Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c

7 files changed, 137 insertions, 10 deletions

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 10eb9b38901..10d43d8c703 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -107,6 +107,14 @@ struct bt_power {
  */
 #define BT_CHANNEL_POLICY_AMP_PREFERRED		2
 
+#define BT_VOICE		11
+struct bt_voice {
+	__u16 setting;
+};
+
+#define BT_VOICE_TRANSPARENT			0x0003
+#define BT_VOICE_CVSD_16BIT			0x0060
+
 __printf(1, 2)
 int bt_info(const char *fmt, ...);
 __printf(1, 2)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 3c592cf473d..aaeaf0938ec 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -238,6 +238,7 @@ enum {
 #define LMP_CVSD	0x01
 #define LMP_PSCHEME	0x02
 #define LMP_PCONTROL	0x04
+#define LMP_TRANSPARENT	0x08
 
 #define LMP_RSSI_INQ	0x40
 #define LMP_ESCO	0x80
@@ -296,6 +297,12 @@ enum {
 #define HCI_AT_GENERAL_BONDING		0x04
 #define HCI_AT_GENERAL_BONDING_MITM	0x05
 
+/* I/O capabilities */
+#define HCI_IO_DISPLAY_ONLY	0x00
+#define HCI_IO_DISPLAY_YESNO	0x01
+#define HCI_IO_KEYBOARD_ONLY	0x02
+#define HCI_IO_NO_INPUT_OUTPUT	0x03
+
 /* Link Key types */
 #define HCI_LK_COMBINATION		0x00
 #define HCI_LK_LOCAL_UNIT		0x01
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index f77885ea78c..3ede820d328 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -320,6 +320,7 @@ struct hci_conn {
 	__u32		passkey_notify;
 	__u8		passkey_entered;
 	__u16		disc_timeout;
+	__u16		setting;
 	unsigned long	flags;
 
 	__u8		remote_cap;
@@ -569,7 +570,7 @@ static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev,
 }
 
 void hci_disconnect(struct hci_conn *conn, __u8 reason);
-void hci_setup_sync(struct hci_conn *conn, __u16 handle);
+bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 
 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
@@ -584,6 +585,8 @@ struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle);
 
 struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst,
 			     __u8 dst_type, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
+				 __u16 setting);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
@@ -797,6 +800,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define lmp_lsto_capable(dev)      ((dev)->features[0][7] & LMP_LSTO)
 #define lmp_inq_tx_pwr_capable(dev) ((dev)->features[0][7] & LMP_INQ_TX_PWR)
 #define lmp_ext_feat_capable(dev)  ((dev)->features[0][7] & LMP_EXTFEATURES)
+#define lmp_transp_capable(dev)    ((dev)->features[0][2] & LMP_TRANSPARENT)
 
 /* ----- Extended LMP capabilities ----- */
 #define lmp_host_ssp_capable(dev)  ((dev)->features[1][0] & LMP_HOST_SSP)
@@ -1213,4 +1217,8 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8],
 
 u8 bdaddr_to_le(u8 bdaddr_type);
 
+#define SCO_AIRMODE_MASK       0x0003
+#define SCO_AIRMODE_CVSD       0x0000
+#define SCO_AIRMODE_TRANSP     0x0003
+
 #endif /* __HCI_CORE_H */
diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
index 1e35c43657c..e252a31ee6b 100644
--- a/include/net/bluetooth/sco.h
+++ b/include/net/bluetooth/sco.h
@@ -73,6 +73,7 @@ struct sco_conn {
 struct sco_pinfo {
 	struct bt_sock	bt;
 	__u32		flags;
+	__u16		setting;
 	struct sco_conn	*conn;
 };
 
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 635e396b25b..cb710913d5c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2081,7 +2081,7 @@ struct cfg80211_update_ft_ies_params {
  * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
  *	frame on another channel
  *
- * @testmode_cmd: run a test mode command
+ * @testmode_cmd: run a test mode command; @wdev may be %NULL
  * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
  *	used by the function, but 0 and 1 must not be touched. Additionally,
  *	return error codes other than -ENOBUFS and -ENOENT will terminate the
@@ -2290,7 +2290,8 @@ struct cfg80211_ops {
 	void	(*rfkill_poll)(struct wiphy *wiphy);
 
 #ifdef CONFIG_NL80211_TESTMODE
-	int	(*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+	int	(*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev,
+				void *data, int len);
 	int	(*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
 				 struct netlink_callback *cb,
 				 void *data, int len);
@@ -4055,6 +4056,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
  * @sig_dbm: signal strength in mBm, or 0 if unknown
  * @buf: Management frame (header + body)
  * @len: length of the frame data
+ * @flags: flags, as defined in enum nl80211_rxmgmt_flags
  * @gfp: context flags
  *
  * This function is called whenever an Action frame is received for a station
@@ -4066,7 +4068,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
  * driver is responsible for rejecting the frame.
  */
 bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
-		      const u8 *buf, size_t len, gfp_t gfp);
+		      const u8 *buf, size_t len, u32 flags, gfp_t gfp);
 
 /**
  * cfg80211_mgmt_tx_status - notification of TX status for management frame
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ab94dbc331a..cc6035f1a2f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -375,7 +375,7 @@ struct ieee80211_bss_conf {
 };
 
 /**
- * enum mac80211_tx_control_flags - flags to describe transmission information/status
+ * enum mac80211_tx_info_flags - flags to describe transmission information/status
  *
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
@@ -471,7 +471,7 @@ struct ieee80211_bss_conf {
  * Note: If you have to add new flags to the enumeration, then don't
  *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
  */
-enum mac80211_tx_control_flags {
+enum mac80211_tx_info_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
 	IEEE80211_TX_CTL_ASSIGN_SEQ		= BIT(1),
 	IEEE80211_TX_CTL_NO_ACK			= BIT(2),
@@ -507,6 +507,18 @@ enum mac80211_tx_control_flags {
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
 
+/**
+ * enum mac80211_tx_control_flags - flags to describe transmit control
+ *
+ * @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control
+ *	protocol frame (e.g. EAP)
+ *
+ * These flags are used in tx_info->control.flags.
+ */
+enum mac80211_tx_control_flags {
+	IEEE80211_TX_CTRL_PORT_CTRL_PROTO	= BIT(0),
+};
+
 /*
  * This definition is used as a mask to clear all temporary flags, which are
  * set by the tx handlers for each transmission attempt by the mac80211 stack.
@@ -680,7 +692,8 @@ struct ieee80211_tx_info {
 			/* NB: vif can be NULL for injected frames */
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
-			/* 8 bytes free */
+			u32 flags;
+			/* 4 bytes free */
 		} control;
 		struct {
 			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
@@ -1508,6 +1521,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_RC_TABLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
+	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 };
 
 /**
@@ -2503,8 +2517,8 @@ enum ieee80211_roc_type {
  *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
  *	accordingly. This callback is not required and may sleep.
  *
- * @testmode_cmd: Implement a cfg80211 test mode command.
- *	The callback can sleep.
+ * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may
+ *	be %NULL. The callback can sleep.
  * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
  *
  * @flush: Flush all pending frames from the hardware queue, making sure
@@ -2765,7 +2779,8 @@ struct ieee80211_ops {
 	void (*rfkill_poll)(struct ieee80211_hw *hw);
 	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
 #ifdef CONFIG_NL80211_TESTMODE
-	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+	int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    void *data, int len);
 	int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb,
 			     struct netlink_callback *cb,
 			     void *data, int len);
@@ -3674,6 +3689,89 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf,
 			      int tid, struct ieee80211_key_seq *seq);
 
 /**
+ * ieee80211_set_key_tx_seq - set key TX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @seq: new sequence data
+ *
+ * This function allows a driver to set the current TX IV/PNs for the
+ * given key. This is useful when resuming from WoWLAN sleep and the
+ * device may have transmitted frames using the PTK, e.g. replies to
+ * ARP requests.
+ *
+ * Note that this function may only be called when no TX processing
+ * can be done concurrently.
+ */
+void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf,
+			      struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_set_key_rx_seq - set key RX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @tid: The TID, or -1 for the management frame value (CCMP only);
+ *	the value on TID 0 is also used for non-QoS frames. For
+ *	CMAC, only TID 0 is valid.
+ * @seq: new sequence data
+ *
+ * This function allows a driver to set the current RX IV/PNs for the
+ * given key. This is useful when resuming from WoWLAN sleep and GTK
+ * rekey may have been done while suspended. It should not be called
+ * if IV checking is done by the device and not by mac80211.
+ *
+ * Note that this function may only be called when no RX processing
+ * can be done concurrently.
+ */
+void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf,
+			      int tid, struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_remove_key - remove the given key
+ * @keyconf: the parameter passed with the set key
+ *
+ * Remove the given key. If the key was uploaded to the hardware at the
+ * time this function is called, it is not deleted in the hardware but
+ * instead assumed to have been removed already.
+ *
+ * Note that due to locking considerations this function can (currently)
+ * only be called during key iteration (ieee80211_iter_keys().)
+ */
+void ieee80211_remove_key(struct ieee80211_key_conf *keyconf);
+
+/**
+ * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN
+ * @vif: the virtual interface to add the key on
+ * @keyconf: new key data
+ *
+ * When GTK rekeying was done while the system was suspended, (a) new
+ * key(s) will be available. These will be needed by mac80211 for proper
+ * RX processing, so this function allows setting them.
+ *
+ * The function returns the newly allocated key structure, which will
+ * have similar contents to the passed key configuration but point to
+ * mac80211-owned memory. In case of errors, the function returns an
+ * ERR_PTR(), use IS_ERR() etc.
+ *
+ * Note that this function assumes the key isn't added to hardware
+ * acceleration, so no TX will be done with the key. Since it's a GTK
+ * on managed (station) networks, this is true anyway. If the driver
+ * calls this function from the resume callback and subsequently uses
+ * the return code 1 to reconfigure the device, this key will be part
+ * of the reconfiguration.
+ *
+ * Note that the driver should also call ieee80211_set_key_rx_seq()
+ * for the new key for each TID to set up sequence counters properly.
+ *
+ * IMPORTANT: If this replaces a key that is present in the hardware,
+ * then it will attempt to remove it during this call. In many cases
+ * this isn't what you want, so call ieee80211_remove_key() first for
+ * the key that's being replaced.
+ */
+struct ieee80211_key_conf *
+ieee80211_gtk_rekey_add(struct ieee80211_vif *vif,
+			struct ieee80211_key_conf *keyconf);
+
+/**
  * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying
  * @vif: virtual interface the rekeying was done on
  * @bssid: The BSSID of the AP, for checking association
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 5f286b726bb..f68ee68e4e3 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -224,6 +224,9 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev,
 				 u8 *gt, u8 gt_len);
 u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len);
 
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name,
+			 u32 result);
+
 int nfc_targets_found(struct nfc_dev *dev,
 		      struct nfc_target *targets, int ntargets);
 int nfc_target_lost(struct nfc_dev *dev, u32 target_idx);