diff options
43 files changed, 313 insertions, 315 deletions
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 0f19e322335..c3d753296bc 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -141,7 +141,7 @@ static int all_generic_ide; /* Set to claim all devices */ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u16 command; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &generic_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -149,7 +149,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id .udma_mask = 0x3f, .port_ops = &generic_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; /* Don't use the generic entry unless instructed to do so */ if (id->driver_data == 1 && all_generic_ide == 0) @@ -175,7 +175,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if (dev->vendor == PCI_VENDOR_ID_AL) ata_pci_clear_simplex(dev); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static struct pci_device_id ata_generic[] = { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 4f5a0dc7fb9..13b6b1df2ac 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1030,7 +1030,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; - struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; struct piix_host_priv *hpriv; unsigned long port_flags; @@ -1089,7 +1089,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[1].mwdma_mask = 0; port_info[1].udma_mask = 0; } - return ata_pci_init_one(pdev, ppinfo, 2); + return ata_pci_init_one(pdev, ppi); } static int __init piix_init(void) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index bf8f65b0959..9cff5c50657 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6856,6 +6856,7 @@ EXPORT_SYMBOL_GPL(ata_timing_merge); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_native_host); +EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d211db6b35a..e35d13466c6 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -544,7 +544,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port) * RETURNS: * 0 on success, -errno otherwise. */ -static int ata_pci_init_bmdma(struct ata_host *host) +int ata_pci_init_bmdma(struct ata_host *host) { struct device *gdev = host->dev; struct pci_dev *pdev = to_pci_dev(gdev); @@ -566,7 +566,7 @@ static int ata_pci_init_bmdma(struct ata_host *host) } host->iomap = pcim_iomap_table(pdev); - for (i = 0; i < host->n_ports; i++) { + for (i = 0; i < 2; i++) { struct ata_port *ap = host->ports[i]; void __iomem *bmdma = host->iomap[4] + 8 * i; @@ -585,54 +585,52 @@ static int ata_pci_init_bmdma(struct ata_host *host) /** * ata_pci_init_native_host - acquire native ATA resources and init host * @host: target ATA host - * @port_mask: ports to consider * - * Acquire native PCI ATA resources for @host and initialize - * @host accordoingly. + * Acquire native PCI ATA resources for @host and initialize the + * first two ports of @host accordingly. Ports marked dummy are + * skipped and allocation failure makes the port dummy. * * LOCKING: * Inherited from calling layer (may sleep). * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if at least one port is initialized, -ENODEV if no port is + * available. */ -int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) +int ata_pci_init_native_host(struct ata_host *host) { struct device *gdev = host->dev; struct pci_dev *pdev = to_pci_dev(gdev); + unsigned int mask = 0; int i, rc; - /* Discard disabled ports. Some controllers show their unused - * channels this way. Disabled ports are made dummy. - */ - for (i = 0; i < 2; i++) { - if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) { - host->ports[i]->ops = &ata_dummy_port_ops; - port_mask &= ~(1 << i); - } - } - - if (!port_mask) { - dev_printk(KERN_ERR, gdev, "no available port\n"); - return -ENODEV; - } - /* request, iomap BARs and init port addresses accordingly */ for (i = 0; i < 2; i++) { struct ata_port *ap = host->ports[i]; int base = i * 2; void __iomem * const *iomap; - if (!(port_mask & (1 << i))) + if (ata_port_is_dummy(ap)) + continue; + + /* Discard disabled ports. Some controllers show + * their unused channels this way. Disabled ports are + * made dummy. + */ + if (!ata_resources_present(pdev, i)) { + ap->ops = &ata_dummy_port_ops; continue; + } rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); if (rc) { - dev_printk(KERN_ERR, gdev, "failed to request/iomap " - "BARs for port %d (errno=%d)\n", i, rc); + dev_printk(KERN_WARNING, gdev, + "failed to request/iomap BARs for port %d " + "(errno=%d)\n", i, rc); if (rc == -EBUSY) pcim_pin_device(pdev); - return rc; + ap->ops = &ata_dummy_port_ops; + continue; } host->iomap = iomap = pcim_iomap_table(pdev); @@ -641,6 +639,13 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) ap->ioaddr.ctl_addr = (void __iomem *) ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); ata_std_ports(&ap->ioaddr); + + mask |= 1 << i; + } + + if (!mask) { + dev_printk(KERN_ERR, gdev, "no available native port\n"); + return -ENODEV; } return 0; @@ -649,8 +654,7 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) /** * ata_pci_prepare_native_host - helper to prepare native PCI ATA host * @pdev: target PCI device - * @ppi: array of port_info - * @n_ports: number of ports to allocate + * @ppi: array of port_info, must be enough for two ports * @r_host: out argument for the initialized ATA host * * Helper to allocate ATA host for @pdev, acquire all native PCI @@ -664,10 +668,9 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) */ int ata_pci_prepare_native_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, - int n_ports, struct ata_host **r_host) + struct ata_host **r_host) { struct ata_host *host; - unsigned int port_mask; int rc; if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) @@ -681,11 +684,7 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev, goto err_out; } - port_mask = ATA_PORT_PRIMARY; - if (n_ports > 1) - port_mask |= ATA_PORT_SECONDARY; - - rc = ata_pci_init_native_host(host, port_mask); + rc = ata_pci_init_native_host(host); if (rc) goto err_out; @@ -777,8 +776,11 @@ static int ata_init_legacy_port(struct ata_port *ap, /* iomap cmd and ctl ports */ legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8); legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1); - if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) + if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) { + dev_printk(KERN_WARNING, host->dev, + "failed to map cmd/ctl ports\n"); return -ENOMEM; + } /* init IO addresses */ ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no]; @@ -792,19 +794,20 @@ static int ata_init_legacy_port(struct ata_port *ap, /** * ata_init_legacy_host - acquire legacy ATA resources and init ATA host * @host: target ATA host - * @legacy_mask: out parameter, mask indicating ports is in legacy mode * @was_busy: out parameter, indicates whether any port was busy * - * Acquire legacy ATA resources for ports. + * Acquire legacy ATA resources for the first two ports of @host + * and initialize it accordingly. Ports marked dummy are skipped + * and resource acquistion failure makes the port dummy. * * LOCKING: * Inherited from calling layer (may sleep). * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if at least one port is initialized, -ENODEV if no port is + * available. */ -static int ata_init_legacy_host(struct ata_host *host, - unsigned int *legacy_mask, int *was_busy) +static int ata_init_legacy_host(struct ata_host *host, int *was_busy) { struct device *gdev = host->dev; struct ata_legacy_devres *legacy_dr; @@ -821,22 +824,23 @@ static int ata_init_legacy_host(struct ata_host *host, devres_add(gdev, legacy_dr); for (i = 0; i < 2; i++) { - *legacy_mask &= ~(1 << i); + if (ata_port_is_dummy(host->ports[i])) + continue; + rc = ata_init_legacy_port(host->ports[i], legacy_dr); if (rc == 0) legacy_dr->mask |= 1 << i; - else if (rc == -EBUSY) - (*was_busy)++; - } - - if (!legacy_dr->mask) - return -EBUSY; - - for (i = 0; i < 2; i++) - if (!(legacy_dr->mask & (1 << i))) + else { + if (rc == -EBUSY) + (*was_busy)++; host->ports[i]->ops = &ata_dummy_port_ops; + } + } - *legacy_mask |= legacy_dr->mask; + if (!legacy_dr->mask) { + dev_printk(KERN_ERR, gdev, "no available legacy port\n"); + return -ENODEV; + } devres_remove_group(gdev, NULL); return 0; @@ -875,7 +879,7 @@ static int ata_request_legacy_irqs(struct ata_host *host, legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL); BUG_ON(!legacy_dr); - for (i = 0; i < host->n_ports; i++) { + for (i = 0; i < 2; i++) { unsigned int irq; /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */ @@ -923,8 +927,7 @@ static int ata_request_legacy_irqs(struct ata_host *host, /** * ata_pci_init_one - Initialize/register PCI IDE host controller * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller + * @ppi: array of port_info, must be enough for two ports * * This is a helper function which can be called from a driver's * xxx_init_one() probe function if the hardware uses traditional @@ -944,26 +947,34 @@ static int ata_request_legacy_irqs(struct ata_host *host, * RETURNS: * Zero on success, negative on errno-based value on error. */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) +int ata_pci_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi) { struct device *dev = &pdev->dev; + const struct ata_port_info *pi = NULL; struct ata_host *host = NULL; - const struct ata_port_info *port[2]; u8 mask; - unsigned int legacy_mode = 0; - int rc; + int legacy_mode = 0; + int i, rc; DPRINTK("ENTER\n"); - if (!devres_open_group(dev, NULL, GFP_KERNEL)) - return -ENOMEM; + /* look up the first valid port_info */ + for (i = 0; i < 2 && ppi[i]; i++) { + if (ppi[i]->port_ops != &ata_dummy_port_ops) { + pi = ppi[i]; + break; + } + } - BUG_ON(n_ports < 1 || n_ports > 2); + if (!pi) { + dev_printk(KERN_ERR, &pdev->dev, + "no valid port_info specified\n"); + return -EINVAL; + } - port[0] = port_info[0]; - port[1] = (n_ports > 1) ? port_info[1] : NULL; + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; /* FIXME: Really for ATA it isn't safe because the device may be multi-purpose and we want to leave it alone if it was already @@ -984,7 +995,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); + legacy_mode = 1; #if defined(CONFIG_NO_ATA_LEGACY) /* Some platforms with PCI limits cannot address compat port space. In that case we punt if their firmware has @@ -998,7 +1009,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* alloc and init host */ - host = ata_host_alloc_pinfo(dev, port, n_ports); + host = ata_host_alloc_pinfo(dev, ppi, 2); if (!host) { dev_printk(KERN_ERR, &pdev->dev, "failed to allocate ATA host\n"); @@ -1007,19 +1018,13 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } if (!legacy_mode) { - unsigned int port_mask; - - port_mask = ATA_PORT_PRIMARY; - if (n_ports > 1) - port_mask |= ATA_PORT_SECONDARY; - - rc = ata_pci_init_native_host(host, port_mask); + rc = ata_pci_init_native_host(host); if (rc) goto err_out; } else { int was_busy = 0; - rc = ata_init_legacy_host(host, &legacy_mode, &was_busy); + rc = ata_init_legacy_host(host, &was_busy); if (was_busy) pcim_pin_device(pdev); if (rc) @@ -1040,8 +1045,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; if (!legacy_mode) - rc = devm_request_irq(dev, pdev->irq, - port_info[0]->port_ops->irq_handler, + rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); else { irq_handler_t handler[2] = { host->ops->irq_handler, @@ -1055,7 +1059,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; /* register */ - rc = ata_host_register(host, port_info[0]->sht); + rc = ata_host_register(host, pi->sht); if (rc) goto err_out; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 48c7531ae69..3c55a5ff74c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -518,14 +518,14 @@ static void ali_init_chipset(struct pci_dev *pdev) static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info_early = { + static const struct ata_port_info info_early = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ - static struct ata_port_info info_20 = { + static const struct ata_port_info info_20 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -533,7 +533,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ - static struct ata_port_info info_20_udma = { + static const struct ata_port_info info_20_udma = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -542,7 +542,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_20_port_ops }; /* Revision 0xC2 adds UDMA66 */ - static struct ata_port_info info_c2 = { + static const struct ata_port_info info_c2 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -551,7 +551,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC3 is UDMA100 */ - static struct ata_port_info info_c3 = { + static const struct ata_port_info info_c3 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -560,7 +560,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC4 is UDMA133 */ - static struct ata_port_info info_c4 = { + static const struct ata_port_info info_c4 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -569,7 +569,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ - static struct ata_port_info info_c5 = { + static const struct ata_port_info info_c5 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -578,7 +578,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c5_port_ops }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; u8 rev, tmp; struct pci_dev *isa_bridge; @@ -590,17 +590,17 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) */ if (rev < 0x20) { - port_info[0] = port_info[1] = &info_early; + ppi[0] = &info_early; } else if (rev < 0xC2) { - port_info[0] = port_info[1] = &info_20; + ppi[0] = &info_20; } else if (rev == 0xC2) { - port_info[0] = port_info[1] = &info_c2; + ppi[0] = &info_c2; } else if (rev == 0xC3) { - port_info[0] = port_info[1] = &info_c3; + ppi[0] = &info_c3; } else if (rev == 0xC4) { - port_info[0] = port_info[1] = &info_c4; + ppi[0] = &info_c4; } else - port_info[0] = port_info[1] = &info_c5; + ppi[0] = &info_c5; ali_init_chipset(pdev); @@ -609,10 +609,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Are we paired with a UDMA capable chip */ pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) - port_info[0] = port_info[1] = &info_20_udma; + ppi[0] = &info_20_udma; pci_dev_put(isa_bridge); } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 86a26186739..b439351f1fd 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -538,7 +538,7 @@ static struct ata_port_operations nv133_port_ops = { static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info[10] = { + static const struct ata_port_info info[10] = { { /* 0: AMD 7401 */ .sht = &amd_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -620,7 +620,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &amd100_port_ops } }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; static int printed_version; int type = id->driver_data; u8 rev; @@ -652,9 +652,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ata_pci_clear_simplex(pdev); /* And fire it up */ - - port_info[0] = port_info[1] = &info[type]; - return ata_pci_init_one(pdev, port_info, 2); + ppi[0] = &info[type]; + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index ef51940c3ad..9861059dd67 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -414,7 +414,7 @@ static const struct ata_port_operations artop6260_ops = { static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { static int printed_version; - static struct ata_port_info info_6210 = { + static const struct ata_port_info info_6210 = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -422,7 +422,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA2, .port_ops = &artop6210_ops, }; - static struct ata_port_info info_626x = { + static const struct ata_port_info info_626x = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -430,7 +430,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA4, .port_ops = &artop6260_ops, }; - static struct ata_port_info info_626x_fast = { + static const struct ata_port_info info_626x_fast = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -438,32 +438,30 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &artop6260_ops, }; - struct ata_port_info *port_info[2]; - struct ata_port_info *info = NULL; - int ports = 2; + const struct ata_port_info *ppi[] = { NULL, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); if (id->driver_data == 0) { /* 6210 variant */ - info = &info_6210; + ppi[0] = &info_6210; + ppi[1] = &ata_dummy_port_info; /* BIOS may have left us in UDMA, clear it before libata probe */ pci_write_config_byte(pdev, 0x54, 0); /* For the moment (also lacks dsc) */ printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); - ports = 1; } else if (id->driver_data == 1) /* 6260 */ - info = &info_626x; + ppi[0] = &info_626x; else if (id->driver_data == 2) { /* 6260 or 6260 + fast */ unsigned long io = pci_resource_start(pdev, 4); u8 reg; - info = &info_626x; + ppi[0] = &info_626x; if (inb(io) & 0x10) - info = &info_626x_fast; + ppi[0] = &info_626x_fast; /* Mac systems come up with some registers not set as we will need them */ @@ -484,10 +482,9 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) } - BUG_ON(info == NULL); + BUG_ON(ppi[0] == NULL); - port_info[0] = port_info[1] = info; - return ata_pci_init_one(pdev, port_info, ports); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id artop_pci_tbl[] = { diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 3c2264dbdd6..844914681a2 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -268,7 +268,7 @@ static struct ata_port_operations atiixp_port_ops = { static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &atiixp_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -276,8 +276,8 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x3F, .port_ops = &atiixp_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; - return ata_pci_init_one(dev, port_info, 2); + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id atiixp[] = { diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 987dec935b5..ed00fa9d53b 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -249,17 +249,16 @@ static void cmd640_hardware_init(struct pci_dev *pdev) static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cmd640_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &cmd640_port_ops }; - - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; cmd640_hardware_init(pdev); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static int cmd640_reinit_one(struct pci_dev *pdev) diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3e02c6a3ba9..2a79b335cfc 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -377,7 +377,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u32 class_rev; - static struct ata_port_info cmd_info[6] = { + static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .sht = &cmd64x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -424,11 +424,9 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cmd648_port_ops } }; - static struct ata_port_info *port_info[2], *info; + const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL }; u8 mrdmode; - info = &cmd_info[id->driver_data]; - pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; @@ -438,10 +436,10 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (pdev->device == PCI_DEVICE_ID_CMD_646) { /* Does UDMA work ? */ if (class_rev > 4) - info = &cmd_info[2]; + ppi[0] = &cmd_info[2]; /* Early rev with other problems ? */ else if (class_rev == 1) - info = &cmd_info[3]; + ppi[0] = &cmd_info[3]; } pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); @@ -457,8 +455,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - port_info[0] = port_info[1] = info; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 637d8b302e3..1b67923d7a4 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -335,7 +335,7 @@ fail_put: static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cs5530_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -344,23 +344,23 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ - static struct ata_port_info info_palmax_secondary = { + static const struct ata_port_info info_palmax_secondary = { .sht = &cs5530_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &cs5530_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; /* Chip initialisation */ if (cs5530_init_chip()) return -ENODEV; if (cs5530_is_palmax()) - port_info[1] = &info_palmax_secondary; + ppi[1] = &info_palmax_secondary; /* Now kick off ATA set up */ - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 683885a47b6..f37d4cd812a 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -223,7 +223,7 @@ static struct ata_port_operations cs5535_port_ops = { static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cs5535_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -231,7 +231,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x1f, .port_ops = &cs5535_port_ops }; - struct ata_port_info *ports[1] = { &info }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; u32 timings, dummy; @@ -243,7 +243,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) rdmsr(ATAC_CH0D1_PIO, timings, dummy); if (CS5535_BAD_PIO(timings)) wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); - return ata_pci_init_one(dev, ports, 1); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id cs5535[] = { diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 30e5c543bcb..27b9f29c01e 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -165,14 +165,14 @@ static struct ata_port_operations cy82c693_port_ops = { static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cy82c693_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &cy82c693_port_ops }; - static struct ata_port_info *port_info[1] = { &info }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the moment we don't handle the secondary. FIXME */ @@ -180,7 +180,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - return ata_pci_init_one(pdev, port_info, 1); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id cy82c693[] = { diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 23e929f0cd3..079248a9b46 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -301,7 +301,7 @@ static const struct ata_port_operations efar_ops = { static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &efar_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -309,13 +309,13 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) .udma_mask = 0x0f, /* UDMA 66 */ .port_ops = &efar_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id efar_pci_tbl[] = { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index cb965f41d09..c6c8a8bb06d 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -417,7 +417,7 @@ static void hpt36x_init_chipset(struct pci_dev *dev) static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_hpt366 = { + static const struct ata_port_info info_hpt366 = { .sht = &hpt36x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -425,7 +425,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x1f, .port_ops = &hpt366_port_ops }; - struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366}; + struct ata_port_info info = info_hpt366; + const struct ata_port_info *ppi[] = { &info, NULL }; u32 class_rev; u32 reg1; @@ -446,17 +447,17 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { case 5: - info_hpt366.private_data = &hpt366_40; + info.private_data = &hpt366_40; break; case 9: - info_hpt366.private_data = &hpt366_25; + info.private_data = &hpt366_25; break; default: - info_hpt366.private_data = &hpt366_33; + info.private_data = &hpt366_33; break; } /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 1614e8c822a..5a0a410654e 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -887,7 +887,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT370 - UDMA100 */ - static struct ata_port_info info_hpt370 = { + static const struct ata_port_info info_hpt370 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -896,7 +896,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ - static struct ata_port_info info_hpt370a = { + static const struct ata_port_info info_hpt370a = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -905,7 +905,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370a_port_ops }; /* HPT370 - UDMA100 */ - static struct ata_port_info info_hpt370_33 = { + static const struct ata_port_info info_hpt370_33 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -914,7 +914,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ - static struct ata_port_info info_hpt370a_33 = { + static const struct ata_port_info info_hpt370a_33 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -923,7 +923,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370a_port_ops }; /* HPT371, 372 and friends - UDMA133 */ - static struct ata_port_info info_hpt372 = { + static const struct ata_port_info info_hpt372 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -932,7 +932,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt372_port_ops }; /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ - static struct ata_port_info info_hpt372_50 = { + static const struct ata_port_info info_hpt372_50 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -941,7 +941,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt372_port_ops }; /* HPT374 - UDMA133 */ - static struct ata_port_info info_hpt374 = { + static const struct ata_port_info info_hpt374 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -951,9 +951,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; static const int MHz[4] = { 33, 40, 50, 66 }; - - struct ata_port_info *port_info[2]; - struct ata_port_info *port; + const struct ata_port_info *port; + void *private_data = NULL; + struct ata_port_info port_info; + const struct ata_port_info *ppi[] = { &port_info, NULL }; u8 irqmask; u32 class_rev; @@ -1124,13 +1125,13 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } if (clock_slot == 3) - port->private_data = (void *)hpt37x_timings_66; + private_data = (void *)hpt37x_timings_66; else - port->private_data = (void *)hpt37x_timings_50; + private_data = (void *)hpt37x_timings_50; printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); } else { - port->private_data = (void *)chip_table->clocks[clock_slot]; + private_data = (void *)chip_table->clocks[clock_slot]; /* * Perform a final fixup. Note that we will have used the * DPLL on the HPT372 which means we don't have to worry @@ -1144,9 +1145,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); } - port_info[0] = port_info[1] = port; /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + port_info = *port; + port_info.private_data = private_data; + + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id hpt37x[] = { diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index ea1037d6786..f25154aed75 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -488,7 +488,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT372N and friends - UDMA133 */ - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &hpt3x2n_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -496,8 +496,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &hpt3x2n_port_ops }; - struct ata_port_info *port_info[2]; - struct ata_port_info *port = &info; + struct ata_port_info port = info; + const struct ata_port_info *ppi[] = { &port, NULL }; u8 irqmask; u32 class_rev; @@ -585,9 +585,9 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Set our private data up. We only need a few flags so we use it directly */ - port->private_data = NULL; + port.private_data = NULL; if (pci_mhz > 60) { - port->private_data = (void *)PCI66; + port.private_data = (void *)PCI66; /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. @@ -598,8 +598,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - port_info[0] = port_info[1] = port; - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id hpt3x2n[] = { diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index 84c636b9bea..bbabe7902fb 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -171,7 +171,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &hpt3x3_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -179,11 +179,11 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &hpt3x3_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; hpt3x3_init_chipset(dev); /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index bf3aaa205ed..a769952646e 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -311,7 +311,7 @@ static const struct ata_port_operations it8213_ops = { static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &it8213_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -319,14 +319,14 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en .udma_mask = 0x1f, /* UDMA 100 */ .port_ops = &it8213_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + /* Current IT8213 stuff is single port */ + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* Current IT8213 stuff is single port */ - return ata_pci_init_one(pdev, port_info, 1); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id it8213_pci_tbl[] = { diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 8e565a5f2c8..ff9a6fd3665 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -718,14 +718,14 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u8 conf; - static struct ata_port_info info_smart = { + static const struct ata_port_info info_smart = { .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &it821x_smart_port_ops }; - static struct ata_port_info info_passthru = { + static const struct ata_port_info info_passthru = { .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -733,8 +733,8 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &it821x_passthru_port_ops }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; static char *mode[2] = { "pass through", "smart" }; /* Force the card into bypass mode if so requested */ @@ -747,11 +747,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); if (conf == 0) - port_info[0] = port_info[1] = &info_passthru; + ppi[0] = &info_passthru; else - port_info[0] = port_info[1] = &info_smart; + ppi[0] = &info_smart; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 1aa7bc2fda5..8d799e87f75 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -191,7 +191,7 @@ static const struct ata_port_operations jmicron_ops = { static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &jmicron_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -201,9 +201,9 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &jmicron_ops, }; - struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id jmicron_pci_tbl[] = { diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 2745e23cac4..edbfe0dbbf7 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -161,7 +161,7 @@ static const struct ata_port_operations marvell_ops = { static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &marvell_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -171,7 +171,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &marvell_ops, }; - static struct ata_port_info info_sata = { + static const struct ata_port_info info_sata = { .sht = &marvell_sht, /* Slave possible as its magically mapped not real */ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -182,13 +182,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &marvell_ops, }; - struct ata_port_info *port_info[2] = { &info, &info_sata }; - int n_port = 2; + const struct ata_port_info *ppi[] = { &info, &info_sata }; if (pdev->device == 0x6101) - n_port = 1; + ppi[1] = &ata_dummy_port_info; - return ata_pci_init_one(pdev, port_info, n_port); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id marvell_pci_tbl[] = { diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index f15eb34fb1f..81f56345866 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -92,7 +92,7 @@ static const struct ata_port_operations netcell_ops = { static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &netcell_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, /* Actually we don't really care about these as the @@ -102,7 +102,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e .udma_mask = 0x3f, /* UDMA 133 */ .port_ops = &netcell_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *port_info[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -112,7 +112,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e ata_pci_clear_simplex(pdev); /* And let the library code do the work */ - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, port_info); } static const struct pci_device_id netcell_pci_tbl[] = { diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index d5eb42bdae9..ea70ec74487 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -191,14 +191,14 @@ static struct ata_port_operations ns87410_port_ops = { static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &ns87410_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x0F, .port_ops = &ns87410_port_ops }; - static struct ata_port_info *port_info[2] = {&info, &info}; - return ata_pci_init_one(dev, port_info, 2); + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id ns87410[] = { diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index d59002e7528..29c23ddd655 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -289,20 +289,20 @@ static const struct ata_port_operations oldpiix_pata_ops = { static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &oldpiix_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma1-2 */ .port_ops = &oldpiix_pata_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id oldpiix_pci_tbl[] = { diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 944b7084b45..1c44653e1e0 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -216,19 +216,19 @@ static struct ata_port_operations opti_port_ops = { static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &opti_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &opti_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id opti[] = { diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 875ac4a49dd..3093b02286c 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -482,14 +482,14 @@ done_nomsg: /* Wrong chip revision */ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_82c700 = { + static const struct ata_port_info info_82c700 = { .sht = &optidma_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &optidma_port_ops }; - static struct ata_port_info info_82c700_udma = { + static const struct ata_port_info info_82c700_udma = { .sht = &optidma_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -497,8 +497,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &optiplus_port_ops }; - static struct ata_port_info *port_info[2]; - struct ata_port_info *info = &info_82c700; + const struct ata_port_info *ppi[] = { &info_82c700, NULL }; static int printed_version; if (!printed_version++) @@ -510,10 +509,9 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ if (optiplus_with_udma(dev)) - info = &info_82c700_udma; + ppi[0] = &info_82c700_udma; - port_info[0] = port_info[1] = info; - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id optidma[] = { diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 3e204c329d5..edbaf9d653b 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -317,7 +317,7 @@ static struct ata_port_operations pdc2026x_port_ops = { static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info[3] = { + static const struct ata_port_info info[3] = { { .sht = &pdc202xx_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -344,9 +344,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id } }; - static struct ata_port_info *port_info[2]; - - port_info[0] = port_info[1] = &info[id->driver_data]; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { struct pci_dev *bridge = dev->bus->self; @@ -358,7 +356,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id return -ENODEV; } } - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id pdc202xx[] = { diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index bc01b17a00c..ba96b54f5b8 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -255,7 +255,7 @@ static const struct ata_port_operations radisys_pata_ops = { static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &radisys_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -263,13 +263,13 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e .udma_mask = 0x14, /* UDMA33/66 only */ .port_ops = &radisys_pata_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id radisys_pci_tbl[] = { diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 97785b4f1ef..2bfd7ef42af 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -131,22 +131,20 @@ static int rz1000_fifo_disable(struct pci_dev *pdev) static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info *port_info[2]; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &rz1000_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &rz1000_port_ops }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); - if (rz1000_fifo_disable(pdev) == 0) { - port_info[0] = &info; - port_info[1] = &info; - return ata_pci_init_one(pdev, port_info, 2); - } + if (rz1000_fifo_disable(pdev) == 0) + return ata_pci_init_one(pdev, ppi); + printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); /* Not safe to use so skip */ return -ENODEV; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 2af9f8c8bd1..225013ecf4b 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -243,7 +243,7 @@ static struct ata_port_operations sc1200_port_ops = { static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &sc1200_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -251,10 +251,10 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &sc1200_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; - /* Can't enable port 2 yet, see top comments */ - return ata_pci_init_one(dev, port_info, 1); + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id sc1200[] = { diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8bbe4266f76..dee6e211949 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -475,8 +475,7 @@ static void serverworks_fixup_ht1000(struct pci_dev *pdev) static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - int ports = 2; - static struct ata_port_info info[4] = { + static const struct ata_port_info info[4] = { { /* OSB4 */ .sht = &serverworks_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -507,8 +506,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id .port_ops = &serverworks_csb_port_ops } }; - static struct ata_port_info *port_info[2]; - struct ata_port_info *devinfo = &info[id->driver_data]; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; /* Force master latency timer to 64 PCI clocks */ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); @@ -517,7 +515,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { /* Select non UDMA capable OSB4 if we can't do fixups */ if ( serverworks_fixup_osb4(pdev) < 0) - devinfo = &info[1]; + ppi[0] = &info[1]; } /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || @@ -527,11 +525,11 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id /* If the returned btr is the newer revision then select the right info block */ if (serverworks_fixup_csb(pdev) == 3) - devinfo = &info[3]; + ppi[0] = &info[3]; /* Is this the 3rd channel CSB6 IDE ? */ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) - ports = 1; + ppi[1] = &ata_dummy_port_info; } /* setup HT1000E */ else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) @@ -540,8 +538,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ata_pci_clear_simplex(pdev); - port_info[0] = port_info[1] = devinfo; - return ata_pci_init_one(pdev, port_info, ports); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 8c0b25f145a..440e2cb6ee7 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -341,7 +341,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev) static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &sil680_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -349,7 +349,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &sil680_port_ops }; - static struct ata_port_info info_slow = { + static const struct ata_port_info info_slow = { .sht = &sil680_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -357,7 +357,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x3f, .port_ops = &sil680_port_ops }; - static struct ata_port_info *port_info[2] = {&info, &info}; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) @@ -366,12 +366,12 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) switch(sil680_init_chip(pdev)) { case 0: - port_info[0] = port_info[1] = &info_slow; + ppi[0] = &info_slow; break; case 0x30: return -ENODEV; } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 9b3774a4775..f2231267e01 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -38,8 +38,8 @@ #define DRV_VERSION "0.5.1" struct sis_chipset { - u16 device; /* PCI host ID */ - struct ata_port_info *info; /* Info block */ + u16 device; /* PCI host ID */ + const struct ata_port_info *info; /* Info block */ /* Probably add family, cable detect type etc here to clean up code later */ }; @@ -696,7 +696,7 @@ static const struct ata_port_operations sis_old_ops = { .port_start = ata_port_start, }; -static struct ata_port_info sis_info = { +static const struct ata_port_info sis_info = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -704,7 +704,7 @@ static struct ata_port_info sis_info = { .udma_mask = 0, .port_ops = &sis_old_ops, }; -static struct ata_port_info sis_info33 = { +static const struct ata_port_info sis_info33 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -712,35 +712,35 @@ static struct ata_port_info sis_info33 = { .udma_mask = ATA_UDMA2, /* UDMA 33 */ .port_ops = &sis_old_ops, }; -static struct ata_port_info sis_info66 = { +static const struct ata_port_info sis_info66 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA4, /* UDMA 66 */ .port_ops = &sis_66_ops, }; -static struct ata_port_info sis_info100 = { +static const struct ata_port_info sis_info100 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA5, .port_ops = &sis_100_ops, }; -static struct ata_port_info sis_info100_early = { +static const struct ata_port_info sis_info100_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .udma_mask = ATA_UDMA5, .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; -struct ata_port_info sis_info133 = { +const struct ata_port_info sis_info133 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; -static struct ata_port_info sis_info133_early = { +static const struct ata_port_info sis_info133_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -823,8 +823,8 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info *port_info[2]; - struct ata_port_info *port; + struct ata_port_info port; + const struct ata_port_info *ppi[] = { &port, NULL }; struct pci_dev *host = NULL; struct sis_chipset *chipset = NULL; struct sis_chipset *sets; @@ -964,13 +964,12 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (chipset == NULL) return -ENODEV; - port = chipset->info; - port->private_data = chipset; + port = *chipset->info; + port.private_data = chipset; sis_fixup(pdev, chipset); - port_info[0] = port_info[1] = port; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id sis_pci_tbl[] = { diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 9aeffdbe282..f48491ad5f3 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -301,20 +301,22 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_dma = { + static const struct ata_port_info info_dma = { .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &sl82c105_port_ops }; - static struct ata_port_info info_early = { + static const struct ata_port_info info_early = { .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &sl82c105_port_ops }; - static struct ata_port_info *port_info[2] = { &info_early, &info_early }; + /* for now use only the first port */ + const struct ata_port_info *ppi[] = { &info_early, + &ata_dummy_port_info }; u32 val; int rev; @@ -324,17 +326,14 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); else if (rev <= 5) dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n"); - else { - port_info[0] = &info_dma; - port_info[1] = &info_dma; - } + else + ppi[0] = &info_dma; pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - - return ata_pci_init_one(dev, port_info, 1); /* For now */ + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id sl82c105[] = { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 045f9d2832d..b1d3076dfe5 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -233,20 +233,20 @@ static struct ata_port_operations triflex_port_ops = { static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &triflex_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &triflex_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id triflex[] = { diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 3740644e7f4..e4c71f76bd5 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -421,7 +421,7 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags) static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { /* Early VIA without UDMA support */ - static struct ata_port_info via_mwdma_info = { + static const struct ata_port_info via_mwdma_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -429,7 +429,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ - static struct ata_port_info via_mwdma_info_borked = { + static const struct ata_port_info via_mwdma_info_borked = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -437,7 +437,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ - static struct ata_port_info via_udma33_info = { + static const struct ata_port_info via_udma33_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -446,7 +446,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ - static struct ata_port_info via_udma66_info = { + static const struct ata_port_info via_udma66_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -455,7 +455,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ - static struct ata_port_info via_udma100_info = { + static const struct ata_port_info via_udma100_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -464,7 +464,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ - static struct ata_port_info via_udma133_info = { + static const struct ata_port_info via_udma133_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -472,7 +472,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; - struct ata_port_info *port_info[2], *type; + struct ata_port_info type; + const struct ata_port_info *ppi[] = { &type, NULL }; struct pci_dev *isa = NULL; const struct via_isa_bridge *config; static int printed_version; @@ -517,25 +518,25 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) switch(config->flags & VIA_UDMA) { case VIA_UDMA_NONE: if (config->flags & VIA_NO_UNMASK) - type = &via_mwdma_info_borked; + type = via_mwdma_info_borked; else - type = &via_mwdma_info; + type = via_mwdma_info; break; case VIA_UDMA_33: - type = &via_udma33_info; + type = via_udma33_info; break; case VIA_UDMA_66: - type = &via_udma66_info; + type = via_udma66_info; /* The 66 MHz devices require we enable the clock */ pci_read_config_dword(pdev, 0x50, &timing); timing |= 0x80008; pci_write_config_dword(pdev, 0x50, timing); break; case VIA_UDMA_100: - type = &via_udma100_info; + type = via_udma100_info; break; case VIA_UDMA_133: - type = &via_udma133_info; + type = via_udma133_info; break; default: WARN_ON(1); @@ -550,10 +551,9 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* We have established the device type, now fire it up */ - type->private_data = (void *)config; + type.private_data = (void *)config; - port_info[0] = port_info[1] = type; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6962f8e492f..4cea3ef7522 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -457,7 +457,7 @@ static const struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -static struct ata_port_info nv_port_info[] = { +static const struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, @@ -1537,7 +1537,7 @@ static void nv_adma_error_handler(struct ata_port *ap) static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; - const struct ata_port_info *ppi[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; struct ata_host *host; struct nv_host_priv *hpriv; int rc; @@ -1565,8 +1565,8 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) type = ADMA; } - ppi[0] = ppi[1] = &nv_port_info[type]; - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + ppi[0] = &nv_port_info[type]; + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index d8ee062e82f..ee66c5fa7ac 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -129,7 +129,7 @@ static const struct ata_port_operations sis_ops = { .port_start = ata_port_start, }; -static struct ata_port_info sis_port_info = { +static const struct ata_port_info sis_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, @@ -255,7 +255,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; struct ata_port_info pi = sis_port_info; - const struct ata_port_info *ppi[2] = { &pi, &pi }; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; u32 genctl, val; u8 pmr; @@ -335,7 +335,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) break; } - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index f74e383de08..006f5e35265 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -125,7 +125,7 @@ static const struct ata_port_operations uli_ops = { .port_start = ata_port_start, }; -static struct ata_port_info uli_port_info = { +static const struct ata_port_info uli_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_IGN_SIMPLEX, .pio_mask = 0x1f, /* pio0-4 */ @@ -201,19 +201,33 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) n_ports = 2; if (board_idx == uli_5287) n_ports = 4; - rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host); - if (rc) - return rc; + + /* allocate the host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; host->private_data = hpriv; + /* the first two ports are standard SFF */ + rc = ata_pci_init_native_host(host); + if (rc) + return rc; + + rc = ata_pci_init_bmdma(host); + if (rc) + return rc; + iomap = host->iomap; switch (board_idx) { case uli_5287: + /* If there are four, the last two live right after + * the standard SFF ports. + */ hpriv->scr_cfg_addr[0] = ULI5287_BASE; hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 939c9246fdd..814597a0a70 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -415,7 +415,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int rc; - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h index 231da8fc220..0f2208d8d5e 100644 --- a/drivers/ata/sis.h +++ b/drivers/ata/sis.h @@ -2,4 +2,4 @@ struct ata_port_info; /* pata_sis.c */ -extern struct ata_port_info sis_info133; +extern const struct ata_port_info sis_info133; diff --git a/include/linux/libata.h b/include/linux/libata.h index 8a7cc13c851..95b74ba7dbf 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -253,10 +253,6 @@ enum { ATA_DMA_PAD_SZ = 4, ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE, - /* masks for port functions */ - ATA_PORT_PRIMARY = (1 << 0), - ATA_PORT_SECONDARY = (1 << 1), - /* ering size */ ATA_ERING_SIZE = 32, @@ -688,8 +684,8 @@ extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); extern void ata_port_disable(struct ata_port *); extern void ata_std_ports(struct ata_ioports *ioaddr); #ifdef CONFIG_PCI -extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports); +extern int ata_pci_init_one (struct pci_dev *pdev, + const struct ata_port_info * const * ppi); extern void ata_pci_remove_one (struct pci_dev *pdev); #ifdef CONFIG_PM extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); @@ -854,11 +850,11 @@ struct pci_bits { unsigned long val; }; -extern int ata_pci_init_native_host(struct ata_host *host, - unsigned int port_mask); +extern int ata_pci_init_native_host(struct ata_host *host); +extern int ata_pci_init_bmdma(struct ata_host *host); extern int ata_pci_prepare_native_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, - int n_ports, struct ata_host **r_host); + struct ata_host **r_host); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ |