Manual merge with Linus.

Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c

1 files changed, 281 insertions, 0 deletions

diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
new file mode 100644
index 00000000000..e82612cd9f3
--- /dev/null
+++ b/include/asm-sparc64/tsb.h
@@ -0,0 +1,281 @@
+#ifndef _SPARC64_TSB_H
+#define _SPARC64_TSB_H
+
+/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
+ * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
+ * pointers into this table for 8K and 64K page sizes, and also a
+ * comparison TAG based upon the virtual address and context which
+ * faults.
+ *
+ * TLB miss trap handler software does the actual lookup via something
+ * of the form:
+ *
+ * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
+ * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
+ *	sllx		%g6, 22, %g6
+ *	srlx		%g6, 22, %g6
+ * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
+ * 	cmp		%g4, %g6
+ * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
+ * 	 mov		FAULT_CODE_{D,I}TLB, %g3
+ * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
+ * 	retry
+ *
+ *
+ * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
+ * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
+ * register which is:
+ *
+ * -------------------------------------------------
+ * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
+ * -------------------------------------------------
+ *  63 61 60      48 47 42 41                     0
+ *
+ * But actually, since we use per-mm TSB's, we zero out the CONTEXT
+ * field.
+ *
+ * Like the powerpc hashtables we need to use locking in order to
+ * synchronize while we update the entries.  PTE updates need locking
+ * as well.
+ *
+ * We need to carefully choose a lock bits for the TSB entry.  We
+ * choose to use bit 47 in the tag.  Also, since we never map anything
+ * at page zero in context zero, we use zero as an invalid tag entry.
+ * When the lock bit is set, this forces a tag comparison failure.
+ */
+
+#define TSB_TAG_LOCK_BIT	47
+#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
+
+#define TSB_TAG_INVALID_BIT	46
+#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
+
+#define TSB_MEMBAR	membar	#StoreStore
+
+/* Some cpus support physical address quad loads.  We want to use
+ * those if possible so we don't need to hard-lock the TSB mapping
+ * into the TLB.  We encode some instruction patching in order to
+ * support this.
+ *
+ * The kernel TSB is locked into the TLB by virtue of being in the
+ * kernel image, so we don't play these games for swapper_tsb access.
+ */
+#ifndef __ASSEMBLY__
+struct tsb_ldquad_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	sun4u_insn;
+	unsigned int	sun4v_insn;
+};
+extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
+	__tsb_ldquad_phys_patch_end;
+
+struct tsb_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
+#endif
+#define TSB_LOAD_QUAD(TSB, REG)	\
+661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
+	.section	.tsb_ldquad_phys_patch, "ax"; \
+	.word		661b; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
+	.previous
+
+#define TSB_LOAD_TAG_HIGH(TSB, REG) \
+661:	lduwa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_LOAD_TAG(TSB, REG) \
+661:	ldxa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
+661:	casa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_CAS_TAG(TSB, REG1, REG2) \
+661:	casxa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_STORE(ADDR, VAL) \
+661:	stxa		VAL, [ADDR] ASI_N; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
+	.previous
+
+#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define TSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	TSB_STORE(TSB, TTE);     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	TSB_STORE(TSB, TAG);
+
+#define KTSB_LOAD_QUAD(TSB, REG) \
+	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
+
+#define KTSB_STORE(ADDR, VAL) \
+	stxa		VAL, [ADDR] ASI_N;
+
+#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	lduwa	[TSB] ASI_N, REG1;	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	casa	[TSB] ASI_N, REG1, REG2;\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define KTSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	stxa	TTE, [TSB] ASI_N;     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	stxa	TAG, [TSB] ASI_N;
+
+	/* Do a kernel page table walk.  Leaves physical PTE pointer in
+	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
+	 * VADDR will not be clobbered, but REG2 will.
+	 */
+#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
+	sethi		%hi(swapper_pg_dir), REG1; \
+	or		REG1, %lo(swapper_pg_dir), REG1; \
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduw		[REG1 + REG2], REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+	/* Do a user page table walk in MMU globals.  Leaves physical PTE
+	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
+	 * termination.  Physical base of page tables is in PHYS_PGD which
+	 * will not be modified.
+	 *
+	 * VADDR will not be clobbered, but REG1 and REG2 will.
+	 */
+#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
+ * If no entry is found, FAIL_LABEL will be branched to.  On success
+ * the resulting PTE value will be left in REG1.  VADDR is preserved
+ * by this routine.
+ */
+#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
+	sethi		%hi(prom_trans), REG1; \
+	or		REG1, %lo(prom_trans), REG1; \
+97:	ldx		[REG1 + 0x00], REG2; \
+	brz,pn		REG2, FAIL_LABEL; \
+	 nop; \
+	ldx		[REG1 + 0x08], REG3; \
+	add		REG2, REG3, REG3; \
+	cmp		REG2, VADDR; \
+	bgu,pt		%xcc, 98f; \
+	 cmp		VADDR, REG3; \
+	bgeu,pt		%xcc, 98f; \
+	 ldx		[REG1 + 0x10], REG3; \
+	sub		VADDR, REG2, REG2; \
+	ba,pt		%xcc, 99f; \
+	 add		REG3, REG2, REG1; \
+98:	ba,pt		%xcc, 97b; \
+	 add		REG1, (3 * 8), REG1; \
+99:
+
+	/* We use a 32K TSB for the whole kernel, this allows to
+	 * handle about 16MB of modules and vmalloc mappings without
+	 * incurring many hash conflicts.
+	 */
+#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
+#define KERNEL_TSB_NENTRIES	\
+	(KERNEL_TSB_SIZE_BYTES / 16)
+#define KERNEL_TSB4M_NENTRIES	4096
+
+	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
+	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
+	 * and the found TTE will be left in REG1.  REG3 and REG4 must
+	 * be an even/odd pair of registers.
+	 *
+	 * VADDR and TAG will be preserved and not clobbered by this macro.
+	 */
+#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_tsb), REG1; \
+	or		REG1, %lo(swapper_tsb), REG1; \
+	srlx		VADDR, PAGE_SHIFT, REG2; \
+	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+
+	/* This version uses a trick, the TAG is already (VADDR >> 22) so
+	 * we can make use of that for the index computation.
+	 */
+#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_4m_tsb), REG1; \
+	or		REG1, %lo(swapper_4m_tsb), REG1; \
+	and		TAG, (KERNEL_TSB_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+
+#endif /* !(_SPARC64_TSB_H) */