Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...

1 files changed, 0 insertions, 125 deletions

diff --git a/include/linux/timecompare.h b/include/linux/timecompare.h
deleted file mode 100644
index 546e2234e4b..00000000000
--- a/include/linux/timecompare.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Utility code which helps transforming between two different time
- * bases, called "source" and "target" time in this code.
- *
- * Source time has to be provided via the timecounter API while target
- * time is accessed via a function callback whose prototype
- * intentionally matches ktime_get() and ktime_get_real(). These
- * interfaces where chosen like this so that the code serves its
- * initial purpose without additional glue code.
- *
- * This purpose is synchronizing a hardware clock in a NIC with system
- * time, in order to implement the Precision Time Protocol (PTP,
- * IEEE1588) with more accurate hardware assisted time stamping.  In
- * that context only synchronization against system time (=
- * ktime_get_real()) is currently needed. But this utility code might
- * become useful in other situations, which is why it was written as
- * general purpose utility code.
- *
- * The source timecounter is assumed to return monotonically
- * increasing time (but this code does its best to compensate if that
- * is not the case) whereas target time may jump.
- *
- * The target time corresponding to a source time is determined by
- * reading target time, reading source time, reading target time
- * again, then assuming that average target time corresponds to source
- * time. In other words, the assumption is that reading the source
- * time is slow and involves equal time for sending the request and
- * receiving the reply, whereas reading target time is assumed to be
- * fast.
- *
- * Copyright (C) 2009 Intel Corporation.
- * Author: Patrick Ohly <patrick.ohly@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#ifndef _LINUX_TIMECOMPARE_H
-#define _LINUX_TIMECOMPARE_H
-
-#include <linux/clocksource.h>
-#include <linux/ktime.h>
-
-/**
- * struct timecompare - stores state and configuration for the two clocks
- *
- * Initialize to zero, then set source/target/num_samples.
- *
- * Transformation between source time and target time is done with:
- * target_time = source_time + offset +
- *               (source_time - last_update) * skew /
- *               TIMECOMPARE_SKEW_RESOLUTION
- *
- * @source:          used to get source time stamps via timecounter_read()
- * @target:          function returning target time (for example, ktime_get
- *                   for monotonic time, or ktime_get_real for wall clock)
- * @num_samples:     number of times that source time and target time are to
- *                   be compared when determining their offset
- * @offset:          (target time - source time) at the time of the last update
- * @skew:            average (target time - source time) / delta source time *
- *                   TIMECOMPARE_SKEW_RESOLUTION
- * @last_update:     last source time stamp when time offset was measured
- */
-struct timecompare {
-	struct timecounter *source;
-	ktime_t (*target)(void);
-	int num_samples;
-
-	s64 offset;
-	s64 skew;
-	u64 last_update;
-};
-
-/**
- * timecompare_transform - transform source time stamp into target time base
- * @sync:            context for time sync
- * @source_tstamp:   the result of timecounter_read() or
- *                   timecounter_cyc2time()
- */
-extern ktime_t timecompare_transform(struct timecompare *sync,
-				     u64 source_tstamp);
-
-/**
- * timecompare_offset - measure current (target time - source time) offset
- * @sync:            context for time sync
- * @offset:          average offset during sample period returned here
- * @source_tstamp:   average source time during sample period returned here
- *
- * Returns number of samples used. Might be zero (= no result) in the
- * unlikely case that target time was monotonically decreasing for all
- * samples (= broken).
- */
-extern int timecompare_offset(struct timecompare *sync,
-			      s64 *offset,
-			      u64 *source_tstamp);
-
-extern void __timecompare_update(struct timecompare *sync,
-				 u64 source_tstamp);
-
-/**
- * timecompare_update - update offset and skew by measuring current offset
- * @sync:            context for time sync
- * @source_tstamp:   the result of timecounter_read() or
- *                   timecounter_cyc2time(), pass zero to force update
- *
- * Updates are only done at most once per second.
- */
-static inline void timecompare_update(struct timecompare *sync,
-				      u64 source_tstamp)
-{
-	if (!source_tstamp ||
-	    (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC)
-		__timecompare_update(sync, source_tstamp);
-}
-
-#endif /* _LINUX_TIMECOMPARE_H */