Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...

8 files changed, 48 insertions, 91 deletions

diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index 54c446309a2..29fd73b0bff 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -5,4 +5,3 @@ header-y += gadgetfs.h
 header-y += midi.h
 header-y += g_printer.h
 header-y += tmc.h
-header-y += vstusb.h
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
index 6311fa2d9f8..baf41c8616e 100644
--- a/include/linux/usb/atmel_usba_udc.h
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -15,6 +15,7 @@ struct usba_ep_data {
 
 struct usba_platform_data {
 	int			vbus_pin;
+	int		 	vbus_pin_inverted;
 	int			num_ep;
 	struct usba_ep_data	ep[0];
 };
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 94012e649d8..e58369ff816 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -775,7 +775,7 @@ enum usb_device_speed {
 	USB_SPEED_UNKNOWN = 0,			/* enumerating */
 	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
 	USB_SPEED_HIGH,				/* usb 2.0 */
-	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
+	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
 	USB_SPEED_SUPER,			/* usb 3.0 */
 };
 
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 5dc2f227a0f..7acef0234c0 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -30,26 +30,26 @@ struct musb_hdrc_eps_bits {
 struct musb_hdrc_config {
 	/* MUSB configuration-specific details */
 	unsigned	multipoint:1;	/* multipoint device */
-	unsigned	dyn_fifo:1;	/* supports dynamic fifo sizing */
-	unsigned	soft_con:1;	/* soft connect required */
-	unsigned	utm_16:1;	/* utm data witdh is 16 bits */
+	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+	unsigned	soft_con:1 __deprecated; /* soft connect required */
+	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
 	unsigned	big_endian:1;	/* true if CPU uses big-endian */
 	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
 	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
 	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
 	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
-	unsigned	dma:1;		/* supports DMA */
-	unsigned	vendor_req:1;	/* vendor registers required */
+	unsigned	dma:1 __deprecated; /* supports DMA */
+	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
 
 	u8		num_eps;	/* number of endpoints _with_ ep0 */
-	u8		dma_channels;	/* number of dma channels */
+	u8		dma_channels __deprecated; /* number of dma channels */
 	u8		dyn_fifo_size;	/* dynamic size in bytes */
-	u8		vendor_ctrl;	/* vendor control reg width */
-	u8		vendor_stat;	/* vendor status reg witdh */
-	u8		dma_req_chan;	/* bitmask for required dma channels */
+	u8		vendor_ctrl __deprecated; /* vendor control reg width */
+	u8		vendor_stat __deprecated; /* vendor status reg witdh */
+	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
 	u8		ram_bits;	/* ram address size */
 
-	struct musb_hdrc_eps_bits *eps_bits;
+	struct musb_hdrc_eps_bits *eps_bits __deprecated;
 #ifdef CONFIG_BLACKFIN
         /* A GPIO controlling VRSEL in Blackfin */
         unsigned int    gpio_vrsel;
@@ -76,6 +76,9 @@ struct musb_hdrc_platform_data {
 	/* (HOST or OTG) msec/2 after VBUS on till power good */
 	u8		potpgt;
 
+	/* (HOST or OTG) program PHY for external Vbus */
+	unsigned	extvbus:1;
+
 	/* Power the device on or off */
 	int		(*set_power)(int state);
 
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index fef0972c814..f8302d036a7 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -9,6 +9,8 @@
 #ifndef __LINUX_USB_OTG_H
 #define __LINUX_USB_OTG_H
 
+#include <linux/notifier.h>
+
 /* OTG defines lots of enumeration states before device reset */
 enum usb_otg_state {
 	OTG_STATE_UNDEFINED = 0,
@@ -33,6 +35,14 @@ enum usb_otg_state {
 	OTG_STATE_A_VBUS_ERR,
 };
 
+enum usb_xceiv_events {
+	USB_EVENT_NONE,         /* no events or cable disconnected */
+	USB_EVENT_VBUS,         /* vbus valid event */
+	USB_EVENT_ID,           /* id was grounded */
+	USB_EVENT_CHARGER,      /* usb dedicated charger */
+	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
+};
+
 #define USB_OTG_PULLUP_ID		(1 << 0)
 #define USB_OTG_PULLDOWN_DP		(1 << 1)
 #define USB_OTG_PULLDOWN_DM		(1 << 2)
@@ -70,6 +80,9 @@ struct otg_transceiver {
 	struct otg_io_access_ops	*io_ops;
 	void __iomem			*io_priv;
 
+	/* for notification of usb_xceiv_events */
+	struct blocking_notifier_head	notifier;
+
 	/* to pass extra port status to the root hub */
 	u16			port_status;
 	u16			port_change;
@@ -213,6 +226,18 @@ otg_start_srp(struct otg_transceiver *otg)
 	return otg->start_srp(otg);
 }
 
+/* notifiers */
+static inline int
+otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&otg->notifier, nb);
+}
+
+static inline void
+otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&otg->notifier, nb);
+}
 
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 2526f3bbd27..0a555dd131f 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -19,4 +19,7 @@
 /* device can't handle its Configuration or Interface strings */
 #define USB_QUIRK_CONFIG_INTF_STRINGS	0x00000008
 
+/*device will morph if reset, don't use reset for handling errors */
+#define USB_QUIRK_RESET_MORPHS		0x00000010
+
 #endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1819396ed50..0a458b86193 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -351,14 +351,11 @@ static inline void usb_serial_debug_data(int debug,
 
 /* Use our own dbg macro */
 #undef dbg
-#define dbg(format, arg...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , \
-				## arg); \
-	} while (0)
-
-
+#define dbg(format, arg...)						\
+do {									\
+	if (debug)							\
+		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
+} while (0)
 
 #endif /* __LINUX_USB_SERIAL_H */
 
diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h
deleted file mode 100644
index 1cfac67191f..00000000000
--- a/include/linux/usb/vstusb.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*****************************************************************************
- *  File: drivers/usb/misc/vstusb.h
- *
- *  Purpose: Support for the bulk USB Vernier Spectrophotometers
- *
- *  Author:     EQware Engineering, Inc.
- *              Oregon City, OR, USA 97045
- *
- *  Copyright:  2007, 2008
- *              Vernier Software & Technology
- *              Beaverton, OR, USA 97005
- *
- *  Web:        www.vernier.com
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *****************************************************************************/
-/*****************************************************************************
- *
- *  The vstusb module is a standard usb 'client' driver running on top of the
- *  standard usb host controller stack.
- *
- *  In general, vstusb supports standard bulk usb pipes.  It supports multiple
- *  devices and multiple pipes per device.
- *
- *  The vstusb driver supports two interfaces:
- *  1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg
- *  	interface to any pipe with timeout support;
- *  2 - standard read/write with ioctl config - offers standard read/write
- *  	interface with ioctl configured pipes and timeouts.
- *
- *  Both interfaces can be signal from other process and will abort its i/o
- *  operation.
- *
- *  A timeout of 0 means NO timeout.  The user can still terminate the read via
- *  signal.
- *
- *  If using multiple threads with this driver, the user should ensure that
- *  any reads, writes, or ioctls are complete before closing the device.
- *  Changing read/write timeouts or pipes takes effect on next read/write.
- *
- *****************************************************************************/
-
-struct vstusb_args {
-	union {
-		/* this struct is used for IOCTL_VSTUSB_SEND_PIPE,	*
-		 * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops	*/
-		struct {
-			void __user	*buffer;
-			size_t          count;
-			unsigned int    timeout_ms;
-			int             pipe;
-		};
-
-		/* this one is used for IOCTL_VSTUSB_CONFIG_RW  	*/
-		struct {
-			int rd_pipe;
-			int rd_timeout_ms;
-			int wr_pipe;
-			int wr_timeout_ms;
-		};
-	};
-};
-
-#define VST_IOC_MAGIC 'L'
-#define VST_IOC_FIRST 0x20
-#define IOCTL_VSTUSB_SEND_PIPE	_IO(VST_IOC_MAGIC, VST_IOC_FIRST)
-#define IOCTL_VSTUSB_RECV_PIPE	_IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1)
-#define IOCTL_VSTUSB_CONFIG_RW	_IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2)