Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 55 insertions, 55 deletions

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 6e412a60a91..92ac7e7363a 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -214,7 +214,7 @@ static int __init ic_open_devs(void)
 		if (!(dev->flags & IFF_LOOPBACK))
 			continue;
 		if (dev_change_flags(dev, dev->flags | IFF_UP) < 0)
-			printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name);
+			pr_err("IP-Config: Failed to open %s\n", dev->name);
 	}
 
 	for_each_netdev(&init_net, dev) {
@@ -223,7 +223,8 @@ static int __init ic_open_devs(void)
 			if (dev->mtu >= 364)
 				able |= IC_BOOTP;
 			else
-				printk(KERN_WARNING "DHCP/BOOTP: Ignoring device %s, MTU %d too small", dev->name, dev->mtu);
+				pr_warn("DHCP/BOOTP: Ignoring device %s, MTU %d too small",
+					dev->name, dev->mtu);
 			if (!(dev->flags & IFF_NOARP))
 				able |= IC_RARP;
 			able &= ic_proto_enabled;
@@ -231,7 +232,8 @@ static int __init ic_open_devs(void)
 				continue;
 			oflags = dev->flags;
 			if (dev_change_flags(dev, oflags | IFF_UP) < 0) {
-				printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name);
+				pr_err("IP-Config: Failed to open %s\n",
+				       dev->name);
 				continue;
 			}
 			if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) {
@@ -273,9 +275,10 @@ have_carrier:
 
 	if (!ic_first_dev) {
 		if (user_dev_name[0])
-			printk(KERN_ERR "IP-Config: Device `%s' not found.\n", user_dev_name);
+			pr_err("IP-Config: Device `%s' not found\n",
+			       user_dev_name);
 		else
-			printk(KERN_ERR "IP-Config: No network devices available.\n");
+			pr_err("IP-Config: No network devices available\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -359,17 +362,20 @@ static int __init ic_setup_if(void)
 	strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->name);
 	set_sockaddr(sin, ic_myaddr, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFADDR, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface address (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface address (%d)\n",
+		       err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_netmask, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface netmask (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface netmask (%d)\n",
+		       err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface broadcast address (%d)\n",
+		       err);
 		return -1;
 	}
 	/* Handle the case where we need non-standard MTU on the boot link (a network
@@ -380,8 +386,8 @@ static int __init ic_setup_if(void)
 		strcpy(ir.ifr_name, ic_dev->name);
 		ir.ifr_mtu = ic_dev_mtu;
 		if ((err = ic_dev_ioctl(SIOCSIFMTU, &ir)) < 0)
-			printk(KERN_ERR "IP-Config: Unable to set interface mtu to %d (%d).\n",
-			                 ic_dev_mtu, err);
+			pr_err("IP-Config: Unable to set interface mtu to %d (%d)\n",
+			       ic_dev_mtu, err);
 	}
 	return 0;
 }
@@ -396,7 +402,7 @@ static int __init ic_setup_routes(void)
 
 		memset(&rm, 0, sizeof(rm));
 		if ((ic_gateway ^ ic_myaddr) & ic_netmask) {
-			printk(KERN_ERR "IP-Config: Gateway not on directly connected network.\n");
+			pr_err("IP-Config: Gateway not on directly connected network\n");
 			return -1;
 		}
 		set_sockaddr((struct sockaddr_in *) &rm.rt_dst, 0, 0);
@@ -404,7 +410,8 @@ static int __init ic_setup_routes(void)
 		set_sockaddr((struct sockaddr_in *) &rm.rt_gateway, ic_gateway, 0);
 		rm.rt_flags = RTF_UP | RTF_GATEWAY;
 		if ((err = ic_route_ioctl(SIOCADDRT, &rm)) < 0) {
-			printk(KERN_ERR "IP-Config: Cannot add default route (%d).\n", err);
+			pr_err("IP-Config: Cannot add default route (%d)\n",
+			       err);
 			return -1;
 		}
 	}
@@ -437,8 +444,8 @@ static int __init ic_defaults(void)
 		else if (IN_CLASSC(ntohl(ic_myaddr)))
 			ic_netmask = htonl(IN_CLASSC_NET);
 		else {
-			printk(KERN_ERR "IP-Config: Unable to guess netmask for address %pI4\n",
-				&ic_myaddr);
+			pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
+			       &ic_myaddr);
 			return -1;
 		}
 		printk("IP-Config: Guessing netmask %pI4\n", &ic_netmask);
@@ -688,8 +695,8 @@ ic_dhcp_init_options(u8 *options)
 			e += len;
 		}
 		if (*vendor_class_identifier) {
-			printk(KERN_INFO "DHCP: sending class identifier \"%s\"\n",
-			       vendor_class_identifier);
+			pr_info("DHCP: sending class identifier \"%s\"\n",
+				vendor_class_identifier);
 			*e++ = 60;	/* Class-identifier */
 			len = strlen(vendor_class_identifier);
 			*e++ = len;
@@ -949,8 +956,7 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
 	/* Fragments are not supported */
 	if (ip_is_fragment(h)) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Ignoring fragmented "
-			       "reply.\n");
+			pr_err("DHCP/BOOTP: Ignoring fragmented reply\n");
 		goto drop;
 	}
 
@@ -999,8 +1005,7 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
 	if (b->op != BOOTP_REPLY ||
 	    b->xid != d->xid) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Reply not for us, "
-			       "op[%x] xid[%x]\n",
+			pr_err("DHCP/BOOTP: Reply not for us, op[%x] xid[%x]\n",
 			       b->op, b->xid);
 		goto drop_unlock;
 	}
@@ -1008,7 +1013,7 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
 	/* Is it a reply for the device we are configuring? */
 	if (b->xid != ic_dev_xid) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet\n");
+			pr_err("DHCP/BOOTP: Ignoring delayed packet\n");
 		goto drop_unlock;
 	}
 
@@ -1146,17 +1151,17 @@ static int __init ic_dynamic(void)
 	 * are missing, and without DHCP/BOOTP/RARP we are unable to get it.
 	 */
 	if (!ic_proto_enabled) {
-		printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n");
+		pr_err("IP-Config: Incomplete network configuration information\n");
 		return -1;
 	}
 
 #ifdef IPCONFIG_BOOTP
 	if ((ic_proto_enabled ^ ic_proto_have_if) & IC_BOOTP)
-		printk(KERN_ERR "DHCP/BOOTP: No suitable device found.\n");
+		pr_err("DHCP/BOOTP: No suitable device found\n");
 #endif
 #ifdef IPCONFIG_RARP
 	if ((ic_proto_enabled ^ ic_proto_have_if) & IC_RARP)
-		printk(KERN_ERR "RARP: No suitable device found.\n");
+		pr_err("RARP: No suitable device found\n");
 #endif
 
 	if (!ic_proto_have_if)
@@ -1183,11 +1188,11 @@ static int __init ic_dynamic(void)
 	 * [Actually we could now, but the nothing else running note still
 	 *  applies.. - AC]
 	 */
-	printk(KERN_NOTICE "Sending %s%s%s requests .",
-	       do_bootp
-		? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "",
-	       (do_bootp && do_rarp) ? " and " : "",
-	       do_rarp ? "RARP" : "");
+	pr_notice("Sending %s%s%s requests .",
+		  do_bootp
+		  ? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "",
+		  (do_bootp && do_rarp) ? " and " : "",
+		  do_rarp ? "RARP" : "");
 
 	start_jiffies = jiffies;
 	d = ic_first_dev;
@@ -1216,13 +1221,13 @@ static int __init ic_dynamic(void)
 		    (ic_proto_enabled & IC_USE_DHCP) &&
 		    ic_dhcp_msgtype != DHCPACK) {
 			ic_got_reply = 0;
-			printk(KERN_CONT ",");
+			pr_cont(",");
 			continue;
 		}
 #endif /* IPCONFIG_DHCP */
 
 		if (ic_got_reply) {
-			printk(KERN_CONT " OK\n");
+			pr_cont(" OK\n");
 			break;
 		}
 
@@ -1230,7 +1235,7 @@ static int __init ic_dynamic(void)
 			continue;
 
 		if (! --retries) {
-			printk(KERN_CONT " timed out!\n");
+			pr_cont(" timed out!\n");
 			break;
 		}
 
@@ -1240,7 +1245,7 @@ static int __init ic_dynamic(void)
 		if (timeout > CONF_TIMEOUT_MAX)
 			timeout = CONF_TIMEOUT_MAX;
 
-		printk(KERN_CONT ".");
+		pr_cont(".");
 	}
 
 #ifdef IPCONFIG_BOOTP
@@ -1260,8 +1265,8 @@ static int __init ic_dynamic(void)
 	printk("IP-Config: Got %s answer from %pI4, ",
 		((ic_got_reply & IC_RARP) ? "RARP"
 		 : (ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP"),
-		&ic_servaddr);
-	printk(KERN_CONT "my address is %pI4\n", &ic_myaddr);
+	       &ic_servaddr);
+	pr_cont("my address is %pI4\n", &ic_myaddr);
 
 	return 0;
 }
@@ -1437,24 +1442,22 @@ static int __init ip_auto_config(void)
 			 */
 #ifdef CONFIG_ROOT_NFS
 			if (ROOT_DEV ==  Root_NFS) {
-				printk(KERN_ERR
-					"IP-Config: Retrying forever (NFS root)...\n");
+				pr_err("IP-Config: Retrying forever (NFS root)...\n");
 				goto try_try_again;
 			}
 #endif
 
 			if (--retries) {
-				printk(KERN_ERR
-				       "IP-Config: Reopening network devices...\n");
+				pr_err("IP-Config: Reopening network devices...\n");
 				goto try_try_again;
 			}
 
 			/* Oh, well.  At least we tried. */
-			printk(KERN_ERR "IP-Config: Auto-configuration of network failed.\n");
+			pr_err("IP-Config: Auto-configuration of network failed\n");
 			return -1;
 		}
 #else /* !DYNAMIC */
-		printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n");
+		pr_err("IP-Config: Incomplete network configuration information\n");
 		ic_close_devs();
 		return -1;
 #endif /* IPCONFIG_DYNAMIC */
@@ -1492,19 +1495,16 @@ static int __init ip_auto_config(void)
 	/*
 	 * Clue in the operator.
 	 */
-	printk("IP-Config: Complete:\n");
-	printk("     device=%s", ic_dev->name);
-	printk(KERN_CONT ", addr=%pI4", &ic_myaddr);
-	printk(KERN_CONT ", mask=%pI4", &ic_netmask);
-	printk(KERN_CONT ", gw=%pI4", &ic_gateway);
-	printk(KERN_CONT ",\n     host=%s, domain=%s, nis-domain=%s",
-	       utsname()->nodename, ic_domain, utsname()->domainname);
-	printk(KERN_CONT ",\n     bootserver=%pI4", &ic_servaddr);
-	printk(KERN_CONT ", rootserver=%pI4", &root_server_addr);
-	printk(KERN_CONT ", rootpath=%s", root_server_path);
+	pr_info("IP-Config: Complete:\n");
+	pr_info("     device=%s, addr=%pI4, mask=%pI4, gw=%pI4\n",
+		ic_dev->name, &ic_myaddr, &ic_netmask, &ic_gateway);
+	pr_info("     host=%s, domain=%s, nis-domain=%s\n",
+		utsname()->nodename, ic_domain, utsname()->domainname);
+	pr_info("     bootserver=%pI4, rootserver=%pI4, rootpath=%s",
+		&ic_servaddr, &root_server_addr, root_server_path);
 	if (ic_dev_mtu)
-		printk(KERN_CONT ", mtu=%d", ic_dev_mtu);
-	printk(KERN_CONT "\n");
+		pr_cont(", mtu=%d", ic_dev_mtu);
+	pr_cont("\n");
 #endif /* !SILENT */
 
 	return 0;
@@ -1637,8 +1637,8 @@ static int __init vendor_class_identifier_setup(char *addrs)
 	if (strlcpy(vendor_class_identifier, addrs,
 		    sizeof(vendor_class_identifier))
 	    >= sizeof(vendor_class_identifier))
-		printk(KERN_WARNING "DHCP: vendorclass too long, truncated to \"%s\"",
-		       vendor_class_identifier);
+		pr_warn("DHCP: vendorclass too long, truncated to \"%s\"",
+			vendor_class_identifier);
 	return 1;
 }