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#include <linux/config.h> #include <linux/sysdev.h> #include "hardware.h" diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index 894c35cf3b1..e09a6b8ec15 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -18,8 +18,6 @@ #define INTPND (0x10) #define INTOFFSET (0x14) -#define EXTINTPEND (0xa8) -#define EXTINTMASK (0xa4) #include <asm/hardware.h> #include <asm/arch/irqs.h> @@ -28,37 +26,23 @@ mov \base, #S3C24XX_VA_IRQ - ldr \irqstat, [ \base, #INTPND] - bics \irqnr, \irqstat, #3<<4 @@ only an GPIO IRQ - beq 2000f - @@ try the interrupt offset register, since it is there + ldr \irqstat, [ \base, #INTPND ] + teq \irqstat, #0 + beq 1002f ldr \irqnr, [ \base, #INTOFFSET ] mov \tmp, #1 tst \irqstat, \tmp, lsl \irqnr - addne \irqnr, \irqnr, #IRQ_EINT0 bne 1001f @@ the number specified is not a valid irq, so try @@ and work it out for ourselves - mov \irqnr, #IRQ_EINT0 @@ start here - b 3000f - -2000: - @@ load the GPIO interrupt register, and check it - - add \tmp, \base, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ - ldr \irqstat, [ \tmp, # EXTINTPEND ] - ldr \irqnr, [ \tmp, # EXTINTMASK ] - bics \irqstat, \irqstat, \irqnr - beq 1001f - - mov \irqnr, #(IRQ_EINT4 - 4) + mov \irqnr, #0 @@ start here @@ work out which irq (if any) we got -3000: + movs \tmp, \irqstat, lsl#16 addeq \irqnr, \irqnr, #16 moveq \irqstat, \irqstat, lsr#16 @@ -75,9 +59,9 @@ addeq \irqnr, \irqnr, #1 @@ we have the value - movs \irqnr, \irqnr - 1001: + adds \irqnr, \irqnr, #IRQ_EINT0 +1002: @@ exit here, Z flag unset if IRQ .endm diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index c380d264a84..fae2766ff32 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -126,9 +126,18 @@ #define S3C24XX_SZ_IIS SZ_1M /* GPIO ports */ -#define S3C24XX_VA_GPIO S3C2410_ADDR(0x00E00000) + +/* the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 maping. This puts it (currently) at + * 0xF6800000, which is not in the way of any current mapping + * by the base system. +*/ + #define S3C2400_PA_GPIO (0x15600000) #define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) #define S3C24XX_SZ_GPIO SZ_1M /* RTC */ @@ -227,4 +236,20 @@ #define S3C24XX_PA_SPI S3C2410_PA_SPI #endif +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + #endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index 34360706e01..a7c61feb843 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -1,6 +1,6 @@ /* linux/include/asm/arch-s3c2410/regs-clock.h * - * Copyright (c) 2003,2004,2005 Simtec Electronics <linux@simtec.co.uk> + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify @@ -114,7 +114,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #endif /* __ASSEMBLY__ */ -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) /* extra registers */ #define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) @@ -136,7 +136,70 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) #define S3C2440_CAMDIVN_DVSEN (1<<12) -#endif /* CONFIG_CPU_S3C2440 */ - +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) + +#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + +#define S3C2412_OSCSET S3C2410_CLKREG(0x18) +#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) + +#define S3C2412_PLLCON_OFF (1<<20) + +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) + +#define S3C2412_CLKCON_WDT (1<<28) +#define S3C2412_CLKCON_SPI (1<<27) +#define S3C2412_CLKCON_IIS (1<<26) +#define S3C2412_CLKCON_IIC (1<<25) +#define S3C2412_CLKCON_ADC (1<<24) +#define S3C2412_CLKCON_RTC (1<<23) +#define S3C2412_CLKCON_GPIO (1<<22) +#define S3C2412_CLKCON_UART2 (1<<21) +#define S3C2412_CLKCON_UART1 (1<<20) +#define S3C2412_CLKCON_UART0 (1<<19) +#define S3C2412_CLKCON_SDI (1<<18) +#define S3C2412_CLKCON_PWMT (1<<17) +#define S3C2412_CLKCON_USBD (1<<16) +#define S3C2412_CLKCON_CAMCLK (1<<15) +#define S3C2412_CLKCON_UARTCLK (1<<14) +/* missing 13 */ +#define S3C2412_CLKCON_USB_HOST48 (1<<12) +#define S3C2412_CLKCON_USB_DEV48 (1<<11) +#define S3C2412_CLKCON_HCLKdiv2 (1<<10) +#define S3C2412_CLKCON_HCLKx2 (1<<9) +#define S3C2412_CLKCON_SDRAM (1<<8) +/* missing 7 */ +#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH +#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC +#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND +#define S3C2412_CLKCON_DMA3 (1<<3) +#define S3C2412_CLKCON_DMA2 (1<<2) +#define S3C2412_CLKCON_DMA1 (1<<1) +#define S3C2412_CLKCON_DMA0 (1<<0) + +/* clock sourec controls */ + +#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) +#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) +#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) +#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) +#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) +#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) +#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) +#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) +#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) + +#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ #endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h index a023b0434ef..a0a12487516 100644 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ b/include/asm-arm/arch-s3c2410/regs-dsc.h @@ -7,18 +7,19 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * S3C2440 Signal Drive Strength Control - * - * Changelog: - * 11-Aug-2004 BJD Created file - * 25-Aug-2004 BJD Added the _SELECT_* defs for using with functions + * S3C2440/S3C2412 Signal Drive Strength Control */ #ifndef __ASM_ARCH_REGS_DSC_H #define __ASM_ARCH_REGS_DSC_H "2440-dsc" -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2412) +#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) +#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) +#endif + +#if defined(CONFIG_CPU_S3C2440) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) @@ -170,7 +171,7 @@ #define S3C2440_DSC1_CS1_4mA (3<<2) #define S3C2440_DSC1_CS1_MASK (3<<2) -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0 +#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) #define S3C2440_DSC1_CS0_10mA (0<<0) #define S3C2440_DSC1_CS0_8mA (1<<0) #define S3C2440_DSC1_CS0_6mA (2<<0) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index d2574084697..6dd17f0f84e 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -45,7 +45,7 @@ #define S3C24XX_MISCCR S3C2400_MISCCR #else #define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2410_MISCCR +#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) #endif /* CONFIG_CPU_S3C2400 */ @@ -73,9 +73,15 @@ #define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ -/* configure GPIO ports A..G */ +/* register address for the GPIO registers. + * S3C24XX_GPIOREG2 is for the second set of registers in the + * GPIO which move between s3c2410 and s3c2412 type systems */ #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) + + +/* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output * S3C2400: 18bits, zero in bit X makes pin X output @@ -450,12 +456,14 @@ #define S3C2410_GPD0_OUTP (0x01 << 0) #define S3C2410_GPD0_VD8 (0x02 << 0) #define S3C2400_GPD0_VFRAME (0x02 << 0) +#define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) #define S3C2410_GPD1_INP (0x00 << 2) #define S3C2410_GPD1_OUTP (0x01 << 2) #define S3C2410_GPD1_VD9 (0x02 << 2) #define S3C2400_GPD1_VM (0x02 << 2) +#define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) #define S3C2410_GPD2_INP (0x00 << 4) @@ -858,6 +866,7 @@ #define S3C2410_GPG12_OUTP (0x01 << 24) #define S3C2410_GPG12_EINT20 (0x02 << 24) #define S3C2410_GPG12_XMON (0x03 << 24) +#define S3C2442_GPG12_nSPICS0 (0x03 << 24) #define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) #define S3C2410_GPG13_INP (0x00 << 26) @@ -943,17 +952,25 @@ #define S3C2410_GPH9_INP (0x00 << 18) #define S3C2410_GPH9_OUTP (0x01 << 18) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) +#define S3C2442_GPH9_nSPICS0 (0x03 << 18) #define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) #define S3C2410_GPH10_INP (0x00 << 20) #define S3C2410_GPH10_OUTP (0x01 << 20) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) +/* The S3C2412 and S3C2413 move the GPJ register set to after + * GPH, which means all registers after 0x80 are now offset by 0x10 + * for the 2412/2413 from the 2410/2440/2442 +*/ + /* miscellaneous control */ #define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) +#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) + /* see clock.h for dclk definitions */ /* pullup control on databus */ @@ -981,6 +998,8 @@ #define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) #define S3C2410_MISCCR_CLK0_MASK (7<<4) +#define S3C2412_MISCCR_CLK0_RTC (2<<4) + #define S3C2410_MISCCR_CLK1_MPLL (0<<8) #define S3C2410_MISCCR_CLK1_UPLL (1<<8) #define S3C2410_MISCCR_CLK1_FCLK (2<<8) @@ -989,6 +1008,8 @@ #define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) #define S3C2410_MISCCR_CLK1_MASK (7<<8) +#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) + #define S3C2410_MISCCR_USBSUSPND0 (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) @@ -996,7 +1017,7 @@ #define S3C2410_MISCCR_nEN_SCLK0 (1<<17) #define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) +#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ #define S3C2410_MISCCR_SDSLEEP (7<<17) /* external interrupt control... */ @@ -1013,6 +1034,10 @@ #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) +#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) +#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) +#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) + /* values for S3C2410_EXTINT0/1/2 */ #define S3C2410_EXTINT_LOWLEV (0x00) #define S3C2410_EXTINT_HILEV (0x01) @@ -1026,6 +1051,11 @@ #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) #define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) +#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) +#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) +#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) +#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) + /* values for interrupt filtering */ #define S3C2410_EINTFLT_PCLK (0x00) #define S3C2410_EINTFLT_EXTCLK (1<<7) @@ -1035,6 +1065,7 @@ /* GSTATUS have miscellaneous information in them * + * These move between s3c2410 and s3c2412 style systems. */ #define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) @@ -1043,6 +1074,18 @@ #define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) #define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) +#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) +#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) +#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) +#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) +#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) + +#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) +#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) +#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) +#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) +#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) + #define S3C2410_GSTATUS0_nWAIT (1<<3) #define S3C2410_GSTATUS0_NCON (1<<2) #define S3C2410_GSTATUS0_RnB (1<<1) @@ -1050,7 +1093,9 @@ #define S3C2410_GSTATUS1_IDMASK (0xffff0000) #define S3C2410_GSTATUS1_2410 (0x32410000) +#define S3C2410_GSTATUS1_2412 (0x32412001) #define S3C2410_GSTATUS1_2440 (0x32440000) +#define S3C2410_GSTATUS1_2442 (0x32440aaa) #define S3C2410_GSTATUS2_WTRESET (1<<2) #define S3C2410_GSTATUS2_OFFRESET (1<<1) @@ -1072,5 +1117,22 @@ #define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) #define S3C2400_OPENCR_OPC_MOSIEN (1<<5) +/* 2412/2413 sleep configuration registers */ + +#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) +#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) +#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) +#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C) +#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) +#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) +#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) + +/* definitions for each pin bit */ +#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) +#define S3C2412_SLPCON_HI(x) ( 0x01 << ((x) * 2)) +#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) +#define S3C2412_SLPCON_PDWN(x) ( 0x03 << ((x) * 2)) +#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h index 3ad2324acc3..18edae50d0b 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -32,6 +32,11 @@ #define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) #define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + #define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) #define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h index 24b7292df79..572fca5d9ac 100644 --- a/include/asm-arm/arch-s3c2410/regs-irq.h +++ b/include/asm-arm/arch-s3c2410/regs-irq.h @@ -23,6 +23,7 @@ #define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) #define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) #define S3C2410_SRCPND S3C2410_IRQREG(0x000) #define S3C2410_INTMOD S3C2410_IRQREG(0x004) @@ -40,5 +41,10 @@ #define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) #define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) +#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) +#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) + +#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) +#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) #endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h index 7cff235e667..c1470c695c3 100644 --- a/include/asm-arm/arch-s3c2410/regs-nand.h +++ b/include/asm-arm/arch-s3c2410/regs-nand.h @@ -39,10 +39,19 @@ #define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) #define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) #define S3C2440_NFMECC1 S3C2410_NFREG(0x30) -#define S3C2440_NFSECC S3C2410_NFREG(0x34) +#define S3C2440_NFSECC S3C24E10_NFREG(0x34) #define S3C2440_NFSBLK S3C2410_NFREG(0x38) #define S3C2440_NFEBLK S3C2410_NFREG(0x3C) +#define S3C2412_NFSBLK S3C2410_NFREG(0x20) +#define S3C2412_NFEBLK S3C2410_NFREG(0x24) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) +#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) +#define S3C2412_NFSECC S3C2410_NFREG(0x3C) + #define S3C2410_NFCONF_EN (1<<15) #define S3C2410_NFCONF_512BYTE (1<<14) #define S3C2410_NFCONF_4STEP (1<<13) @@ -77,5 +86,42 @@ #define S3C2440_NFSTAT_RnB_CHANGE (1<<2) #define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONF_ECCCLKCON (1<<30) +#define S3C2412_NFCONF_ECC_MLC (1<<24) +#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ + +#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) +#define S3C2412_NFCONT_LOCKTIGHT (1<<17) +#define S3C2412_NFCONT_SOFTLOCK (1<<16) +#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) +#define S3C2412_NFCONT_ECC4_DECINT (1<<12) +#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE1 (1<<2) +#define S3C2412_NFCONT_nFCE0 (1<<1) + +#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) +#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) +#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) +#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) +#define S3C2412_NFSTAT_nFCE1 (1<<3) +#define S3C2412_NFSTAT_nFCE0 (1<<2) +#define S3C2412_NFSTAT_Res1 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + +#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) +#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) +#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) +#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) +#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_NONE (0) +#define S3C2412_NFECCERR_1BIT (1) +#define S3C2412_NFECCERR_MULTIBIT (2) +#define S3C2412_NFECCERR_ECCAREA (3) + + + #endif /* __ASM_ARM_REGS_NAND */ diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index 83b01254c4a..93f651ae296 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -82,6 +82,12 @@ #define S3C2440_UCON2_DIVMASK (7 << 12) #define S3C2440_UCON_DIVSHIFT (12) +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + #define S3C2410_UCON_UCLK (1<<10) #define S3C2410_UCON_SBREAK (1<<4) @@ -124,6 +130,15 @@ #define S3C2410_UMCOM_AFC (1<<4) #define S3C2410_UMCOM_RTS_LOW (1<<0) +#define S3C2412_UMCON_AFC_63 (0<<5) +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + #define S3C2410_UFSTAT_TXFULL (1<<9) #define S3C2410_UFSTAT_RXFULL (1<<8) #define S3C2410_UFSTAT_TXMASK (15<<4) diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index a6f6a0e44af..8e152a05e53 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -22,7 +22,6 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include <linux/config.h> /* defines for UART registers */ #include "asm/arch/regs-serial.h" @@ -82,7 +81,8 @@ static void putc(int ch) while (1) { level = uart_rd(S3C2410_UFSTAT); - if (cpuid == S3C2410_GSTATUS1_2440) { + if (cpuid == S3C2410_GSTATUS1_2440 || + cpuid == S3C2410_GSTATUS1_2442) { level &= S3C2440_UFSTAT_TXMASK; level >>= S3C2440_UFSTAT_TXSHIFT; } else { @@ -130,7 +130,7 @@ static void arch_decomp_wdog_start(void) { __raw_writel(WDOG_COUNT, S3C2410_WTDAT); __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); } #else diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h index 1f59b368c3f..d6a1bb5b494 100644 --- a/include/asm-arm/arch-sa1100/assabet.h +++ b/include/asm-arm/arch-sa1100/assabet.h @@ -12,7 +12,6 @@ #ifndef __ASM_ARCH_ASSABET_H #define __ASM_ARCH_ASSABET_H -#include <linux/config.h> /* System Configuration Register flags */ diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h index 356d5ba8899..9a19c3d07c1 100644 --- a/include/asm-arm/arch-sa1100/cerf.h +++ b/include/asm-arm/arch-sa1100/cerf.h @@ -10,7 +10,6 @@ #ifndef _INCLUDE_CERF_H_ #define _INCLUDE_CERF_H_ -#include <linux/config.h> #define CERF_ETH_IO 0xf0000000 #define CERF_ETH_IRQ IRQ_GPIO26 diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h index d49e5ff63ca..14a344aa3cc 100644 --- a/include/asm-arm/arch-sa1100/collie.h +++ b/include/asm-arm/arch-sa1100/collie.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H -#include <linux/config.h> #define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 #define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h index 02575d72ac6..6b7917a2e77 100644 --- a/include/asm-arm/arch-sa1100/dma.h +++ b/include/asm-arm/arch-sa1100/dma.h @@ -10,7 +10,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/config.h> #include "hardware.h" diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h index ee008a5484f..1abd7cfc8bc 100644 --- a/include/asm-arm/arch-sa1100/hardware.h +++ b/include/asm-arm/arch-sa1100/hardware.h @@ -12,7 +12,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <linux/config.h> #define UNCACHEABLE_ADDR 0xfa050000 diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h index 2153538069c..98b10bcf9f1 100644 --- a/include/asm-arm/arch-sa1100/ide.h +++ b/include/asm-arm/arch-sa1100/ide.h @@ -9,7 +9,6 @@ * architectures. */ -#include <linux/config.h> #include <asm/irq.h> #include <asm/hardware.h> #include <asm/mach-types.h> diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h index 040ccde7a11..0756269404b 100644 --- a/include/asm-arm/arch-sa1100/io.h +++ b/include/asm-arm/arch-sa1100/io.h @@ -22,6 +22,5 @@ static inline void __iomem *__io(unsigned long addr) } #define __io(a) __io(a) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h index eabd3be3d70..d7940683efb 100644 --- a/include/asm-arm/arch-sa1100/irqs.h +++ b/include/asm-arm/arch-sa1100/irqs.h @@ -7,7 +7,6 @@ * * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. */ -#include <linux/config.h> #define IRQ_GPIO0 0 #define IRQ_GPIO1 1 diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h index a29fac1387c..1ff172dc8e3 100644 --- a/include/asm-arm/arch-sa1100/memory.h +++ b/include/asm-arm/arch-sa1100/memory.h @@ -7,7 +7,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <linux/config.h> #include <asm/sizes.h> /* diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h index 0f0612f79b2..aef91e3b63f 100644 --- a/include/asm-arm/arch-sa1100/system.h +++ b/include/asm-arm/arch-sa1100/system.h @@ -3,7 +3,6 @@ * * Copyright (c) 1999 Nicolas Pitre <nico@cam.org> */ -#include <linux/config.h> #include <asm/hardware.h> static inline void arch_idle(void) diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index 47e904cf25c..c4d01948e00 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -28,6 +28,5 @@ static inline void __iomem *__io(unsigned long addr) } #define __io(a) __io(a) #define __mem_pci(a) (a) -#define __mem_isa(a) (a) #endif diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h index 8889a189739..71c6254c0d9 100644 --- a/include/asm-arm/arch-versatile/system.h +++ b/include/asm-arm/arch-versatile/system.h @@ -36,16 +36,14 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - unsigned int hdr_ctrl = (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_RESETCTL_OFFSET); - unsigned int val; + u32 val; - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - val = __raw_readl(hdr_ctrl); - val |= VERSATILE_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; + val |= 0x105; + + __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); + __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); + __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); } #endif diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h index d53bafa9bf1..fce83282082 100644 --- a/include/asm-arm/assembler.h +++ b/include/asm-arm/assembler.h @@ -55,30 +55,6 @@ #define PLD(code...) #endif -#define MODE_USR USR_MODE -#define MODE_FIQ FIQ_MODE -#define MODE_IRQ IRQ_MODE -#define MODE_SVC SVC_MODE - -#define DEFAULT_FIQ MODE_FIQ - -/* - * LOADREGS - ldm with PC in register list (eg, ldmfd sp!, {pc}) - */ -#ifdef __STDC__ -#define LOADREGS(cond, base, reglist...)\ - ldm##cond base,reglist -#else -#define LOADREGS(cond, base, reglist...)\ - ldm/**/cond base,reglist -#endif - -/* - * Build a return instruction for this processor type. - */ -#define RETINSTR(instr, regs...)\ - instr regs - /* * Enable and disable interrupts */ @@ -117,18 +93,6 @@ msr cpsr_c, \oldcpsr .endm -/* - * These two are used to save LR/restore PC over a user-based access. - * The old 26-bit architecture requires that we do. On 32-bit - * architecture, we can safely ignore this requirement. - */ - .macro save_lr - .endm - - .macro restore_pc - mov pc, lr - .endm - #define USER(x...) \ 9999: x; \ .section __ex_table,"a"; \ diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 3d7283d8440..4b0ce3e7de9 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARM_ATOMIC_H #define __ASM_ARM_ATOMIC_H -#include <linux/config.h> #include <linux/compiler.h> typedef struct { volatile int counter; } atomic_t; diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h index 5ab8216f520..7fb02138f58 100644 --- a/include/asm-arm/bug.h +++ b/include/asm-arm/bug.h @@ -2,7 +2,6 @@ #define _ASMARM_BUG_H #include <linux/config.h> -#include <linux/stddef.h> #ifdef CONFIG_BUG #ifdef CONFIG_DEBUG_BUGVERBOSE diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h index 4c80ec519d4..ca54eb0f12d 100644 --- a/include/asm-arm/bugs.h +++ b/include/asm-arm/bugs.h @@ -10,8 +10,12 @@ #ifndef __ASM_BUGS_H #define __ASM_BUGS_H +#ifdef CONFIG_MMU extern void check_writebuffer_bugs(void); #define check_bugs() check_writebuffer_bugs() +#else +#define check_bugs() do { } while (0) +#endif #endif diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h index 17eaf8bdf09..e6f7fcdc73b 100644 --- a/include/asm-arm/byteorder.h +++ b/include/asm-arm/byteorder.h @@ -22,16 +22,18 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 t; - if (__builtin_constant_p(x)) { - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - } else { +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { /* * The compiler needs a bit of a hint here to always do the * right thing and not screw it up to different degrees * depending on the gcc version. */ asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 746be56b1b7..fe0c744e026 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -10,7 +10,6 @@ #ifndef _ASMARM_CACHEFLUSH_H #define _ASMARM_CACHEFLUSH_H -#include <linux/config.h> #include <linux/sched.h> #include <linux/mm.h> diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h index 751bc746207..715426b9b08 100644 --- a/include/asm-arm/cpu.h +++ b/include/asm-arm/cpu.h @@ -10,7 +10,6 @@ #ifndef __ASM_ARM_CPU_H #define __ASM_ARM_CPU_H -#include <linux/config.h> #include <linux/percpu.h> struct cpuinfo_arm { diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index 63ca7412a46..55eb4dc3253 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -3,7 +3,6 @@ #ifdef __KERNEL__ -#include <linux/config.h> #include <linux/mm.h> /* need struct page */ #include <asm/scatterlist.h> diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h index 49c01e2bf7c..9f2c5305c26 100644 --- a/include/asm-arm/dma.h +++ b/include/asm-arm/dma.h @@ -3,7 +3,6 @@ typedef unsigned int dmach_t; -#include <linux/config.h> #include <linux/spinlock.h> #include <asm/system.h> #include <asm/scatterlist.h> diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h index f8ea2de4848..4c2885abbe6 100644 --- a/include/asm-arm/domain.h +++ b/include/asm-arm/domain.h @@ -50,6 +50,8 @@ #define domain_val(dom,type) ((type) << (2*(dom))) #ifndef __ASSEMBLY__ + +#ifdef CONFIG_MMU #define set_domain(x) \ do { \ __asm__ __volatile__( \ @@ -66,5 +68,10 @@ set_domain(thread->cpu_domain); \ } while (0) +#else +#define set_domain(x) do { } while (0) +#define modify_domain(dom,type) do { } while (0) +#endif + #endif #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index 2d44b42d184..71061ca5c5d 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -1,7 +1,6 @@ #ifndef __ASMARM_ELF_H #define __ASMARM_ELF_H -#include <linux/config.h> /* * ELF register definitions.. diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h index 6ea657c886b..aa0c8d28d8d 100644 --- a/include/asm-arm/floppy.h +++ b/include/asm-arm/floppy.h @@ -25,7 +25,7 @@ #define fd_inb(port) inb((port)) #define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ - SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL) + SA_INTERRUPT,"floppy",NULL) #define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) #define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) #define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index 52bae088a18..6af4e6bd129 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARM_FPSTATE_H #define __ASM_ARM_FPSTATE_H -#include <linux/config.h> #ifndef __ASSEMBLY__ @@ -73,6 +72,14 @@ union fp_state { #define FP_SIZE (sizeof(union fp_state) / sizeof(int)) +struct crunch_state { + unsigned int mvdx[16][2]; + unsigned int mvax[4][3]; + unsigned int dspsc[2]; +}; + +#define CRUNCH_SIZE sizeof(struct crunch_state) + #endif #endif diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h index 223e0d6c41b..0cc5d3b10ce 100644 --- a/include/asm-arm/glue.h +++ b/include/asm-arm/glue.h @@ -15,7 +15,6 @@ */ #ifdef __KERNEL__ -#include <linux/config.h> #ifdef __STDC__ #define ____glue(name,fn) name##fn diff --git a/include/asm-arm/hardirq.h b/include/asm-arm/hardirq.h index 1cbb173bf5b..182310b9919 100644 --- a/include/asm-arm/hardirq.h +++ b/include/asm-arm/hardirq.h @@ -1,7 +1,6 @@ #ifndef __ASM_HARDIRQ_H #define __ASM_HARDIRQ_H -#include <linux/config.h> #include <linux/cache.h> #include <linux/threads.h> #include <asm/irq.h> diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h index 6685e3fb97b..546f7077be9 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/include/asm-arm/hardware/dec21285.h @@ -18,7 +18,6 @@ #define DC21285_PCI_IO 0x7c000000 #define DC21285_PCI_MEM 0x80000000 -#include <linux/config.h> #ifndef __ASSEMBLY__ #include <asm/hardware.h> #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h index 82fa2c279a1..396e55ad06c 100644 --- a/include/asm-arm/hardware/iomd.h +++ b/include/asm-arm/hardware/iomd.h @@ -13,7 +13,6 @@ #ifndef __ASMARM_HARDWARE_IOMD_H #define __ASMARM_HARDWARE_IOMD_H -#include <linux/config.h> #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 5f10048ec54..22dfb173776 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -111,6 +111,8 @@ #define LOCOMO_ALS 0x00 /* Adjust light cycle */ #define LOCOMO_ALD 0x04 /* Adjust light duty */ +#define LOCOMO_ALC_EN 0x8000 + /* Backlight controller: TFT signal */ #define LOCOMO_BACKLIGHT 0x38 #define LOCOMO_TC 0x00 /* TFT control signal */ @@ -203,4 +205,7 @@ void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); +/* Frontlight control */ +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); + #endif diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h index 36983e5f366..ecf15b83956 100644 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -16,6 +16,7 @@ struct sharpsl_charger_machinfo { void (*exit)(void); int gpio_acin; int gpio_batfull; + int batfull_irq; int gpio_batlock; int gpio_fatal; void (*discharge)(int); @@ -34,9 +35,19 @@ struct sharpsl_charger_machinfo { #define SHARPSL_STATUS_FATAL 7 unsigned long (*charger_wakeup)(void); int (*should_wakeup)(unsigned int resume_on_alarm); + void (*backlight_limit)(int); + int (*backlight_get_status) (void); + int charge_on_volt; + int charge_on_temp; + int charge_acin_high; + int charge_acin_low; + int fatal_acin_volt; + int fatal_noacin_volt; int bat_levels; struct battery_thresh *bat_levels_noac; struct battery_thresh *bat_levels_acin; + struct battery_thresh *bat_levels_noac_bl; + struct battery_thresh *bat_levels_acin_bl; int status_high_acin; int status_low_acin; int status_high_noac; diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h index 60b5105c9c9..66e67e60bc5 100644 --- a/include/asm-arm/irq.h +++ b/include/asm-arm/irq.h @@ -47,10 +47,6 @@ void disable_irq_wake(unsigned int irq); void enable_irq_wake(unsigned int irq); int setup_irq(unsigned int, struct irqaction *); -struct irqaction; -struct pt_regs; -int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *); - extern void migrate_irqs(void); #endif diff --git a/include/asm-arm/leds.h b/include/asm-arm/leds.h index 88ce4124f85..12290ea5580 100644 --- a/include/asm-arm/leds.h +++ b/include/asm-arm/leds.h @@ -13,7 +13,6 @@ #ifndef ASM_ARM_LEDS_H #define ASM_ARM_LEDS_H -#include <linux/config.h> typedef enum { led_idle_start, diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h index e8ea67c97c7..cef5364ed5f 100644 --- a/include/asm-arm/mach/map.h +++ b/include/asm-arm/mach/map.h @@ -16,8 +16,6 @@ struct map_desc { unsigned int type; }; -struct meminfo; - #define MT_DEVICE 0 #define MT_CACHECLEAN 1 #define MT_MINICLEAN 2 @@ -28,7 +26,8 @@ struct meminfo; #define MT_IXP2000_DEVICE 7 #define MT_NONSHARED_DEVICE 8 -extern void create_memmap_holes(struct meminfo *); -extern void memtable_init(struct meminfo *); +#ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); -extern void setup_io_desc(void); +#else +#define iotable_init(map,num) do { } while (0) +#endif diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index 25d540ed007..923e0ca6620 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -28,7 +28,7 @@ struct hw_pci { struct pci_sys_data { struct list_head node; int busnr; /* primary bus number */ - unsigned long mem_offset; /* bus->cpu memory mapping offset */ + u64 mem_offset; /* bus->cpu memory mapping offset */ unsigned long io_offset; /* bus->cpu IO mapping offset */ struct pci_bus *bus; /* PCI bus */ struct resource *resource[3]; /* Primary PCI bus resources */ diff --git a/include/asm-arm/mach/serial_at91rm9200.h b/include/asm-arm/mach/serial_at91.h index 98f4b0cb883..1290bb32802 100644 --- a/include/asm-arm/mach/serial_at91rm9200.h +++ b/include/asm-arm/mach/serial_at91.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/serial_at91rm9200.h + * linux/include/asm-arm/mach/serial_at91.h * * Based on serial_sa1100.h by Nicolas Pitre * @@ -7,7 +7,6 @@ * * Low level machine dependent UART functions. */ -#include <linux/config.h> struct uart_port; @@ -15,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91rm9200_port_fns { +struct at91_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -26,11 +25,9 @@ struct at91rm9200_port_fns { }; #if defined(CONFIG_SERIAL_AT91) -void at91_register_uart_fns(struct at91rm9200_port_fns *fns); -void at91_register_uart(int idx, int port); +void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) -#define at91_register_uart(idx,port) do { } while (0) #endif diff --git a/include/asm-arm/mach/serial_sa1100.h b/include/asm-arm/mach/serial_sa1100.h index 9162018585d..20c22bb218d 100644 --- a/include/asm-arm/mach/serial_sa1100.h +++ b/include/asm-arm/mach/serial_sa1100.h @@ -7,7 +7,6 @@ * * Low level machine dependent UART functions. */ -#include <linux/config.h> struct uart_port; struct uart_info; diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index 96c6db7dd0e..9f28073559e 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -50,6 +50,7 @@ struct sys_timer { #define DYN_TICK_ENABLED (1 << 1) struct dyn_tick_timer { + spinlock_t lock; unsigned int state; /* Current state */ int (*enable)(void); /* Enables dynamic tick */ int (*disable)(void); /* Disables dynamic tick */ diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index 20928940759..94f973b704f 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -2,6 +2,7 @@ * linux/include/asm-arm/memory.h * * Copyright (C) 2000-2002 Russell King + * modification for nommu, Hyok S. Choi, 2004 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,11 +23,12 @@ #define UL(x) (x) #endif -#include <linux/config.h> #include <linux/compiler.h> #include <asm/arch/memory.h> #include <asm/sizes.h> +#ifdef CONFIG_MMU + #ifndef TASK_SIZE /* * TASK_SIZE - the maximum size of a user space task. @@ -49,6 +51,60 @@ #endif /* + * The module space lives between the addresses given by TASK_SIZE + * and PAGE_OFFSET - it must be within 32MB of the kernel text. + */ +#define MODULE_END (PAGE_OFFSET) +#define MODULE_START (MODULE_END - 16*1048576) + +#if TASK_SIZE > MODULE_START +#error Top of user space clashes with start of module space +#endif + +/* + * The XIP kernel gets mapped at the bottom of the module vm area. + * Since we use sections to map it, this macro replaces the physical address + * with its virtual address while keeping offset from the base section. + */ +#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) + +#else /* CONFIG_MMU */ + +/* + * The limitation of user task size can grow up to the end of free ram region. + * It is difficult to define and perhaps will never meet the original meaning + * of this define that was meant to. + * Fortunately, there is no reference for this in noMMU mode, for now. + */ +#ifndef TASK_SIZE +#define TASK_SIZE (CONFIG_DRAM_SIZE) +#endif + +#ifndef TASK_UNMAPPED_BASE +#define TASK_UNMAPPED_BASE UL(0x00000000) +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET (CONFIG_DRAM_BASE) +#endif + +#ifndef END_MEM +#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE) +#endif + +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (PHYS_OFFSET) +#endif + +/* + * The module can be at any place in ram in nommu mode. + */ +#define MODULE_END (END_MEM) +#define MODULE_START (PHYS_OFFSET) + +#endif /* !CONFIG_MMU */ + +/* * Size of DMA-consistent memory region. Must be multiple of 2M, * between 2MB and 14MB inclusive. */ @@ -72,24 +128,6 @@ #define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) #define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) -/* - * The module space lives between the addresses given by TASK_SIZE - * and PAGE_OFFSET - it must be within 32MB of the kernel text. - */ -#define MODULE_END (PAGE_OFFSET) -#define MODULE_START (MODULE_END - 16*1048576) - -#if TASK_SIZE > MODULE_START -#error Top of user space clashes with start of module space -#endif - -/* - * The XIP kernel gets mapped at the bottom of the module vm area. - * Since we use sections to map it, this macro replaces the physical address - * with its virtual address while keeping offset from the base section. - */ -#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) - #ifndef __ASSEMBLY__ /* diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h index a457cb71984..23dde52e094 100644 --- a/include/asm-arm/mmu.h +++ b/include/asm-arm/mmu.h @@ -1,6 +1,8 @@ #ifndef __ARM_MMU_H #define __ARM_MMU_H +#ifdef CONFIG_MMU + typedef struct { #if __LINUX_ARM_ARCH__ >= 6 unsigned int id; @@ -13,4 +15,18 @@ typedef struct { #define ASID(mm) (0) #endif +#else + +/* + * From nommu.h: + * Copyright (C) 2002, David McCullough <davidm@snapgear.com> + * modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com> + */ +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +} mm_context_t; + +#endif + #endif diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 81c59facea3..9fadb01e030 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -82,6 +82,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { +#ifdef CONFIG_MMU unsigned int cpu = smp_processor_id(); if (prev != next) { @@ -91,6 +92,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, if (cache_is_vivt()) cpu_clear(cpu, prev->cpu_vm_mask); } +#endif } #define deactivate_mm(tsk,mm) do { } while (0) diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h new file mode 100644 index 00000000000..a1bcad06048 --- /dev/null +++ b/include/asm-arm/page-nommu.h @@ -0,0 +1,51 @@ +/* + * linux/include/asm-arm/page-nommu.h + * + * Copyright (C) 2004 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PAGE_NOMMU_H +#define _ASMARM_PAGE_NOMMU_H + +#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13 +#define KTHREAD_SIZE (8192) +#else +#define KTHREAD_SIZE PAGE_SIZE +#endif + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t[2]; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index a404d2bf0c6..63d12f0244c 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -10,7 +10,6 @@ #ifndef _ASMARM_PAGE_H #define _ASMARM_PAGE_H -#include <linux/config.h> /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 @@ -24,6 +23,12 @@ #ifndef __ASSEMBLY__ +#ifndef CONFIG_MMU + +#include "page-nommu.h" + +#else + #include <asm/glue.h> /* @@ -172,6 +177,8 @@ typedef unsigned long pgprot_t; /* the upper-most page table pointer */ extern pmd_t *top_pmd; +#endif /* CONFIG_MMU */ + #include <asm/memory.h> #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h index ead3ced38cb..f21abd4ddac 100644 --- a/include/asm-arm/pci.h +++ b/include/asm-arm/pci.h @@ -2,7 +2,6 @@ #define ASMARM_PCI_H #ifdef __KERNEL__ -#include <linux/config.h> #include <asm-generic/pci-dma-compat.h> #include <asm/hardware.h> /* for PCIBIOS_MIN_* */ diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h index c4ac2e67768..4d439455291 100644 --- a/include/asm-arm/pgalloc.h +++ b/include/asm-arm/pgalloc.h @@ -16,6 +16,10 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> +#define check_pgt_cache() do { } while (0) + +#ifdef CONFIG_MMU + #define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) #define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) @@ -32,8 +36,6 @@ extern void free_pgd_slow(pgd_t *pgd); #define pgd_alloc(mm) get_pgd_slow(mm) #define pgd_free(pgd) free_pgd_slow(pgd) -#define check_pgt_cache() do { } while (0) - /* * Allocate one PTE table. * @@ -126,4 +128,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep) __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); } +#endif /* CONFIG_MMU */ + #endif diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h new file mode 100644 index 00000000000..b13322dccf4 --- /dev/null +++ b/include/asm-arm/pgtable-nommu.h @@ -0,0 +1,123 @@ +/* + * linux/include/asm-arm/pgtable-nommu.h + * + * Copyright (C) 1995-2002 Russell King + * Copyright (C) 2004 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_NOMMU_H +#define _ASMARM_PGTABLE_NOMMU_H + +#ifndef __ASSEMBLY__ + +#include <linux/config.h> +#include <linux/slab.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/io.h> + +/* + * Trivial page table functions. + */ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) +/* FIXME */ +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PGDIR_SHIFT 21 + +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +/* FIXME */ + +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) + +//extern void paging_init(struct meminfo *, struct machine_desc *); +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + + +typedef pte_t *pte_addr_t; + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +/* + * Mark the prot value as uncacheable and unbufferable. + */ +#define pgprot_noncached(prot) __pgprot(0) +#define pgprot_writecombine(prot) __pgprot(0) + + +/* + * These would be in other places but having them here reduces the diffs. + */ +extern unsigned int kobjsize(const void *objp); +extern int is_in_rom(unsigned long); + +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) +#define io_remap_page_range remap_page_range +#define io_remap_pfn_range remap_pfn_range + +#define MK_IOSPACE_PFN(space, pfn) (pfn) +#define GET_IOSPACE(pfn) 0 +#define GET_PFN(pfn) (pfn) + + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#define FIRST_USER_ADDRESS (0) + +#else + +/* + * dummy tlb and user structures. + */ +#define v3_tlb_fns (0) +#define v4_tlb_fns (0) +#define v4wb_tlb_fns (0) +#define v4wbi_tlb_fns (0) +#define v6_tlb_fns (0) + +#define v3_user_fns (0) +#define v4_user_fns (0) +#define v4_mc_user_fns (0) +#define v4wb_user_fns (0) +#define v4wt_user_fns (0) +#define v6_user_fns (0) +#define xscale_mc_user_fns (0) + +#endif /*__ASSEMBLY__*/ + +#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index e85c08d78dd..8d3919c6458 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -11,9 +11,15 @@ #define _ASMARM_PGTABLE_H #include <asm-generic/4level-fixup.h> +#include <asm/proc-fns.h> + +#ifndef CONFIG_MMU + +#include "pgtable-nommu.h" + +#else #include <asm/memory.h> -#include <asm/proc-fns.h> #include <asm/arch/vmalloc.h> /* @@ -378,4 +384,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; #endif /* !__ASSEMBLY__ */ +#endif /* CONFIG_MMU */ + #endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 106045edb86..1bde92cdaeb 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -13,7 +13,6 @@ #ifdef __KERNEL__ -#include <linux/config.h> /* * Work out if we need multiple CPU support @@ -166,6 +165,8 @@ #include <asm/memory.h> +#ifdef CONFIG_MMU + #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm) #define cpu_get_pgd() \ @@ -177,6 +178,8 @@ (pgd_t *)phys_to_virt(pg); \ }) +#endif + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_PROCFNS_H */ diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h index 77adb7fa169..5a8ef787dbf 100644 --- a/include/asm-arm/ptrace.h +++ b/include/asm-arm/ptrace.h @@ -10,7 +10,6 @@ #ifndef __ASM_ARM_PTRACE_H #define __ASM_ARM_PTRACE_H -#include <linux/config.h> #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 @@ -26,6 +25,11 @@ #define PTRACE_SET_SYSCALL 23 +/* PTRACE_SYSCALL is 24 */ + +#define PTRACE_GETCRUNCHREGS 25 +#define PTRACE_SETCRUNCHREGS 26 + /* * PSR bits */ diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index fe45f7f6122..f67acce387e 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -10,7 +10,6 @@ #ifndef __ASM_ARM_SMP_H #define __ASM_ARM_SMP_H -#include <linux/config.h> #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/thread_info.h> diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 7c9568d3030..6001febfe63 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -3,7 +3,6 @@ #ifdef __KERNEL__ -#include <linux/config.h> #define CPU_ARCH_UNKNOWN 0 #define CPU_ARCH_ARMv3 1 @@ -108,6 +107,9 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +void arm_machine_restart(char mode); +extern void (*arm_pm_restart)(char str); + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index cfbccb63c67..c46b5c84275 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -59,6 +59,7 @@ struct thread_info { struct cpu_context_save cpu_context; /* cpu context */ __u8 used_cp[16]; /* thread used copro */ unsigned long tp_value; + struct crunch_state crunchstate; union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; struct restart_block restart_block; @@ -101,6 +102,11 @@ extern void free_thread_info(struct thread_info *); #define thread_saved_fp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) +extern void crunch_task_disable(struct thread_info *); +extern void crunch_task_copy(struct thread_info *, void *); +extern void crunch_task_restore(struct thread_info *, void *); +extern void crunch_task_release(struct thread_info *); + extern void iwmmxt_task_disable(struct thread_info *); extern void iwmmxt_task_copy(struct thread_info *, void *); extern void iwmmxt_task_restore(struct thread_info *, void *); diff --git a/include/asm-arm/thread_notify.h b/include/asm-arm/thread_notify.h new file mode 100644 index 00000000000..8866e521684 --- /dev/null +++ b/include/asm-arm/thread_notify.h @@ -0,0 +1,48 @@ +/* + * linux/include/asm-arm/thread_notify.h + * + * Copyright (C) 2006 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_THREAD_NOTIFY_H +#define ASMARM_THREAD_NOTIFY_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include <linux/notifier.h> +#include <asm/thread_info.h> + +static inline int thread_register_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + return atomic_notifier_chain_register(&thread_notify_head, n); +} + +static inline void thread_unregister_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_chain_unregister(&thread_notify_head, n); +} + +static inline void thread_notify(unsigned long rc, struct thread_info *thread) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_call_chain(&thread_notify_head, rc, thread); +} + +#endif + +/* + * These are the reason codes for the thread notifier. + */ +#define THREAD_NOTIFY_FLUSH 0 +#define THREAD_NOTIFY_RELEASE 1 +#define THREAD_NOTIFY_SWITCH 2 + +#endif +#endif diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index 728992451dd..d97fc76189a 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -10,7 +10,6 @@ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H -#include <linux/config.h> #ifndef CONFIG_MMU diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h index 064f0f5e8e2..87aba57a66c 100644 --- a/include/asm-arm/uaccess.h +++ b/include/asm-arm/uaccess.h @@ -41,15 +41,24 @@ struct exception_table_entry extern int fixup_exception(struct pt_regs *regs); /* + * These two are intentionally not defined anywhere - if the kernel + * code generates any references to them, that's a bug. + */ +extern int __get_user_bad(void); +extern int __put_user_bad(void); + +/* * Note that this is actually 0x1,0000,0000 */ #define KERNEL_DS 0x00000000 -#define USER_DS TASK_SIZE - #define get_ds() (KERNEL_DS) + +#ifdef CONFIG_MMU + +#define USER_DS TASK_SIZE #define get_fs() (current_thread_info()->addr_limit) -static inline void set_fs (mm_segment_t fs) +static inline void set_fs(mm_segment_t fs) { current_thread_info()->addr_limit = fs; modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); @@ -75,8 +84,6 @@ static inline void set_fs (mm_segment_t fs) : "cc"); \ flag; }) -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) - /* * Single-value transfer routines. They automatically use the right * size if we just have the right pointer type. Note that the functions @@ -87,20 +94,10 @@ static inline void set_fs (mm_segment_t fs) * fixup code, but there are a few places where it intrudes on the * main code path. When we only write to user space, there is no * problem. - * - * The "__xxx" versions of the user access functions do not verify the - * address space - it must have been done previously with a separate - * "access_ok()" call. - * - * The "xxx_error" versions set the third argument to EFAULT if an - * error occurs, and leave it unchanged on success. Note that these - * versions are void (ie, don't return a value as such). */ - extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -extern int __get_user_bad(void); #define __get_user_x(__r2,__p,__e,__s,__i...) \ __asm__ __volatile__ ( \ @@ -131,6 +128,74 @@ extern int __get_user_bad(void); __e; \ }) +extern int __put_user_1(void *, unsigned int); +extern int __put_user_2(void *, unsigned int); +extern int __put_user_4(void *, unsigned int); +extern int __put_user_8(void *, unsigned long long); + +#define __put_user_x(__r2,__p,__e,__s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r2") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r2) \ + : "ip", "lr", "cc") + +#define put_user(x,p) \ + ({ \ + const register typeof(*(p)) __r2 asm("r2") = (x); \ + const register typeof(*(p)) __user *__p asm("r0") = (p);\ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __put_user_x(__r2, __p, __e, 1); \ + break; \ + case 2: \ + __put_user_x(__r2, __p, __e, 2); \ + break; \ + case 4: \ + __put_user_x(__r2, __p, __e, 4); \ + break; \ + case 8: \ + __put_user_x(__r2, __p, __e, 8); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) + +#else /* CONFIG_MMU */ + +/* + * uClinux has only one addr space, so has simplified address limits. + */ +#define USER_DS KERNEL_DS + +#define segment_eq(a,b) (1) +#define __addr_ok(addr) (1) +#define __range_ok(addr,size) (0) +#define get_fs() (KERNEL_DS) + +static inline void set_fs(mm_segment_t fs) +{ +} + +#define get_user(x,p) __get_user(x,p) +#define put_user(x,p) __put_user(x,p) + +#endif /* CONFIG_MMU */ + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) + +/* + * The "__xxx" versions of the user access functions do not verify the + * address space - it must have been done previously with a separate + * "access_ok()" call. + * + * The "xxx_error" versions set the third argument to EFAULT if an + * error occurs, and leave it unchanged on success. Note that these + * versions are void (ie, don't return a value as such). + */ #define __get_user(x,ptr) \ ({ \ long __gu_err = 0; \ @@ -212,43 +277,6 @@ do { \ : "r" (addr), "i" (-EFAULT) \ : "cc") -extern int __put_user_1(void *, unsigned int); -extern int __put_user_2(void *, unsigned int); -extern int __put_user_4(void *, unsigned int); -extern int __put_user_8(void *, unsigned long long); -extern int __put_user_bad(void); - -#define __put_user_x(__r2,__p,__e,__s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ - : "ip", "lr", "cc") - -#define put_user(x,p) \ - ({ \ - const register typeof(*(p)) __r2 asm("r2") = (x); \ - const register typeof(*(p)) __user *__p asm("r0") = (p);\ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - __e; \ - }) - #define __put_user(x,ptr) \ ({ \ long __pu_err = 0; \ @@ -353,66 +381,54 @@ do { \ : "r" (x), "i" (-EFAULT) \ : "cc") -extern unsigned long __arch_copy_from_user(void *to, const void __user *from, unsigned long n); -extern unsigned long __arch_copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __arch_clear_user(void __user *addr, unsigned long n); -extern unsigned long __arch_strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __arch_strnlen_user(const char __user *s, long n); + +#ifdef CONFIG_MMU +extern unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n); +extern unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __clear_user(void __user *addr, unsigned long n); +#else +#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) +#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) +#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) +#endif + +extern unsigned long __strncpy_from_user(char *to, const char __user *from, unsigned long count); +extern unsigned long __strnlen_user(const char __user *s, long n); static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_READ, from, n)) - n = __arch_copy_from_user(to, from, n); + n = __copy_from_user(to, from, n); else /* security hole - plug it */ memzero(to, n); return n; } -static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __arch_copy_from_user(to, from, n); -} - static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) { if (access_ok(VERIFY_WRITE, to, n)) - n = __arch_copy_to_user(to, from, n); + n = __copy_to_user(to, from, n); return n; } -static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __arch_copy_to_user(to, from, n); -} - #define __copy_to_user_inatomic __copy_to_user #define __copy_from_user_inatomic __copy_from_user -static inline unsigned long clear_user (void __user *to, unsigned long n) +static inline unsigned long clear_user(void __user *to, unsigned long n) { if (access_ok(VERIFY_WRITE, to, n)) - n = __arch_clear_user(to, n); + n = __clear_user(to, n); return n; } -static inline unsigned long __clear_user (void __user *to, unsigned long n) -{ - return __arch_clear_user(to, n); -} - -static inline long strncpy_from_user (char *dst, const char __user *src, long count) +static inline long strncpy_from_user(char *dst, const char __user *src, long count) { long res = -EFAULT; if (access_ok(VERIFY_READ, src, 1)) - res = __arch_strncpy_from_user(dst, src, count); + res = __strncpy_from_user(dst, src, count); return res; } -static inline long __strncpy_from_user (char *dst, const char __user *src, long count) -{ - return __arch_strncpy_from_user(dst, src, count); -} - #define strlen_user(s) strnlen_user(s, ~0UL >> 1) static inline long strnlen_user(const char __user *s, long n) @@ -420,7 +436,7 @@ static inline long strnlen_user(const char __user *s, long n) unsigned long res = 0; if (__addr_ok(s)) - res = __arch_strnlen_user(s, n); + res = __strnlen_user(s, n); return res; } diff --git a/include/asm-arm/ucontext.h b/include/asm-arm/ucontext.h index f853130137c..bf65e9f4525 100644 --- a/include/asm-arm/ucontext.h +++ b/include/asm-arm/ucontext.h @@ -1,12 +1,103 @@ #ifndef _ASMARM_UCONTEXT_H #define _ASMARM_UCONTEXT_H +#include <asm/fpstate.h> + +/* + * struct sigcontext only has room for the basic registers, but struct + * ucontext now has room for all registers which need to be saved and + * restored. Coprocessor registers are stored in uc_regspace. Each + * coprocessor's saved state should start with a documented 32-bit magic + * number, followed by a 32-bit word giving the coproccesor's saved size. + * uc_regspace may be expanded if necessary, although this takes some + * coordination with glibc. + */ + struct ucontext { unsigned long uc_flags; struct ucontext *uc_link; stack_t uc_stack; struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ + sigset_t uc_sigmask; + /* Allow for uc_sigmask growth. Glibc uses a 1024-bit sigset_t. */ + int __unused[32 - (sizeof (sigset_t) / sizeof (int))]; + /* Last for extensibility. Eight byte aligned because some + coprocessors require eight byte alignment. */ + unsigned long uc_regspace[128] __attribute__((__aligned__(8))); }; +#ifdef __KERNEL__ + +/* + * Coprocessor save state. The magic values and specific + * coprocessor's layouts are part of the userspace ABI. Each one of + * these should be a multiple of eight bytes and aligned to eight + * bytes, to prevent unpredictable padding in the signal frame. + */ + +#ifdef CONFIG_CRUNCH +#define CRUNCH_MAGIC 0x5065cf03 +#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8) + +struct crunch_sigframe { + unsigned long magic; + unsigned long size; + struct crunch_state storage; +} __attribute__((__aligned__(8))); +#endif + +#ifdef CONFIG_IWMMXT +/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +#define IWMMXT_MAGIC 0x12ef842a +#define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) + +struct iwmmxt_sigframe { + unsigned long magic; + unsigned long size; + struct iwmmxt_struct storage; +} __attribute__((__aligned__(8))); +#endif /* CONFIG_IWMMXT */ + +#ifdef CONFIG_VFP +#if __LINUX_ARM_ARCH__ < 6 +/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra + * word after the registers, and a word of padding at the end for + * alignment. */ +#define VFP_MAGIC 0x56465001 +#define VFP_STORAGE_SIZE 152 +#else +#define VFP_MAGIC 0x56465002 +#define VFP_STORAGE_SIZE 144 +#endif + +struct vfp_sigframe +{ + unsigned long magic; + unsigned long size; + union vfp_state storage; +}; +#endif /* CONFIG_VFP */ + +/* + * Auxiliary signal frame. This saves stuff like FP state. + * The layout of this structure is not part of the user ABI, + * because the config options aren't. uc_regspace is really + * one of these. + */ +struct aux_sigframe { +#ifdef CONFIG_CRUNCH + struct crunch_sigframe crunch; +#endif +#ifdef CONFIG_IWMMXT + struct iwmmxt_sigframe iwmmxt; +#endif +#if 0 && defined CONFIG_VFP /* Not yet saved. */ + struct vfp_sigframe vfp; +#endif + /* Something that isn't a valid magic number for any coprocessor. */ + unsigned long end_magic; +} __attribute__((__aligned__(8))); + +#endif + #endif /* !_ASMARM_UCONTEXT_H */ diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index cbf39a56dbe..1e891f860ef 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_UNISTD_H #define __ASM_ARM_UNISTD_H -#include <linux/linkage.h> - #define __NR_OABI_SYSCALL_BASE 0x900000 #if defined(__thumb__) || defined(__ARM_EABI__) @@ -378,6 +376,9 @@ #undef __NR_ipc #endif +#ifdef __KERNEL__ +#include <linux/linkage.h> + #define __sys2(x) #x #define __sys1(x) __sys2(x) @@ -526,7 +527,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 __syscall_return(type,__res); \ } -#ifdef __KERNEL__ #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME @@ -547,7 +547,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_SYS_SOCKETCALL #endif -#endif #ifdef __KERNEL_SYSCALLS__ @@ -571,7 +570,7 @@ asmlinkage long sys_rt_sigaction(int sig, struct sigaction __user *oact, size_t sigsetsize); -#endif +#endif /* __KERNEL_SYSCALLS__ */ /* * "Conditional" syscalls @@ -581,4 +580,5 @@ asmlinkage long sys_rt_sigaction(int sig, */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h index 926e5ee128e..1e0b913c3d7 100644 --- a/include/asm-arm/vga.h +++ b/include/asm-arm/vga.h @@ -4,7 +4,7 @@ #include <asm/hardware.h> #include <asm/io.h> -#define VGA_MAP_MEM(x) (PCIMEM_BASE + (x)) +#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) #define vga_readb(x) (*((volatile unsigned char *)x)) #define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) |