Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

4 files changed, 181 insertions, 1 deletions

diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
new file mode 100644
index 00000000000..ada401244e0
--- /dev/null
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -0,0 +1,47 @@
+/**
+ * dwc3-omap.h - OMAP Specific Glue layer, header.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+enum dwc3_omap_utmi_mode {
+	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+	DWC3_OMAP_UTMI_MODE_HW,
+	DWC3_OMAP_UTMI_MODE_SW,
+};
+
+struct dwc3_omap_data {
+	enum dwc3_omap_utmi_mode	utmi_mode;
+};
diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h
new file mode 100644
index 00000000000..39e038cca59
--- /dev/null
+++ b/include/linux/platform_data/exynos4_tmu.h
@@ -0,0 +1,83 @@
+/*
+ * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_EXYNOS4_TMU_H
+#define _LINUX_EXYNOS4_TMU_H
+
+enum calibration_type {
+	TYPE_ONE_POINT_TRIMMING,
+	TYPE_TWO_POINT_TRIMMING,
+	TYPE_NONE,
+};
+
+/**
+ * struct exynos4_tmu_platform_data
+ * @threshold: basic temperature for generating interrupt
+ *	       25 <= threshold <= 125 [unit: degree Celsius]
+ * @trigger_levels: array for each interrupt levels
+ *	[unit: degree Celsius]
+ *	0: temperature for trigger_level0 interrupt
+ *	   condition for trigger_level0 interrupt:
+ *		current temperature > threshold + trigger_levels[0]
+ *	1: temperature for trigger_level1 interrupt
+ *	   condition for trigger_level1 interrupt:
+ *		current temperature > threshold + trigger_levels[1]
+ *	2: temperature for trigger_level2 interrupt
+ *	   condition for trigger_level2 interrupt:
+ *		current temperature > threshold + trigger_levels[2]
+ *	3: temperature for trigger_level3 interrupt
+ *	   condition for trigger_level3 interrupt:
+ *		current temperature > threshold + trigger_levels[3]
+ * @trigger_level0_en:
+ *	1 = enable trigger_level0 interrupt,
+ *	0 = disable trigger_level0 interrupt
+ * @trigger_level1_en:
+ *	1 = enable trigger_level1 interrupt,
+ *	0 = disable trigger_level1 interrupt
+ * @trigger_level2_en:
+ *	1 = enable trigger_level2 interrupt,
+ *	0 = disable trigger_level2 interrupt
+ * @trigger_level3_en:
+ *	1 = enable trigger_level3 interrupt,
+ *	0 = disable trigger_level3 interrupt
+ * @gain: gain of amplifier in the positive-TC generator block
+ *	0 <= gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ *	in the positive-TC generator block
+ *	0 <= reference_voltage <= 31
+ * @cal_type: calibration type for temperature
+ *
+ * This structure is required for configuration of exynos4_tmu driver.
+ */
+struct exynos4_tmu_platform_data {
+	u8 threshold;
+	u8 trigger_levels[4];
+	bool trigger_level0_en;
+	bool trigger_level1_en;
+	bool trigger_level2_en;
+	bool trigger_level3_en;
+
+	u8 gain;
+	u8 reference_voltage;
+
+	enum calibration_type cal_type;
+};
+#endif /* _LINUX_EXYNOS4_TMU_H */
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
new file mode 100644
index 00000000000..e9d9149ddf3
--- /dev/null
+++ b/include/linux/platform_data/mv_usb.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MV_PLATFORM_USB_H
+#define __MV_PLATFORM_USB_H
+
+enum pxa_ehci_type {
+	EHCI_UNDEFINED = 0,
+	PXA_U2OEHCI,	/* pxa 168, 9xx */
+	PXA_SPH,	/* pxa 168, 9xx SPH */
+	MMP3_HSIC,	/* mmp3 hsic */
+	MMP3_FSIC,	/* mmp3 fsic */
+};
+
+enum {
+	MV_USB_MODE_OTG,
+	MV_USB_MODE_HOST,
+};
+
+enum {
+	VBUS_LOW	= 0,
+	VBUS_HIGH	= 1 << 0,
+};
+
+struct mv_usb_addon_irq {
+	unsigned int	irq;
+	int		(*poll)(void);
+};
+
+struct mv_usb_platform_data {
+	unsigned int		clknum;
+	char			**clkname;
+	struct mv_usb_addon_irq	*id;	/* Only valid for OTG. ID pin change*/
+	struct mv_usb_addon_irq	*vbus;	/* valid for OTG/UDC. VBUS change*/
+
+	/* only valid for HCD. OTG or Host only*/
+	unsigned int		mode;
+
+	int     (*phy_init)(unsigned int regbase);
+	void    (*phy_deinit)(unsigned int regbase);
+	int	(*set_vbus)(unsigned int vbus);
+};
+
+#endif
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index abd28621527..88734e871e3 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data {
 	 * read_uV()
 	 *
 	 * How to setup pullup_ohm, pulldown_ohm, and connect is
-	 * described at Documentation/hwmon/ntc
+	 * described at Documentation/hwmon/ntc_thermistor
 	 *
 	 * pullup/down_ohm: 0 for infinite / not-connected
 	 */