Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)
  ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
  ALSA: hda - Fix the lost power-setup of seconary pins after PM resume
  ALSA: usb-audio: add Yamaha MOX6/MOX8 support
  ALSA: virtuoso: add S/PDIF input support for all Xonars
  ALSA: ice1724 - Support for ooAoo SQ210a
  ALSA: ice1724 - Allow card info based on model only
  ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations
  ALSA: hdspm - Provide unique driver id based on card serial
  ASoC: Dynamically allocate the rtd device for a non-empty release()
  ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC
  ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
  ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
  ALSA: hda - Use auto-parser for HP laptops with cx20459 codec
  ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()
  ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()
  ALSA: hda/cirrus - support for iMac12,2 model
  ASoC: cx20442: add bias control over a platform provided regulator
  ALSA: usb-audio - Avoid flood of frame-active debug messages
  ALSA: snd-usb-us122l: Delete calls to preempt_disable
  mfd: Put WM8994 into cache only mode when suspending
  ...

Fix up trivial conflicts in:
 - arch/arm/mach-s3c64xx/mach-crag6410.c:
	renamed speyside_wm8962 to tobermory, added littlemill right
	next to it
 - drivers/base/regmap/{regcache.c,regmap.c}:
	duplicate diff that had already come in with other changes in
	the regmap tree

1 files changed, 6 insertions, 15 deletions

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index f6b6551940a..d7bd9183161 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -16,7 +16,6 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/clk.h>
-#include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
@@ -923,7 +922,7 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
 			SNDRV_PCM_FMTBIT_S24_LE |\
 			SNDRV_PCM_FMTBIT_S32_LE)
 
-static struct snd_soc_dai_ops sgtl5000_ops = {
+static const struct snd_soc_dai_ops sgtl5000_ops = {
 	.hw_params = sgtl5000_pcm_hw_params,
 	.digital_mute = sgtl5000_digital_mute,
 	.set_fmt = sgtl5000_set_dai_fmt,
@@ -968,7 +967,7 @@ static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
 }
 
 #ifdef CONFIG_SUSPEND
-static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
+static int sgtl5000_suspend(struct snd_soc_codec *codec)
 {
 	sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
@@ -1077,7 +1076,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 	/* according to datasheet, maximum voltage of supplies */
 	if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
 		dev_err(codec->dev,
-			"exceed max voltage vdda %dmv vddio %dma vddd %dma\n",
+			"exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
 			vdda, vddio, vddd);
 
 		return -EINVAL;
@@ -1402,7 +1401,8 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
 	struct sgtl5000_priv *sgtl5000;
 	int ret;
 
-	sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
+	sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
+								GFP_KERNEL);
 	if (!sgtl5000)
 		return -ENOMEM;
 
@@ -1410,22 +1410,13 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
 
 	ret = snd_soc_register_codec(&client->dev,
 			&sgtl5000_driver, &sgtl5000_dai, 1);
-	if (ret) {
-		dev_err(&client->dev, "Failed to register codec: %d\n", ret);
-		kfree(sgtl5000);
-		return ret;
-	}
-
-	return 0;
+	return ret;
 }
 
 static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
 {
-	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
-
 	snd_soc_unregister_codec(&client->dev);
 
-	kfree(sgtl5000);
 	return 0;
 }