Merge branch 'master' into for-upstream

Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile

7 files changed, 295 insertions, 4 deletions

diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index 42e84fc315e..54c446309a2 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -4,4 +4,5 @@ header-y += ch9.h
 header-y += gadgetfs.h
 header-y += midi.h
 header-y += g_printer.h
-
+header-y += tmc.h
+header-y += vstusb.h
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index ca228bb9421..18a729343ff 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -160,6 +160,15 @@ struct usb_cdc_mdlm_detail_desc {
 	__u8	bDetailData[0];
 } __attribute__ ((packed));
 
+/* "OBEX Control Model Functional Descriptor" */
+struct usb_cdc_obex_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdVersion;
+} __attribute__ ((packed));
+
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index c932390c6da..935c380ffe4 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -130,6 +130,9 @@ struct usb_function {
 
 int usb_add_function(struct usb_configuration *, struct usb_function *);
 
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
 int usb_interface_id(struct usb_configuration *, struct usb_function *);
 
 /**
@@ -316,9 +319,13 @@ struct usb_composite_dev {
 	struct usb_composite_driver	*driver;
 	u8				next_string_id;
 
-	spinlock_t			lock;
+	/* the gadget driver won't enable the data pullup
+	 * while the deactivation count is nonzero.
+	 */
+	unsigned			deactivations;
 
-	/* REVISIT use and existence of lock ... */
+	/* protects at least deactivation count */
+	spinlock_t			lock;
 };
 
 extern int usb_string_id(struct usb_composite_dev *c);
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 00000000000..5b88e36c910
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved [9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status [0];	/* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE		0x68		/* USB Device mode */
+#define USBMODE_SDIS	(1<<3)		/* Stream disable */
+#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
+#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
+#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 655341d0f53..0b8617a9176 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -192,7 +192,7 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * The driver.owner field should be set to the module owner of this driver.
  * The driver.name field should be set to the name of this driver (remember
  * it will show up in sysfs, so it needs to be short and to the point.
- * Useing the module name is a good idea.)
+ * Using the module name is a good idea.)
  */
 struct usb_serial_driver {
 	const char *description;
diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h
new file mode 100644
index 00000000000..c045ae12556
--- /dev/null
+++ b/include/linux/usb/tmc.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This file holds USB constants defined by the USB Device Class
+ * Definition for Test and Measurement devices published by the USB-IF.
+ *
+ * It also has the ioctl definitions for the usbtmc kernel driver that
+ * userspace needs to know about.
+ */
+
+#ifndef __LINUX_USB_TMC_H
+#define __LINUX_USB_TMC_H
+
+/* USB TMC status values */
+#define USBTMC_STATUS_SUCCESS				0x01
+#define USBTMC_STATUS_PENDING				0x02
+#define USBTMC_STATUS_FAILED				0x80
+#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS		0x81
+#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS		0x82
+#define USBTMC_STATUS_SPLIT_IN_PROGRESS			0x83
+
+/* USB TMC requests values */
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT		1
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS	2
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN		3
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS	4
+#define USBTMC_REQUEST_INITIATE_CLEAR			5
+#define USBTMC_REQUEST_CHECK_CLEAR_STATUS		6
+#define USBTMC_REQUEST_GET_CAPABILITIES			7
+#define USBTMC_REQUEST_INDICATOR_PULSE			64
+
+/* Request values for USBTMC driver's ioctl entry point */
+#define USBTMC_IOC_NR			91
+#define USBTMC_IOCTL_INDICATOR_PULSE	_IO(USBTMC_IOC_NR, 1)
+#define USBTMC_IOCTL_CLEAR		_IO(USBTMC_IOC_NR, 2)
+#define USBTMC_IOCTL_ABORT_BULK_OUT	_IO(USBTMC_IOC_NR, 3)
+#define USBTMC_IOCTL_ABORT_BULK_IN	_IO(USBTMC_IOC_NR, 4)
+#define USBTMC_IOCTL_CLEAR_OUT_HALT	_IO(USBTMC_IOC_NR, 6)
+#define USBTMC_IOCTL_CLEAR_IN_HALT	_IO(USBTMC_IOC_NR, 7)
+
+#endif
diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h
new file mode 100644
index 00000000000..1cfac67191f
--- /dev/null
+++ b/include/linux/usb/vstusb.h
@@ -0,0 +1,71 @@
+/*****************************************************************************
+ *  File: drivers/usb/misc/vstusb.h
+ *
+ *  Purpose: Support for the bulk USB Vernier Spectrophotometers
+ *
+ *  Author:     EQware Engineering, Inc.
+ *              Oregon City, OR, USA 97045
+ *
+ *  Copyright:  2007, 2008
+ *              Vernier Software & Technology
+ *              Beaverton, OR, USA 97005
+ *
+ *  Web:        www.vernier.com
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *****************************************************************************/
+/*****************************************************************************
+ *
+ *  The vstusb module is a standard usb 'client' driver running on top of the
+ *  standard usb host controller stack.
+ *
+ *  In general, vstusb supports standard bulk usb pipes.  It supports multiple
+ *  devices and multiple pipes per device.
+ *
+ *  The vstusb driver supports two interfaces:
+ *  1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg
+ *  	interface to any pipe with timeout support;
+ *  2 - standard read/write with ioctl config - offers standard read/write
+ *  	interface with ioctl configured pipes and timeouts.
+ *
+ *  Both interfaces can be signal from other process and will abort its i/o
+ *  operation.
+ *
+ *  A timeout of 0 means NO timeout.  The user can still terminate the read via
+ *  signal.
+ *
+ *  If using multiple threads with this driver, the user should ensure that
+ *  any reads, writes, or ioctls are complete before closing the device.
+ *  Changing read/write timeouts or pipes takes effect on next read/write.
+ *
+ *****************************************************************************/
+
+struct vstusb_args {
+	union {
+		/* this struct is used for IOCTL_VSTUSB_SEND_PIPE,	*
+		 * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops	*/
+		struct {
+			void __user	*buffer;
+			size_t          count;
+			unsigned int    timeout_ms;
+			int             pipe;
+		};
+
+		/* this one is used for IOCTL_VSTUSB_CONFIG_RW  	*/
+		struct {
+			int rd_pipe;
+			int rd_timeout_ms;
+			int wr_pipe;
+			int wr_timeout_ms;
+		};
+	};
+};
+
+#define VST_IOC_MAGIC 'L'
+#define VST_IOC_FIRST 0x20
+#define IOCTL_VSTUSB_SEND_PIPE	_IO(VST_IOC_MAGIC, VST_IOC_FIRST)
+#define IOCTL_VSTUSB_RECV_PIPE	_IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1)
+#define IOCTL_VSTUSB_CONFIG_RW	_IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2)