diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2011-03-17 13:24:36 +0100 |
|---|---|---|
| committer | Liam Girdwood <lrg@slimlogic.co.uk> | 2011-03-26 14:15:06 +0000 |
| commit | 77af1b2641faf45788a0d480db94082ebee931dc (patch) | |
| tree | 66f06c3244e6c961f15b22e66156f388e0420994 /include | |
| parent | 79568b941277b5986a8a7f0fb8578b2ccfc3e87e (diff) | |
regulator: add set_voltage_time_sel infrastructure
This makes it possible to set the stabilization time for voltage
regulators in the same manner as enable_time(). The interface
only supports regulators that implements fixed selectors.
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/regulator/driver.h | 11 |
1 files changed, 9 insertions, 2 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b8ed16a33c4..6c433b89c80 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -63,7 +63,11 @@ enum regulator_status { * when running with the specified parameters. * * @enable_time: Time taken for the regulator voltage output voltage to - * stabalise after being enabled, in microseconds. + * stabilise after being enabled, in microseconds. + * @set_voltage_time_sel: Time taken for the regulator voltage output voltage + * to stabilise after being set to a new value, in microseconds. + * The function provides the from and to voltage selector, the + * function should return the worst case. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. @@ -103,8 +107,11 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); - /* Time taken to enable the regulator */ + /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_voltage_time_sel) (struct regulator_dev *, + unsigned int old_selector, + unsigned int new_selector); /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs |