diff options
41 files changed, 508 insertions, 196 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ba997577150..ff3e5bec1c2 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. </para> <para> - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - </para> - <para> This entry may be specified as NULL in ata_port_operations. </para> @@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in <sect2><title>Taskfile read/write</title> <programlisting> -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> @@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. </para> </sect2> <sect2><title>PIO data read/write</title> <programlisting> -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); </programlisting> <para> All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). </para> </sect2> <sect2><title>ATA command execute</title> <programlisting> -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. </para> @@ -218,8 +213,8 @@ command. <sect2><title>Read specific ATA shadow registers</title> <programlisting> -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); </programlisting> <para> @@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - </para> - <para> - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. </para> </sect2> <sect2><title>Select ATA device on bus</title> <programlisting> -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); </programlisting> <para> @@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); </para> <para> Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. </para> </sect2> @@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. </para> <para> - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). </para> <para> - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. </para> @@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); data from port at this time. </para> <para> - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - </para> - <para> ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index a10c3b6ba7c..56941ae1f5d 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -333,14 +333,14 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - x15 x14 x13 x12 x11 x10 x9 x8 + . . . . . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x4 x2 x1 x0 - x15..x0 = absolute x value (horizontal) + x10..x0 = absolute x value (horizontal) byte 3: @@ -350,14 +350,14 @@ byte 3: byte 4: bit 7 6 5 4 3 2 1 0 - y15 y14 y13 y12 y11 y10 y8 y8 + . . . . . . y9 y8 byte 5: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 - y15..y0 = absolute y value (vertical) + y9..y0 = absolute y value (vertical) 4.2.2 Two finger touch diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 943f2abac9b..ce038d861eb 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -324,6 +324,7 @@ struct dma_async_tx_descriptor * async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, struct page **blocks, struct async_submit_ctl *submit) { + void *scribble = submit->scribble; int non_zero_srcs, i; BUG_ON(faila == failb); @@ -332,11 +333,13 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); - /* we need to preserve the contents of 'blocks' for the async - * case, so punt to synchronous if a scribble buffer is not available + /* if a dma resource is not available or a scribble buffer is not + * available punt to the synchronous path. In the 'dma not + * available' case be sure to use the scribble buffer to + * preserve the content of 'blocks' as the caller intended. */ - if (!submit->scribble) { - void **ptrs = (void **) blocks; + if (!async_dma_find_channel(DMA_PQ) || !scribble) { + void **ptrs = scribble ? scribble : (void **) blocks; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) @@ -406,11 +409,13 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); - /* we need to preserve the contents of 'blocks' for the async - * case, so punt to synchronous if a scribble buffer is not available + /* if a dma resource is not available or a scribble buffer is not + * available punt to the synchronous path. In the 'dma not + * available' case be sure to use the scribble buffer to + * preserve the content of 'blocks' as the caller intended. */ - if (!scribble) { - void **ptrs = (void **) blocks; + if (!async_dma_find_channel(DMA_PQ) || !scribble) { + void **ptrs = scribble ? scribble : (void **) blocks; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 4164dd244dd..d94b8f0bd74 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index defce2877ee..b85450865ff 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c52bec4d053..423e0e6031a 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -929,6 +929,24 @@ static const struct input_device_id joydev_ids[] = { .evbit = { BIT_MASK(EV_ABS) }, .absbit = { BIT_MASK(ABS_THROTTLE) }, }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) }, + }, { } /* Terminating entry */ }; diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c index 614b65d78fe..e8bbc619f6d 100644 --- a/drivers/input/misc/ati_remote.c +++ b/drivers/input/misc/ati_remote.c @@ -98,10 +98,12 @@ * Module and Version Information, Module Parameters */ -#define ATI_REMOTE_VENDOR_ID 0x0bc7 -#define ATI_REMOTE_PRODUCT_ID 0x004 -#define LOLA_REMOTE_PRODUCT_ID 0x002 -#define MEDION_REMOTE_PRODUCT_ID 0x006 +#define ATI_REMOTE_VENDOR_ID 0x0bc7 +#define LOLA_REMOTE_PRODUCT_ID 0x0002 +#define LOLA2_REMOTE_PRODUCT_ID 0x0003 +#define ATI_REMOTE_PRODUCT_ID 0x0004 +#define NVIDIA_REMOTE_PRODUCT_ID 0x0005 +#define MEDION_REMOTE_PRODUCT_ID 0x0006 #define DRIVER_VERSION "2.2.1" #define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>" @@ -142,8 +144,10 @@ MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec #define err(format, arg...) printk(KERN_ERR format , ## arg) static struct usb_device_id ati_remote_table[] = { - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) }, { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, {} /* Terminating entry */ }; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 0d22cb9ce42..99d58764ef0 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -64,7 +64,6 @@ static const struct alps_model_info alps_model_data[] = { { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ - { { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, /* HP Pavilion dm3 */ { { 0x52, 0x01, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ }; diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index a138b5da79f..0520c2e1992 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -25,6 +25,10 @@ printk(KERN_DEBUG format, ##arg); \ } while (0) +static bool force_elantech; +module_param_named(force_elantech, force_elantech, bool, 0644); +MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default)."); + /* * Send a Synaptics style sliced query command */ @@ -182,13 +186,17 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) static int old_fingers; if (etd->fw_version_maj == 0x01) { - /* byte 0: D U p1 p2 1 p3 R L - byte 1: f 0 th tw x9 x8 y9 y8 */ + /* + * byte 0: D U p1 p2 1 p3 R L + * byte 1: f 0 th tw x9 x8 y9 y8 + */ fingers = ((packet[1] & 0x80) >> 7) + ((packet[1] & 0x30) >> 4); } else { - /* byte 0: n1 n0 p2 p1 1 p3 R L - byte 1: 0 0 0 0 x9 x8 y9 y8 */ + /* + * byte 0: n1 n0 p2 p1 1 p3 R L + * byte 1: 0 0 0 0 x9 x8 y9 y8 + */ fingers = (packet[0] & 0xc0) >> 6; } @@ -202,13 +210,15 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_key(dev, BTN_TOUCH, fingers != 0); - /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 - byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */ + /* + * byte 2: x7 x6 x5 x4 x3 x2 x1 x0 + * byte 3: y7 y6 y5 y4 y3 y2 y1 y0 + */ if (fingers) { input_report_abs(dev, ABS_X, ((packet[1] & 0x0c) << 6) | packet[2]); - input_report_abs(dev, ABS_Y, ETP_YMAX_V1 - - (((packet[1] & 0x03) << 8) | packet[3])); + input_report_abs(dev, ABS_Y, + ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3])); } input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); @@ -247,34 +257,47 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) switch (fingers) { case 1: - /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8 - byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ - input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]); - /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8 - byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ - input_report_abs(dev, ABS_Y, ETP_YMAX_V2 - - ((packet[4] << 8) | packet[5])); + /* + * byte 1: . . . . . x10 x9 x8 + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 + */ + input_report_abs(dev, ABS_X, + ((packet[1] & 0x07) << 8) | packet[2]); + /* + * byte 4: . . . . . . y9 y8 + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 + */ + input_report_abs(dev, ABS_Y, + ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5])); break; case 2: - /* The coordinate of each finger is reported separately with - a lower resolution for two finger touches */ - /* byte 0: . . ay8 ax8 . . . . - byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ + /* + * The coordinate of each finger is reported separately + * with a lower resolution for two finger touches: + * byte 0: . . ay8 ax8 . . . . + * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 + */ x1 = ((packet[0] & 0x10) << 4) | packet[1]; /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); - /* byte 3: . . by8 bx8 . . . . - byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ + /* + * byte 3: . . by8 bx8 . . . . + * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 + */ x2 = ((packet[3] & 0x10) << 4) | packet[4]; /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); - /* For compatibility with the X Synaptics driver scale up one - coordinate and report as ordinary mouse movent */ + /* + * For compatibility with the X Synaptics driver scale up + * one coordinate and report as ordinary mouse movent + */ input_report_abs(dev, ABS_X, x1 << 2); input_report_abs(dev, ABS_Y, y1 << 2); - /* For compatibility with the proprietary X Elantech driver - report both coordinates as hat coordinates */ + /* + * For compatibility with the proprietary X Elantech driver + * report both coordinates as hat coordinates + */ input_report_abs(dev, ABS_HAT0X, x1); input_report_abs(dev, ABS_HAT0Y, y1); input_report_abs(dev, ABS_HAT1X, x2); @@ -596,8 +619,12 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) param[0], param[1], param[2]); if (param[0] == 0 || param[1] != 0) { - pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n"); - return -1; + if (!force_elantech) { + pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n"); + return -1; + } + + pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n"); } if (set_properties) { @@ -666,7 +693,8 @@ int elantech_init(struct psmouse *psmouse) * Assume every version greater than this is new EeePC style * hardware with 6 byte packets */ - if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) { + if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) || + etd->fw_version_maj > 0x02) { etd->hw_version = 2; /* For now show extra debug information */ etd->debug = 1; diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index d8c0c8d6992..cbc80726494 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -110,6 +110,7 @@ static struct workqueue_struct *kpsmoused_wq; struct psmouse_protocol { enum psmouse_type type; bool maxproto; + bool ignore_parity; /* Protocol should ignore parity errors from KBC */ const char *name; const char *alias; int (*detect)(struct psmouse *, bool); @@ -288,7 +289,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, if (psmouse->state == PSMOUSE_IGNORE) goto out; - if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) { + if (unlikely((flags & SERIO_TIMEOUT) || + ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) { + if (psmouse->state == PSMOUSE_ACTIVATED) printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n", flags & SERIO_TIMEOUT ? " timeout" : "", @@ -759,6 +762,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "PS/2", .alias = "bare", .maxproto = true, + .ignore_parity = true, .detect = ps2bare_detect, }, #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP @@ -786,6 +790,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "ImPS/2", .alias = "imps", .maxproto = true, + .ignore_parity = true, .detect = intellimouse_detect, }, { @@ -793,6 +798,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "ImExPS/2", .alias = "exps", .maxproto = true, + .ignore_parity = true, .detect = im_explorer_detect, }, #ifdef CONFIG_MOUSE_PS2_SYNAPTICS @@ -1222,6 +1228,7 @@ static void psmouse_disconnect(struct serio *serio) static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse_protocol *proto) { + const struct psmouse_protocol *selected_proto; struct input_dev *input_dev = psmouse->dev; input_dev->dev.parent = &psmouse->ps2dev.serio->dev; @@ -1245,9 +1252,14 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, return -1; psmouse->type = proto->type; - } else + selected_proto = proto; + } else { psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, true); + selected_proto = psmouse_protocol_by_type(psmouse->type); + } + + psmouse->ignore_parity = selected_proto->ignore_parity; /* * If mouse's packet size is 3 there is no point in polling the @@ -1267,7 +1279,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, psmouse->resync_time = 0; snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s", - psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name); + selected_proto->name, psmouse->vendor, psmouse->name); input_dev->name = psmouse->devname; input_dev->phys = psmouse->phys; diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index e053bdd137f..593e910bfc7 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -47,6 +47,7 @@ struct psmouse { unsigned char pktcnt; unsigned char pktsize; unsigned char type; + bool ignore_parity; bool acks_disable_command; unsigned int model; unsigned long last; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 026df601016..ebd7a99efea 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -137,7 +137,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap)) return -1; priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2]; - priv->ext_cap = 0; + priv->ext_cap = priv->ext_cap_0c = 0; + if (!SYN_CAP_VALID(priv->capabilities)) return -1; @@ -150,7 +151,7 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) { printk(KERN_ERR "Synaptics claims to have extended capabilities," - " but I'm not able to read them."); + " but I'm not able to read them.\n"); } else { priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2]; @@ -162,6 +163,16 @@ static int synaptics_capability(struct psmouse *psmouse) priv->ext_cap &= 0xff0fff; } } + + if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) { + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) { + printk(KERN_ERR "Synaptics claims to have extended capability 0x0c," + " but I'm not able to read it.\n"); + } else { + priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2]; + } + } + return 0; } @@ -348,7 +359,15 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data hw->left = (buf[0] & 0x01) ? 1 : 0; hw->right = (buf[0] & 0x02) ? 1 : 0; - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { + if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + /* + * Clickpad's button is transmitted as middle button, + * however, since it is primary button, we will report + * it as BTN_LEFT. + */ + hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; + + } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; if (hw->w == 2) hw->scroll = (signed char)(buf[1]); @@ -593,6 +612,12 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) dev->absres[ABS_X] = priv->x_res; dev->absres[ABS_Y] = priv->y_res; + + if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + /* Clickpads report only left button */ + __clear_bit(BTN_RIGHT, dev->keybit); + __clear_bit(BTN_MIDDLE, dev->keybit); + } } static void synaptics_disconnect(struct psmouse *psmouse) @@ -697,10 +722,10 @@ int synaptics_init(struct psmouse *psmouse) priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n", + printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n", SYN_ID_MODEL(priv->identity), SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), - priv->model_id, priv->capabilities, priv->ext_cap); + priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c); set_input_params(psmouse->dev, priv); diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index f0f40a331dc..ae37c5d162a 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -18,6 +18,7 @@ #define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07 #define SYN_QUE_RESOLUTION 0x08 #define SYN_QUE_EXT_CAPAB 0x09 +#define SYN_QUE_EXT_CAPAB_0C 0x0c /* synatics modes */ #define SYN_BIT_ABSOLUTE_MODE (1 << 7) @@ -48,6 +49,8 @@ #define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47) #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) +#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) +#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) @@ -96,6 +99,7 @@ struct synaptics_data { unsigned long int model_id; /* Model-ID */ unsigned long int capabilities; /* Capabilities */ unsigned long int ext_cap; /* Extended Capabilities */ + unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ unsigned long int identity; /* Identification */ int x_res; /* X resolution in units/mm */ int y_res; /* Y resolution in units/mm */ diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 204b8a1a601..75f8b73010f 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -124,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int eeti_ts_open(struct input_dev *dev) +static void eeti_ts_start(struct eeti_ts_priv *priv) { - struct eeti_ts_priv *priv = input_get_drvdata(dev); - enable_irq(priv->irq); /* Read the events once to arm the IRQ */ eeti_ts_read(&priv->work); +} + +static void eeti_ts_stop(struct eeti_ts_priv *priv) +{ + disable_irq(priv->irq); + cancel_work_sync(&priv->work); +} + +static int eeti_ts_open(struct input_dev *dev) +{ + struct eeti_ts_priv *priv = input_get_drvdata(dev); + + eeti_ts_start(priv); return 0; } @@ -140,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev) { struct eeti_ts_priv *priv = input_get_drvdata(dev); - disable_irq(priv->irq); - cancel_work_sync(&priv->work); + eeti_ts_stop(priv); } static int __devinit eeti_ts_probe(struct i2c_client *client, @@ -153,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, unsigned int irq_flags; int err = -ENOMEM; - /* In contrast to what's described in the datasheet, there seems + /* + * In contrast to what's described in the datasheet, there seems * to be no way of probing the presence of that device using I2C * commands. So we need to blindly believe it is there, and wait - * for interrupts to occur. */ + * for interrupts to occur. + */ priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { @@ -212,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, goto err2; } - /* Disable the irq for now. It will be enabled once the input device - * is opened. */ - disable_irq(priv->irq); + /* + * Disable the device for now. It will be enabled once the + * input device is opened. + */ + eeti_ts_stop(priv); device_init_wakeup(&client->dev, 0); return 0; @@ -235,6 +249,12 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) struct eeti_ts_priv *priv = i2c_get_clientdata(client); free_irq(priv->irq, priv); + /* + * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it + * so that device still works if we reload the driver. + */ + enable_irq(priv->irq); + input_unregister_device(priv->input); i2c_set_clientdata(client, NULL); kfree(priv); @@ -246,6 +266,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_stop(priv); + + mutex_unlock(&input_dev->mutex); if (device_may_wakeup(&client->dev)) enable_irq_wake(priv->irq); @@ -256,10 +284,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) static int eeti_ts_resume(struct i2c_client *client) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; if (device_may_wakeup(&client->dev)) disable_irq_wake(priv->irq); + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_start(priv); + + mutex_unlock(&input_dev->mutex); + return 0; } #else diff --git a/drivers/mtd/internal.h b/drivers/mtd/internal.h deleted file mode 100644 index e69de29bb2d..00000000000 --- a/drivers/mtd/internal.h +++ /dev/null diff --git a/drivers/mtd/mtdbdi.c b/drivers/mtd/mtdbdi.c deleted file mode 100644 index e69de29bb2d..00000000000 --- a/drivers/mtd/mtdbdi.c +++ /dev/null diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 6995169d285..cd17d09f385 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -311,11 +311,6 @@ err: processed++; } - if (processed) { - wrw(ep, REG_RXDENQ, processed); - wrw(ep, REG_RXSTSENQ, processed); - } - return processed; } @@ -350,6 +345,11 @@ poll_some_more: goto poll_some_more; } + if (rx) { + wrw(ep, REG_RXDENQ, rx); + wrw(ep, REG_RXSTSENQ, rx); + } + return rx; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index fb8fc7d1b50..dbf81788bb4 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) reg16 &= ~state; pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + if (!pdev->bus->self) + return; + pos = pci_pcie_cap(pdev->bus->self); pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); reg16 &= ~state; diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 9f98c1c4a34..9b4e8f797a7 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p) (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), fep->hwp + FEC_ADDR_LOW); writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), - fep + FEC_ADDR_HIGH); + fep->hwp + FEC_ADDR_HIGH); return 0; } diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index fc5938ba3d7..a527e37728c 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -88,6 +88,11 @@ config LSI_ET1011C_PHY ---help--- Supports the LSI ET1011C PHY. +config MICREL_PHY + tristate "Driver for Micrel PHYs" + ---help--- + Supports the KSZ9021, VSC8201, KS8001 PHYs. + config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB=y diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1342585af38..13bebab65d0 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c new file mode 100644 index 00000000000..0cd80e4d71d --- /dev/null +++ b/drivers/net/phy/micrel.c @@ -0,0 +1,104 @@ +/* + * drivers/net/phy/micrel.c + * + * Driver for Micrel PHYs + * + * Author: David J. Choi + * + * Copyright (c) 2010 Micrel, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Support : ksz9021 , vsc8201, ks8001 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/phy.h> + +#define PHY_ID_KSZ9021 0x00221611 +#define PHY_ID_VSC8201 0x000FC413 +#define PHY_ID_KS8001 0x0022161A + + +static int kszphy_config_init(struct phy_device *phydev) +{ + return 0; +} + + +static struct phy_driver ks8001_driver = { + .phy_id = PHY_ID_KS8001, + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver vsc8201_driver = { + .phy_id = PHY_ID_VSC8201, + .name = "Micrel VSC8201", + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ksz9021_driver = { + .phy_id = PHY_ID_KSZ9021, + .phy_id_mask = 0x000fff10, + .name = "Micrel KSZ9021 Gigabit PHY", + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, +}; + +static int __init ksphy_init(void) +{ + int ret; + + ret = phy_driver_register(&ks8001_driver); + if (ret) + goto err1; + ret = phy_driver_register(&vsc8201_driver); + if (ret) + goto err2; + + ret = phy_driver_register(&ksz9021_driver); + if (ret) + goto err3; + return 0; + +err3: + phy_driver_unregister(&vsc8201_driver); +err2: + phy_driver_unregister(&ks8001_driver); +err1: + return ret; +} + +static void __exit ksphy_exit(void) +{ + phy_driver_unregister(&ks8001_driver); + phy_driver_unregister(&vsc8201_driver); + phy_driver_unregister(&ksz9021_driver); +} + +module_init(ksphy_init); +module_exit(ksphy_exit); + +MODULE_DESCRIPTION("Micrel PHY driver"); +MODULE_AUTHOR("David J. Choi"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 6e281bc825e..8518a2e58e5 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf, DECLARE_WAITQUEUE(wait, current); ssize_t ret; struct sk_buff *skb = NULL; + struct iovec iov; ret = count; @@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf, if (skb->len > count) goto outf; ret = -EFAULT; - if (copy_to_user(buf, skb->data, skb->len)) + iov.iov_base = buf; + iov.iov_len = count; + if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len)) goto outf; ret = skb->len; @@ -1567,13 +1570,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) struct channel *pch = chan->ppp; int proto; - if (!pch || skb->len == 0) { + if (!pch) { kfree_skb(skb); return; } - proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); + if (!pskb_may_pull(skb, 2)) { + kfree_skb(skb); + if (pch->ppp) { + ++pch->ppp->dev->stats.rx_length_errors; + ppp_receive_error(pch->ppp); + } + goto done; + } + + proto = PPP_PROTO(skb); if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) { /* put it on the channel queue */ skb_queue_tail(&pch->file.rq, skb); @@ -1585,6 +1597,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) } else { ppp_do_recv(pch->ppp, skb, pch); } + +done: read_unlock_bh(&pch->upl); } @@ -1617,7 +1631,8 @@ ppp_input_error(struct ppp_channel *chan, int code) static void ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { - if (pskb_may_pull(skb, 2)) { + /* note: a 0-length skb is used as an error indication */ + if (skb->len > 0) { #ifdef CONFIG_PPP_MULTILINK /* XXX do channel-level decompression here */ if (PPP_PROTO(skb) == PPP_MP) @@ -1625,15 +1640,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) else #endif /* CONFIG_PPP_MULTILINK */ ppp_receive_nonmp_frame(ppp, skb); - return; + } else { + kfree_skb(skb); + ppp_receive_error(ppp); } - - if (skb->len > 0) - /* note: a 0-length skb is used as an error indication */ - ++ppp->dev->stats.rx_length_errors; - - kfree_skb(skb); - ppp_receive_error(ppp); } static void diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 4748c21eb72..dd8106ff35a 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { u32 opts2 = le32_to_cpu(desc->opts2); struct vlan_group *vlgrp = tp->vlgrp; int ret; if (vlgrp && (opts2 & RxVlanTag)) { - vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff)); + __vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling); ret = 0; } else ret = -1; @@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { return -1; } @@ -4445,12 +4445,20 @@ out: return done; } +/* + * Warning : rtl8169_rx_interrupt() might be called : + * 1) from NAPI (softirq) context + * (polling = 1 : we should call netif_receive_skb()) + * 2) from process context (rtl8169_reset_task()) + * (polling = 0 : we must call netif_rx() instead) + */ static int rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, void __iomem *ioaddr, u32 budget) { unsigned int cur_rx, rx_left; unsigned int delta, count; + int polling = (budget != ~(u32)0) ? 1 : 0; cur_rx = tp->cur_rx; rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; @@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev, skb_put(skb, pkt_size); skb->protocol = eth_type_trans(skb, dev); - if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0) - netif_receive_skb(skb); + if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) { + if (likely(polling)) + netif_receive_skb(skb); + else + netif_rx(skb); + } dev->stats.rx_bytes += pkt_size; dev->stats.rx_packets++; diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 9944e5d662c..04efc0c1bda 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base) sc->mii_bus = mdiobus_alloc(); if (sc->mii_bus == NULL) { - sbmac_uninitctx(sc); - return -ENOMEM; + err = -ENOMEM; + goto uninit_ctx; } + sc->mii_bus->name = sbmac_mdio_string; + snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); + sc->mii_bus->priv = sc; + sc->mii_bus->read = sbmac_mii_read; + sc->mii_bus->write = sbmac_mii_write; + sc->mii_bus->irq = sc->phy_irq; + for (i = 0; i < PHY_MAX_ADDR; ++i) + sc->mii_bus->irq[i] = SBMAC_PHY_INT; + + sc->mii_bus->parent = &pldev->dev; + /* + * Probe PHY address + */ + err = mdiobus_register(sc->mii_bus); + if (err) { + printk(KERN_ERR "%s: unable to register MDIO bus\n", + dev->name); + goto free_mdio; + } + dev_set_drvdata(&pldev->dev, sc->mii_bus); + err = register_netdev(dev); if (err) { printk(KERN_ERR "%s.%d: unable to register netdev\n", sbmac_string, idx); - mdiobus_free(sc->mii_bus); - sbmac_uninitctx(sc); - return err; + goto unreg_mdio; } pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); @@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base) pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", dev->name, base, eaddr); - sc->mii_bus->name = sbmac_mdio_string; - snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); - sc->mii_bus->priv = sc; - sc->mii_bus->read = sbmac_mii_read; - sc->mii_bus->write = sbmac_mii_write; - sc->mii_bus->irq = sc->phy_irq; - for (i = 0; i < PHY_MAX_ADDR; ++i) - sc->mii_bus->irq[i] = SBMAC_PHY_INT; - - sc->mii_bus->parent = &pldev->dev; - dev_set_drvdata(&pldev->dev, sc->mii_bus); - return 0; +unreg_mdio: + mdiobus_unregister(sc->mii_bus); + dev_set_drvdata(&pldev->dev, NULL); +free_mdio: + mdiobus_free(sc->mii_bus); +uninit_ctx: + sbmac_uninitctx(sc); + return err; } @@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev) goto out_err; } - /* - * Probe PHY address - */ - err = mdiobus_register(sc->mii_bus); - if (err) { - printk(KERN_ERR "%s: unable to register MDIO bus\n", - dev->name); - goto out_unirq; - } - sc->sbm_speed = sbmac_speed_none; sc->sbm_duplex = sbmac_duplex_none; sc->sbm_fc = sbmac_fc_none; @@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev) return 0; out_unregister: - mdiobus_unregister(sc->mii_bus); - -out_unirq: free_irq(dev->irq, dev); - out_err: return err; } @@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev) phy_disconnect(sc->phy_dev); sc->phy_dev = NULL; - - mdiobus_unregister(sc->mii_bus); - free_irq(dev->irq, dev); sbdma_emptyring(&(sc->sbm_txdma)); @@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev) unregister_netdev(dev); sbmac_uninitctx(sc); + mdiobus_unregister(sc->mii_bus); mdiobus_free(sc->mii_bus); iounmap(sc->sbm_base); free_netdev(dev); diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 5d58abc224f..d7b7018a1de 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -400,7 +400,6 @@ config USB_IPHETH config USB_SIERRA_NET tristate "USB-to-WWAN Driver for Sierra Wireless modems" depends on USB_USBNET - default y help Choose this option if you have a Sierra Wireless USB-to-WWAN device. diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 04b281002a7..5dfed9297b2 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu goto out; dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); - dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14); + dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12); for (i = 0; i < DM_TIMEOUT; i++) { u8 tmp; diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index a44f9e0ea09..f1942d69a0d 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) /* prepare sync message from template */ memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); + /* initiate the sync sequence */ + sierra_net_dosync(dev); + return 0; } diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 269fda36283..c24067f1a0c 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -246,7 +246,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, u32 idx, i; i = (*index) % ring_limit; - (*index) = idx = le32_to_cpu(ring_control->device_idx[1]); + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); idx %= ring_limit; while (i != idx) { diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index ff301774471..597f8e27aaf 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len, struct iovec *data); void sctp_chunk_free(struct sctp_chunk *); void *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data); +void *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data); struct sctp_chunk *sctp_chunkify(struct sk_buff *, const struct sctp_association *, struct sock *); diff --git a/include/net/sock.h b/include/net/sock.h index b4603cd54fc..1ad6435f252 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -74,7 +74,7 @@ printk(KERN_DEBUG msg); } while (0) #else /* Validate arguments and do nothing */ -static void inline int __attribute__ ((format (printf, 2, 3))) +static inline void __attribute__ ((format (printf, 2, 3))) SOCK_DEBUG(struct sock *sk, const char *msg, ...) { } diff --git a/kernel/workqueue.c b/kernel/workqueue.c index dee48658805..5bfb213984b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -774,7 +774,7 @@ void flush_delayed_work(struct delayed_work *dwork) { if (del_timer_sync(&dwork->timer)) { struct cpu_workqueue_struct *cwq; - cwq = wq_per_cpu(keventd_wq, get_cpu()); + cwq = wq_per_cpu(get_wq_data(&dwork->work)->wq, get_cpu()); __queue_work(cwq, &dwork->work); put_cpu(); } diff --git a/mm/slub.c b/mm/slub.c index 7d6c8b1ccf6..d2a54fe71ea 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2153,7 +2153,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) int local_node; if (slab_state >= UP && (s < kmalloc_caches || - s > kmalloc_caches + KMALLOC_CACHES)) + s >= kmalloc_caches + KMALLOC_CACHES)) local_node = page_to_nid(virt_to_page(s)); else local_node = 0; diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3192aa02ba5..3f9e86b15e0 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -200,7 +200,7 @@ lookup_protocol: inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk); np->hop_limit = -1; - np->mcast_hops = -1; + np->mcast_hops = IPV6_DEFAULT_MCASTHOPS; np->mc_loop = 1; np->pmtudisc = IPV6_PMTUDISC_WANT; np->ipv6only = net->ipv6.sysctl.bindv6only; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 0fd5b4c8835..30c1767186b 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = { cpu_to_be16(sizeof(struct sctp_paramhdr)), }; -/* A helper to initialize to initialize an op error inside a +/* A helper to initialize an op error inside a * provided chunk, as most cause codes will be embedded inside an * abort chunk. */ @@ -125,6 +125,29 @@ void sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code, chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err); } +/* A helper to initialize an op error inside a + * provided chunk, as most cause codes will be embedded inside an + * abort chunk. Differs from sctp_init_cause in that it won't oops + * if there isn't enough space in the op error chunk + */ +int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code, + size_t paylen) +{ + sctp_errhdr_t err; + __u16 len; + + /* Cause code constants are now defined in network order. */ + err.cause = cause_code; + len = sizeof(sctp_errhdr_t) + paylen; + err.length = htons(len); + + if (skb_tailroom(chunk->skb) > len) + return -ENOSPC; + chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk, + sizeof(sctp_errhdr_t), + &err); + return 0; +} /* 3.3.2 Initiation (INIT) (1) * * This chunk is used to initiate a SCTP association between two @@ -1132,6 +1155,24 @@ nodata: return retval; } +/* Create an Operation Error chunk of a fixed size, + * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT) + * This is a helper function to allocate an error chunk for + * for those invalid parameter codes in which we may not want + * to report all the errors, if the incomming chunk is large + */ +static inline struct sctp_chunk *sctp_make_op_error_fixed( + const struct sctp_association *asoc, + const struct sctp_chunk *chunk) +{ + size_t size = asoc ? asoc->pathmtu : 0; + + if (!size) + size = SCTP_DEFAULT_MAXSEGMENT; + + return sctp_make_op_error_space(asoc, chunk, size); +} + /* Create an Operation Error chunk. */ struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc, const struct sctp_chunk *chunk, @@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data) return target; } +/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient + * space in the chunk + */ +void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk, + int len, const void *data) +{ + if (skb_tailroom(chunk->skb) > len) + return sctp_addto_chunk(chunk, len, data); + else + return NULL; +} + /* Append bytes from user space to the end of a chunk. Will panic if * chunk is not big enough. * Returns a kernel err value. @@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc, * returning multiple unknown parameters. */ if (NULL == *errp) - *errp = sctp_make_op_error_space(asoc, chunk, - ntohs(chunk->chunk_hdr->length)); + *errp = sctp_make_op_error_fixed(asoc, chunk); if (*errp) { - sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM, + sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM, WORD_ROUND(ntohs(param.p->length))); - sctp_addto_chunk(*errp, + sctp_addto_chunk_fixed(*errp, WORD_ROUND(ntohs(param.p->length)), param.v); } else { diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 29de5ee3457..3f425a65906 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -20,6 +20,11 @@ #include <linux/uaccess.h> #include "internal.h" +#define rcu_dereference_locked_keyring(keyring) \ + (rcu_dereference_protected( \ + (keyring)->payload.subscriptions, \ + rwsem_is_locked((struct rw_semaphore *)&(keyring)->sem))) + /* * when plumbing the depths of the key tree, this sets a hard limit set on how * deep we're willing to go @@ -199,8 +204,7 @@ static long keyring_read(const struct key *keyring, int loop, ret; ret = 0; - klist = keyring->payload.subscriptions; - + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* calculate how much data we could return */ qty = klist->nkeys * sizeof(key_serial_t); @@ -524,9 +528,8 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check) struct key *keyring; int bucket; - keyring = ERR_PTR(-EINVAL); if (!name) - goto error; + return ERR_PTR(-EINVAL); bucket = keyring_hash(name); @@ -553,17 +556,18 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check) KEY_SEARCH) < 0) continue; - /* we've got a match */ - atomic_inc(&keyring->usage); - read_unlock(&keyring_name_lock); - goto error; + /* we've got a match but we might end up racing with + * key_cleanup() if the keyring is currently 'dead' + * (ie. it has a zero usage count) */ + if (!atomic_inc_not_zero(&keyring->usage)) + continue; + goto out; } } - read_unlock(&keyring_name_lock); keyring = ERR_PTR(-ENOKEY); - -error: +out: + read_unlock(&keyring_name_lock); return keyring; } /* end find_keyring_by_name() */ @@ -719,8 +723,7 @@ int __key_link(struct key *keyring, struct key *key) } /* see if there's a matching key we can displace */ - klist = keyring->payload.subscriptions; - + klist = rcu_dereference_locked_keyring(keyring); if (klist && klist->nkeys > 0) { struct key_type *type = key->type; @@ -764,8 +767,6 @@ int __key_link(struct key *keyring, struct key *key) if (ret < 0) goto error2; - klist = keyring->payload.subscriptions; - if (klist && klist->nkeys < klist->maxkeys) { /* there's sufficient slack space to add directly */ atomic_inc(&key->usage); @@ -867,7 +868,7 @@ int key_unlink(struct key *keyring, struct key *key) down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* search the keyring for the key */ for (loop = 0; loop < klist->nkeys; loop++) @@ -958,7 +959,7 @@ int keyring_clear(struct key *keyring) /* detach the pointer block with the locks held */ down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* adjust the quota */ key_payload_reserve(keyring, @@ -990,7 +991,9 @@ EXPORT_SYMBOL(keyring_clear); */ static void keyring_revoke(struct key *keyring) { - struct keyring_list *klist = keyring->payload.subscriptions; + struct keyring_list *klist; + + klist = rcu_dereference_locked_keyring(keyring); /* adjust the quota */ key_payload_reserve(keyring, 0); @@ -1024,7 +1027,7 @@ void keyring_gc(struct key *keyring, time_t limit) down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (!klist) goto no_klist; diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 1bc38587adc..ac49c8aacbf 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -94,7 +94,7 @@ static int call_sbin_request_key(struct key_construction *cons, } /* attach the auth key to the session keyring */ - ret = __key_link(keyring, authkey); + ret = key_link(keyring, authkey); if (ret < 0) goto error_link; diff --git a/sound/core/timer.c b/sound/core/timer.c index 73943651cae..5040c7b862f 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1160,6 +1160,7 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri, { struct snd_timer_user *tu = timeri->callback_data; struct snd_timer_tread r1; + unsigned long flags; if (event >= SNDRV_TIMER_EVENT_START && event <= SNDRV_TIMER_EVENT_PAUSE) @@ -1169,9 +1170,9 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri, r1.event = event; r1.tstamp = *tstamp; r1.val = resolution; - spin_lock(&tu->qlock); + spin_lock_irqsave(&tu->qlock, flags); snd_timer_user_append_to_tqueue(tu, &r1); - spin_unlock(&tu->qlock); + spin_unlock_irqrestore(&tu->qlock, flags); kill_fasync(&tu->fasync, SIGIO, POLL_IN); wake_up(&tu->qchange_sleep); } diff --git a/sound/isa/sb/es968.c b/sound/isa/sb/es968.c index cafc3a7316a..ff18286fef9 100644 --- a/sound/isa/sb/es968.c +++ b/sound/isa/sb/es968.c @@ -93,7 +93,7 @@ static int __devinit snd_card_es968_pnp(int dev, struct snd_card_es968 *acard, return err; } port[dev] = pnp_port_start(pdev, 0); - dma8[dev] = pnp_dma(pdev, 1); + dma8[dev] = pnp_dma(pdev, 0); irq[dev] = pnp_irq(pdev, 0); return 0; diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 7de782a5b8f..350ee8ac415 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -766,7 +766,7 @@ static int build_input(struct hda_codec *codec) for (n = 0; n < AUTO_PIN_LAST; n++) { if (!spec->adc_nid[n]) continue; - err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[i]); + err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[n]); if (err < 0) return err; } diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 61682e1d09d..56e52071c76 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1195,9 +1195,10 @@ static int patch_cxt5045(struct hda_codec *codec) switch (codec->subsystem_id >> 16) { case 0x103c: + case 0x1631: case 0x1734: - /* HP & Fujitsu-Siemens laptops have really bad sound over 0dB - * on NID 0x17. Fix max PCM level to 0 dB + /* HP, Packard Bell, & Fujitsu-Siemens laptops have really bad + * sound over 0dB on NID 0x17. Fix max PCM level to 0 dB * (originally it has 0x2b steps with 0dB offset 0x14) */ snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT, @@ -2842,6 +2843,9 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_DELL_LAPTOP), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO), + SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), + SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD), {} }; |