i386/x86_64: move headers to include/asm-x86

Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 163 insertions, 0 deletions

diff --git a/include/asm-x86/irqflags_32.h b/include/asm-x86/irqflags_32.h
new file mode 100644
index 00000000000..eff8585cb74
--- /dev/null
+++ b/include/asm-x86/irqflags_32.h
@@ -0,0 +1,163 @@
+/*
+ * include/asm-i386/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+#include <asm/processor-flags.h>
+
+#ifndef __ASSEMBLY__
+static inline unsigned long native_save_fl(void)
+{
+	unsigned long f;
+	asm volatile("pushfl ; popl %0":"=g" (f): /* no input */);
+	return f;
+}
+
+static inline void native_restore_fl(unsigned long f)
+{
+	asm volatile("pushl %0 ; popfl": /* no output */
+			     :"g" (f)
+			     :"memory", "cc");
+}
+
+static inline void native_irq_disable(void)
+{
+	asm volatile("cli": : :"memory");
+}
+
+static inline void native_irq_enable(void)
+{
+	asm volatile("sti": : :"memory");
+}
+
+static inline void native_safe_halt(void)
+{
+	asm volatile("sti; hlt": : :"memory");
+}
+
+static inline void native_halt(void)
+{
+	asm volatile("hlt": : :"memory");
+}
+#endif	/* __ASSEMBLY__ */
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	return native_save_fl();
+}
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	native_restore_fl(flags);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	native_irq_disable();
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	native_irq_enable();
+}
+
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline void raw_safe_halt(void)
+{
+	native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline void halt(void)
+{
+	native_halt();
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#else
+#define DISABLE_INTERRUPTS(clobbers)	cli
+#define ENABLE_INTERRUPTS(clobbers)	sti
+#define ENABLE_INTERRUPTS_SYSEXIT	sti; sysexit
+#define INTERRUPT_RETURN		iret
+#define GET_CR0_INTO_EAX		movl %cr0, %eax
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
+#ifndef __ASSEMBLY__
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & X86_EFLAGS_IF);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code. We call a
+ * C function, so save all the C-clobbered registers:
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+# define TRACE_IRQS_ON				\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_on;			\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+# define TRACE_IRQS_OFF				\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_off;		\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif