Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

4 files changed, 16 insertions, 24 deletions

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 6886601afe1..a6cda52ed92 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1096,11 +1096,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 	int err;
 
 	/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+			    24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
 	if (!skb)
 		return;
 
-	skb_reserve(skb, local->hw.extra_tx_headroom);
+	skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
 
 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
 	memset(mgmt, 0, 24 + 6);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index e9afbf10e75..7e3a3cef7df 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start)
 	if (end >= start)
 		return jiffies_to_msecs(end - start);
 
-	return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+	return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
 }
 
 void
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ba4f1723c83..6668daf6932 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		}
 		CMD(start_p2p_device, START_P2P_DEVICE);
 		CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+		CMD(testmode_cmd, TESTMODE);
+#endif
 		if (state->split) {
 			CMD(crit_proto_start, CRIT_PROTOCOL_START);
 			CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
 			if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
 				CMD(channel_switch, CHANNEL_SWITCH);
+			CMD(set_qos_map, SET_QOS_MAP);
 		}
-		CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
-		CMD(testmode_cmd, TESTMODE);
-#endif
-
+		/* add into the if now */
 #undef CMD
 
 		if (rdev->ops->connect || rdev->ops->auth) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 558b0e3a02d..1afdf45db38 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
 		if (!band_rule_found)
 			band_rule_found = freq_in_rule_band(fr, center_freq);
 
-		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
 
 		if (band_rule_found && bw_fits)
 			return rr;
@@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
 }
 #endif
 
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
  */
 static void handle_channel(struct wiphy *wiphy,
 			   enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))