Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: fix kernel-doc warnings
  regulator: catch some registration errors
  regulator: Add basic DocBook manual
  regulator: Fix some kerneldoc rendering issues
  regulator: Add missing kerneldoc
  regulator: Clean up kerneldoc warnings
  regulator: Remove extraneous kerneldoc annotations
  regulator: init/link earlier
  regulator: move set_machine_constraints after regulator device initialization
  regulator: da903x: make da903x_is_enabled return 0 or 1
  regulator: da903x: add '\n' to error messages
  regulator: sysfs attribute reduction (v2)
  regulator: code shrink (v2)
  regulator: improved mode error checks
  regulator: enable/disable refcounting
  regulator: struct device - replace bus_id with dev_name(), dev_set_name()

3 files changed, 81 insertions, 5 deletions

diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index afdc4558bb9..801bf77ff4e 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -104,10 +104,10 @@ struct regulator;
 /**
  * struct regulator_bulk_data - Data used for bulk regulator operations.
  *
- * @supply   The name of the supply.  Initialised by the user before
- *           using the bulk regulator APIs.
- * @consumer The regulator consumer for the supply.  This will be managed
- *           by the bulk API.
+ * @supply:   The name of the supply.  Initialised by the user before
+ *            using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply.  This will be managed
+ *            by the bulk API.
  *
  * The regulator APIs provide a series of regulator_bulk_() API calls as
  * a convenience to consumers which require multiple supplies.  This
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index e37d8056198..2dae05705f1 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -24,7 +24,33 @@ struct regulator_init_data;
 /**
  * struct regulator_ops - regulator operations.
  *
- * This struct describes regulator operations.
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
+ *
+ * @enable: Enable the regulator.
+ * @disable: Disable the regulator.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
+ *
+ * @set_voltage: Set the voltage for the regulator within the range specified.
+ *               The driver should select the voltage closest to min_uV.
+ * @get_voltage: Return the currently configured voltage for the regulator.
+ *
+ * @set_current_limit: Configure a limit for a current-limited regulator.
+ * @get_current_limit: Get the limit for a current-limited regulator.
+ *
+ * @set_mode: Set the operating mode for the regulator.
+ * @get_mode: Get the current operating mode for the regulator.
+ * @get_optimum_mode: Get the most efficient operating mode for the regulator
+ *                    when running with the specified parameters.
+ *
+ * @set_suspend_voltage: Set the voltage for the regulator when the system
+ *                       is suspended.
+ * @set_suspend_enable: Mark the regulator as enabled when the system is
+ *                      suspended.
+ * @set_suspend_disable: Mark the regulator as disabled when the system is
+ *                       suspended.
+ * @set_suspend_mode: Set the operating mode for the regulator when the
+ *                    system is suspended.
  */
 struct regulator_ops {
 
@@ -75,6 +101,15 @@ enum regulator_type {
 /**
  * struct regulator_desc - Regulator descriptor
  *
+ * Each regulator registered with the core is described with a structure of
+ * this type.
+ *
+ * @name: Identifying name for the regulator.
+ * @id: Numerical identifier for the regulator.
+ * @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
+ * @type: Indicates if the regulator is a voltage or current regulator.
+ * @owner: Module providing the regulator, used for refcounting.
  */
 struct regulator_desc {
 	const char *name;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index c6d69331a81..3794773b23d 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -44,6 +44,10 @@ struct regulator;
  * struct regulator_state - regulator state during low power syatem states
  *
  * This describes a regulators state during a system wide low power state.
+ *
+ * @uV: Operating voltage during suspend.
+ * @mode: Operating mode during suspend.
+ * @enabled: Enabled during suspend.
  */
 struct regulator_state {
 	int uV;	/* suspend voltage */
@@ -55,6 +59,30 @@ struct regulator_state {
  * struct regulation_constraints - regulator operating constraints.
  *
  * This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ *
+ * @min_uA: Smallest consumers consumers may set.
+ * @max_uA: Largest current consumers may set.
+ *
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ *           started.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @state_disk: State for regulator when system is suspended in disk mode.
+ * @state_mem: State for regulator when system is suspended in mem mode.
+ * @state_standby: State for regulator when system is suspended in standby
+ *                 mode.
+ * @initial_state: Suspend state to set by default.
  */
 struct regulation_constraints {
 
@@ -93,6 +121,9 @@ struct regulation_constraints {
  * struct regulator_consumer_supply - supply -> device mapping
  *
  * This maps a supply name to a device.
+ *
+ * @dev: Device structure for the consumer.
+ * @supply: Name for the supply.
  */
 struct regulator_consumer_supply {
 	struct device *dev;	/* consumer */
@@ -103,6 +134,16 @@ struct regulator_consumer_supply {
  * struct regulator_init_data - regulator platform initialisation data.
  *
  * Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator_dev: Parent regulator (if any).
+ *
+ * @constraints: Constraints.  These must be specified for the regulator to
+ *               be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
  */
 struct regulator_init_data {
 	struct device *supply_regulator_dev; /* or NULL for LINE */