Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h

1 files changed, 3 insertions, 106 deletions

diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe39ee..0a4487d3fb1 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
 /*
  *  User level driver support for input subsystem
  *
@@ -31,13 +29,11 @@
  *	0.1	20/06/2002
  *		- first public version
  */
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
 
-#include <linux/types.h>
-#include <linux/input.h>
-
-#define UINPUT_VERSION		3
+#include <uapi/linux/uinput.h>
 
-#ifdef __KERNEL__
 #define UINPUT_NAME		"uinput"
 #define UINPUT_BUFFER_SIZE	16
 #define UINPUT_NUM_REQUESTS	16
@@ -75,103 +71,4 @@ struct uinput_device {
 	wait_queue_head_t	requests_waitq;
 	spinlock_t		requests_lock;
 };
-#endif	/* __KERNEL__ */
-
-struct uinput_ff_upload {
-	__u32			request_id;
-	__s32			retval;
-	struct ff_effect	effect;
-	struct ff_effect	old;
-};
-
-struct uinput_ff_erase {
-	__u32			request_id;
-	__s32			retval;
-	__u32			effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE	'U'
-#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_upload struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- *      uinput_ff_upload struct. It will be filled in with the
- *      ff_effects passed to upload_effect().
- *   4. Perform the effect upload, and place a return code back into
-        the uinput_ff_upload struct.
- *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- *      uinput_ff_upload_effect struct. This will complete execution
- *      of our upload_effect() handler.
- *
- * To implement erase_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_erase struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- *      uinput_ff_erase struct. It will be filled in with the
- *      effect ID passed to erase_effect().
- *   4. Perform the effect erasure, and place a return code back
- *      into the uinput_ff_erase struct.
- *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- *      uinput_ff_erase_effect struct. This will complete execution
- *      of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT		0x0101
-#define UI_FF_UPLOAD		1
-#define UI_FF_ERASE		2
-
-#define UINPUT_MAX_NAME_SIZE	80
-struct uinput_user_dev {
-	char name[UINPUT_MAX_NAME_SIZE];
-	struct input_id id;
-	__u32 ff_effects_max;
-	__s32 absmax[ABS_CNT];
-	__s32 absmin[ABS_CNT];
-	__s32 absfuzz[ABS_CNT];
-	__s32 absflat[ABS_CNT];
-};
 #endif	/* __UINPUT_H_ */
-