diff options
| -rw-r--r-- | fs/ext4/resize.c | 309 |
1 files changed, 10 insertions, 299 deletions
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index eba706d9276..f9d948f0eb8 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -595,137 +595,6 @@ out: } /* - * Set up the block and inode bitmaps, and the inode table for the new group. - * This doesn't need to be part of the main transaction, since we are only - * changing blocks outside the actual filesystem. We still do journaling to - * ensure the recovery is correct in case of a failure just after resize. - * If any part of this fails, we simply abort the resize. - */ -static int setup_new_group_blocks(struct super_block *sb, - struct ext4_new_group_data *input) -{ - struct ext4_sb_info *sbi = EXT4_SB(sb); - ext4_fsblk_t start = ext4_group_first_block_no(sb, input->group); - int reserved_gdb = ext4_bg_has_super(sb, input->group) ? - le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0; - unsigned long gdblocks = ext4_bg_num_gdb(sb, input->group); - struct buffer_head *bh; - handle_t *handle; - ext4_fsblk_t block; - ext4_grpblk_t bit; - int i; - int err = 0, err2; - - /* This transaction may be extended/restarted along the way */ - handle = ext4_journal_start_sb(sb, EXT4_MAX_TRANS_DATA); - - if (IS_ERR(handle)) - return PTR_ERR(handle); - - BUG_ON(input->group != sbi->s_groups_count); - - /* Copy all of the GDT blocks into the backup in this group */ - for (i = 0, bit = 1, block = start + 1; - i < gdblocks; i++, block++, bit++) { - struct buffer_head *gdb; - - ext4_debug("update backup group %#04llx (+%d)\n", block, bit); - err = extend_or_restart_transaction(handle, 1); - if (err) - goto exit_journal; - - gdb = sb_getblk(sb, block); - if (!gdb) { - err = -EIO; - goto exit_journal; - } - if ((err = ext4_journal_get_write_access(handle, gdb))) { - brelse(gdb); - goto exit_journal; - } - memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, gdb->b_size); - set_buffer_uptodate(gdb); - err = ext4_handle_dirty_metadata(handle, NULL, gdb); - if (unlikely(err)) { - brelse(gdb); - goto exit_journal; - } - brelse(gdb); - } - - /* Zero out all of the reserved backup group descriptor table blocks */ - ext4_debug("clear inode table blocks %#04llx -> %#04lx\n", - block, sbi->s_itb_per_group); - err = sb_issue_zeroout(sb, gdblocks + start + 1, reserved_gdb, - GFP_NOFS); - if (err) - goto exit_journal; - - err = extend_or_restart_transaction(handle, 2); - if (err) - goto exit_journal; - - bh = bclean(handle, sb, input->block_bitmap); - if (IS_ERR(bh)) { - err = PTR_ERR(bh); - goto exit_journal; - } - - if (ext4_bg_has_super(sb, input->group)) { - ext4_debug("mark backup group tables %#04llx (+0)\n", start); - ext4_set_bits(bh->b_data, 0, gdblocks + reserved_gdb + 1); - } - - ext4_debug("mark block bitmap %#04llx (+%llu)\n", input->block_bitmap, - input->block_bitmap - start); - ext4_set_bit(input->block_bitmap - start, bh->b_data); - ext4_debug("mark inode bitmap %#04llx (+%llu)\n", input->inode_bitmap, - input->inode_bitmap - start); - ext4_set_bit(input->inode_bitmap - start, bh->b_data); - - /* Zero out all of the inode table blocks */ - block = input->inode_table; - ext4_debug("clear inode table blocks %#04llx -> %#04lx\n", - block, sbi->s_itb_per_group); - err = sb_issue_zeroout(sb, block, sbi->s_itb_per_group, GFP_NOFS); - if (err) - goto exit_bh; - ext4_set_bits(bh->b_data, input->inode_table - start, - sbi->s_itb_per_group); - - - ext4_mark_bitmap_end(input->blocks_count, sb->s_blocksize * 8, - bh->b_data); - err = ext4_handle_dirty_metadata(handle, NULL, bh); - if (unlikely(err)) { - ext4_std_error(sb, err); - goto exit_bh; - } - brelse(bh); - /* Mark unused entries in inode bitmap used */ - ext4_debug("clear inode bitmap %#04llx (+%llu)\n", - input->inode_bitmap, input->inode_bitmap - start); - if (IS_ERR(bh = bclean(handle, sb, input->inode_bitmap))) { - err = PTR_ERR(bh); - goto exit_journal; - } - - ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), sb->s_blocksize * 8, - bh->b_data); - err = ext4_handle_dirty_metadata(handle, NULL, bh); - if (unlikely(err)) - ext4_std_error(sb, err); -exit_bh: - brelse(bh); - -exit_journal: - if ((err2 = ext4_journal_stop(handle)) && !err) - err = err2; - - return err; -} - -/* * Iterate through the groups which hold BACKUP superblock/GDT copies in an * ext4 filesystem. The counters should be initialized to 1, 5, and 7 before * calling this for the first time. In a sparse filesystem it will be the @@ -1509,16 +1378,15 @@ static int ext4_setup_next_flex_gd(struct super_block *sb, */ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) { + struct ext4_new_flex_group_data flex_gd; struct ext4_sb_info *sbi = EXT4_SB(sb); struct ext4_super_block *es = sbi->s_es; int reserved_gdb = ext4_bg_has_super(sb, input->group) ? le16_to_cpu(es->s_reserved_gdt_blocks) : 0; - struct buffer_head *primary = NULL; - struct ext4_group_desc *gdp; struct inode *inode = NULL; - handle_t *handle; int gdb_off, gdb_num; - int err, err2; + int err; + __u16 bg_flags = 0; gdb_num = input->group / EXT4_DESC_PER_BLOCK(sb); gdb_off = input->group % EXT4_DESC_PER_BLOCK(sb); @@ -1557,172 +1425,15 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) } - if ((err = verify_group_input(sb, input))) - goto exit_put; - - if ((err = setup_new_group_blocks(sb, input))) - goto exit_put; - - /* - * We will always be modifying at least the superblock and a GDT - * block. If we are adding a group past the last current GDT block, - * we will also modify the inode and the dindirect block. If we - * are adding a group with superblock/GDT backups we will also - * modify each of the reserved GDT dindirect blocks. - */ - handle = ext4_journal_start_sb(sb, - ext4_bg_has_super(sb, input->group) ? - 3 + reserved_gdb : 4); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto exit_put; - } - - if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh))) - goto exit_journal; - - /* - * We will only either add reserved group blocks to a backup group - * or remove reserved blocks for the first group in a new group block. - * Doing both would be mean more complex code, and sane people don't - * use non-sparse filesystems anymore. This is already checked above. - */ - if (gdb_off) { - primary = sbi->s_group_desc[gdb_num]; - if ((err = ext4_journal_get_write_access(handle, primary))) - goto exit_journal; - - if (reserved_gdb && ext4_bg_num_gdb(sb, input->group)) { - err = reserve_backup_gdb(handle, inode, input->group); - if (err) - goto exit_journal; - } - } else { - /* - * Note that we can access new group descriptor block safely - * only if add_new_gdb() succeeds. - */ - err = add_new_gdb(handle, inode, input->group); - if (err) - goto exit_journal; - primary = sbi->s_group_desc[gdb_num]; - } - - /* - * OK, now we've set up the new group. Time to make it active. - * - * so we have to be safe wrt. concurrent accesses the group - * data. So we need to be careful to set all of the relevant - * group descriptor data etc. *before* we enable the group. - * - * The key field here is sbi->s_groups_count: as long as - * that retains its old value, nobody is going to access the new - * group. - * - * So first we update all the descriptor metadata for the new - * group; then we update the total disk blocks count; then we - * update the groups count to enable the group; then finally we - * update the free space counts so that the system can start - * using the new disk blocks. - */ - - /* Update group descriptor block for new group */ - gdp = (struct ext4_group_desc *)((char *)primary->b_data + - gdb_off * EXT4_DESC_SIZE(sb)); - - memset(gdp, 0, EXT4_DESC_SIZE(sb)); - ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ - ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ - ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */ - ext4_free_group_clusters_set(sb, gdp, input->free_blocks_count); - ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb)); - gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED); - gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp); - - /* - * We can allocate memory for mb_alloc based on the new group - * descriptor - */ - err = ext4_mb_add_groupinfo(sb, input->group, gdp); + err = verify_group_input(sb, input); if (err) - goto exit_journal; - - /* - * Make the new blocks and inodes valid next. We do this before - * increasing the group count so that once the group is enabled, - * all of its blocks and inodes are already valid. - * - * We always allocate group-by-group, then block-by-block or - * inode-by-inode within a group, so enabling these - * blocks/inodes before the group is live won't actually let us - * allocate the new space yet. - */ - ext4_blocks_count_set(es, ext4_blocks_count(es) + - input->blocks_count); - le32_add_cpu(&es->s_inodes_count, EXT4_INODES_PER_GROUP(sb)); - - /* - * We need to protect s_groups_count against other CPUs seeing - * inconsistent state in the superblock. - * - * The precise rules we use are: - * - * * Writers must perform a smp_wmb() after updating all dependent - * data and before modifying the groups count - * - * * Readers must perform an smp_rmb() after reading the groups count - * and before reading any dependent data. - * - * NB. These rules can be relaxed when checking the group count - * while freeing data, as we can only allocate from a block - * group after serialising against the group count, and we can - * only then free after serialising in turn against that - * allocation. - */ - smp_wmb(); - - /* Update the global fs size fields */ - sbi->s_groups_count++; - - err = ext4_handle_dirty_metadata(handle, NULL, primary); - if (unlikely(err)) { - ext4_std_error(sb, err); - goto exit_journal; - } - - /* Update the reserved block counts only once the new group is - * active. */ - ext4_r_blocks_count_set(es, ext4_r_blocks_count(es) + - input->reserved_blocks); - - /* Update the free space counts */ - percpu_counter_add(&sbi->s_freeclusters_counter, - EXT4_B2C(sbi, input->free_blocks_count)); - percpu_counter_add(&sbi->s_freeinodes_counter, - EXT4_INODES_PER_GROUP(sb)); - - if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG) && - sbi->s_log_groups_per_flex) { - ext4_group_t flex_group; - flex_group = ext4_flex_group(sbi, input->group); - atomic_add(EXT4_B2C(sbi, input->free_blocks_count), - &sbi->s_flex_groups[flex_group].free_clusters); - atomic_add(EXT4_INODES_PER_GROUP(sb), - &sbi->s_flex_groups[flex_group].free_inodes); - } - - ext4_handle_dirty_super(handle, sb); + goto out; -exit_journal: - if ((err2 = ext4_journal_stop(handle)) && !err) - err = err2; - if (!err && primary) { - update_backups(sb, sbi->s_sbh->b_blocknr, (char *)es, - sizeof(struct ext4_super_block)); - update_backups(sb, primary->b_blocknr, primary->b_data, - primary->b_size); - } -exit_put: + flex_gd.count = 1; + flex_gd.groups = input; + flex_gd.bg_flags = &bg_flags; + err = ext4_flex_group_add(sb, inode, &flex_gd); +out: iput(inode); return err; } /* ext4_group_add */ |