drm/intel: refactor DP i2c support and DP common header to drm helper

Both radeon and nouveau can re-use this code so move it up a level
so they can. However the hw interfaces for aux ch are different
enough that the code to translate from mode, address, bytes
to actual hw interfaces isn't generic, so move that code into the
Intel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 149 insertions, 0 deletions

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
new file mode 100644
index 00000000000..e49879ce95f
--- /dev/null
+++ b/include/drm/drm_dp_helper.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_HELPER_H_
+#define _DRM_DP_HELPER_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+#define	DP_LINK_BW_SET		0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+
+#define DP_LANE_COUNT_SET	0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	0x102
+
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       int mode, uint8_t write_byte,
+		       uint8_t *read_byte);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _DRM_DP_HELPER_H_ */