Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

5 files changed, 79 insertions, 4 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 7f4df7c7659..be456450cd2 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -714,6 +714,7 @@ struct ieee80211_ht_addt_info {
 #define IEEE80211_HT_CAP_SGI_40			0x0040
 #define IEEE80211_HT_CAP_DELAY_BA		0x0400
 #define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
 /* 802.11n HT capability AMPDU settings */
 #define IEEE80211_HT_CAP_AMPDU_FACTOR		0x03
 #define IEEE80211_HT_CAP_AMPDU_DENSITY		0x1C
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2be7c63bc0f..0c1147de3ec 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -89,6 +89,8 @@
  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
  *	or, if no MAC address given, all mesh paths, on the interface identified
  *	by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ *	%NL80211_ATTR_IFINDEX.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
@@ -127,6 +129,8 @@ enum nl80211_commands {
 	NL80211_CMD_NEW_MPATH,
 	NL80211_CMD_DEL_MPATH,
 
+	NL80211_CMD_SET_BSS,
+
 	/* add commands here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -134,6 +138,11 @@ enum nl80211_commands {
 	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
 };
 
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -192,6 +201,15 @@ enum nl80211_commands {
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ *	(u8, 0 or 1)
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -235,16 +253,29 @@ enum nl80211_attrs {
 	NL80211_ATTR_MPATH_NEXT_HOP,
 	NL80211_ATTR_MPATH_INFO,
 
+	NL80211_ATTR_BSS_CTS_PROT,
+	NL80211_ATTR_BSS_SHORT_PREAMBLE,
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+	NL80211_ATTR_HT_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
 	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
 };
 
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+#define NL80211_HT_CAPABILITY_LEN		26
 
 /**
  * enum nl80211_iftype - (virtual) interface types
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index ebad0bac980..99a0f991e85 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -245,8 +245,6 @@
 
 /* SPROM Revision 3 (inherits most data from rev 2) */
 #define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_ET0MAC		0x1050	/* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM3_ET1MAC		0x1050	/* 6 bytes MAC address for 802.11a ?? */
 #define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
 #define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
 #define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
@@ -267,8 +265,6 @@
 
 /* SPROM Revision 4 */
 #define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ET0MAC		0x1018	/* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM4_ET1MAC		0x1018	/* 6 bytes MAC address for 802.11a ?? */
 #define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
 #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
@@ -316,6 +312,21 @@
 #define SSB_SPROM4_PA1B1		0x1090
 #define SSB_SPROM4_PA1B2		0x1092
 
+/* SPROM Revision 5 (inherits most data from rev 4) */
+#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+
+
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
 	SSB_SPROM1CCODE_WORLD = 0,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e00750836ba..0a72d1e3d3a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -152,6 +152,7 @@ struct station_parameters {
 	u16 aid;
 	u8 supported_rates_len;
 	u8 plink_action;
+	struct ieee80211_ht_cap *ht_capa;
 };
 
 /**
@@ -268,6 +269,23 @@ struct mpath_info {
 	u8 flags;
 };
 
+/**
+ * struct bss_parameters - BSS parameters
+ *
+ * Used to change BSS parameters (mainly for AP mode).
+ *
+ * @use_cts_prot: Whether to use CTS protection
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_preamble: Whether the use of short preambles is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_slot_time: Whether the use of short slot time is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ */
+struct bss_parameters {
+	int use_cts_prot;
+	int use_short_preamble;
+	int use_short_slot_time;
+};
 
 /* from net/wireless.h */
 struct wiphy;
@@ -318,6 +336,8 @@ struct wiphy;
  * @change_station: Modify a given station.
  *
  * @set_mesh_cfg: set mesh parameters (by now, just mesh id)
+ *
+ * @change_bss: Modify parameters for a given BSS.
  */
 struct cfg80211_ops {
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
@@ -370,6 +390,9 @@ struct cfg80211_ops {
 	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
 			       int idx, u8 *dst, u8 *next_hop,
 			       struct mpath_info *pinfo);
+
+	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
+			      struct bss_parameters *params);
 };
 
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0fdc3dabc96..7c399a9c11d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -158,12 +158,14 @@ struct ieee80211_low_level_stats {
  *	also implies a change in the AID.
  * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed
  * @BSS_CHANGED_ERP_PREAMBLE: preamble changed
+ * @BSS_CHANGED_ERP_SLOT: slot timing changed
  * @BSS_CHANGED_HT: 802.11n parameters changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
 	BSS_CHANGED_ERP_CTS_PROT	= 1<<1,
 	BSS_CHANGED_ERP_PREAMBLE	= 1<<2,
+	BSS_CHANGED_ERP_SLOT		= 1<<3,
 	BSS_CHANGED_HT                  = 1<<4,
 };
 
@@ -177,6 +179,7 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @use_short_slot: use short slot time (only relevant for ERP)
  * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
@@ -192,6 +195,7 @@ struct ieee80211_bss_conf {
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
+	bool use_short_slot;
 	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
@@ -420,6 +424,11 @@ struct ieee80211_rx_status {
  * @IEEE80211_CONF_PS: Enable 802.11 power save mode
  */
 enum ieee80211_conf_flags {
+	/*
+	 * TODO: IEEE80211_CONF_SHORT_SLOT_TIME will be removed once drivers
+	 * have been converted to use bss_info_changed() for slot time
+	 * configuration
+	 */
 	IEEE80211_CONF_SHORT_SLOT_TIME	= (1<<0),
 	IEEE80211_CONF_RADIOTAP		= (1<<1),
 	IEEE80211_CONF_SUPPORT_HT_MODE	= (1<<2),