Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 0 insertions, 123 deletions

diff --git a/include/linux/istallion.h b/include/linux/istallion.h
deleted file mode 100644
index ad700a60c15..00000000000
--- a/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	istallion.h  -- stallion intelligent multiport serial driver.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_ISTALLION_H
-#define	_ISTALLION_H
-/*****************************************************************************/
-
-/*
- *	Define important driver constants here.
- */
-#define	STL_MAXBRDS		4
-#define	STL_MAXPANELS		4
-#define	STL_MAXPORTS		64
-#define	STL_MAXCHANS		(STL_MAXPORTS + 1)
-#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *	Define a set of structures to hold all the board/panel/port info
- *	for our ports. These will be dynamically allocated as required at
- *	driver initialization time.
- */
-
-/*
- *	Port and board structures to hold status info about each object.
- *	The board structure contains pointers to structures for each port
- *	connected to it. Panels are not distinguished here, since
- *	communication with the slave board will always be on a per port
- *	basis.
- */
-struct stliport {
-	unsigned long		magic;
-	struct tty_port		port;
-	unsigned int		portnr;
-	unsigned int		panelnr;
-	unsigned int		brdnr;
-	unsigned long		state;
-	unsigned int		devnr;
-	int			baud_base;
-	int			custom_divisor;
-	int			closing_wait;
-	int			rc;
-	int			argsize;
-	void			*argp;
-	unsigned int		rxmarkmsk;
-	wait_queue_head_t	raw_wait;
-	struct asysigs		asig;
-	unsigned long		addr;
-	unsigned long		rxoffset;
-	unsigned long		txoffset;
-	unsigned long		sigs;
-	unsigned long		pflag;
-	unsigned int		rxsize;
-	unsigned int		txsize;
-	unsigned char		reqbit;
-	unsigned char		portidx;
-	unsigned char		portbit;
-};
-
-/*
- *	Use a structure of function pointers to do board level operations.
- *	These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
-	unsigned long	magic;
-	unsigned int	brdnr;
-	unsigned int	brdtype;
-	unsigned long	state;
-	unsigned int	nrpanels;
-	unsigned int	nrports;
-	unsigned int	nrdevs;
-	unsigned int	iobase;
-	int		iosize;
-	unsigned long	memaddr;
-	void		__iomem *membase;
-	unsigned long	memsize;
-	int		pagesize;
-	int		hostoffset;
-	int		slaveoffset;
-	int		bitsize;
-	int		enabval;
-	unsigned int	panels[STL_MAXPANELS];
-	int		panelids[STL_MAXPANELS];
-	void		(*init)(struct stlibrd *brdp);
-	void		(*enable)(struct stlibrd *brdp);
-	void		(*reenable)(struct stlibrd *brdp);
-	void		(*disable)(struct stlibrd *brdp);
-	void		__iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
-	void		(*intr)(struct stlibrd *brdp);
-	void		(*reset)(struct stlibrd *brdp);
-	struct stliport	*ports[STL_MAXPORTS];
-};
-
-
-/*
- *	Define MAGIC numbers used for above structures.
- */
-#define	STLI_PORTMAGIC	0xe671c7a1
-#define	STLI_BOARDMAGIC	0x4bc6c825
-
-/*****************************************************************************/
-#endif