usb: phy: tegra: Tegra30 support

The Tegra30 USB PHY is a bit different than the Tegra20 PHY:

- The EHCI controller supports the HOSTPC register extension, and some
  of the fields that the PHY needs to modify (PHCD and PTS) have moved
  to the new HOSTPC register.
- Some of the UTMI PLL configuration registers have moved from the USB
  register space to the Clock-And-Reset controller space. In Tegra30
  the clock driver is responsible for configuring the UTMI PLL.
- The USBMODE register must be explicitly written to enter host mode.
- Certain PHY parameters need to be programmed for optimal signal
  quality. Support for this will be added in the next patch.

The new tegra_phy_soc_config structure is added to describe the
differences between the SoCs.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 19 insertions, 0 deletions

diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index d3db274610a..d3a63c354db 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -18,6 +18,24 @@
 #include <linux/clk.h>
 #include <linux/usb/otg.h>
 
+/*
+ * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers
+ *     should be set up by clk-tegra, false if by the PHY code
+ * has_hostpc: true if the USB controller has the HOSTPC extension, which
+ *     changes the location of the PHCD and PTS fields
+ * requires_usbmode_setup: true if the USBMODE register needs to be set to
+ *      enter host mode
+ * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level
+ *      and hsdiscon_level should be set for adequate signal quality
+ */
+
+struct tegra_phy_soc_config {
+	bool utmi_pll_config_in_car_module;
+	bool has_hostpc;
+	bool requires_usbmode_setup;
+	bool requires_extra_tuning_parameters;
+};
+
 struct tegra_utmip_config {
 	u8 hssync_start_delay;
 	u8 elastic_limit;
@@ -47,6 +65,7 @@ struct tegra_usb_phy {
 	struct regulator *vbus;
 	enum usb_dr_mode mode;
 	void *config;
+	const struct tegra_phy_soc_config *soc_config;
 	struct usb_phy *ulpi;
 	struct usb_phy u_phy;
 	bool is_legacy_phy;