diff options
131 files changed, 217 insertions, 230 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 65bbd262239..a1a64327288 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -7,8 +7,8 @@ Please try and keep the descriptions small enough to fit on one line. Following translations are available on the WWW: - - Japanese, maintained by the JF Project (JF@linux.or.jp), at - http://www.linux.or.jp/JF/ + - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at + http://linuxjf.sourceforge.jp/ 00-INDEX - this file. diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill index 4201d5b0551..ff60ad9eca4 100644 --- a/Documentation/ABI/obsolete/sysfs-class-rfkill +++ b/Documentation/ABI/obsolete/sysfs-class-rfkill @@ -7,7 +7,7 @@ Date: 09-Jul-2007 KernelVersion v2.6.22 Contact: linux-wireless@vger.kernel.org Description: Current state of the transmitter. - This file is deprecated and sheduled to be removed in 2014, + This file is deprecated and scheduled to be removed in 2014, because its not possible to express the 'soft and hard block' state of the rfkill driver. Values: A numeric value. diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module index 75be4311833..a0dd21c6db5 100644 --- a/Documentation/ABI/stable/sysfs-module +++ b/Documentation/ABI/stable/sysfs-module @@ -6,7 +6,7 @@ Description: The name of the module that is in the kernel. This module name will show up either if the module is built directly into the kernel, or if it is loaded as a - dyanmic module. + dynamic module. /sys/module/MODULENAME/parameters This directory contains individual files that are each diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl index f51f28531b8..3fca32c4192 100644 --- a/Documentation/DocBook/filesystems.tmpl +++ b/Documentation/DocBook/filesystems.tmpl @@ -387,7 +387,7 @@ an example. <title>See also</title> <para> <citation> - <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz"> + <ulink url="http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz"> Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie </ulink> </citation> diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index cdd1bb9aac0..31df1aa0071 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -22,8 +22,8 @@ <para> The contents of this file are subject to the Open Software License version 1.1 that can be found at - <ulink url="http://www.opensource.org/licenses/osl-1.1.txt">http://www.opensource.org/licenses/osl-1.1.txt</ulink> and is included herein - by reference. + <ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink> + and is included herein by reference. </para> <para> @@ -945,7 +945,7 @@ and other resources, etc. <listitem> <para> - !BSY && ERR after CDB tranfer starts but before the + !BSY && ERR after CDB transfer starts but before the last byte of CDB is transferred. ATA/ATAPI standard states that "The device shall not terminate the PACKET command with an error before the last byte of the command packet has @@ -1050,7 +1050,7 @@ and other resources, etc. to complete a command. Combined with the fact that MWDMA and PIO transfer errors aren't allowed to use ICRC bit up to ATA/ATAPI-7, it seems to imply that ABRT bit alone could - indicate tranfer errors. + indicate transfer errors. </para> <para> However, ATA/ATAPI-8 draft revision 1f removes the part diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index c736380b464..a2485b3ff3d 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr <entry><para><link linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote> <para>Presumably all V4L RGB formats are -little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue +little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para> </footnote></para></entry> </row> @@ -823,7 +823,7 @@ standard); 35468950 Hz PAL and SECAM (625-line standards)</entry> <row> <entry>sample_format</entry> <entry>V4L2_PIX_FMT_GREY. The last four bytes (a -machine endianess integer) contain a frame counter.</entry> +machine endianness integer) contain a frame counter.</entry> </row> <row> <entry>start[]</entry> diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.txt index a17df9f91d1..5673594717c 100644 --- a/Documentation/arm/kernel_user_helpers.txt +++ b/Documentation/arm/kernel_user_helpers.txt @@ -25,7 +25,7 @@ inline (either in the code emitted directly by the compiler, or part of the implementation of a library call) when optimizing for a recent enough processor that has the necessary native support, but only if resulting binaries are already to be incompatible with earlier ARM processors due to -useage of similar native instructions for other things. In other words +usage of similar native instructions for other things. In other words don't make binaries unable to run on earlier processors just for the sake of not using these kernel helpers if your compiled code is not going to use new instructions for other purpose. diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 84f0a15fc21..b4b1fb3a83f 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -94,11 +94,11 @@ Throttling/Upper Limit policy Hierarchical Cgroups ==================== -- Currently none of the IO control policy supports hierarhical groups. But - cgroup interface does allow creation of hierarhical cgroups and internally +- Currently none of the IO control policy supports hierarchical groups. But + cgroup interface does allow creation of hierarchical cgroups and internally IO policies treat them as flat hierarchy. - So this patch will allow creation of cgroup hierarhcy but at the backend + So this patch will allow creation of cgroup hierarchcy but at the backend everything will be treated as flat. So if somebody created a hierarchy like as follows. @@ -266,7 +266,7 @@ Proportional weight policy files - blkio.idle_time - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This is the amount of time spent by the IO scheduler idling for a - given cgroup in anticipation of a better request than the exising ones + given cgroup in anticipation of a better request than the existing ones from other queues/cgroups. This is in nanoseconds. If this is read when the cgroup is in an idling state, the stat will only report the idle_time accumulated till the last idle period and will not include @@ -283,34 +283,34 @@ Throttling/Upper limit policy files ----------------------------------- - blkio.throttle.read_bps_device - Specifies upper limit on READ rate from the device. IO rate is - specified in bytes per second. Rules are per deivce. Following is + specified in bytes per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device - blkio.throttle.write_bps_device - Specifies upper limit on WRITE rate to the device. IO rate is - specified in bytes per second. Rules are per deivce. Following is + specified in bytes per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device - blkio.throttle.read_iops_device - Specifies upper limit on READ rate from the device. IO rate is - specified in IO per second. Rules are per deivce. Following is + specified in IO per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device - blkio.throttle.write_iops_device - Specifies upper limit on WRITE rate to the device. IO rate is - specified in io per second. Rules are per deivce. Following is + specified in io per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device Note: If both BW and IOPS rules are specified for a device, then IO is - subjectd to both the constraints. + subjected to both the constraints. - blkio.throttle.io_serviced - Number of IOs (bio) completed to/from the disk by the group (as diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 2a8c11331d2..946c73342cd 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -28,7 +28,7 @@ The target is named "raid" and it accepts the following parameters: raid6_nc RAID6 N continue - rotating parity N (right-to-left) with data continuation - Refererence: Chapter 4 of + Reference: Chapter 4 of http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf <#raid_params>: The number of parameters that follow. diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt index 0e5df9b04ad..a333bcb3a6c 100644 --- a/Documentation/device-mapper/persistent-data.txt +++ b/Documentation/device-mapper/persistent-data.txt @@ -3,7 +3,7 @@ Introduction The more-sophisticated device-mapper targets require complex metadata that is managed in kernel. In late 2010 we were seeing that various -different targets were rolling their own data strutures, for example: +different targets were rolling their own data structures, for example: - Mikulas Patocka's multisnap implementation - Heinz Mauelshagen's thin provisioning target diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index 801d9d1cf82..1ff044d87ca 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -1,7 +1,7 @@ Introduction ============ -This document descibes a collection of device-mapper targets that +This document describes a collection of device-mapper targets that between them implement thin-provisioning and snapshots. The main highlight of this implementation, compared to the previous diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index dbdab40ed3a..edc618a8aab 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -5,7 +5,7 @@ IPs present in the SoC. On top of that an omap_device is created to extend the platform_device capabilities and to allow binding with one or several hwmods. The hwmods will contain all the information to build the device: -adresse range, irq lines, dma lines, interconnect, PRCM register, +address range, irq lines, dma lines, interconnect, PRCM register, clock domain, input clocks. For the moment just point to the existing hwmod, the next step will be to move data from hwmod to device-tree representation. diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt index 6b07f65b32d..1881e1c6dda 100644 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ b/Documentation/devicetree/bindings/arm/sirf.txt @@ -1,3 +1,3 @@ -prima2 "cb" evalutation board +prima2 "cb" evaluation board Required root node properties: - compatible = "sirf,prima2-cb", "sirf,prima2"; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 7c1329de059..da0bfeb4253 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -169,7 +169,7 @@ it with special cases. b) Entry with a flattened device-tree block. Firmware loads the physical address of the flattened device tree block (dtb) into r2, - r1 is not used, but it is considered good practise to use a valid + r1 is not used, but it is considered good practice to use a valid machine number as described in Documentation/arm/Booting. r0 : 0 diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index bbe6cb3d185..879b6e31e2d 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -63,7 +63,7 @@ The slave DMA usage consists of following steps: struct dma_slave_config *config) Please see the dma_slave_config structure definition in dmaengine.h - for a detailed explaination of the struct members. Please note + for a detailed explanation of the struct members. Please note that the 'direction' member will be going away as it duplicates the direction given in the prepare call. diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt index e5ce8a1a978..b95f5bb522f 100644 --- a/Documentation/fb/matroxfb.txt +++ b/Documentation/fb/matroxfb.txt @@ -177,8 +177,8 @@ sgram - tells to driver that you have Gxx0 with SGRAM memory. It has no effect without `init'. sdram - tells to driver that you have Gxx0 with SDRAM memory. It is a default. -inv24 - change timings parameters for 24bpp modes on Millenium and - Millenium II. Specify this if you see strange color shadows around +inv24 - change timings parameters for 24bpp modes on Millennium and + Millennium II. Specify this if you see strange color shadows around characters. noinv24 - use standard timings. It is the default. inverse - invert colors on screen (for LCD displays) @@ -204,9 +204,9 @@ grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text, can paint colors. nograyscale - disable grayscale summing. It is default. cross4MB - enables that pixel line can cross 4MB boundary. It is default for - non-Millenium. + non-Millennium. nocross4MB - pixel line must not cross 4MB boundary. It is default for - Millenium I or II, because of these devices have hardware + Millennium I or II, because of these devices have hardware limitations which do not allow this. But this option is incompatible with some (if not all yet released) versions of XF86_FBDev. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 10ec4639f15..8c10bf375c7 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -308,7 +308,7 @@ min_batch_time=usec This parameter sets the commit time (as fast disks, at the cost of increasing latency. journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the - highest priorty) which should be used for I/O + highest priority) which should be used for I/O operations submitted by kjournald2 during a commit operation. This defaults to 3, which is a slightly higher priority than the default I/O @@ -343,7 +343,7 @@ noinit_itable Do not initialize any uninitialized inode table init_itable=n The lazy itable init code will wait n times the number of milliseconds it took to zero out the previous block group's inode table. This - minimizes the impact on the systme performance + minimizes the impact on the system performance while file system's inode table is being initialized. discard Controls whether ext4 should issue discard/TRIM diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt index d8188966929..19a19ebebc3 100644 --- a/Documentation/filesystems/gfs2-uevents.txt +++ b/Documentation/filesystems/gfs2-uevents.txt @@ -62,7 +62,7 @@ be fixed. The REMOVE uevent is generated at the end of an unsuccessful mount or at the end of a umount of the filesystem. All REMOVE uevents will -have been preceded by at least an ADD uevent for the same fileystem, +have been preceded by at least an ADD uevent for the same filesystem, and unlike the other uevents is generated automatically by the kernel's kobject subsystem. diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt index 65e03dd4482..c680b4b5353 100644 --- a/Documentation/filesystems/pohmelfs/network_protocol.txt +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command so one can extend protocol as needed without breaking backward compatibility as long as old commands are supported. All string lengths include tail 0 byte. -All commands are transferred over the network in big-endian. CPU endianess is used at the end peers. +All commands are transferred over the network in big-endian. CPU endianness is used at the end peers. @cmd - command number, which specifies command to be processed. Following commands are used currently: diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt index a8273d5fad2..59b4a0962e0 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt @@ -297,7 +297,7 @@ the above threads) is: either way about the archive format, and there are alternative tools, such as: - http://freshmeat.net/projects/afio/ + http://freecode.com/projects/afio 2) The cpio archive format chosen by the kernel is simpler and cleaner (and thus easier to create and parse) than any of the (literally dozens of) diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 3d9393b845b..e916e3d3648 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -993,7 +993,7 @@ struct dentry_operations { If the 'rcu_walk' parameter is true, then the caller is doing a pathwalk in RCU-walk mode. Sleeping is not permitted in this mode, - and the caller can be asked to leave it and call again by returing + and the caller can be asked to leave it and call again by returning -ECHILD. This function is only used if DCACHE_MANAGE_TRANSIT is set on the diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index ab70d96d2df..e5f982c845f 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -53,7 +53,7 @@ attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and configuration. in1_input Measured voltage. -in1_min Minumum Voltage. +in1_min Minimum Voltage. in1_max Maximum voltage. in1_min_alarm Voltage low alarm. in1_max_alarm Voltage high alarm. diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index f6e8bcbfacc..f8b478076f6 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -42,9 +42,9 @@ attributes are read-only. in[1-4]_label "vout[1-4]" in[1-4]_input Measured voltage. From READ_VOUT register. -in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 index 8ab51536a1e..19743919ea5 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440 @@ -48,9 +48,9 @@ attributes are read-only. in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. -in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index 71ed10a3c94..fe849871df3 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -42,9 +42,9 @@ attributes are read-only. in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. -in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 40ca6db50c4..0df5f276505 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -70,9 +70,9 @@ attributes are read-only. in[1-12]_label "vout[1-12]". in[1-12]_input Measured voltage. From READ_VOUT register. -in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -82,7 +82,7 @@ in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. curr[1-12]_label "iout[1-12]". curr[1-12]_input Measured current. From READ_IOUT register. curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200 index 3c58607f72f..fd7d07b1908 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200 @@ -54,9 +54,9 @@ attributes are read-only. in1_label "vin". in1_input Measured voltage. From READ_VIN register. -in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register. in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status. in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status. @@ -65,9 +65,9 @@ in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status. in[2-5]_label "vout[1-4]". in[2-5]_input Measured voltage. From READ_VOUT register. -in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -80,7 +80,7 @@ curr1_input Measured current. From READ_IIN register. curr[2-5]_label "iout[1-4]". curr[2-5]_input Measured current. From READ_IOUT register. curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index a4e8d90f59f..98ebacbdd8d 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -106,7 +106,7 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. -in1_lcrit Critical minumum input voltage. +in1_lcrit Critical minimum input voltage. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. @@ -115,7 +115,7 @@ in1_crit_alarm Input voltage critical high alarm. in2_label "vout1" in2_input Measured output voltage. -in2_lcrit Critical minumum output Voltage. +in2_lcrit Critical minimum output Voltage. in2_crit Critical maximum output voltage. in2_lcrit_alarm Critical output voltage critical low alarm. in2_crit_alarm Critical output voltage critical high alarm. diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl index 22ca53a67e2..27c3c549311 100644 --- a/Documentation/i2o/ioctl +++ b/Documentation/i2o/ioctl @@ -138,7 +138,7 @@ VI. Setting Parameters The return value is the size in bytes of the data written into ops->resbuf if no errors occur. If an error occurs, -1 is returned - and errno is set appropriatly: + and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -222,7 +222,7 @@ VIII. Downloading Software RETURNS This function returns 0 no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -264,7 +264,7 @@ IX. Uploading Software RETURNS This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -301,7 +301,7 @@ X. Removing Software RETURNS This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -325,7 +325,7 @@ X. Validating Configuration RETURNS This function returns 0 if no erro occur. If an error occurs, -1 is - returned and errno is set appropriatly: + returned and errno is set appropriately: ETIMEDOUT Timeout waiting for reply message ENXIO Invalid IOP number @@ -360,7 +360,7 @@ XI. Configuration Dialog RETURNS This function returns 0 if no error occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004 index 190d17bfff6..4cc3ad99f39 100644 --- a/Documentation/ide/ChangeLog.ide-cd.1994-2004 +++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004 @@ -175,7 +175,7 @@ * since the .pdf version doesn't seem to work... * -- Updated the TODO list to something more current. * - * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess, + * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness, * patch thanks to "Eddie C. Dost" <ecd@skynet.be> * * 4.50 Oct 19, 1998 -- New maintainers! diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index 2f95308251d..ae8ba9a74ce 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -132,8 +132,8 @@ number of contacts (f1 and f0 in the table below). byte 5: 0 1 ? ? ? ? f1 f0 This packet only appears after a position packet with the mt bit set, and -ususally only appears when there are two or more contacts (although -ocassionally it's seen with only a single contact). +usually only appears when there are two or more contacts (although +occassionally it's seen with only a single contact). The final v3 packet type is the trackstick packet. diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 8007b7ca87b..304262bb661 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -330,7 +330,7 @@ the USB documentation for how to setup an USB mouse. The TM DirectConnect (BSP) protocol is supported by the tmdc.c module. This includes, but is not limited to: -* ThrustMaster Millenium 3D Inceptor +* ThrustMaster Millennium 3D Interceptor * ThrustMaster 3D Rage Pad * ThrustMaster Fusion Digital Game Pad diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt index 91a6ecbae0b..18eb98c44ff 100644 --- a/Documentation/ioctl/hdio.txt +++ b/Documentation/ioctl/hdio.txt @@ -596,7 +596,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile if CHS/LBA28 The association between in_flags.all and each enable - bitfield flips depending on endianess; fortunately, TASKFILE + bitfield flips depending on endianness; fortunately, TASKFILE only uses inflags.b.data bit and ignores all other bits. The end result is that, on any endian machines, it has no effect other than modifying in_flags on completion. @@ -720,7 +720,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile [6] Do not access {in|out}_flags->all except for resetting all the bits. Always access individual bit fields. ->all - value will flip depending on endianess. For the same + value will flip depending on endianness. For the same reason, do not use IDE_{TASKFILE|HOB}_STD_{OUT|IN}_FLAGS constants defined in hdreg.h. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 44e2649fbb2..a686f9cd69c 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -117,7 +117,7 @@ applicable everywhere (see syntax). This attribute is only applicable to menu blocks, if the condition is false, the menu block is not displayed to the user (the symbols contained there can still be selected by other symbols, though). It is - similar to a conditional "prompt" attribude for individual menu + similar to a conditional "prompt" attribute for individual menu entries. Default value of "visible" is true. - numerical ranges: "range" <symbol> <symbol> ["if" <expr>] diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d99fd9c0ec0..8cadb7551fc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -950,7 +950,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. controller i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers - i8042.notimeout [HW] Ignore timeout condition signalled by conroller + i8042.notimeout [HW] Ignore timeout condition signalled by controller i8042.reset [HW] Reset the controller during init and cleanup i8042.unlock [HW] Unlock (ignore) the keylock @@ -2440,7 +2440,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. For more information see Documentation/vm/slub.txt. slub_min_order= [MM, SLUB] - Determines the mininum page order for slabs. Must be + Determines the minimum page order for slabs. Must be lower than slub_max_order. For more information see Documentation/vm/slub.txt. @@ -2606,7 +2606,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. threadirqs [KNL] Force threading of all interrupt handlers except those - marked explicitely IRQF_NO_THREAD. + marked explicitly IRQF_NO_THREAD. topology= [S390] Format: {off | on} diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt index 6e0d2a9613e..f648eb26518 100644 --- a/Documentation/networking/fore200e.txt +++ b/Documentation/networking/fore200e.txt @@ -44,7 +44,7 @@ the 'software updates' pages. The firmware binaries are part of the various ForeThought software distributions. Notice that different versions of the PCA-200E firmware exist, depending -on the endianess of the host architecture. The driver is shipped with +on the endianness of the host architecture. The driver is shipped with both little and big endian PCA firmware images. Name and location of the new firmware images can be set at kernel diff --git a/Documentation/numastat.txt b/Documentation/numastat.txt index 9fcc9a608dc..520327790d5 100644 --- a/Documentation/numastat.txt +++ b/Documentation/numastat.txt @@ -5,18 +5,23 @@ Numa policy hit/miss statistics All units are pages. Hugepages have separate counters. -numa_hit A process wanted to allocate memory from this node, - and succeeded. -numa_miss A process wanted to allocate memory from another node, - but ended up with memory from this node. -numa_foreign A process wanted to allocate on this node, - but ended up with memory from another one. -local_node A process ran on this node and got memory from it. -other_node A process ran on this node and got memory from another node. -interleave_hit Interleaving wanted to allocate from this node - and succeeded. +numa_hit A process wanted to allocate memory from this node, + and succeeded. + +numa_miss A process wanted to allocate memory from another node, + but ended up with memory from this node. + +numa_foreign A process wanted to allocate on this node, + but ended up with memory from another one. + +local_node A process ran on this node and got memory from it. + +other_node A process ran on this node and got memory from another node. + +interleave_hit Interleaving wanted to allocate from this node + and succeeded. For easier reading you can use the numastat utility from the numactl package -(ftp://ftp.suse.com/pub/people/ak/numa/numactl*). Note that it only works +(http://oss.sgi.com/projects/libnuma/). Note that it only works well right now on machines with a small number of CPUs. diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index c56ec99d7b2..2f6d595f95e 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -1718,7 +1718,7 @@ Changes from 20040319 to 20040326 * lpfc_els_timeout_handler() now uses system timer. * Further cleanup of #ifdef powerpc * lpfc_scsi_timeout_handler() now uses system timer. - * Replace common driver's own defines for endianess w/ Linux's + * Replace common driver's own defines for endianness w/ Linux's __BIG_ENDIAN etc. * Added #ifdef IPFC for all IPFC specific code. * lpfc_disc_retry_rptlun() now uses system timer. diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 57566bacb4c..83f8ea8b79e 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -510,7 +510,7 @@ i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added. 3 Older Version : 00.00.02.02 i. Register 16 byte CDB capability with scsi midlayer - "Ths patch properly registers the 16 byte command length capability of the + "This patch properly registers the 16 byte command length capability of the megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas hardware supports 16 byte CDB's." diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt index 0a22ab8ea0c..51be20a6a14 100644 --- a/Documentation/scsi/scsi-generic.txt +++ b/Documentation/scsi/scsi-generic.txt @@ -62,7 +62,7 @@ There are two packages of sg utilities: and earlier Both packages will work in the lk 2.4 series however sg3_utils offers more capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and -freshmeat.net +freecode.com Another approach is to look at the applications that use the sg driver. These include cdrecord, cdparanoia, SANE and cdrdao. diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 61c0531e044..3303d218b32 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -102,7 +102,7 @@ So take at least the following measures: ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram -DC390F (Sym53c875) accepted this as well as my Millenium. But the Am53C974 +DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974 produced errors and started to corrupt my disks. So don't do that! A 37.50 MHz PCI bus works for me, though, but I don't recommend using higher clocks than the 33.33 MHz being in the PCI spec. diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index e9dab41c0fe..d2f72ae6643 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -536,6 +536,6 @@ writing a single character to the /smack/logging file : 3 : log denied & accepted Events are logged as 'key=value' pairs, for each event you at least will get -the subjet, the object, the rights requested, the action, the kernel function +the subject, the object, the rights requested, the action, the kernel function that triggered the event, plus other pairs depending on the type of event audited. diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt index c9e4855ed3d..e105ae97a4f 100644 --- a/Documentation/security/keys-trusted-encrypted.txt +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -1,7 +1,7 @@ Trusted and Encrypted Keys Trusted and Encrypted Keys are two new key types added to the existing kernel -key ring service. Both of these new types are variable length symmetic keys, +key ring service. Both of these new types are variable length symmetric keys, and in both cases all keys are created in the kernel, and user space sees, stores, and loads only encrypted blobs. Trusted Keys require the availability of a Trusted Platform Module (TPM) chip for greater security, while Encrypted diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 4d75931d2d7..fcbe7a70340 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -668,7 +668,7 @@ The keyctl syscall functions are: If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call mark the key as negative before the - invoked process returns if it is unable to fulfil the request. + invoked process returns if it is unable to fulfill the request. The process must have write access on the key to be able to instantiate it, and the key must be uninstantiated. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 936699e4f04..12e3a0fb9be 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1588,7 +1588,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports autoprobe a chip. - Note: the driver may have problems regarding endianess. + Note: the driver may have problems regarding endianness. The power-management is supported. diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 6e21b8b5263..a78879b01f0 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -775,7 +775,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " struct " + fabric_mod_name + "_nacl *nacl;\n\n" buf += " nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n" buf += " if (!nacl) {\n" - buf += " printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n" + buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_nacl\\n\");\n" buf += " return NULL;\n" buf += " }\n\n" buf += " return &nacl->se_node_acl;\n" diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt index 96d87b67fe3..cf794af2285 100644 --- a/Documentation/trace/events-power.txt +++ b/Documentation/trace/events-power.txt @@ -57,7 +57,7 @@ power_end "cpu_id=%lu" The 'type' parameter takes one of those macros: . POWER_NONE = 0, . POWER_CSTATE = 1, /* C-State */ - . POWER_PSTATE = 2, /* Fequency change or DVFS */ + . POWER_PSTATE = 2, /* Frequency change or DVFS */ The 'state' parameter is set depending on the type: . Target C-state for type=POWER_CSTATE, diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt index 86302cd53ed..a91adb26ea7 100644 --- a/Documentation/usb/mtouchusb.txt +++ b/Documentation/usb/mtouchusb.txt @@ -1,7 +1,7 @@ CHANGES - 0.3 - Created based off of scanner & INSTALL from the original touchscreen - driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver) + driver on freecode (http://freecode.com/projects/3mtouchscreendriver) - Amended for linux-2.4.18, then 2.4.19 - 0.5 - Complete rewrite using Linux Input in 2.6.3 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 12511c98cc4..817df299ea0 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -345,7 +345,7 @@ autosuspend the device. Drivers need not be concerned about balancing changes to the usage counter; the USB core will undo any remaining "get"s when a driver is unbound from its interface. As a corollary, drivers must not call -any of the usb_autopm_* functions after their diconnect() routine has +any of the usb_autopm_* functions after their disconnect() routine has returned. Drivers using the async routines are responsible for their own diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index afe596d5f20..c9c3f0f5ad7 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -7,7 +7,7 @@ The usbfs filesystem for USB devices is traditionally mounted at /proc/bus/usb. It provides the /proc/bus/usb/devices file, as well as the /proc/bus/usb/BBB/DDD files. -In many modern systems the usbfs filsystem isn't used at all. Instead +In many modern systems the usbfs filesystem isn't used at all. Instead USB device nodes are created under /dev/usb/ or someplace similar. The "devices" file is available in debugfs, typically as /sys/kernel/debug/usb/devices. diff --git a/Documentation/video4linux/uvcvideo.txt b/Documentation/video4linux/uvcvideo.txt index 848d620dcc5..35ce19cddcf 100644 --- a/Documentation/video4linux/uvcvideo.txt +++ b/Documentation/video4linux/uvcvideo.txt @@ -116,7 +116,7 @@ Description: A UVC control can be mapped to several V4L2 controls. For instance, a UVC pan/tilt control could be mapped to separate pan and tilt V4L2 controls. The UVC control is divided into non overlapping fields using - the 'size' and 'offset' fields and are then independantly mapped to + the 'size' and 'offset' fields and are then independently mapped to V4L2 control. For signed integer V4L2 controls the data_type field should be set to diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 5dc972c09b5..fa5f1dbc6b2 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -347,7 +347,7 @@ To instantiate a large spte, four constraints must be satisfied: - the spte must point to a large host page - the guest pte must be a large pte of at least equivalent size (if tdp is - enabled, there is no guest pte and this condition is satisified) + enabled, there is no guest pte and this condition is satisfied) - if the spte will be writeable, the large page frame may not overlap any write-protected pages - the guest page must be wholly contained by a single memory slot @@ -356,7 +356,7 @@ To check the last two conditions, the mmu maintains a ->write_count set of arrays for each memory slot and large page size. Every write protected page causes its write_count to be incremented, thus preventing instantiation of a large spte. The frames at the end of an unaligned memory slot have -artificically inflated ->write_counts so they can never be instantiated. +artificially inflated ->write_counts so they can never be instantiated. Further reading =============== diff --git a/Documentation/virtual/virtio-spec.txt b/Documentation/virtual/virtio-spec.txt index a350ae135b8..da094737e2f 100644 --- a/Documentation/virtual/virtio-spec.txt +++ b/Documentation/virtual/virtio-spec.txt @@ -1403,7 +1403,7 @@ segmentation, if both guests are amenable. Packets are transmitted by placing them in the transmitq, and buffers for incoming packets are placed in the receiveq. In each -case, the packet itself is preceeded by a header: +case, the packet itself is preceded by a header: struct virtio_net_hdr { @@ -1642,7 +1642,7 @@ struct virtio_net_ctrl_mac { The device can filter incoming packets by any number of destination MAC addresses.[footnote: -Since there are no guarentees, it can use a hash filter +Since there are no guarantees, it can use a hash filter orsilently switch to allmulti or promiscuous mode if it is given too many addresses. ] This table is set using the class VIRTIO_NET_CTRL_MAC and the @@ -1805,7 +1805,7 @@ the FLUSH and FLUSH_OUT types are equivalent, the device does not distinguish between them ]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit (VIRTIO_BLK_T_BARRIER) indicates that this request acts as a -barrier and that all preceeding requests must be complete before +barrier and that all preceding requests must be complete before this one, and all following requests must not be started until this is complete. Note that a barrier does not flush caches in the underlying backend device in host, and thus does not serve as @@ -2118,7 +2118,7 @@ This is historical, and independent of the guest page size Otherwise, the guest may begin to re-use pages previously given to the balloon before the device has acknowledged their - withdrawl. [footnote: + withdrawal. [footnote: In this case, deflation advice is merely a courtesy ] diff --git a/Documentation/vm/cleancache.txt b/Documentation/vm/cleancache.txt index 36c367c7308..d5c615af10b 100644 --- a/Documentation/vm/cleancache.txt +++ b/Documentation/vm/cleancache.txt @@ -92,7 +92,7 @@ failed_gets - number of gets that failed puts - number of puts attempted (all "succeed") flushes - number of flushes attempted -A backend implementatation may provide additional metrics. +A backend implementation may provide additional metrics. FAQ diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 97bae3c576c..fa206cccf89 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -538,7 +538,7 @@ different reverse map mechanisms. process because mlocked pages are migratable. However, for reclaim, if the page is mapped into a VM_LOCKED VMA, the scan stops. - try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of + try_to_unmap_anon() attempts to acquire in read mode the mmap semaphore of the mm_struct to which the VMA belongs. If this is successful, it will mlock the page via mlock_vma_page() - we wouldn't have gotten to try_to_unmap_anon() if the page were already mlocked - and will return @@ -619,11 +619,11 @@ all PTEs from the page. For this purpose, the unevictable/mlock infrastructure introduced a variant of try_to_unmap() called try_to_munlock(). try_to_munlock() calls the same functions as try_to_unmap() for anonymous and -mapped file pages with an additional argument specifing unlock versus unmap +mapped file pages with an additional argument specifying unlock versus unmap processing. Again, these functions walk the respective reverse maps looking for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions -attempt to acquire the associated mmap semphore, mlock the page via +attempt to acquire the associated mmap semaphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page. @@ -641,7 +641,7 @@ with it - the usual fallback position. Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA. However, the scan can terminate when it encounters a VM_LOCKED VMA and can -successfully acquire the VMA's mmap semphore for read and mlock the page. +successfully acquire the VMA's mmap semaphore for read and mlock the page. Although try_to_munlock() might be called a great many times when munlocking a large region or tearing down a large address space that has been mlocked via mlockall(), overall this is a fairly rare event. diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 4b93c28e35c..9e162465b0c 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -167,4 +167,4 @@ driver specific data to and a pointer to the data itself. The watchdog_get_drvdata function allows you to retrieve driver specific data. The argument of this function is the watchdog device where you want to retrieve -data from. The function retruns the pointer to the driver specific data. +data from. The function returns the pointer to the driver specific data. diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h index 13cd4274381..72dbf235927 100644 --- a/arch/alpha/include/asm/machvec.h +++ b/arch/alpha/include/asm/machvec.h @@ -90,7 +90,7 @@ struct alpha_machine_vector void (*kill_arch)(int); u8 (*pci_swizzle)(struct pci_dev *, u8 *); - int (*pci_map_irq)(struct pci_dev *, u8, u8); + int (*pci_map_irq)(const struct pci_dev *, u8, u8); struct pci_ops *pci_ops; struct _alpha_agp_info *(*agp_info)(void); diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index bb7f0c7cb17..13f0717fc7f 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -366,7 +366,7 @@ clipper_init_irq(void) */ static int __init -isa_irq_fixup(struct pci_dev *dev, int irq) +isa_irq_fixup(const struct pci_dev *dev, int irq) { u8 irq8; diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1024396797e..e5fd241fccd 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -35,7 +35,6 @@ #include <linux/pfn.h> #include <linux/atomic.h> -#include <linux/sched.h> #include <mach/dma.h> /* ---- Public Variables ------------------------------------------------- */ diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index d6f6502ac9b..4bd70754729 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/gpio.h> #include <asm/leds.h> #include <mach/devices.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 453809359ba..4c5ce7d829c 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " + printk(KERN_ERR "DMA virtual resolution is not supported " "in 1510 mode\n"); BUG(); } diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index a104d5a80e1..e52108c9aae 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -214,7 +214,7 @@ void __init db88f5281_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "db88f5281_pci_preinit faield to " + printk(KERN_ERR "db88f5281_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -227,7 +227,7 @@ void __init db88f5281_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "db88f5281_pci_preinit faield " + printk(KERN_ERR "db88f5281_pci_preinit failed " "to set_irq_type pin %d\n", pin); gpio_free(pin); } diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 96438b6b202..e3ce6171147 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -149,7 +149,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -162,7 +162,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a5e46b4ade2..4f7f5182dd4 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -469,7 +469,7 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, if (pmx_driver.base) { ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no" + printk(KERN_ERR "padmux: registration failed. err no" ": %d\n", ret); /* Free Mapping, device selection already done */ iounmap(pmx_driver.base); diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 9004cf9f01b..febaa6fcfb6 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -303,6 +303,6 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + printk(KERN_ERR "padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index ee29bef4307..deaaf199612 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -550,6 +550,6 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + printk(KERN_ERR "padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5dc7d127a40..245a55a0a5b 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/memblock.h> #include "mm.h" diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 68296b1fe7e..699f9317129 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -52,7 +52,7 @@ static __init int pm_simtec_init(void) !machine_is_aml_m5900()) return 0; - printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n"); gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c index b279e142c63..3bb12230721 100644 --- a/arch/ia64/xen/irq_xen.c +++ b/arch/ia64/xen/irq_xen.c @@ -58,7 +58,7 @@ xen_free_irq_vector(int vector) irq_op.vector = vector; if (HYPERVISOR_physdev_op(PHYSDEVOP_free_irq_vector, &irq_op)) - printk(KERN_WARNING "%s: xen_free_irq_vecotr fail vector=%d\n", + printk(KERN_WARNING "%s: xen_free_irq_vector fail vector=%d\n", __func__, vector); } diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index d209f85d87b..356b05583e1 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -33,7 +33,7 @@ static void bcm6348_a1_reboot(void) u32 reg; /* soft reset all blocks */ - printk(KERN_INFO "soft-reseting all blocks ...\n"); + printk(KERN_INFO "soft-resetting all blocks ...\n"); reg = bcm_perf_readl(PERF_SOFTRESET_REG); reg &= ~SOFTRESET_6348_ALL; bcm_perf_writel(reg, PERF_SOFTRESET_REG); diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h index fc195d0b3c3..2156315d8a9 100644 --- a/arch/powerpc/include/asm/keylargo.h +++ b/arch/powerpc/include/asm/keylargo.h @@ -21,7 +21,7 @@ #define KEYLARGO_FCR4 0x48 #define KEYLARGO_FCR5 0x4c /* Pangea only */ -/* K2 aditional FCRs */ +/* K2 additional FCRs */ #define K2_FCR6 0x34 #define K2_FCR7 0x30 #define K2_FCR8 0x2c diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug index a1f346df0a7..d8a9b2d146e 100644 --- a/arch/score/Kconfig.debug +++ b/arch/score/Kconfig.debug @@ -22,7 +22,7 @@ config RUNTIME_DEBUG help If you say Y here, some debugging macros will do run-time checking. If you say N here, those macros will mostly turn to no-ops. See - include/asm-score/debug.h for debuging macros. + include/asm-score/debug.h for debugging macros. If unsure, say N. endmenu diff --git a/arch/x86/platform/scx200/scx200_32.c b/arch/x86/platform/scx200/scx200_32.c index 7e004acbe52..7a9ad30d6c9 100644 --- a/arch/x86/platform/scx200/scx200_32.c +++ b/arch/x86/platform/scx200/scx200_32.c @@ -17,8 +17,6 @@ /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) -#define NAME "scx200" - MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); MODULE_DESCRIPTION("NatSemi SCx200 Driver"); MODULE_LICENSE("GPL"); @@ -29,10 +27,10 @@ unsigned long scx200_gpio_shadow[2]; unsigned scx200_cb_base = 0; static struct pci_device_id scx200_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, { }, }; MODULE_DEVICE_TABLE(pci,scx200_tbl); @@ -63,10 +61,11 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { base = pci_resource_start(pdev, 0); - printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); + pr_info("GPIO base 0x%x\n", base); - if (!request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO")) { - printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); + if (!request_region(base, SCx200_GPIO_SIZE, + "NatSemi SCx200 GPIO")) { + pr_err("can't allocate I/O for GPIOs\n"); return -EBUSY; } @@ -82,11 +81,11 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ if (scx200_cb_probe(base)) { scx200_cb_base = base; } else { - printk(KERN_WARNING NAME ": Configuration Block not found\n"); + pr_warn("Configuration Block not found\n"); return -ENODEV; } } - printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); + pr_info("Configuration Block base 0x%x\n", scx200_cb_base); } return 0; @@ -111,8 +110,7 @@ u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) static int __init scx200_init(void) { - printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); - + pr_info("NatSemi SCx200 Driver\n"); return pci_register_driver(&scx200_pci_driver); } diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c index 1f3c1a7d132..38a2d063188 100644 --- a/drivers/block/nvme.c +++ b/drivers/block/nvme.c @@ -39,7 +39,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/types.h> -#include <linux/version.h> #include <asm-generic/io-64-nonatomic-lo-hi.h> diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index da3cfee782d..eaade8a1ecd 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -94,7 +94,7 @@ /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with * rtc_lock held. Due to the index-port/data-port design of the RTC, we * don't want two different things trying to get to it at once. (e.g. the - * periodic 11 min sync from time.c vs. this driver.) + * periodic 11 min sync from kernel/time/ntp.c vs. this driver.) */ #include <linux/types.h> diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index ccd124ab7ca..872e09a02d2 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -57,8 +57,8 @@ * Note that *all* calls to CMOS_READ and CMOS_WRITE are done with * interrupts disabled. Due to the index-port/data-port (0x70/0x71) * design of the RTC, we don't want two different things trying to - * get to it at once. (e.g. the periodic 11 min sync from time.c vs. - * this driver.) + * get to it at once. (e.g. the periodic 11 min sync from + * kernel/time/ntp.c vs. this driver.) */ #include <linux/interrupt.h> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index a1748621111..70fac9abb0e 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -76,7 +76,7 @@ enum tis_defaults { #define TPM_RID(l) (0x0F04 | ((l) << 12)) static LIST_HEAD(tis_chips); -static DEFINE_SPINLOCK(tis_lock); +static DEFINE_MUTEX(tis_lock); #if defined(CONFIG_PNP) && defined(CONFIG_ACPI) static int is_itpm(struct pnp_dev *dev) @@ -689,9 +689,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, } INIT_LIST_HEAD(&chip->vendor.list); - spin_lock(&tis_lock); + mutex_lock(&tis_lock); list_add(&chip->vendor.list, &tis_chips); - spin_unlock(&tis_lock); + mutex_unlock(&tis_lock); return 0; @@ -855,7 +855,7 @@ static void __exit cleanup_tis(void) { struct tpm_vendor_specific *i, *j; struct tpm_chip *chip; - spin_lock(&tis_lock); + mutex_lock(&tis_lock); list_for_each_entry_safe(i, j, &tis_chips, list) { chip = to_tpm_chip(i); tpm_remove_hardware(chip->dev); @@ -871,7 +871,7 @@ static void __exit cleanup_tis(void) iounmap(i->iobase); list_del(&i->list); } - spin_unlock(&tis_lock); + mutex_unlock(&tis_lock); #ifdef CONFIG_PNP if (!force) { pnp_unregister_driver(&tis_pnp_driver); diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 04be90b645b..faf88b7e1e7 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1482,7 +1482,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev) goto err_free_adev; } - dev_dbg(&pdev->dev, "%s: allocted descriptor pool virt %p phys %p\n", + dev_dbg(&pdev->dev, "%s: allocated descriptor pool virt %p phys %p\n", __func__, adev->dma_desc_pool_virt, (void *) adev->dma_desc_pool); diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c index a25e4ca5e91..0a437586d8c 100644 --- a/drivers/gpu/drm/gma500/psb_intel_lvds.c +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c @@ -713,7 +713,6 @@ void psb_intel_lvds_init(struct drm_device *dev, psb_intel_encoder = kzalloc(sizeof(struct psb_intel_encoder), GFP_KERNEL); - if (!psb_intel_encoder) { dev_err(dev->dev, "psb_intel_encoder allocation error\n"); return; @@ -721,10 +720,9 @@ void psb_intel_lvds_init(struct drm_device *dev, psb_intel_connector = kzalloc(sizeof(struct psb_intel_connector), GFP_KERNEL); - if (!psb_intel_connector) { - kfree(psb_intel_encoder); dev_err(dev->dev, "psb_intel_connector allocation error\n"); + goto failed_encoder; } lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL); @@ -862,7 +860,8 @@ failed_blc_i2c: drm_encoder_cleanup(encoder); drm_connector_cleanup(connector); failed_connector: - if (psb_intel_connector) - kfree(psb_intel_connector); + kfree(psb_intel_connector); +failed_encoder: + kfree(psb_intel_encoder); } diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 959bf4483be..c520d06a930 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -150,7 +150,7 @@ void rv515_gpu_init(struct radeon_device *rdev) if (r100_gui_wait_for_idle(rdev)) { printk(KERN_WARNING "Failed to wait GUI idle while " - "reseting GPU. Bad things might happen.\n"); + "resetting GPU. Bad things might happen.\n"); } rv515_vga_render_disable(rdev); r420_pipes_init(rdev); @@ -162,7 +162,7 @@ void rv515_gpu_init(struct radeon_device *rdev) WREG32_PLL(0x000D, tmp); if (r100_gui_wait_for_idle(rdev)) { printk(KERN_WARNING "Failed to wait GUI idle while " - "reseting GPU. Bad things might happen.\n"); + "resetting GPU. Bad things might happen.\n"); } if (rv515_mc_wait_for_idle(rdev)) { printk(KERN_WARNING "Failed to wait MC idle while " diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index f390f5f9cb6..2d6f573bfff 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -430,7 +430,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) svga_id = vmw_read(dev_priv, SVGA_REG_ID); if (svga_id != SVGA_ID_2) { ret = -ENOSYS; - DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id); + DRM_ERROR("Unsupported SVGA ID 0x%x\n", svga_id); mutex_unlock(&dev_priv->hw_mutex); goto out_err0; } diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 8b9a77486d5..951442adc06 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -624,7 +624,7 @@ static int tmp401_probe(struct i2c_client *client, goto exit_remove; } - /* Register aditional tmp411 sysfs hooks */ + /* Register additional tmp411 sysfs hooks */ if (data->kind == tmp411) { for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) { err = device_create_file(&client->dev, diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 2b73d43cd69..ebe33d960d7 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -3450,7 +3450,7 @@ static struct se_node_acl *srpt_alloc_fabric_acl(struct se_portal_group *se_tpg) nacl = kzalloc(sizeof(struct srpt_node_acl), GFP_KERNEL); if (!nacl) { - printk(KERN_ERR "Unable to alocate struct srpt_node_acl\n"); + printk(KERN_ERR "Unable to allocate struct srpt_node_acl\n"); return NULL; } diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a08a53448b7..132f93b0515 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1247,7 +1247,7 @@ static int iommu_init_domains(struct intel_iommu *iommu) unsigned long nlongs; ndomains = cap_ndoms(iommu->cap); - pr_debug("IOMMU %d: Number of Domains supportd <%ld>\n", iommu->seq_id, + pr_debug("IOMMU %d: Number of Domains supported <%ld>\n", iommu->seq_id, ndomains); nlongs = BITS_TO_LONGS(ndomains); diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 2fd435bc542..831d7517c75 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -356,7 +356,7 @@ static void poll_media_bay(struct media_bay_info* bay) static char *mb_content_types[] = { "a floppy drive", "a floppy drive", - "an unsuported audio device", + "an unsupported audio device", "an ATA device", "an unsupported PCI device", "an unknown device", diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 0a6806f80ab..b6e58c7b6df 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -12,7 +12,6 @@ #include <linux/dm-io.h> #include <linux/slab.h> #include <linux/vmalloc.h> -#include <linux/version.h> #include <linux/shrinker.h> #include <linux/module.h> diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index b3fe05bbffc..291f6b11039 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -1054,7 +1054,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) if (ret) info("TUN Found %s tuner", tun_msg[ret]); else { - info("TUN No tuner found --- reseting device"); + info("TUN No tuner found --- resetting device"); lme_coldreset(adap->dev->udev); return -ENODEV; } diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 6980ed7b878..5ab53795bd7 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -28,7 +28,6 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/version.h> #include <asm/div64.h> #include "dvb_frontend.h" diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index ae6f22aae67..35d72b46aa1 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1272,7 +1272,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, /* allocate memory for the internal state */ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); if (!state) { - printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); + printk(KERN_ERR "Can't allocate memory for tda10045 state\n"); return NULL; } @@ -1342,7 +1342,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, /* allocate memory for the internal state */ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); if (!state) { - printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); + printk(KERN_ERR "Can't allocate memory for tda10046 state\n"); return NULL; } diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 672cf4d2462..10c68df7e16 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -76,7 +76,7 @@ static int mantis_hif_write_wait(struct mantis_ca *ca) udelay(500); timeout++; if (timeout > 100) { - dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num); rc = -ETIMEDOUT; break; } diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 2dd485996ba..7ab9afadf29 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -172,7 +172,7 @@ static int fmr2_tea_ext_init(struct snd_tea575x *tea) fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56); fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0); if (tea->ctrl_handler.error) { - printk(KERN_ERR "radio-sf16fmr2: can't initialize contrls\n"); + printk(KERN_ERR "radio-sf16fmr2: can't initialize controls\n"); return tea->ctrl_handler.error; } } diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c index f83baf3a52b..5b68847d401 100644 --- a/drivers/media/video/davinci/dm355_ccdc.c +++ b/drivers/media/video/davinci/dm355_ccdc.c @@ -292,7 +292,7 @@ static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) if ((ccdcparam->med_filt_thres < 0) || (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { dev_dbg(ccdc_cfg.dev, - "Invalid value of median filter thresold\n"); + "Invalid value of median filter threshold\n"); return -EINVAL; } diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index 6806345ec2f..3627f3225bb 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -649,7 +649,7 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) clkrc = CLKRC_24MHz; } else { dev_err(&client->dev, - "unspported input clock, check platform data\n"); + "unsupported input clock, check platform data\n"); return -EINVAL; } mclk = sense->master_clock; diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index bd56a764dea..54d0fe40845 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -28,7 +28,6 @@ #include <linux/bitops.h> #include <linux/spinlock.h> #include <linux/mfd/core.h> -#include <linux/version.h> #include <linux/mfd/db5500-prcmu.h> #include "ab5500-core.h" diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 1bcfd6dbb5c..c3622a69f43 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1606,7 +1606,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { dev_err(&pdev->dev, - "failed to get io memory region resouce.\n"); + "failed to get io memory region resource.\n"); ret = -ENOENT; goto probe_free_gpio; @@ -1630,7 +1630,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) host->irq = platform_get_irq(pdev, 0); if (host->irq == 0) { - dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + dev_err(&pdev->dev, "failed to get interrupt resource.\n"); ret = -EINVAL; goto probe_iounmap; } diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c index da1f96f385c..0bbc61ba952 100644 --- a/drivers/mtd/chips/chipreg.c +++ b/drivers/mtd/chips/chipreg.c @@ -76,10 +76,7 @@ struct mtd_info *do_map_probe(const char *name, struct map_info *map) */ module_put(drv->module); - if (ret) - return ret; - - return NULL; + return ret; } /* * Destroy an MTD device which was created for a map device. diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index aa15cc4269a..50f87b60b0b 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -1466,7 +1466,7 @@ static int prism2_hw_enable(struct net_device *dev, int initial) * before it starts acting as an AP, so reset port automatically * here just in case */ if (initial && prism2_reset_port(dev)) { - printk("%s: MAC port 0 reseting failed\n", dev->name); + printk("%s: MAC port 0 resetting failed\n", dev->name); return 1; } @@ -1557,7 +1557,7 @@ static void prism2_hw_reset(struct net_device *dev) static long last_reset = 0; /* do not reset card more than once per second to avoid ending up in a - * busy loop reseting the card */ + * busy loop resetting the card */ if (time_before_eq(jiffies, last_reset + HZ)) return; last_reset = jiffies; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 9fcde36d501..c9e2660e126 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -856,7 +856,7 @@ reset_device: /* semaphore stuck, reset device to avoid fw freeze later */ dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, " - "reseting device..."); + "resetting device..."); usb_queue_reset_device(mac->chip.usb.intf); return r; diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 785bdbe38f2..f766b3e67c6 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1104,7 +1104,7 @@ static void zd_tx_watchdog_handler(struct work_struct *work) goto out; /* TX halted, try reset */ - dev_warn(zd_usb_dev(usb), "TX-stall detected, reseting device..."); + dev_warn(zd_usb_dev(usb), "TX-stall detected, resetting device..."); usb_queue_reset_device(usb->intf); diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index 5a34973dc16..ba68d4e7a77 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -379,7 +379,7 @@ static ssize_t hdaps_temp1_show(struct device *dev, int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); - if (ret < 0) + if (ret) return ret; return sprintf(buf, "%u\n", temp); @@ -392,7 +392,7 @@ static ssize_t hdaps_temp2_show(struct device *dev, int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); - if (ret < 0) + if (ret) return ret; return sprintf(buf, "%u\n", temp); diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 1ed6ea0bad6..222ccd872ac 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -47,10 +47,10 @@ #define BQ27x00_REG_TTE 0x16 #define BQ27x00_REG_TTF 0x18 #define BQ27x00_REG_TTECP 0x26 -#define BQ27x00_REG_NAC 0x0C /* Nominal available capaciy */ +#define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */ #define BQ27x00_REG_LMD 0x12 /* Last measured discharge */ #define BQ27x00_REG_CYCT 0x2A /* Cycle count total */ -#define BQ27x00_REG_AE 0x22 /* Available enery */ +#define BQ27x00_REG_AE 0x22 /* Available energy */ #define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ #define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 5f8617dd43b..25417d0e7ac 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -8993,7 +8993,7 @@ ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) printk("Invalid Command IU Field\n"); break; case SIU_PFC_TMF_NOT_SUPPORTED: - printk("TMF not supportd\n"); + printk("TMF not supported\n"); break; case SIU_PFC_TMF_FAILED: printk("TMF failed\n"); @@ -9113,7 +9113,7 @@ ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) break; } case SCSI_STATUS_OK: - printk("%s: Interrupted for staus of 0???\n", + printk("%s: Interrupted for status of 0???\n", ahd_name(ahd)); /* FALLTHROUGH */ default: diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index dc28b0a91b2..10172a3af1b 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -1049,7 +1049,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat) ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status); switch (hscb->shared_data.status.scsi_status) { case SCSI_STATUS_OK: - printk("%s: Interrupted for staus of 0???\n", + printk("%s: Interrupted for status of 0???\n", ahc_name(ahc)); break; case SCSI_STATUS_CMD_TERMINATED: diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 418391b1c36..6ca9b26bb2f 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -58,7 +58,6 @@ #include "host.h" #include "isci.h" #include "port.h" -#include "host.h" #include "probe_roms.h" #include "remote_device.h" #include "request.h" diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 36ea0b2d802..2b4d37613d3 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -149,7 +149,7 @@ _config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, desc = "raid_config"; break; case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: - desc = "driver_mappping"; + desc = "driver_mapping"; break; } break; diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index b7b92f7be2a..e12c4f632a6 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3532,7 +3532,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) break; case OPC_OUB_DEREG_DEV: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unresgister the deviece\n")); + pm8001_printk("unregister the device\n")); mpi_dereg_resp(pm8001_ha, piomb); break; case OPC_OUB_GET_DEV_HANDLE: diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index ca496c7474e..e1d150f3fd4 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -857,11 +857,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { {0x01180600, IOASC_LOG_LEVEL_HARD, "Recovered Error, soft media error, sector reassignment suggested"}, {0x015D0000, IOASC_LOG_LEVEL_HARD, - "Recovered Error, failure prediction thresold exceeded"}, + "Recovered Error, failure prediction threshold exceeded"}, {0x015D9200, IOASC_LOG_LEVEL_HARD, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x015D9200, IOASC_LOG_LEVEL_HARD, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x02048000, IOASC_LOG_LEVEL_HARD, "Not Ready, IOA Reset Required"}, {0x02408500, IOASC_LOG_LEVEL_HARD, diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 1682e2e4201..2c4714279bc 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -731,7 +731,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if (elreq.options != EXTERNAL_LOOPBACK) { ql_dbg(ql_dbg_user, vha, 0x7020, - "Internal: curent port config = %x\n", + "Internal: current port config = %x\n", config[0]); if (qla81xx_set_internal_loopback(vha, config, new_config)) { diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index ce6d3b7f0c6..edf503437e9 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -3382,7 +3382,7 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) if (qla4xxx_get_flash(ha, buf_dma, addr, 13 * sizeof(uint8_t)) != QLA_SUCCESS) { DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash" - "failed\n", ha->host_no, __func__)); + " failed\n", ha->host_no, __func__)); ret = QLA_ERROR; goto exit_boot_info_free; } @@ -3620,7 +3620,7 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) if (ql4xdisablesysfsboot) { ql4_printk(KERN_INFO, ha, - "%s: syfsboot disabled - driver will trigger login" + "%s: syfsboot disabled - driver will trigger login " "and publish session for discovery .\n", __func__); return QLA_SUCCESS; } diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c index ce2d6193dd8..2415a6e60c7 100644 --- a/drivers/staging/iio/dac/ad5686.c +++ b/drivers/staging/iio/dac/ad5686.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/regulator/consumer.h> -#include <linux/module.h> #include "../iio.h" #include "../sysfs.h" diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 6bee4907c6a..34b1a3c4306 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -3923,7 +3923,7 @@ static void tdma_reset(struct slgt_info *info) */ static void enable_loopback(struct slgt_info *info) { - /* SCR (serial control) BIT2=looopback enable */ + /* SCR (serial control) BIT2=loopback enable */ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); if (info->params.mode != MGSL_MODE_ASYNC) { diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index d986824bb2b..c053e90f200 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -89,7 +89,6 @@ #include "disk-io.h" #include "transaction.h" #include "extent_io.h" -#include "disk-io.h" #include "volumes.h" #include "print-tree.h" #include "locking.h" diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 710ea380c7e..b02e379b14c 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1068,7 +1068,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, spin_unlock(&block_group->lock); ret = 0; #ifdef DEBUG - printk(KERN_ERR "btrfs: failed to write free space cace " + printk(KERN_ERR "btrfs: failed to write free space cache " "for block group %llu\n", block_group->key.objectid); #endif } diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c index a2ee8f9f5a3..04d51f9333d 100644 --- a/fs/cramfs/inode.c +++ b/fs/cramfs/inode.c @@ -257,10 +257,10 @@ static int cramfs_fill_super(struct super_block *sb, void *data, int silent) /* Do sanity checks on the superblock */ if (super.magic != CRAMFS_MAGIC) { - /* check for wrong endianess */ + /* check for wrong endianness */ if (super.magic == CRAMFS_MAGIC_WEND) { if (!silent) - printk(KERN_ERR "cramfs: wrong endianess\n"); + printk(KERN_ERR "cramfs: wrong endianness\n"); goto out; } @@ -270,7 +270,7 @@ static int cramfs_fill_super(struct super_block *sb, void *data, int silent) mutex_unlock(&read_mutex); if (super.magic != CRAMFS_MAGIC) { if (super.magic == CRAMFS_MAGIC_WEND && !silent) - printk(KERN_ERR "cramfs: wrong endianess\n"); + printk(KERN_ERR "cramfs: wrong endianness\n"); else if (!silent) printk(KERN_ERR "cramfs: wrong magic\n"); goto out; diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 5b4a9362d5a..77b535ac713 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -1284,7 +1284,7 @@ int writeback_inodes_sb_if_idle(struct super_block *sb, enum wb_reason reason) EXPORT_SYMBOL(writeback_inodes_sb_if_idle); /** - * writeback_inodes_sb_if_idle - start writeback if none underway + * writeback_inodes_sb_nr_if_idle - start writeback if none underway * @sb: the superblock * @nr: the number of pages to write * @reason: reason why some writeback work was initiated diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c index 5b6c9d1a2fb..96ed3c9ec3f 100644 --- a/fs/jffs2/compr.c +++ b/fs/jffs2/compr.c @@ -340,7 +340,7 @@ int jffs2_unregister_compressor(struct jffs2_compressor *comp) if (comp->usecount) { spin_unlock(&jffs2_compressor_list_lock); - printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); + printk(KERN_WARNING "JFFS2: Compressor module is in use. Unregister failed.\n"); return -1; } list_del(&comp->list); diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h index faece719086..809c0e6d8e0 100644 --- a/fs/ntfs/layout.h +++ b/fs/ntfs/layout.h @@ -2008,14 +2008,14 @@ typedef struct { * * When a directory is small enough to fit inside the index root then this * is the only attribute describing the directory. When the directory is too - * large to fit in the index root, on the other hand, two aditional attributes + * large to fit in the index root, on the other hand, two additional attributes * are present: an index allocation attribute, containing sub-nodes of the B+ * directory tree (see below), and a bitmap attribute, describing which virtual * cluster numbers (vcns) in the index allocation attribute are in use by an * index block. * * NOTE: The root directory (FILE_root) contains an entry for itself. Other - * dircetories do not contain entries for themselves, though. + * directories do not contain entries for themselves, though. */ typedef struct { ATTR_TYPE type; /* Type of the indexed attribute. Is diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c index d245cb23dd7..e5e69aff6c6 100644 --- a/fs/proc/kcore.c +++ b/fs/proc/kcore.c @@ -513,7 +513,7 @@ read_kcore(struct file *file, char __user *buffer, size_t buflen, loff_t *fpos) n = copy_to_user(buffer, (char *)start, tsz); /* - * We cannot distingush between fault on source + * We cannot distinguish between fault on source * and fault on destination. When this happens * we clear too and hope it will trigger the * EFAULT again. diff --git a/fs/reiserfs/lbalance.c b/fs/reiserfs/lbalance.c index 03d85cbf90b..b43d0155631 100644 --- a/fs/reiserfs/lbalance.c +++ b/fs/reiserfs/lbalance.c @@ -975,7 +975,7 @@ static int leaf_cut_entries(struct buffer_head *bh, remove */ RFALSE(!is_direntry_le_ih(ih), "10180: item is not directory item"); RFALSE(I_ENTRY_COUNT(ih) < from + del_count, - "10185: item contains not enough entries: entry_cout = %d, from = %d, to delete = %d", + "10185: item contains not enough entries: entry_count = %d, from = %d, to delete = %d", I_ENTRY_COUNT(ih), from, del_count); if (del_count == 0) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 4a243546d14..923d093c9ce 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -236,7 +236,7 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); /* * Rather then using noinline to prevent stack consumption, use - * noinline_for_stack instead. For documentaiton reasons. + * noinline_for_stack instead. For documentation reasons. */ #define noinline_for_stack noinline diff --git a/include/linux/pci.h b/include/linux/pci.h index d4afd703e94..b843fe79583 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -746,28 +746,28 @@ int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val); struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops); -static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val) +static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val) { return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val); } -static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val) +static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val) { return pci_bus_read_config_word(dev->bus, dev->devfn, where, val); } -static inline int pci_read_config_dword(struct pci_dev *dev, int where, +static inline int pci_read_config_dword(const struct pci_dev *dev, int where, u32 *val) { return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val) +static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val) { return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val) +static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val) { return pci_bus_write_config_word(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_dword(struct pci_dev *dev, int where, +static inline int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val) { return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); diff --git a/include/linux/security.h b/include/linux/security.h index 83c18e8c846..c8949385e56 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -812,7 +812,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * Check permissions before connecting or sending datagrams from @sock to * @other. * @sock contains the socket structure. - * @sock contains the peer socket structure. + * @other contains the peer socket structure. * Return 0 if permission is granted. * * The @unix_stream_connect and @unix_may_send hooks were necessary because diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 995b8bf630a..a2b84f598e2 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -64,7 +64,7 @@ struct writeback_control { long pages_skipped; /* Pages which were not written */ /* - * For a_ops->writepages(): is start or end are non-zero then this is + * For a_ops->writepages(): if start or end are non-zero then this is * a hint that the filesystem need only write out the pages inside that * byterange. The byte at `end' is included in the writeout request. */ diff --git a/include/trace/events/power.h b/include/trace/events/power.h index 14b38940062..cae9a94f025 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -65,7 +65,6 @@ TRACE_EVENT(machine_suspend, TP_printk("state=%lu", (unsigned long)__entry->state) ); -/* This code will be removed after deprecation time exceeded (2.6.41) */ #ifdef CONFIG_EVENT_POWER_TRACING_DEPRECATED /* diff --git a/init/main.c b/init/main.c index 4990f7ec776..c24805c824b 100644 --- a/init/main.c +++ b/init/main.c @@ -446,8 +446,8 @@ void __init __weak thread_info_cache_init(void) static void __init mm_init(void) { /* - * page_cgroup requires countinous pages as memmap - * and it's bigger than MAX_ORDER unless SPARSEMEM. + * page_cgroup requires contiguous pages, + * bigger than MAX_ORDER unless SPARSEMEM. */ page_cgroup_init_flatmem(); mem_init(); diff --git a/kernel/resource.c b/kernel/resource.c index 7640b3a947d..7e8ea66a8c0 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -749,6 +749,7 @@ int adjust_resource(struct resource *res, resource_size_t start, resource_size_t write_unlock(&resource_lock); return result; } +EXPORT_SYMBOL(adjust_resource); static void __init __reserve_region_with_split(struct resource *root, resource_size_t start, resource_size_t end, @@ -792,8 +793,6 @@ void __init reserve_region_with_split(struct resource *root, write_unlock(&resource_lock); } -EXPORT_SYMBOL(adjust_resource); - /** * resource_alignment - calculate resource's alignment * @res: resource pointer diff --git a/mm/truncate.c b/mm/truncate.c index 632b15e29f7..a188058582e 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -184,7 +184,7 @@ int invalidate_inode_page(struct page *page) } /** - * truncate_inode_pages - truncate range of pages specified by start & end byte offsets + * truncate_inode_pages_range - truncate range of pages specified by start & end byte offsets * @mapping: mapping to truncate * @lstart: offset from which to truncate * @lend: offset to which to truncate diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c index e29e0ca32f7..8d6d9702d1e 100644 --- a/net/rds/ib_recv.c +++ b/net/rds/ib_recv.c @@ -826,7 +826,7 @@ static void rds_ib_process_recv(struct rds_connection *conn, if (data_len < sizeof(struct rds_header)) { rds_ib_conn_error(conn, "incoming message " - "from %pI4 didn't inclue a " + "from %pI4 didn't include a " "header, disconnecting and " "reconnecting\n", &conn->c_faddr); diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c index 5e57347f49f..3c871700501 100644 --- a/net/rds/iw_recv.c +++ b/net/rds/iw_recv.c @@ -661,7 +661,7 @@ static void rds_iw_process_recv(struct rds_connection *conn, if (byte_len < sizeof(struct rds_header)) { rds_iw_conn_error(conn, "incoming message " - "from %pI4 didn't inclue a " + "from %pI4 didn't include a " "header, disconnecting and " "reconnecting\n", &conn->c_faddr); diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index d29d6d37790..f584f6d8ffc 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1643,7 +1643,7 @@ static void cxt5051_update_speaker(struct hda_codec *codec) pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0; snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl); - /* on ideapad there is an aditional speaker (subwoofer) to mute */ + /* on ideapad there is an additional speaker (subwoofer) to mute */ if (spec->ideapad) snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 9507c4b251a..758ec2a08c4 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2601,7 +2601,7 @@ sub config_bisect { # read directly what we want to check my %config_check; open (IN, $output_config) - or dodie "faied to open $output_config"; + or dodie "failed to open $output_config"; while (<IN>) { if (/^((CONFIG\S*)=.*)/) { |