Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
  regulator: wm831x_reg_read() failure unnoticed in wm831x_aldo_get_mode()
  twl-regulator: Fix reg_disable functionality for 4030 and 6030
  twl-regulator: Add turnon delay to reg_enable
  twl-regulator: Restore REMAP configuration in regulator probe
  twl-regulator: Add turnon-delay and REMAP config to twlreg_info struct
  twl-regulator: Define critical regulators as always_on
  twl-regulator: Add all twl4030 regulators to twlreg_info
  regulator: mc13783-regulator: correct the probing time.
  regulator: Fix unbalanced disables/enables in regulator_bulk_{enable,disable} error path
  regulator: core.c: Small coding style cleanup (indentation fixup)
  drivers/regulator: use PTR_ERR to get error code
  regulator: consumer.h - fix build when consumer.h is #included first.
  regulator/mc13783: various cleanups
  regulator/mc13783: rename source file to match other drivers
  Fix some AB3100 regulator issues
  regulator: keep index within bounds in da9034_get_ldo12_voltage()
  regulator: Ensure val is initialised in 88pm8607 choose_voltage()
  regulator: Remove duplicate consts from ab3100
  regulator: Handle regulators without suspend mode configuration
  regulator: Factor out regulator name pretty printing
  ...

4 files changed, 81 insertions, 1 deletions

diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 415c228743d..fd322aca33b 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -41,6 +41,23 @@ struct wm831x_battery_pdata {
 	int timeout;        /** Charge cycle timeout, in minutes */
 };
 
+/**
+ * Configuration for the WM831x DC-DC BuckWise convertors.  This
+ * should be passed as driver_data in the regulator_init_data.
+ *
+ * Currently all the configuration is for the fast DVS switching
+ * support of the devices.  This allows MFPs on the device to be
+ * configured as an input to switch between two output voltages,
+ * allowing voltage transitions without the expense of an access over
+ * I2C or SPI buses.
+ */
+struct wm831x_buckv_pdata {
+	int dvs_gpio;        /** CPU GPIO to use for DVS switching */
+	int dvs_control_src; /** Hardware DVS source to use (1 or 2) */
+	int dvs_init_state;  /** DVS state to expect on startup */
+	int dvs_state_gpio;  /** CPU GPIO to use for monitoring status */
+};
+
 /* Sources for status LED configuration.  Values are register values
  * plus 1 to allow for a zero default for preserve.
  */
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 490c5b37b6d..030d92255c7 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -35,6 +35,8 @@
 #ifndef __LINUX_REGULATOR_CONSUMER_H_
 #define __LINUX_REGULATOR_CONSUMER_H_
 
+#include <linux/device.h>
+
 /*
  * Regulator operating modes.
  *
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 87f5f176d4e..234a8476cba 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -43,16 +43,20 @@ struct regulator;
 /**
  * struct regulator_state - regulator state during low power system states
  *
- * This describes a regulators state during a system wide low power state.
+ * This describes a regulators state during a system wide low power
+ * state.  One of enabled or disabled must be set for the
+ * configuration to be applied.
  *
  * @uV: Operating voltage during suspend.
  * @mode: Operating mode during suspend.
  * @enabled: Enabled during suspend.
+ * @disabled: Disabled during suspend.
  */
 struct regulator_state {
 	int uV;	/* suspend voltage */
 	unsigned int mode; /* suspend regulator operating mode */
 	int enabled; /* is regulator enabled in this suspend state */
+	int disabled; /* is the regulator disbled in this suspend state */
 };
 
 /**
diff --git a/include/linux/regulator/max8660.h b/include/linux/regulator/max8660.h
new file mode 100644
index 00000000000..9936763621c
--- /dev/null
+++ b/include/linux/regulator/max8660.h
@@ -0,0 +1,57 @@
+/*
+ * max8660.h  --  Voltage regulation for the Maxim 8660/8661
+ *
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8660_H
+#define __LINUX_REGULATOR_MAX8660_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8660_V3,
+	MAX8660_V4,
+	MAX8660_V5,
+	MAX8660_V6,
+	MAX8660_V7,
+	MAX8660_V_END,
+};
+
+/**
+ * max8660_subdev_data - regulator subdev data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct max8660_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max8660_platform_data - platform data for max8660
+ * @num_subdevs: number of regulators used
+ * @subdevs: pointer to regulators used
+ * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
+ */
+struct max8660_platform_data {
+	int num_subdevs;
+	struct max8660_subdev_data *subdevs;
+	unsigned en34_is_high:1;
+};
+#endif