Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 17 insertions, 16 deletions

diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index d0667d68351..b343f50dc8d 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -52,17 +52,18 @@
  *    Change speed of the driver. If the remote device is a DCE, then this
  *    should make it change the speed of its serial port
  */
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+		struct tty_struct *tty)
 {
 	unsigned int cflag, cval;
 	int baud;
 
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
-	if (!self->tty || !self->tty->termios || !self->ircomm)
+	if (!self->ircomm)
 		return;
 
-	cflag = self->tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	/*  byte size and parity */
 	switch (cflag & CSIZE) {
@@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
 		cval |= IRCOMM_PARITY_EVEN;
 
 	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(self->tty);
+	baud = tty_get_baud_rate(tty);
 	if (!baud)
 		baud = 9600;	/* B0 transition handled in rs_set_termios */
 
@@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
 
 	/* CTS flow control flag and modem status interrupts */
 	if (cflag & CRTSCTS) {
-		self->flags |= ASYNC_CTS_FLOW;
+		self->port.flags |= ASYNC_CTS_FLOW;
 		self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
 		/* This got me. Bummer. Jean II */
 		if (self->service_type == IRCOMM_3_WIRE_RAW)
 			IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
 	} else {
-		self->flags &= ~ASYNC_CTS_FLOW;
+		self->port.flags &= ~ASYNC_CTS_FLOW;
 		self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
 	}
 	if (cflag & CLOCAL)
-		self->flags &= ~ASYNC_CHECK_CD;
+		self->port.flags &= ~ASYNC_CHECK_CD;
 	else
-		self->flags |= ASYNC_CHECK_CD;
+		self->port.flags |= ASYNC_CHECK_CD;
 #if 0
 	/*
 	 * Set up parity check flag
@@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 			    struct ktermios *old_termios)
 {
 	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	if ((cflag == old_termios->c_cflag) &&
-	    (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+	    (RELEVANT_IFLAG(tty->termios.c_iflag) ==
 	     RELEVANT_IFLAG(old_termios->c_iflag)))
 	{
 		return;
 	}
 
-	ircomm_tty_change_speed(self);
+	ircomm_tty_change_speed(self, tty);
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) &&
@@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 	if (!(old_termios->c_cflag & CBAUD) &&
 	    (cflag & CBAUD)) {
 		self->settings.dte |= IRCOMM_DTR;
-		if (!(tty->termios->c_cflag & CRTSCTS) ||
+		if (!(tty->termios.c_cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
 			self->settings.dte |= IRCOMM_RTS;
 		}
@@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS))
+	    !(tty->termios.c_cflag & CRTSCTS))
 	{
 		tty->hw_stopped = 0;
 		ircomm_tty_start(tty);
@@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
 
 	memset(&info, 0, sizeof(info));
 	info.line = self->line;
-	info.flags = self->flags;
+	info.flags = self->port.flags;
 	info.baud_base = self->settings.data_rate;
-	info.close_delay = self->close_delay;
-	info.closing_wait = self->closing_wait;
+	info.close_delay = self->port.close_delay;
+	info.closing_wait = self->port.closing_wait;
 
 	/* For compatibility  */
 	info.type = PORT_16550A;