summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kconfig5
-rw-r--r--arch/mips/fw/arc/init.c8
-rw-r--r--arch/mips/kernel/mips-mt.c1
-rw-r--r--arch/mips/kernel/setup.c3
-rw-r--r--arch/mips/kernel/smp-mt.c193
-rw-r--r--arch/mips/kernel/smp.c23
-rw-r--r--arch/mips/kernel/smtc-proc.c1
-rw-r--r--arch/mips/kernel/smtc.c1
-rw-r--r--arch/mips/mips-boards/generic/init.c8
-rw-r--r--arch/mips/mips-boards/malta/malta_smtc.c66
-rw-r--r--arch/mips/mipssim/Makefile2
-rw-r--r--arch/mips/mipssim/sim_setup.c16
-rw-r--r--arch/mips/mipssim/sim_smtc.c (renamed from arch/mips/mipssim/sim_smp.c)92
-rw-r--r--arch/mips/pmc-sierra/yosemite/prom.c5
-rw-r--r--arch/mips/pmc-sierra/yosemite/smp.c149
-rw-r--r--arch/mips/qemu/q-smp.c40
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c1
-rw-r--r--arch/mips/sgi-ip27/ip27-klnuma.c1
-rw-r--r--arch/mips/sgi-ip27/ip27-smp.c109
-rw-r--r--arch/mips/sibyte/bcm1480/smp.c101
-rw-r--r--arch/mips/sibyte/cfe/Makefile1
-rw-r--r--arch/mips/sibyte/cfe/setup.c11
-rw-r--r--arch/mips/sibyte/cfe/smp.c110
-rw-r--r--arch/mips/sibyte/sb1250/smp.c100
-rw-r--r--include/asm-mips/sibyte/sb1250.h2
-rw-r--r--include/asm-mips/smp-ops.h56
-rw-r--r--include/asm-mips/smp.h61
27 files changed, 681 insertions, 485 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8cbdfd25567..b211e7961f2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1441,6 +1441,7 @@ config MIPS_MT_SMP
select SMP
select SYS_SUPPORTS_SCHED_SMT if SMP
select SYS_SUPPORTS_SMP
+ select SMP_UP
help
This is a kernel model which is also known a VSMP or lately
has been marketesed into SMVP.
@@ -1457,6 +1458,7 @@ config MIPS_MT_SMTC
select NR_CPUS_DEFAULT_8
select SMP
select SYS_SUPPORTS_SMP
+ select SMP_UP
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
@@ -1735,6 +1737,9 @@ config SMP
If you don't know what to do here, say N.
+config SMP_UP
+ bool
+
config SYS_SUPPORTS_SMP
bool
diff --git a/arch/mips/fw/arc/init.c b/arch/mips/fw/arc/init.c
index e2f75b13312..3ad8788b6ea 100644
--- a/arch/mips/fw/arc/init.c
+++ b/arch/mips/fw/arc/init.c
@@ -12,6 +12,7 @@
#include <asm/bootinfo.h>
#include <asm/sgialib.h>
+#include <asm/smp-ops.h>
#undef DEBUG_PROM_INIT
@@ -48,4 +49,11 @@ void __init prom_init(void)
ArcRead(0, &c, 1, &cnt);
ArcEnterInteractiveMode();
#endif
+#ifdef CONFIG_SGI_IP27
+ {
+ extern struct plat_smp_ops ip27_smp_ops;
+
+ register_smp_ops(&ip27_smp_ops);
+ }
+#endif
}
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 3d6b1ec1f32..640fb0cc6e3 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -17,7 +17,6 @@
#include <asm/system.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsmtregs.h>
#include <asm/r4kcache.h>
#include <asm/cacheflush.h>
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7b4418dd585..269c252d956 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -29,6 +29,7 @@
#include <asm/cpu.h>
#include <asm/sections.h>
#include <asm/setup.h>
+#include <asm/smp-ops.h>
#include <asm/system.h>
struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
@@ -575,9 +576,7 @@ void __init setup_arch(char **cmdline_p)
arch_mem_init(cmdline_p);
resource_init();
-#ifdef CONFIG_SMP
plat_smp_setup();
-#endif
}
static int __init fpu_disable(char *s)
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 2ab0b7eeaa7..89e6f6aa516 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -215,72 +215,67 @@ static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
write_tc_c0_tchalt(TCHALT_H);
}
-/*
- * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
- * secondarys
- */
-void __init plat_smp_setup(void)
+static void vsmp_send_ipi_single(int cpu, unsigned int action)
{
- unsigned int mvpconf0, ntc, tc, ncpu = 0;
- unsigned int nvpe;
+ int i;
+ unsigned long flags;
+ int vpflags;
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpu_set(0, mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
- if (!cpu_has_mipsmt)
- return;
+ local_irq_save(flags);
- /* disable MT so we can configure */
- dvpe();
- dmt();
+ vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ i = C_SW1;
+ break;
- mvpconf0 = read_c0_mvpconf0();
- ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
+ case SMP_RESCHEDULE_YOURSELF:
+ default:
+ i = C_SW0;
+ break;
+ }
- nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
- smp_num_siblings = nvpe;
+ /* 1:1 mapping of vpe and tc... */
+ settc(cpu);
+ write_vpe_c0_cause(read_vpe_c0_cause() | i);
+ evpe(vpflags);
- /* we'll always have more TC's than VPE's, so loop setting everything
- to a sensible state */
- for (tc = 0; tc <= ntc; tc++) {
- settc(tc);
+ local_irq_restore(flags);
+}
- smp_tc_init(tc, mvpconf0);
- ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
- }
+static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
- /* Release config state */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ for_each_cpu_mask(i, mask)
+ vsmp_send_ipi_single(i, action);
+}
- /* We'll wait until starting the secondaries before starting MVPE */
+static void __cpuinit vsmp_init_secondary(void)
+{
+ /* Enable per-cpu interrupts */
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+ /* This is Malta specific: IPI,performance and timer inetrrupts */
+ write_c0_status((read_c0_status() & ~ST0_IM ) |
+ (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
}
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void __cpuinit vsmp_smp_finish(void)
{
- mips_mt_set_cpuoptions();
-
- /* set up ipi interrupts */
- if (cpu_has_vint) {
- set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
- set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
- }
+ write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
- cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* If we have an FPU, enroll ourselves in the FPU-full mask */
+ if (cpu_has_fpu)
+ cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
- setup_irq(cpu_ipi_resched_irq, &irq_resched);
- setup_irq(cpu_ipi_call_irq, &irq_call);
+ local_irq_enable();
+}
- set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
- set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+static void vsmp_cpus_done(void)
+{
}
/*
@@ -291,7 +286,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* (unsigned long)idle->thread_info the gp
* assumes a 1:1 mapping of TC => VPE
*/
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
{
struct thread_info *gp = task_thread_info(idle);
dvpe();
@@ -325,57 +320,81 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
evpe(EVPE_ENABLE);
}
-void __cpuinit prom_init_secondary(void)
-{
- /* Enable per-cpu interrupts */
-
- /* This is Malta specific: IPI,performance and timer inetrrupts */
- write_c0_status((read_c0_status() & ~ST0_IM ) |
- (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
-}
-
-void __cpuinit prom_smp_finish(void)
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+static void __init vsmp_smp_setup(void)
{
- write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+ unsigned int mvpconf0, ntc, tc, ncpu = 0;
+ unsigned int nvpe;
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
if (cpu_has_fpu)
- cpu_set(smp_processor_id(), mt_fpu_cpumask);
+ cpu_set(0, mt_fpu_cpumask);
#endif /* CONFIG_MIPS_MT_FPAFF */
+ if (!cpu_has_mipsmt)
+ return;
- local_irq_enable();
-}
+ /* disable MT so we can configure */
+ dvpe();
+ dmt();
-void prom_cpus_done(void)
-{
-}
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
-void core_send_ipi(int cpu, unsigned int action)
-{
- int i;
- unsigned long flags;
- int vpflags;
+ mvpconf0 = read_c0_mvpconf0();
+ ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
- local_irq_save(flags);
+ nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+ smp_num_siblings = nvpe;
- vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
+ /* we'll always have more TC's than VPE's, so loop setting everything
+ to a sensible state */
+ for (tc = 0; tc <= ntc; tc++) {
+ settc(tc);
- switch (action) {
- case SMP_CALL_FUNCTION:
- i = C_SW1;
- break;
+ smp_tc_init(tc, mvpconf0);
+ ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+ }
- case SMP_RESCHEDULE_YOURSELF:
- default:
- i = C_SW0;
- break;
+ /* Release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* We'll wait until starting the secondaries before starting MVPE */
+
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+static void __init vsmp_prepare_cpus(unsigned int max_cpus)
+{
+ mips_mt_set_cpuoptions();
+
+ /* set up ipi interrupts */
+ if (cpu_has_vint) {
+ set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+ set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
- /* 1:1 mapping of vpe and tc... */
- settc(cpu);
- write_vpe_c0_cause(read_vpe_c0_cause() | i);
- evpe(vpflags);
+ cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
- local_irq_restore(flags);
+ setup_irq(cpu_ipi_resched_irq, &irq_resched);
+ setup_irq(cpu_ipi_call_irq, &irq_call);
+
+ set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+ set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
}
+
+struct plat_smp_ops vsmp_smp_ops = {
+ .send_ipi_single = vsmp_send_ipi_single,
+ .send_ipi_mask = vsmp_send_ipi_mask,
+ .init_secondary = vsmp_init_secondary,
+ .smp_finish = vsmp_smp_finish,
+ .cpus_done = vsmp_cpus_done,
+ .boot_secondary = vsmp_boot_secondary,
+ .smp_setup = vsmp_smp_setup,
+ .prepare_cpus = vsmp_prepare_cpus,
+};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 335be9bcf0d..1e5dfc28294 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -37,7 +37,6 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/time.h>
#ifdef CONFIG_MIPS_MT_SMTC
@@ -84,6 +83,16 @@ static inline void set_cpu_sibling_map(int cpu)
cpu_set(cpu, cpu_sibling_map[cpu]);
}
+struct plat_smp_ops *mp_ops;
+
+__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
+{
+ if (ops)
+ printk(KERN_WARNING "Overriding previous set SMP ops\n");
+
+ mp_ops = ops;
+}
+
/*
* First C code run on the secondary CPUs after being started up by
* the master.
@@ -100,7 +109,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_report();
per_cpu_trap_init();
mips_clockevent_init();
- prom_init_secondary();
+ mp_ops->init_secondary();
/*
* XXX parity protection should be folded in here when it's converted
@@ -112,7 +121,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu = smp_processor_id();
cpu_data[cpu].udelay_val = loops_per_jiffy;
- prom_smp_finish();
+ mp_ops->smp_finish();
set_cpu_sibling_map(cpu);
cpu_set(cpu, cpu_callin_map);
@@ -184,7 +193,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
smp_mb();
/* Send a message to all other CPUs and wait for them to respond */
- core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
+ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
/* Wait for response */
/* FIXME: lock-up detection, backtrace on lock-up */
@@ -278,7 +287,7 @@ void smp_send_stop(void)
void __init smp_cpus_done(unsigned int max_cpus)
{
- prom_cpus_done();
+ mp_ops->cpus_done();
}
/* called from main before smp_init() */
@@ -286,7 +295,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
- plat_prepare_cpus(max_cpus);
+ mp_ops->prepare_cpus(max_cpus);
set_cpu_sibling_map(0);
#ifndef CONFIG_HOTPLUG_CPU
cpu_present_map = cpu_possible_map;
@@ -325,7 +334,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
if (IS_ERR(idle))
panic(KERN_ERR "Fork failed for CPU %d", cpu);
- prom_boot_secondary(cpu, idle);
+ mp_ops->boot_secondary(cpu, idle);
/*
* Trust is futile. We should really have timeouts ...
diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c
index 6f370999617..fe256559c99 100644
--- a/arch/mips/kernel/smtc-proc.c
+++ b/arch/mips/kernel/smtc-proc.c
@@ -14,7 +14,6 @@
#include <asm/system.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <linux/proc_fs.h>
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 9c92d42996c..85f700e5813 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -16,7 +16,6 @@
#include <asm/hazards.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <asm/time.h>
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 30f1f54cb68..1695dca5506 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -250,6 +250,8 @@ void __init mips_ejtag_setup(void)
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
+extern struct plat_smp_ops msmtc_smp_ops;
+
void __init prom_init(void)
{
prom_argc = fw_arg0;
@@ -416,4 +418,10 @@ void __init prom_init(void)
#ifdef CONFIG_SERIAL_8250_CONSOLE
console_config();
#endif
+#ifdef CONFIG_MIPS_MT_SMP
+ register_smp_ops(&vsmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ register_smp_ops(&msmtc_smp_ops);
+#endif
}
diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c
index 5c980f4a48f..6f051ca243f 100644
--- a/arch/mips/mips-boards/malta/malta_smtc.c
+++ b/arch/mips/mips-boards/malta/malta_smtc.c
@@ -15,26 +15,24 @@
* Cause the specified action to be performed on a targeted "CPU"
*/
-void core_send_ipi(int cpu, unsigned int action)
+static void msmtc_send_ipi_single(int cpu, unsigned int action)
{
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
}
-/*
- * Platform "CPU" startup hook
- */
-
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
{
- smtc_boot_secondary(cpu, idle);
+ unsigned int i;
+
+ for_each_cpu_mask(i, mask)
+ msmtc_send_ipi_single(i, action);
}
/*
* Post-config but pre-boot cleanup entry point
*/
-
-void __cpuinit prom_init_secondary(void)
+static void __cpuinit msmtc_init_secondary(void)
{
void smtc_init_secondary(void);
int myvpe;
@@ -50,45 +48,61 @@ void __cpuinit prom_init_secondary(void)
set_c0_status(0x100 << cp0_perfcount_irq);
}
- smtc_init_secondary();
+ smtc_init_secondary();
}
/*
- * Platform SMP pre-initialization
- *
- * As noted above, we can assume a single CPU for now
- * but it may be multithreaded.
+ * Platform "CPU" startup hook
*/
-
-void __cpuinit plat_smp_setup(void)
+static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle)
{
- if (read_c0_config3() & (1<<2))
- mipsmt_build_cpu_map(0);
+ smtc_boot_secondary(cpu, idle);
}
-void __init plat_prepare_cpus(unsigned int max_cpus)
+/*
+ * SMP initialization finalization entry point
+ */
+static void __cpuinit msmtc_smp_finish(void)
{
- if (read_c0_config3() & (1<<2))
- mipsmt_prepare_cpus();
+ smtc_smp_finish();
}
/*
- * SMP initialization finalization entry point
+ * Hook for after all CPUs are online
*/
-void __cpuinit prom_smp_finish(void)
+static void msmtc_cpus_done(void)
{
- smtc_smp_finish();
}
/*
- * Hook for after all CPUs are online
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
*/
-void prom_cpus_done(void)
+static void __init msmtc_smp_setup(void)
{
+ mipsmt_build_cpu_map(0);
}
+static void __init msmtc_prepare_cpus(unsigned int max_cpus)
+{
+ mipsmt_prepare_cpus();
+}
+
+struct plat_smp_ops msmtc_smp_ops = {
+ .send_ipi_single = msmtc_send_ipi_single,
+ .send_ipi_mask = msmtc_send_ipi_mask,
+ .init_secondary = msmtc_init_secondary,
+ .smp_finish = msmtc_smp_finish,
+ .cpus_done = msmtc_cpus_done,
+ .boot_secondary = msmtc_boot_secondary,
+ .smp_setup = msmtc_smp_setup,
+ .prepare_cpus = msmtc_prepare_cpus,
+};
+
#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
/*
* IRQ affinity hook
diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile
index 75568b584df..57f43c1c788 100644
--- a/arch/mips/mipssim/Makefile
+++ b/arch/mips/mipssim/Makefile
@@ -21,6 +21,6 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
sim_cmdline.o
obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
-obj-$(CONFIG_SMP) += sim_smp.o
+obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 452c129d02c..d49fe73426b 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -60,6 +60,8 @@ void __init plat_mem_setup(void)
#endif
}
+extern struct plat_smp_ops ssmtc_smp_ops;
+
void __init prom_init(void)
{
set_io_port_base(0xbfd00000);
@@ -67,8 +69,20 @@ void __init prom_init(void)
pr_info("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
-}
+#ifdef CONFIG_MIPS_MT_SMP
+ if (cpu_has_mipsmt)
+ register_smp_ops(&vsmp_smp_ops);
+ else
+ register_smp_ops(&up_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (cpu_has_mipsmt)
+ register_smp_ops(&ssmtc_smp_ops);
+ else
+ register_smp_ops(&up_smp_ops);
+#endif
+}
static void __init serial_init(void)
{
diff --git a/arch/mips/mipssim/sim_smp.c b/arch/mips/mipssim/sim_smtc.c
index ccbbccac23e..d6e4f656ad1 100644
--- a/arch/mips/mipssim/sim_smp.c
+++ b/arch/mips/mipssim/sim_smtc.c
@@ -16,7 +16,7 @@
*
*/
/*
- * Simulator Platform-specific hooks for SMP operation
+ * Simulator Platform-specific hooks for SMTC operation
*/
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -29,65 +29,72 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
-#ifdef CONFIG_MIPS_MT_SMTC
#include <asm/smtc_ipi.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
/* VPE/SMP Prototype implements platform interfaces directly */
-#if !defined(CONFIG_MIPS_MT_SMP)
/*
* Cause the specified action to be performed on a targeted "CPU"
*/
-void core_send_ipi(int cpu, unsigned int action)
+static void ssmtc_send_ipi_single(int cpu, unsigned int action)
{
-#ifdef CONFIG_MIPS_MT_SMTC
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-#endif /* CONFIG_MIPS_MT_SMTC */
-/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+ /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+}
+
+static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
+ for_each_cpu_mask(i, mask)
+ ssmtc_send_ipi_single(i, action);
}
/*
- * Platform "CPU" startup hook
+ * Post-config but pre-boot cleanup entry point
*/
-
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit ssmtc_init_secondary(void)
{
-#ifdef CONFIG_MIPS_MT_SMTC
- smtc_boot_secondary(cpu, idle);
-#endif /* CONFIG_MIPS_MT_SMTC */
+ void smtc_init_secondary(void);
+
+ smtc_init_secondary();
}
/*
- * Post-config but pre-boot cleanup entry point
+ * SMP initialization finalization entry point
*/
+static void __cpuinit ssmtc_smp_finish(void)
+{
+ smtc_smp_finish();
+}
-void __cpuinit prom_init_secondary(void)
+/*
+ * Hook for after all CPUs are online
+ */
+static void ssmtc_cpus_done(void)
{
-#ifdef CONFIG_MIPS_MT_SMTC
- void smtc_init_secondary(void);
+}
- smtc_init_secondary();
-#endif /* CONFIG_MIPS_MT_SMTC */
+/*
+ * Platform "CPU" startup hook
+ */
+static void __cpuinit ssmtc_boot_secondary(int cpu, struct task_struct *idle)
+{
+ smtc_boot_secondary(cpu, idle);
}
-void plat_smp_setup(void)
+static void __init ssmtc_smp_setup(void)
{
-#ifdef CONFIG_MIPS_MT_SMTC
if (read_c0_config3() & (1 << 2))
mipsmt_build_cpu_map(0);
-#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
* Platform SMP pre-initialization
*/
-
-void plat_prepare_cpus(unsigned int max_cpus)
+static void ssmtc_prepare_cpus(unsigned int max_cpus)
{
-#ifdef CONFIG_MIPS_MT_SMTC
/*
* As noted above, we can assume a single CPU for now
* but it may be multithreaded.
@@ -96,28 +103,15 @@ void plat_prepare_cpus(unsigned int max_cpus)
if (read_c0_config3() & (1 << 2)) {
mipsmt_prepare_cpus();
}
-#endif /* CONFIG_MIPS_MT_SMTC */
}
-/*
- * SMP initialization finalization entry point
- */
-
-void __cpuinit prom_smp_finish(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
- smtc_smp_finish();
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-
-/*
- * Hook for after all CPUs are online
- */
-
-void prom_cpus_done(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-#endif /* CONFIG_MIPS32R2_MT_SMP */
+struct plat_smp_ops ssmtc_smp_ops = {
+ .send_ipi_single = ssmtc_send_ipi_single,
+ .send_ipi_mask = ssmtc_send_ipi_mask,
+ .init_secondary = ssmtc_init_secondary,
+ .smp_finish = ssmtc_smp_finish,
+ .cpus_done = ssmtc_cpus_done,
+ .boot_secondary = ssmtc_boot_secondary,
+ .smp_setup = ssmtc_smp_setup,
+ .prepare_cpus = ssmtc_prepare_cpus,
+};
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 96d3ff051d3..35dc435846a 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -19,6 +19,7 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/reboot.h>
+#include <asm/smp-ops.h>
#include <asm/system.h>
#include <asm/bootinfo.h>
#include <asm/pmon.h>
@@ -78,6 +79,8 @@ static void prom_halt(void)
__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
}
+extern struct plat_smp_ops yos_smp_ops;
+
/*
* Init routine which accepts the variables from PMON
*/
@@ -127,6 +130,8 @@ void __init prom_init(void)
}
prom_grab_secondary();
+
+ register_smp_ops(&yos_smp_ops);
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index b0f12cd2968..653f3ec61ca 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -42,70 +42,6 @@ void __init prom_grab_secondary(void)
launchstack + LAUNCHSTACK_SIZE, 0);
}
-/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
- *
- * We don't want to start the secondary CPU yet nor do we have a nice probing
- * feature in PMON so we just assume presence of the secondary core.
- */
-void __init plat_smp_setup(void)
-{
- int i;
-
- cpus_clear(phys_cpu_present_map);
-
- for (i = 0; i < 2; i++) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = i;
- __cpu_logical_map[i] = i;
- }
-}
-
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
- /*
- * Be paranoid. Enable the IPI only if we're really about to go SMP.
- */
- if (cpus_weight(cpu_possible_map))
- set_c0_status(STATUSF_IP5);
-}
-
-/*
- * Firmware CPU startup hook
- * Complicated by PMON's weird interface which tries to minimic the UNIX fork.
- * It launches the next * available CPU and copies some information on the
- * stack so the first thing we do is throw away that stuff and load useful
- * values into the registers ...
- */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
-{
- unsigned long gp = (unsigned long) task_thread_info(idle);
- unsigned long sp = __KSTK_TOS(idle);
-
- secondary_sp = sp;
- secondary_gp = gp;
-
- spin_unlock(&launch_lock);
-}
-
-/* Hook for after all CPUs are online */
-void prom_cpus_done(void)
-{
-}
-
-/*
- * After we've done initial boot, this function is called to allow the
- * board code to clean up state, if needed
- */
-void __cpuinit prom_init_secondary(void)
-{
- set_c0_status(ST0_CO | ST0_IE | ST0_IM);
-}
-
-void __cpuinit prom_smp_finish(void)
-{
-}
-
void titan_mailbox_irq(void)
{
int cpu = smp_processor_id();
@@ -133,7 +69,7 @@ void titan_mailbox_irq(void)
/*
* Send inter-processor interrupt
*/
-void core_send_ipi(int cpu, unsigned int action)
+static void yos_send_ipi_single(int cpu, unsigned int action)
{
/*
* Generate an INTMSG so that it can be sent over to the
@@ -159,3 +95,86 @@ void core_send_ipi(int cpu, unsigned int action)
break;
}
}
+
+static void yos_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu_mask(i, mask)
+ yos_send_ipi_single(i, action);
+}
+
+/*
+ * After we've done initial boot, this function is called to allow the
+ * board code to clean up state, if needed
+ */
+static void __cpuinit yos_init_secondary(void)
+{
+ set_c0_status(ST0_CO | ST0_IE | ST0_IM);
+}
+
+static void __cpuinit yos_smp_finish(void)
+{
+}
+
+/* Hook for after all CPUs are online */
+static void yos_cpus_done(void)
+{
+}
+
+/*
+ * Firmware CPU startup hook
+ * Complicated by PMON's weird interface which tries to minimic the UNIX fork.
+ * It launches the next * available CPU and copies some information on the
+ * stack so the first thing we do is throw away that stuff and load useful
+ * values into the registers ...
+ */
+static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle)
+{
+ unsigned long gp = (unsigned long) task_thread_info(idle);
+ unsigned long sp = __KSTK_TOS(idle);
+
+ secondary_sp = sp;
+ secondary_gp = gp;
+
+ spin_unlock(&launch_lock);
+}
+
+/*
+ * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ *
+ * We don't want to start the secondary CPU yet nor do we have a nice probing
+ * feature in PMON so we just assume presence of the secondary core.
+ */
+static void __init yos_smp_setup(void)
+{
+ int i;
+
+ cpus_clear(phys_cpu_present_map);
+
+ for (i = 0; i < 2; i++) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = i;
+ __cpu_logical_map[i] = i;
+ }
+}
+
+static void __init yos_prepare_cpus(unsigned int max_cpus)
+{
+ /*
+ * Be paranoid. Enable the IPI only if we're really about to go SMP.
+ */
+ if (cpus_weight(cpu_possible_map))
+ set_c0_status(STATUSF_IP5);
+}
+
+struct plat_smp_ops yos_smp_ops = {
+ .send_ipi_single = yos_send_ipi_single,
+ .send_ipi_mask = yos_send_ipi_mask,
+ .init_secondary = yos_init_secondary,
+ .smp_finish = yos_smp_finish,
+ .cpus_done = yos_cpus_done,
+ .boot_secondary = yos_boot_secondary,
+ .smp_setup = yos_smp_setup,
+ .prepare_cpus = yos_prepare_cpus,
+};
diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c
index 4b0178d0df0..ead6c30eeb1 100644
--- a/arch/mips/qemu/q-smp.c
+++ b/arch/mips/qemu/q-smp.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
*
* Symmetric Uniprocessor (TM) Support
*/
@@ -13,43 +13,55 @@
/*
* Send inter-processor interrupt
*/
-void core_send_ipi(int cpu, unsigned int action)
+void up_send_ipi_single(int cpu, unsigned int action)
{
- panic(KERN_ERR "%s called", __FUNCTION__);
+ panic(KERN_ERR "%s called", __func__);
+}
+
+static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ panic(KERN_ERR "%s called", __func__);
}
/*
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
-void __cpuinit prom_init_secondary(void)
+void __cpuinit up_init_secondary(void)
{
}
-void __cpuinit prom_smp_finish(void)
+void __cpuinit up_smp_finish(void)
{
}
/* Hook for after all CPUs are online */
-void prom_cpus_done(void)
-{
-}
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void up_cpus_done(void)
{
- cpus_clear(phys_cpu_present_map);
}
/*
* Firmware CPU startup hook
*/
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle)
{
}
-void __init plat_smp_setup(void)
+void __init up_smp_setup(void)
{
}
-void __init plat_prepare_cpus(unsigned int max_cpus)
+
+void __init up_prepare_cpus(unsigned int max_cpus)
{
}
+
+struct plat_smp_ops up_smp_ops = {
+ .send_ipi_single = up_send_ipi_single,
+ .send_ipi_mask = up_send_ipi_mask,
+ .init_secondary = up_init_secondary,
+ .smp_finish = up_smp_finish,
+ .cpus_done = up_cpus_done,
+ .boot_secondary = up_boot_secondary,
+ .smp_setup = up_smp_setup,
+ .prepare_cpus = up_prepare_cpus,
+};
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 3305fa9ae66..a49e7c85f72 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -27,7 +27,6 @@
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
#include <asm/current.h>
-#include <asm/smp.h>
#include <asm/processor.h>
#include <asm/mmu_context.h>
#include <asm/thread_info.h>
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index f10d9839006..48932ce1d73 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -11,7 +11,6 @@
#include <asm/page.h>
#include <asm/sections.h>
-#include <asm/smp.h>
#include <asm/sn/types.h>
#include <asm/sn/arch.h>
#include <asm/sn/gda.h>
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index a70656d4219..f15fc93d6b3 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -140,30 +140,51 @@ static __init void intr_clear_all(nasid_t nasid)
REMOTE_HUB_CLR_INTR(nasid, i);
}
-void __init plat_smp_setup(void)
+static void ip27_send_ipi_single(int destid, unsigned int action)
{
- cnodeid_t cnode;
+ int irq;
- for_each_online_node(cnode) {
- if (cnode == 0)
- continue;
- intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+ switch (action) {
+ case SMP_RESCHEDULE_YOURSELF:
+ irq = CPU_RESCHED_A_IRQ;
+ break;
+ case SMP_CALL_FUNCTION:
+ irq = CPU_CALL_A_IRQ;
+ break;
+ default:
+ panic("sendintr");
}
- replicate_kernel_text();
+ irq += cputoslice(destid);
/*
- * Assumption to be fixed: we're always booted on logical / physical
- * processor 0. While we're always running on logical processor 0
- * this still means this is physical processor zero; it might for
- * example be disabled in the firwware.
+ * Convert the compact hub number to the NASID to get the correct
+ * part of the address space. Then set the interrupt bit associated
+ * with the CPU we want to send the interrupt to.
*/
- alloc_cpupda(0, 0);
+ REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
}
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu_mask(i, mask)
+ ip27_send_ipi_single(i, action);
+}
+
+static void __cpuinit ip27_init_secondary(void)
+{
+ per_cpu_init();
+ local_irq_enable();
+}
+
+static void __cpuinit ip27_smp_finish(void)
+{
+}
+
+static void __init ip27_cpus_done(void)
{
- /* We already did everything necessary earlier */
}
/*
@@ -171,7 +192,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* set sp to the kernel stack of the newly created idle process, gp to the proc
* struct so that current_thread_info() will work.
*/
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit ip27_boot_secondary(int cpu, struct task_struct *idle)
{
unsigned long gp = (unsigned long)task_thread_info(idle);
unsigned long sp = __KSTK_TOS(idle);
@@ -181,41 +202,39 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
0, (void *) sp, (void *) gp);
}
-void __cpuinit prom_init_secondary(void)
+static void __init ip27_smp_setup(void)
{
- per_cpu_init();
- local_irq_enable();
-}
-
-void __init prom_cpus_done(void)
-{
-}
-
-void __cpuinit prom_smp_finish(void)
-{
-}
-
-void core_send_ipi(int destid, unsigned int action)
-{
- int irq;
+ cnodeid_t cnode;
- switch (action) {
- case SMP_RESCHEDULE_YOURSELF:
- irq = CPU_RESCHED_A_IRQ;
- break;
- case SMP_CALL_FUNCTION:
- irq = CPU_CALL_A_IRQ;
- break;
- default:
- panic("sendintr");
+ for_each_online_node(cnode) {
+ if (cnode == 0)
+ continue;
+ intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
}
- irq += cputoslice(destid);
+ replicate_kernel_text();
/*
- * Convert the compact hub number to the NASID to get the correct
- * part of the address space. Then set the interrupt bit associated
- * with the CPU we want to send the interrupt to.
+ * Assumption to be fixed: we're always booted on logical / physical
+ * processor 0. While we're always running on logical processor 0
+ * this still means this is physical processor zero; it might for
+ * example be disabled in the firwware.
*/
- REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
+ alloc_cpupda(0, 0);
}
+
+static void __init ip27_prepare_cpus(unsigned int max_cpus)
+{
+ /* We already did everything necessary earlier */
+}
+
+struct plat_smp_ops ip27_smp_ops = {
+ .send_ipi_single = ip27_send_ipi_single,
+ .send_ipi_mask = ip27_send_ipi_mask,
+ .init_secondary = ip27_init_secondary,
+ .smp_finish = ip27_smp_finish,
+ .cpus_done = ip27_cpus_done,
+ .boot_secondary = ip27_boot_secondary,
+ .smp_setup = ip27_smp_setup,
+ .prepare_cpus = ip27_prepare_cpus,
+};
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 436ba78359a..183c460b9ca 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -23,6 +23,7 @@
#include <asm/mmu_context.h>
#include <asm/io.h>
+#include <asm/fw/cfe/cfe_api.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
@@ -67,28 +68,114 @@ void __cpuinit bcm1480_smp_init(void)
change_c0_status(ST0_IM, imask);
}
-void __cpuinit bcm1480_smp_finish(void)
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+static void bcm1480_send_ipi_single(int cpu, unsigned int action)
+{
+ __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu_mask(i, mask)
+ bcm1480_send_ipi_single(i, action);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit bcm1480_init_secondary(void)
+{
+ extern void bcm1480_smp_init(void);
+
+ bcm1480_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+static void __cpuinit bcm1480_smp_finish(void)
{
extern void sb1480_clockevent_init(void);
sb1480_clockevent_init();
local_irq_enable();
+ bcm1480_smp_finish();
}
/*
- * These are routines for dealing with the sb1250 smp capabilities
- * independent of board/firmware
+ * Final cleanup after all secondaries booted
*/
+static void bcm1480_cpus_done(void)
+{
+}
/*
- * Simple enough; everything is set up, so just poke the appropriate mailbox
- * register, and we should be set
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
*/
-void core_send_ipi(int cpu, unsigned int action)
+static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle)
{
- __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+ int retval;
+
+ retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+ __KSTK_TOS(idle),
+ (unsigned long)task_thread_info(idle), 0);
+ if (retval != 0)
+ printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
}
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+static void __init bcm1480_smp_setup(void)
+{
+ int i, num;
+
+ cpus_clear(phys_cpu_present_map);
+ cpu_set(0, phys_cpu_present_map);
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
+ if (cfe_cpu_stop(i) == 0) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+ }
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops bcm1480_smp_ops = {
+ .send_ipi_single = bcm1480_send_ipi_single,
+ .send_ipi_mask = bcm1480_send_ipi_mask,
+ .init_secondary = bcm1480_init_secondary,
+ .smp_finish = bcm1480_smp_finish,
+ .cpus_done = bcm1480_cpus_done,
+ .boot_secondary = bcm1480_boot_secondary,
+ .smp_setup = bcm1480_smp_setup,
+ .prepare_cpus = bcm1480_prepare_cpus,
+};
+
void bcm1480_mailbox_interrupt(void)
{
int cpu = smp_processor_id();
diff --git a/arch/mips/sibyte/cfe/Makefile b/arch/mips/sibyte/cfe/Makefile
index a1214937b70..02b32e142ad 100644
--- a/arch/mips/sibyte/cfe/Makefile
+++ b/arch/mips/sibyte/cfe/Makefile
@@ -1,3 +1,2 @@
lib-y = setup.o
-lib-$(CONFIG_SMP) += smp.o
lib-$(CONFIG_SIBYTE_CFE_CONSOLE) += console.o
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index dbd6e6fdd3f..50d7c05e15b 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -28,6 +28,7 @@
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/sibyte/board.h>
+#include <asm/smp-ops.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/fw/cfe/cfe_error.h>
@@ -232,6 +233,9 @@ static int __init initrd_setup(char *str)
#endif
+extern struct plat_smp_ops sb_smp_ops;
+extern struct plat_smp_ops bcm1480_smp_ops;
+
/*
* prom_init is called just after the cpu type is determined, from setup_arch()
*/
@@ -340,6 +344,13 @@ void __init prom_init(void)
arcs_cmdline[CL_SIZE-1] = 0;
prom_meminit();
+
+#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
+ register_smp_ops(&sb_smp_ops);
+#endif
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ register_smp_ops(&bcm1480_smp_ops);
+#endif
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
deleted file mode 100644
index 534a62912f2..00000000000
--- a/arch/mips/sibyte/cfe/smp.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <asm/processor.h>
-
-#include <asm/fw/cfe/cfe_api.h>
-#include <asm/fw/cfe/cfe_error.h>
-
-/*
- * Use CFE to find out how many CPUs are available, setting up
- * phys_cpu_present_map and the logical/physical mappings.
- * XXXKW will the boot CPU ever not be physical 0?
- *
- * Common setup before any secondaries are started
- */
-void __init plat_smp_setup(void)
-{
- int i, num;
-
- cpus_clear(phys_cpu_present_map);
- cpu_set(0, phys_cpu_present_map);
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
-
- for (i = 1, num = 0; i < NR_CPUS; i++) {
- if (cfe_cpu_stop(i) == 0) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
- }
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
-}
-
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it
- * running!
- */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
-{
- int retval;
-
- retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
- __KSTK_TOS(idle),
- (unsigned long)task_thread_info(idle), 0);
- if (retval != 0)
- printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
-}
-
-/*
- * Code to run on secondary just after probing the CPU
- */
-void __cpuinit prom_init_secondary(void)
-{
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
- extern void bcm1480_smp_init(void);
- bcm1480_smp_init();
-#elif defined(CONFIG_SIBYTE_SB1250)
- extern void sb1250_smp_init(void);
- sb1250_smp_init();
-#else
-#error invalid SMP configuration
-#endif
-}
-
-/*
- * Do any tidying up before marking online and running the idle
- * loop
- */
-void __cpuinit prom_smp_finish(void)
-{
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
- extern void bcm1480_smp_finish(void);
- bcm1480_smp_finish();
-#elif defined(CONFIG_SIBYTE_SB1250)
- extern void sb1250_smp_finish(void);
- sb1250_smp_finish();
-#else
-#error invalid SMP configuration
-#endif
-}
-
-/*
- * Final cleanup after all secondaries booted
- */
-void prom_cpus_done(void)
-{
-}
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index 3f52c95a4eb..0734b933e96 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -24,6 +24,7 @@
#include <asm/mmu_context.h>
#include <asm/io.h>
+#include <asm/fw/cfe/cfe_api.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
@@ -55,7 +56,43 @@ void __cpuinit sb1250_smp_init(void)
change_c0_status(ST0_IM, imask);
}
-void __cpuinit sb1250_smp_finish(void)
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+static void sb1250_send_ipi_single(int cpu, unsigned int action)
+{
+ __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+}
+
+static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu_mask(i, mask)
+ sb1250_send_ipi_single(i, action);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit sb1250_init_secondary(void)
+{
+ extern void sb1250_smp_init(void);
+
+ sb1250_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+static void __cpuinit sb1250_smp_finish(void)
{
extern void sb1250_clockevent_init(void);
@@ -64,19 +101,68 @@ void __cpuinit sb1250_smp_finish(void)
}
/*
- * These are routines for dealing with the sb1250 smp capabilities
- * independent of board/firmware
+ * Final cleanup after all secondaries booted
*/
+static void sb1250_cpus_done(void)
+{
+}
/*
- * Simple enough; everything is set up, so just poke the appropriate mailbox
- * register, and we should be set
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
*/
-void core_send_ipi(int cpu, unsigned int action)
+static void __cpuinit sb1250_boot_secondary(int cpu, struct task_struct *idle)
{
- __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+ int retval;
+
+ retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+ __KSTK_TOS(idle),
+ (unsigned long)task_thread_info(idle), 0);
+ if (retval != 0)
+ printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
}
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+static void __init sb1250_smp_setup(void)
+{
+ int i, num;
+
+ cpus_clear(phys_cpu_present_map);
+ cpu_set(0, phys_cpu_present_map);
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
+ if (cfe_cpu_stop(i) == 0) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+ }
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init sb1250_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops sb_smp_ops = {
+ .send_ipi_single = sb1250_send_ipi_single,
+ .send_ipi_mask = sb1250_send_ipi_mask,
+ .init_secondary = sb1250_init_secondary,
+ .smp_finish = sb1250_smp_finish,
+ .cpus_done = sb1250_cpus_done,
+ .boot_secondary = sb1250_boot_secondary,
+ .smp_setup = sb1250_smp_setup,
+ .prepare_cpus = sb1250_prepare_cpus,
+};
+
void sb1250_mailbox_interrupt(void)
{
int cpu = smp_processor_id();
diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h
index 0dad844a3b5..80c1a052662 100644
--- a/include/asm-mips/sibyte/sb1250.h
+++ b/include/asm-mips/sibyte/sb1250.h
@@ -48,12 +48,10 @@ extern unsigned int zbbus_mhz;
extern void sb1250_time_init(void);
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
-extern void sb1250_smp_finish(void);
extern void bcm1480_time_init(void);
extern void bcm1480_mask_irq(int cpu, int irq);
extern void bcm1480_unmask_irq(int cpu, int irq);
-extern void bcm1480_smp_finish(void);
#define AT_spin \
__asm__ __volatile__ ( \
diff --git a/include/asm-mips/smp-ops.h b/include/asm-mips/smp-ops.h
new file mode 100644
index 00000000000..b17fdfb5d81
--- /dev/null
+++ b/include/asm-mips/smp-ops.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_OPS_H
+#define __ASM_SMP_OPS_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct plat_smp_ops {
+ void (*send_ipi_single)(int cpu, unsigned int action);
+ void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+ void (*init_secondary)(void);
+ void (*smp_finish)(void);
+ void (*cpus_done)(void);
+ void (*boot_secondary)(int cpu, struct task_struct *idle);
+ void (*smp_setup)(void);
+ void (*prepare_cpus)(unsigned int max_cpus);
+};
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+static inline void plat_smp_setup(void)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->smp_setup();
+}
+
+#else /* !CONFIG_SMP */
+
+struct plat_smp_ops;
+
+static inline void plat_smp_setup(void)
+{
+ /* UP, nothing to do ... */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+#endif /* !CONFIG_SMP */
+
+extern struct plat_smp_ops up_smp_ops;
+extern struct plat_smp_ops vsmp_smp_ops;
+
+#endif /* __ASM_SMP_OPS_H */
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 23265879cee..84fef1aeec0 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -11,14 +11,13 @@
#ifndef __ASM_SMP_H
#define __ASM_SMP_H
-
-#ifdef CONFIG_SMP
-
#include <linux/bitops.h>
#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
+
#include <asm/atomic.h>
+#include <asm/smp-ops.h>
extern int smp_num_siblings;
extern cpumask_t cpu_sibling_map[];
@@ -52,56 +51,6 @@ extern struct call_data_struct *call_data;
extern cpumask_t phys_cpu_present_map;
#define cpu_possible_map phys_cpu_present_map
-/*
- * These are defined by the board-specific code.
- */
-
-/*
- * Cause the function described by call_data to be executed on the passed
- * cpu. When the function has finished, increment the finished field of
- * call_data.
- */
-extern void core_send_ipi(int cpu, unsigned int action);
-
-static inline void core_send_ipi_mask(cpumask_t mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu_mask(i, mask)
- core_send_ipi(i, action);
-}
-
-
-/*
- * Firmware CPU startup hook
- */
-extern void prom_boot_secondary(int cpu, struct task_struct *idle);
-
-/*
- * After we've done initial boot, this function is called to allow the
- * board code to clean up state, if needed
- */
-extern void prom_init_secondary(void);
-
-/*
- * Populate cpu_possible_map before smp_init, called from setup_arch.
- */
-extern void plat_smp_setup(void);
-
-/*
- * Called in smp_prepare_cpus.
- */
-extern void plat_prepare_cpus(unsigned int max_cpus);
-
-/*
- * Last chance for the board code to finish SMP initialization before
- * the CPU is "online".
- */
-extern void prom_smp_finish(void);
-
-/* Hook for after all CPUs are online */
-extern void prom_cpus_done(void);
-
extern void asmlinkage smp_bootstrap(void);
/*
@@ -111,11 +60,11 @@ extern void asmlinkage smp_bootstrap(void);
*/
static inline void smp_send_reschedule(int cpu)
{
- core_send_ipi(cpu, SMP_RESCHEDULE_YOURSELF);
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
}
extern asmlinkage void smp_call_function_interrupt(void);
-#endif /* CONFIG_SMP */
-
#endif /* __ASM_SMP_H */