Merge branch 'sf2'

Florian Fainelli says:

====================
dsa: Broadcom Starfighter 2 switch support

This patch series adds support for the Broadcom Starfighter 2 (Roboswitch
successor) using the existing DSA infrastructure. This integrated switch
is heavily used in Set Top Box, Cable gateways and DSL gateways products
from Broadcom, and to a larger extent the new ARM-based Wi-Fi routers although
slightly differently.

Changes in v5 are the introduction of ETH_P_XDSA as suggested by Alexander to
help capture applications see this is a multiplexed DSA approach now.

Changes in v4 are the introducing of an indirection level for DSA switch tag
protocols receive and transmit functions.

I intentionnaly did not address one comment from Alexander who suggested to
move port_names and port_dn in a separate structure since that involves
touching arch/arm/ and arch/blackfin/ code which I am not yet comfortable
doing.

Notable changes in v3 is the preliminary patch that reworks the skb->protocol
override helpers for non-Ethertype switch tags, based on feedback from
Alexander Duyck.

The biggest changes from v1 of this patch series are:

- use the new fixed PHY helpers
- improved the switch driver with more complete features (interrupts,
  (RG)MII configuration, memory arrays power down/up, port disabling/enable
  VLAN separation

Future work will focus on bringing the upstream driver in feature parity with
the current downstream driver, including:

- adding Wake-on-LAN support to the switch
- adding suspend/resume callbacks for S2/S3 Power Management modes
- extending the switch register interface to cover BCM5310X SoCs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 30 insertions, 18 deletions

diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 0a49632fac4..484f695351a 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -144,6 +144,11 @@ dsa_switch_setup(struct dsa_switch_tree *dst, int index,
 		goto out;
 	}
 
+	/* Make the built-in MII bus mask match the number of ports,
+	 * switch drivers can override this later
+	 */
+	ds->phys_mii_mask = ds->phys_port_mask;
+
 	/*
 	 * If the CPU connects to this switch, set the switch tree
 	 * tagging protocol to the preferred tagging format of this
@@ -410,6 +415,7 @@ static int dsa_of_probe(struct platform_device *pdev)
 		chip_index++;
 		cd = &pd->chip[chip_index];
 
+		cd->of_node = child;
 		cd->mii_bus = &mdio_bus->dev;
 
 		sw_addr = of_get_property(child, "reg", NULL);
@@ -431,6 +437,8 @@ static int dsa_of_probe(struct platform_device *pdev)
 			if (!port_name)
 				continue;
 
+			cd->port_dn[port_index] = port;
+
 			cd->port_names[port_index] = kstrdup(port_name,
 					GFP_KERNEL);
 			if (!cd->port_names[port_index]) {
@@ -608,7 +616,26 @@ static void dsa_shutdown(struct platform_device *pdev)
 {
 }
 
+static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
+			  struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst = dev->dsa_ptr;
+
+	if (unlikely(dst == NULL)) {
+		kfree_skb(skb);
+		return 0;
+	}
+
+	return dst->ops->rcv(skb, dev, pt, orig_dev);
+}
+
+struct packet_type dsa_pack_type __read_mostly = {
+	.type	= cpu_to_be16(ETH_P_XDSA),
+	.func	= dsa_switch_rcv,
+};
+
 static const struct of_device_id dsa_of_match_table[] = {
+	{ .compatible = "brcm,bcm7445-switch-v4.0" },
 	{ .compatible = "marvell,dsa", },
 	{}
 };
@@ -633,30 +660,15 @@ static int __init dsa_init_module(void)
 	if (rc)
 		return rc;
 
-#ifdef CONFIG_NET_DSA_TAG_DSA
-	dev_add_pack(&dsa_packet_type);
-#endif
-#ifdef CONFIG_NET_DSA_TAG_EDSA
-	dev_add_pack(&edsa_packet_type);
-#endif
-#ifdef CONFIG_NET_DSA_TAG_TRAILER
-	dev_add_pack(&trailer_packet_type);
-#endif
+	dev_add_pack(&dsa_pack_type);
+
 	return 0;
 }
 module_init(dsa_init_module);
 
 static void __exit dsa_cleanup_module(void)
 {
-#ifdef CONFIG_NET_DSA_TAG_TRAILER
-	dev_remove_pack(&trailer_packet_type);
-#endif
-#ifdef CONFIG_NET_DSA_TAG_EDSA
-	dev_remove_pack(&edsa_packet_type);
-#endif
-#ifdef CONFIG_NET_DSA_TAG_DSA
-	dev_remove_pack(&dsa_packet_type);
-#endif
+	dev_remove_pack(&dsa_pack_type);
 	platform_driver_unregister(&dsa_driver);
 }
 module_exit(dsa_cleanup_module);