diff options
-rw-r--r-- | Documentation/video4linux/CARDLIST.cx23885 | 1 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-cards.c | 26 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 113 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-i2c.c | 4 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885.h | 1 |
5 files changed, 144 insertions, 1 deletions
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index b057a3c9f8f..929b90c8387 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -7,3 +7,4 @@ 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717] 7 -> Hauppauge WinTV-HVR1200 [0070:71d1] 8 -> Hauppauge WinTV-HVR1700 [0070:8101] + 9 -> Hauppauge WinTV-HVR1400 [0070:8010] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 859510f7469..0f4b325f2d8 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -138,6 +138,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1700", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1400] = { + .name = "Hauppauge WinTV-HVR1400", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -197,6 +201,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8101, .card = CX23885_BOARD_HAUPPAUGE_HVR1700, + }, { + .subvendor = 0x0070, + .subdevice = 0x8010, + .card = CX23885_BOARD_HAUPPAUGE_HVR1400, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -251,6 +259,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ + case 80019: + /* WinTV-HVR1400 (Express Card, Retail, IR, + * DVB-T and Basic analog */ case 81519: /* WinTV-HVR1700 (PCIe, Retail, No IR, half height, * DVB-T and MPEG2 HW Encoder */ @@ -365,6 +376,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x00050005); break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + /* GPIO-0 Dibcom7000p demodulator reset */ + /* GPIO-2 xc3028L tuner reset */ + /* GPIO-13 LED */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; } } @@ -376,6 +399,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1400: /* FIXME: Implement me */ break; } @@ -400,6 +424,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1400: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0x80); break; @@ -425,6 +450,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1400: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1b9a85e43d4..870d6e197d6 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -40,6 +40,8 @@ #include "dvb-pll.h" #include "tuner-xc2028.h" #include "tuner-simple.h" +#include "dib7000p.h" +#include "dibx000_common.h" static unsigned int debug; @@ -189,6 +191,92 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { .gate = TDA18271_GATE_ANALOG, }; +struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, + * P_agc_nb_est=2, P_agc_write=0 + */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.000000 + * With external clock = 30.000000 */ +struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, /* internal */ + 30000, /* sampling */ + 1, /* pll_cfg: prediv */ + 8, /* pll_cfg: ratio */ + 3, /* pll_cfg: range */ + 1, /* pll_cfg: reset */ + 0, /* pll_cfg: bypass */ + 0, /* misc: refdiv */ + 0, /* misc: bypclk_div */ + 1, /* misc: IO_CLK_en_core */ + 1, /* misc: ADClkSrc */ + 0, /* misc: modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000 /* xtal_hz */ +}; + +static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 0, + .update_lna = NULL, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + .agc_control = NULL, + .spur_protect = 0, + + .output_mode = OUTMODE_MPEG2_SERIAL, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -343,6 +431,31 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1200_tuner_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + i2c_bus = &dev->i2c_bus[0]; + port->dvb.frontend = dvb_attach(dib7000p_attach, + &i2c_bus->i2c_adap, + 0x12, &hauppauge_hvr1400_dib7000_config); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x64, + .callback = cx23885_hvr1500_xc3028_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028L-v36.fw", + .max_len = 64, + .demod = 5000, + .d2633 = 1 + }; + + fe = dvb_attach(xc2028_attach, + port->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 85f9d5ef17d..3928945df5f 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -354,6 +354,7 @@ static struct i2c_client cx23885_i2c_client_template = { static char *i2c_devs[128] = { [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", [ 0x1c >> 1 ] = "lgdt3303", [ 0x86 >> 1 ] = "tda9887", [ 0x32 >> 1 ] = "cx24227", @@ -361,7 +362,8 @@ static char *i2c_devs[128] = { [ 0x84 >> 1 ] = "tda8295", [ 0xa0 >> 1 ] = "eeprom", [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", - [ 0xc2 >> 1 ] = "tuner/mt2131/tda8275/xc5000", + [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", + [0xc8 >> 1] = "tuner/xc3028L", }; static void do_i2c_scan(char *name, struct i2c_client *c) diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index c5496e08c94..3705e6019ce 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -61,6 +61,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1500 6 #define CX23885_BOARD_HAUPPAUGE_HVR1200 7 #define CX23885_BOARD_HAUPPAUGE_HVR1700 8 +#define CX23885_BOARD_HAUPPAUGE_HVR1400 9 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ |