summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/au1000/pb1550/Makefile7
-rw-r--r--arch/mips/au1000/pb1550/board_setup.c16
-rw-r--r--arch/mips/au1000/pb1550/init.c20
-rw-r--r--arch/mips/au1000/pb1550/irqmap.c6
-rw-r--r--include/asm-mips/mach-pb1x00/pb1550.h51
5 files changed, 49 insertions, 51 deletions
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile
index aa35bc6cb8c..7d8beca87fa 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/au1000/pb1550/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 45d60872b56..0ed76b64b6a 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1550 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -35,15 +34,16 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+ /* Hit BCSR.SYSTEM[RESET] */
+ au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_setup(void)
{
u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /*
+ * Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@ void __init board_setup(void)
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
- printk("AMD Alchemy Pb1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index f6b2fc58798..1b5f58434bb 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1550 board setup
+ * Pb1550 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index e1dac37af08..a02a4d1fa89 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,8 +31,8 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index c2ab0e2df4a..6704a11497d 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_PHYS_ADDR 0xAF000000
@@ -129,12 +129,12 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
@@ -144,16 +144,17 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
#define PB1550_USER_ONLY
#endif
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
* These defines are here rather than an SOC1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_PB1550_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 10:09:25 +0000