diff options
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-hummingboard.dts | 203 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6q-hummingboard.dts | 13 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 200 |
4 files changed, 219 insertions, 198 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 60a6214ff49..b022972a082 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -226,6 +226,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ imx6q-gw552x.dtb \ + imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 71598546087..44a0e6736bb 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,206 +1,13 @@ /* - * Copyright (C) 2013,2014 Russell King + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-hummingboard.dtsi" / { - model = "SolidRun HummingBoard DL/Solo"; - compatible = "solidrun,hummingboard", "fsl,imx6dl"; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 2 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet - status = "okay"; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - */ -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - }; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; + model = "SolidRun HummingBoard Solo/DualLite"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts new file mode 100644 index 00000000000..0a357410516 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi new file mode 100644 index 00000000000..bf38072a277 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 2 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; + + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; |