Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Fix include order for bison/flex-generated C files, from Ben Hutchings

 * Build fixes and documentation corrections from David Ahern

 * Group parsing support, from Jiri Olsa

 * UI/gtk refactorings and improvements from Namhyung Kim

 * NULL deref fix for perf script, from Namhyung Kim

 * Assorted cleanups from Robert Richter

 * Let O= makes handle relative paths, from Steven Rostedt

 * perf script python fixes, from Feng Tang.

 * Improve 'perf lock' error message when the needed tracepoints
   are not present, from David Ahern.

 * Initial bash completion support, from Frederic Weisbecker

 * Allow building without libelf, from Namhyung Kim.

 * Support DWARF CFI based unwind to have callchains when %bp
   based unwinding is not possible, from Jiri Olsa.

 * Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
   section was the end goal, several fixes for code that handles all
   architectures and cleanups are included, from Cody Schafer.

 * Add a description for the JIT interface, from Andi Kleen.

 * Assorted fixes for Documentation and build in 32 bit, from Robert Richter

 * Add support for non-tracepoint events in perf script python, from Feng Tang

 * Cache the libtraceevent event_format associated to each evsel early, so that we
   avoid relookups, i.e. calling pevent_find_event repeatedly when processing
   tracepoint events.

   [ This is to reduce the surface contact with libtraceevents and make clear what
     is that the perf tools needs from that lib: so far parsing the common and per
     event fields. ]

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 118 insertions, 3 deletions

diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 2749cb86b46..c384e77ff77 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -14,6 +14,9 @@
 
 #define MESH_PATH_TIMEOUT	5000
 #define MESH_RANN_INTERVAL      5000
+#define MESH_PATH_TO_ROOT_TIMEOUT      6000
+#define MESH_ROOT_INTERVAL     5000
+#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
 
 /*
  * Minimum interval between two consecutive PREQs originated by the same
@@ -62,9 +65,15 @@ const struct mesh_config default_mesh_config = {
 	.dot11MeshForwarding = true,
 	.rssi_threshold = MESH_RSSI_THRESHOLD,
 	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
+	.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
+	.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
+	.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
 };
 
 const struct mesh_setup default_mesh_setup = {
+	/* cfg80211_join_mesh() will pick a channel if needed */
+	.channel = NULL,
+	.channel_type = NL80211_CHAN_NO_HT,
 	.sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
 	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
 	.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
@@ -75,7 +84,7 @@ const struct mesh_setup default_mesh_setup = {
 
 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 			 struct net_device *dev,
-			 const struct mesh_setup *setup,
+			 struct mesh_setup *setup,
 			 const struct mesh_config *conf)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -101,10 +110,61 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	if (!rdev->ops->join_mesh)
 		return -EOPNOTSUPP;
 
+	if (!setup->channel) {
+		/* if no channel explicitly given, use preset channel */
+		setup->channel = wdev->preset_chan;
+		setup->channel_type = wdev->preset_chantype;
+	}
+
+	if (!setup->channel) {
+		/* if we don't have that either, use the first usable channel */
+		enum ieee80211_band band;
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			struct ieee80211_supported_band *sband;
+			struct ieee80211_channel *chan;
+			int i;
+
+			sband = rdev->wiphy.bands[band];
+			if (!sband)
+				continue;
+
+			for (i = 0; i < sband->n_channels; i++) {
+				chan = &sband->channels[i];
+				if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
+						   IEEE80211_CHAN_PASSIVE_SCAN |
+						   IEEE80211_CHAN_DISABLED |
+						   IEEE80211_CHAN_RADAR))
+					continue;
+				setup->channel = chan;
+				break;
+			}
+
+			if (setup->channel)
+				break;
+		}
+
+		/* no usable channel ... */
+		if (!setup->channel)
+			return -EINVAL;
+
+		setup->channel_type = NL80211_CHAN_NO_HT;
+	}
+
+	if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel,
+					  setup->channel_type))
+		return -EINVAL;
+
+	err = cfg80211_can_use_chan(rdev, wdev, setup->channel,
+				    CHAN_MODE_SHARED);
+	if (err)
+		return err;
+
 	err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
 	if (!err) {
 		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
 		wdev->mesh_id_len = setup->mesh_id_len;
+		wdev->channel = setup->channel;
 	}
 
 	return err;
@@ -112,19 +172,71 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 
 int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 		       struct net_device *dev,
-		       const struct mesh_setup *setup,
+		       struct mesh_setup *setup,
 		       const struct mesh_config *conf)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err;
 
+	mutex_lock(&rdev->devlist_mtx);
 	wdev_lock(wdev);
 	err = __cfg80211_join_mesh(rdev, dev, setup, conf);
 	wdev_unlock(wdev);
+	mutex_unlock(&rdev->devlist_mtx);
 
 	return err;
 }
 
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+			   struct wireless_dev *wdev, int freq,
+			   enum nl80211_channel_type channel_type)
+{
+	struct ieee80211_channel *channel;
+	int err;
+
+	channel = rdev_freq_to_chan(rdev, freq, channel_type);
+	if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
+						      channel,
+						      channel_type)) {
+		return -EINVAL;
+	}
+
+	/*
+	 * Workaround for libertas (only!), it puts the interface
+	 * into mesh mode but doesn't implement join_mesh. Instead,
+	 * it is configured via sysfs and then joins the mesh when
+	 * you set the channel. Note that the libertas mesh isn't
+	 * compatible with 802.11 mesh.
+	 */
+	if (rdev->ops->libertas_set_mesh_channel) {
+		if (channel_type != NL80211_CHAN_NO_HT)
+			return -EINVAL;
+
+		if (!netif_running(wdev->netdev))
+			return -ENETDOWN;
+
+		err = cfg80211_can_use_chan(rdev, wdev, channel,
+					    CHAN_MODE_SHARED);
+		if (err)
+			return err;
+
+		err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
+							   wdev->netdev,
+							   channel);
+		if (!err)
+			wdev->channel = channel;
+
+		return err;
+	}
+
+	if (wdev->mesh_id_len)
+		return -EBUSY;
+
+	wdev->preset_chan = channel;
+	wdev->preset_chantype = channel_type;
+	return 0;
+}
+
 void cfg80211_notify_new_peer_candidate(struct net_device *dev,
 		const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
 {
@@ -156,8 +268,11 @@ static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 		return -ENOTCONN;
 
 	err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
-	if (!err)
+	if (!err) {
 		wdev->mesh_id_len = 0;
+		wdev->channel = NULL;
+	}
+
 	return err;
 }