mg_disk: fold mg_disk.h into mg_disk.c

include/linux/mg_disk.h is used only by drivers/block/mg_disk.c.  No
reason to put it in a separate header.  Fold it into mg_disk.c.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 0 insertions, 206 deletions

diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h
deleted file mode 100644
index 1f76b1ebf62..00000000000
--- a/include/linux/mg_disk.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  include/linux/mg_disk.c
- *
- *  Support for the mGine m[g]flash IO mode.
- *  Based on legacy hd.c
- *
- * (c) 2008 mGine Co.,LTD
- * (c) 2008 unsik Kim <donari75@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __MG_DISK_H__
-#define __MG_DISK_H__
-
-#include <linux/blkdev.h>
-#include <linux/ata.h>
-
-/* name for block device */
-#define MG_DISK_NAME "mgd"
-/* name for platform device */
-#define MG_DEV_NAME "mg_disk"
-
-#define MG_DISK_MAJ 0
-#define MG_DISK_MAX_PART 16
-#define MG_SECTOR_SIZE 512
-#define MG_MAX_SECTS 256
-
-/* Register offsets */
-#define MG_BUFF_OFFSET			0x8000
-#define MG_STORAGE_BUFFER_SIZE		0x200
-#define MG_REG_OFFSET			0xC000
-#define MG_REG_FEATURE			(MG_REG_OFFSET + 2)	/* write case */
-#define MG_REG_ERROR			(MG_REG_OFFSET + 2)	/* read case */
-#define MG_REG_SECT_CNT			(MG_REG_OFFSET + 4)
-#define MG_REG_SECT_NUM			(MG_REG_OFFSET + 6)
-#define MG_REG_CYL_LOW			(MG_REG_OFFSET + 8)
-#define MG_REG_CYL_HIGH			(MG_REG_OFFSET + 0xA)
-#define MG_REG_DRV_HEAD			(MG_REG_OFFSET + 0xC)
-#define MG_REG_COMMAND			(MG_REG_OFFSET + 0xE)	/* write case */
-#define MG_REG_STATUS			(MG_REG_OFFSET + 0xE)	/* read  case */
-#define MG_REG_DRV_CTRL			(MG_REG_OFFSET + 0x10)
-#define MG_REG_BURST_CTRL		(MG_REG_OFFSET + 0x12)
-
-/* "Drive Select/Head Register" bit values */
-#define MG_REG_HEAD_MUST_BE_ON		0xA0 /* These 2 bits are always on */
-#define MG_REG_HEAD_DRIVE_MASTER	(0x00 | MG_REG_HEAD_MUST_BE_ON)
-#define MG_REG_HEAD_DRIVE_SLAVE		(0x10 | MG_REG_HEAD_MUST_BE_ON)
-#define MG_REG_HEAD_LBA_MODE		(0x40 | MG_REG_HEAD_MUST_BE_ON)
-
-
-/* "Device Control Register" bit values */
-#define MG_REG_CTRL_INTR_ENABLE			0x0
-#define MG_REG_CTRL_INTR_DISABLE		(0x1<<1)
-#define MG_REG_CTRL_RESET			(0x1<<2)
-#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH	0x0
-#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW	(0x1<<4)
-#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW		0x0
-#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH	(0x1<<5)
-#define MG_REG_CTRL_DPD_DISABLE			0x0
-#define MG_REG_CTRL_DPD_ENABLE			(0x1<<6)
-
-/* Status register bit */
-/* error bit in status register */
-#define MG_REG_STATUS_BIT_ERROR			0x01
-/* corrected error in status register */
-#define MG_REG_STATUS_BIT_CORRECTED_ERROR	0x04
-/* data request bit in status register */
-#define MG_REG_STATUS_BIT_DATA_REQ		0x08
-/* DSC - Drive Seek Complete */
-#define MG_REG_STATUS_BIT_SEEK_DONE		0x10
-/* DWF - Drive Write Fault */
-#define MG_REG_STATUS_BIT_WRITE_FAULT		0x20
-#define MG_REG_STATUS_BIT_READY			0x40
-#define MG_REG_STATUS_BIT_BUSY			0x80
-
-/* handy status */
-#define MG_STAT_READY	(MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE)
-#define MG_READY_OK(s)	(((s) & (MG_STAT_READY | \
-				(MG_REG_STATUS_BIT_BUSY | \
-				 MG_REG_STATUS_BIT_WRITE_FAULT | \
-				 MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY)
-
-/* Error register */
-#define MG_REG_ERR_AMNF		0x01
-#define MG_REG_ERR_ABRT		0x04
-#define MG_REG_ERR_IDNF		0x10
-#define MG_REG_ERR_UNC		0x40
-#define MG_REG_ERR_BBK		0x80
-
-/* error code for others */
-#define MG_ERR_NONE		0
-#define MG_ERR_TIMEOUT		0x100
-#define MG_ERR_INIT_STAT	0x101
-#define MG_ERR_TRANSLATION	0x102
-#define MG_ERR_CTRL_RST		0x103
-#define MG_ERR_INV_STAT		0x104
-#define MG_ERR_RSTOUT		0x105
-
-#define MG_MAX_ERRORS	6	/* Max read/write errors */
-
-/* command */
-#define MG_CMD_RD 0x20
-#define MG_CMD_WR 0x30
-#define MG_CMD_SLEEP 0x99
-#define MG_CMD_WAKEUP 0xC3
-#define MG_CMD_ID 0xEC
-#define MG_CMD_WR_CONF 0x3C
-#define MG_CMD_RD_CONF 0x40
-
-/* operation mode */
-#define MG_OP_CASCADE (1 << 0)
-#define MG_OP_CASCADE_SYNC_RD (1 << 1)
-#define MG_OP_CASCADE_SYNC_WR (1 << 2)
-#define MG_OP_INTERLEAVE (1 << 3)
-
-/* synchronous */
-#define MG_BURST_LAT_4 (3 << 4)
-#define MG_BURST_LAT_5 (4 << 4)
-#define MG_BURST_LAT_6 (5 << 4)
-#define MG_BURST_LAT_7 (6 << 4)
-#define MG_BURST_LAT_8 (7 << 4)
-#define MG_BURST_LEN_4 (1 << 1)
-#define MG_BURST_LEN_8 (2 << 1)
-#define MG_BURST_LEN_16 (3 << 1)
-#define MG_BURST_LEN_32 (4 << 1)
-#define MG_BURST_LEN_CONT (0 << 1)
-
-/* timeout value (unit: ms) */
-#define MG_TMAX_CONF_TO_CMD	1
-#define MG_TMAX_WAIT_RD_DRQ	10
-#define MG_TMAX_WAIT_WR_DRQ	500
-#define MG_TMAX_RST_TO_BUSY	10
-#define MG_TMAX_HDRST_TO_RDY	500
-#define MG_TMAX_SWRST_TO_RDY	500
-#define MG_TMAX_RSTOUT		3000
-
-/* device attribution */
-/* use mflash as boot device */
-#define MG_BOOT_DEV		(1 << 0)
-/* use mflash as storage device */
-#define MG_STORAGE_DEV		(1 << 1)
-/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
-#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
-
-#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
-
-/* names of GPIO resource */
-#define MG_RST_PIN	"mg_rst"
-/* except MG_BOOT_DEV, reset-out pin should be assigned */
-#define MG_RSTOUT_PIN	"mg_rstout"
-
-/* private driver data */
-struct mg_drv_data {
-	/* disk resource */
-	u32 use_polling;
-
-	/* device attribution */
-	u32 dev_attr;
-
-	/* internally used */
-	struct mg_host *host;
-};
-
-/* main structure for mflash driver */
-struct mg_host {
-	struct device *dev;
-
-	struct request_queue *breq;
-	spinlock_t lock;
-	struct gendisk *gd;
-
-	struct timer_list timer;
-	void (*mg_do_intr) (struct mg_host *);
-
-	u16 id[ATA_ID_WORDS];
-
-	u16 cyls;
-	u16 heads;
-	u16 sectors;
-	u32 n_sectors;
-	u32 nres_sectors;
-
-	void __iomem *dev_base;
-	unsigned int irq;
-	unsigned int rst;
-	unsigned int rstout;
-
-	u32 major;
-	u32 error;
-};
-
-/*
- * Debugging macro and defines
- */
-#undef DO_MG_DEBUG
-#ifdef DO_MG_DEBUG
-#  define MG_DBG(fmt, args...) \
-	printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
-#else /* CONFIG_MG_DEBUG */
-#  define MG_DBG(fmt, args...) do { } while (0)
-#endif /* CONFIG_MG_DEBUG */
-
-#endif