Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver patches from Greg KH:
 "Here's the big driver misc / char pull request for 3.17-rc1.

  Lots of things in here, the thunderbolt support for Apple laptops,
  some other new drivers, testing fixes, and other good things.  All
  have been in linux-next for a long time"

* tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits)
  misc: bh1780: Introduce the use of devm_kzalloc
  Lattice ECP3 FPGA: Correct endianness
  drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  dt-bindings: extcon: Add support for SM5502 MUIC device
  extcon: sm5502: Change internal hardware switch according to cable type
  extcon: sm5502: Detect cable state after completing platform booting
  extcon: sm5502: Add support new SM5502 extcon device driver
  extcon: arizona: Get MICVDD against extcon device
  extcon: Remove unnecessary OOM messages
  misc: vexpress: Fix sparse non static symbol warnings
  mei: drop unused hw dependent fw status functions
  misc: bh1770glc: Use managed functions
  pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage
  misc: remove DEFINE_PCI_DEVICE_TABLE usage
  ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use
  drivers/char/dsp56k.c: drop check for negativity of unsigned parameter
  mei: fix return value on disconnect timeout
  mei: don't schedule suspend in pm idle
  mei: start disconnect request timer consistently
  mei: reset client connection state on timeout
  ...

11 files changed, 145 insertions, 35 deletions

diff --git a/tools/hv/hv_fcopy_daemon.c b/tools/hv/hv_fcopy_daemon.c
index fba1c75aa48..8f96b3ee072 100644
--- a/tools/hv/hv_fcopy_daemon.c
+++ b/tools/hv/hv_fcopy_daemon.c
@@ -88,7 +88,8 @@ static int hv_start_fcopy(struct hv_start_fcopy *smsg)
 		}
 	}
 
-	target_fd = open(target_fname, O_RDWR | O_CREAT | O_CLOEXEC, 0744);
+	target_fd = open(target_fname,
+			 O_RDWR | O_CREAT | O_TRUNC | O_CLOEXEC, 0744);
 	if (target_fd == -1) {
 		syslog(LOG_INFO, "Open Failed: %s", strerror(errno));
 		goto done;
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index e66e710cc59..4c2aa357e12 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -12,6 +12,9 @@ TARGETS += powerpc
 TARGETS += user
 TARGETS += sysctl
 
+TARGETS_HOTPLUG = cpu-hotplug
+TARGETS_HOTPLUG += memory-hotplug
+
 all:
 	for TARGET in $(TARGETS); do \
 		make -C $$TARGET; \
@@ -22,6 +25,21 @@ run_tests: all
 		make -C $$TARGET run_tests; \
 	done;
 
+hotplug:
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET; \
+	done;
+
+run_hotplug: hotplug
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET run_full_test; \
+	done;
+
+clean_hotplug:
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET clean; \
+	done;
+
 clean:
 	for TARGET in $(TARGETS); do \
 		make -C $$TARGET clean; \
diff --git a/tools/testing/selftests/README.txt b/tools/testing/selftests/README.txt
index 5e2faf9c55d..2660d5ff917 100644
--- a/tools/testing/selftests/README.txt
+++ b/tools/testing/selftests/README.txt
@@ -4,8 +4,15 @@ The kernel contains a set of "self tests" under the tools/testing/selftests/
 directory. These are intended to be small unit tests to exercise individual
 code paths in the kernel.
 
-Running the selftests
-=====================
+On some systems, hot-plug tests could hang forever waiting for cpu and
+memory to be ready to be offlined. A special hot-plug target is created
+to run full range of hot-plug tests. In default mode, hot-plug tests run
+in safe mode with a limited scope. In limited mode, cpu-hotplug test is
+run on a single cpu as opposed to all hotplug capable cpus, and memory
+hotplug test is run on 2% of hotplug capable memory instead of 10%.
+
+Running the selftests (hotplug tests are run in limited mode)
+=============================================================
 
 To build the tests:
 
@@ -18,14 +25,26 @@ To run the tests:
 
 - note that some tests will require root privileges.
 
-
-To run only tests targetted for a single subsystem:
+To run only tests targeted for a single subsystem: (including
+hotplug targets in limited mode)
 
   $  make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests
 
 See the top-level tools/testing/selftests/Makefile for the list of all possible
 targets.
 
+Running the full range hotplug selftests
+========================================
+
+To build the tests:
+
+  $ make -C tools/testing/selftests hotplug
+
+To run the tests:
+
+  $ make -C tools/testing/selftests run_hotplug
+
+- note that some tests will require root privileges.
 
 Contributing new tests
 ======================
diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile
index 790c23a9db4..e9c28d8dc84 100644
--- a/tools/testing/selftests/cpu-hotplug/Makefile
+++ b/tools/testing/selftests/cpu-hotplug/Makefile
@@ -3,4 +3,7 @@ all:
 run_tests:
 	@/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]"
 
+run_full_test:
+	@/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
+
 clean:
diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/on-off-test.sh
index bdde7cf428b..98b1d6565f2 100644
--- a/tools/testing/selftests/cpu-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/on-off-test.sh
@@ -11,6 +11,8 @@ prerequisite()
 		exit 0
 	fi
 
+	taskset -p 01 $$
+
 	SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
 
 	if [ ! -d "$SYSFS" ]; then
@@ -22,6 +24,19 @@ prerequisite()
 		echo $msg cpu hotplug is not supported >&2
 		exit 0
 	fi
+
+	echo "CPU online/offline summary:"
+	online_cpus=`cat $SYSFS/devices/system/cpu/online`
+	online_max=${online_cpus##*-}
+	echo -e "\t Cpus in online state: $online_cpus"
+
+	offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
+	if [[ "a$offline_cpus" = "a" ]]; then
+		offline_cpus=0
+	else
+		offline_max=${offline_cpus##*-}
+	fi
+	echo -e "\t Cpus in offline state: $offline_cpus"
 }
 
 #
@@ -113,15 +128,25 @@ offline_cpu_expect_fail()
 }
 
 error=-12
+allcpus=0
 priority=0
+online_cpus=0
+online_max=0
+offline_cpus=0
+offline_max=0
 
-while getopts e:hp: opt; do
+while getopts e:ahp: opt; do
 	case $opt in
 	e)
 		error=$OPTARG
 		;;
+	a)
+		allcpus=1
+		;;
 	h)
-		echo "Usage $0 [ -e errno ] [ -p notifier-priority ]"
+		echo "Usage $0 [ -a ] [ -e errno ] [ -p notifier-priority ]"
+		echo -e "\t default offline one cpu"
+		echo -e "\t run with -a option to offline all cpus"
 		exit
 		;;
 	p)
@@ -138,6 +163,29 @@ fi
 prerequisite
 
 #
+# Safe test (default) - offline and online one cpu
+#
+if [ $allcpus -eq 0 ]; then
+	echo "Limited scope test: one hotplug cpu"
+	echo -e "\t (leaves cpu in the original state):"
+	echo -e "\t online to offline to online: cpu $online_max"
+	offline_cpu_expect_success $online_max
+	online_cpu_expect_success $online_max
+
+	if [[ $offline_cpus -gt 0 ]]; then
+		echo -e "\t offline to online to offline: cpu $offline_max"
+		online_cpu_expect_success $offline_max
+		offline_cpu_expect_success $offline_max
+	fi
+	exit 0
+else
+	echo "Full scope test: all hotplug cpus"
+	echo -e "\t online all offline cpus"
+	echo -e "\t offline all online cpus"
+	echo -e "\t online all offline cpus"
+fi
+
+#
 # Online all hot-pluggable CPUs
 #
 for cpu in `hotplaggable_offline_cpus`; do
diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c
index fa4f1b37e04..dbba4084869 100644
--- a/tools/testing/selftests/kcmp/kcmp_test.c
+++ b/tools/testing/selftests/kcmp/kcmp_test.c
@@ -81,7 +81,7 @@ int main(int argc, char **argv)
 		/* Compare with self */
 		ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0);
 		if (ret) {
-			printf("FAIL: 0 expected but %li returned (%s)\n",
+			printf("FAIL: 0 expected but %d returned (%s)\n",
 				ret, strerror(errno));
 			ret = -1;
 		} else
diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile
index 058c76f5d10..d46b8d489cd 100644
--- a/tools/testing/selftests/memory-hotplug/Makefile
+++ b/tools/testing/selftests/memory-hotplug/Makefile
@@ -1,6 +1,9 @@
 all:
 
 run_tests:
+	@/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]"
+
+run_full_test:
 	@/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
 
 clean:
diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/on-off-test.sh
index a2816f63154..6cddde0b96f 100644
--- a/tools/testing/selftests/memory-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/memory-hotplug/on-off-test.sh
@@ -142,10 +142,16 @@ fi
 
 prerequisite
 
+echo "Test scope: $ratio% hotplug memory"
+echo -e "\t online all hotplug memory in offline state"
+echo -e "\t offline $ratio% hotplug memory in online state"
+echo -e "\t online all hotplug memory in offline state"
+
 #
 # Online all hot-pluggable memory
 #
 for memory in `hotplaggable_offline_memory`; do
+	echo offline-online $memory
 	online_memory_expect_success $memory
 done
 
@@ -154,6 +160,7 @@ done
 #
 for memory in `hotpluggable_online_memory`; do
 	if [ $((RANDOM % 100)) -lt $ratio ]; then
+		echo online-offline $memory
 		offline_memory_expect_success $memory
 	fi
 done
@@ -162,6 +169,7 @@ done
 # Online all hot-pluggable memory again
 #
 for memory in `hotplaggable_offline_memory`; do
+	echo offline-online $memory
 	online_memory_expect_success $memory
 done
 
diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile
index 218a122c795..8056e2e68fa 100644
--- a/tools/testing/selftests/mqueue/Makefile
+++ b/tools/testing/selftests/mqueue/Makefile
@@ -1,6 +1,6 @@
 all:
-	gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
-	gcc -O2 -lrt -lpthread -lpopt -o mq_perf_tests mq_perf_tests.c
+	gcc -O2 mq_open_tests.c -o mq_open_tests -lrt
+	gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
 
 run_tests:
 	@./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]"
diff --git a/tools/testing/selftests/mqueue/mq_open_tests.c b/tools/testing/selftests/mqueue/mq_open_tests.c
index 711cc292304..9c1a5d35905 100644
--- a/tools/testing/selftests/mqueue/mq_open_tests.c
+++ b/tools/testing/selftests/mqueue/mq_open_tests.c
@@ -80,7 +80,8 @@ void shutdown(int exit_val, char *err_cause, int line_no)
 	if (in_shutdown++)
 		return;
 
-	seteuid(0);
+	if (seteuid(0) == -1)
+		perror("seteuid() failed");
 
 	if (queue != -1)
 		if (mq_close(queue))
@@ -292,8 +293,10 @@ int main(int argc, char *argv[])
 	/* Tell the user our initial state */
 	printf("\nInitial system state:\n");
 	printf("\tUsing queue path:\t\t%s\n", queue_path);
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", saved_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n",
+		(long) saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n",
+		(long) saved_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs);
 	if (default_settings) {
@@ -308,8 +311,8 @@ int main(int argc, char *argv[])
 	validate_current_settings();
 
 	printf("Adjusted system state for testing:\n");
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", cur_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", cur_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", (long) cur_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", (long) cur_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs);
 	if (default_settings) {
@@ -454,7 +457,12 @@ int main(int argc, char *argv[])
 	else
 		printf("Queue open with total size > 2GB when euid = 0 "
 		       "failed:\t\t\tPASS\n");
-	seteuid(99);
+
+	if (seteuid(99) == -1) {
+		perror("seteuid() failed");
+		exit(1);
+	}
+
 	attr.mq_maxmsg = cur_max_msgs;
 	attr.mq_msgsize = cur_max_msgsize;
 	if (test_queue_fail(&attr, &result))
diff --git a/tools/testing/selftests/mqueue/mq_perf_tests.c b/tools/testing/selftests/mqueue/mq_perf_tests.c
index 2fadd4b9704..94dae65eea4 100644
--- a/tools/testing/selftests/mqueue/mq_perf_tests.c
+++ b/tools/testing/selftests/mqueue/mq_perf_tests.c
@@ -296,9 +296,9 @@ static inline void open_queue(struct mq_attr *attr)
 	printf("\n\tQueue %s created:\n", queue_path);
 	printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ?
 	       "O_NONBLOCK" : "(null)");
-	printf("\t\tmq_maxmsg:\t\t\t%d\n", result.mq_maxmsg);
-	printf("\t\tmq_msgsize:\t\t\t%d\n", result.mq_msgsize);
-	printf("\t\tmq_curmsgs:\t\t\t%d\n", result.mq_curmsgs);
+	printf("\t\tmq_maxmsg:\t\t\t%lu\n", result.mq_maxmsg);
+	printf("\t\tmq_msgsize:\t\t\t%lu\n", result.mq_msgsize);
+	printf("\t\tmq_curmsgs:\t\t\t%lu\n", result.mq_curmsgs);
 }
 
 void *fake_cont_thread(void *arg)
@@ -440,7 +440,7 @@ void *perf_test_thread(void *arg)
 		shutdown(2, "clock_getres()", __LINE__);
 
 	printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max);
-	printf("\t\tClock resolution:\t\t%d nsec%s\n", res.tv_nsec,
+	printf("\t\tClock resolution:\t\t%lu nsec%s\n", res.tv_nsec,
 	       res.tv_nsec > 1 ? "s" : "");
 
 
@@ -454,20 +454,20 @@ void *perf_test_thread(void *arg)
 	recv_total.tv_nsec = 0;
 	for (i = 0; i < TEST1_LOOPS; i++)
 		do_send_recv();
-	printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+	printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
 	       send_total.tv_sec, send_total.tv_nsec);
 	nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
 		 send_total.tv_nsec) / TEST1_LOOPS;
-	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
-	printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+	printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+	printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
 	       recv_total.tv_sec, recv_total.tv_nsec);
 	nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
 		recv_total.tv_nsec) / TEST1_LOOPS;
-	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+	printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
 
 
 	for (cur_test = test2; cur_test->desc != NULL; cur_test++) {
-		printf(cur_test->desc);
+		printf("%s:\n", cur_test->desc);
 		printf("\t\t(%d iterations)\n", TEST2_LOOPS);
 		prio_out = 0;
 		send_total.tv_sec = 0;
@@ -493,16 +493,16 @@ void *perf_test_thread(void *arg)
 			cur_test->func(&prio_out);
 		}
 		printf("done.\n");
-		printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+		printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
 		       send_total.tv_sec, send_total.tv_nsec);
 		nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
 			 send_total.tv_nsec) / TEST2_LOOPS;
-		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
-		printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+		printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+		printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
 		       recv_total.tv_sec, recv_total.tv_nsec);
 		nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
 			recv_total.tv_nsec) / TEST2_LOOPS;
-		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+		printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
 		printf("\t\tDraining queue...");
 		fflush(stdout);
 		clock_gettime(clock, &start);
@@ -653,8 +653,10 @@ int main(int argc, char *argv[])
 	/* Tell the user our initial state */
 	printf("\nInitial system state:\n");
 	printf("\tUsing queue path:\t\t\t%s\n", queue_path);
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", saved_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", saved_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+		(long) saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+		(long) saved_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs);
 	printf("\tNice value:\t\t\t\t%d\n", cur_nice);
@@ -667,10 +669,10 @@ int main(int argc, char *argv[])
 		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n");
 		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n");
 	} else {
-		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n",
-		       cur_limits.rlim_cur);
-		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n",
-		       cur_limits.rlim_max);
+		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+		       (long) cur_limits.rlim_cur);
+		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+		       (long) cur_limits.rlim_max);
 	}
 	printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs);