diff options
| -rw-r--r-- | drivers/usb/serial/mos7840.c | 400 |
1 files changed, 164 insertions, 236 deletions
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2b1fded6619..09d82062b97 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -33,7 +33,7 @@ #include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> /* * Version Information @@ -82,8 +82,8 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ +#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ +#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -102,8 +102,8 @@ #define MAX_NAME_LEN 64 -#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58 -#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62 +#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ +#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ /* For higher baud Rates use TIOCEXBAUD */ #define TIOCEXBAUD 0x5462 @@ -142,7 +142,7 @@ #define MOS_MSR_DELTA_RI 0x40 #define MOS_MSR_DELTA_CD 0x80 -// Serial Port register Address +/* Serial Port register Address */ #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) #define FIFO_CONTROL_REGISTER ((__u16)(0x02)) #define LINE_CONTROL_REGISTER ((__u16)(0x03)) @@ -201,11 +201,11 @@ struct moschip_port { struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ - /*Offsets */ + /* Offsets */ __u8 SpRegOffset; __u8 ControlRegOffset; __u8 DcrRegOffset; - //for processing control URBS in interrupt context + /* for processing control URBS in interrupt context */ struct urb *control_urb; struct usb_ctrlrequest *dr; char *ctrl_buf; @@ -244,7 +244,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, */ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = port->serial->dev; int ret = 0; @@ -269,16 +269,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, struct usb_device *dev = port->serial->dev; val = val & 0x00ff; - // For the UART control registers, the application number need to be Or'ed + /* For the UART control registers, the application number need + to be Or'ed */ if (port->serial->num_ports == 4) { - val |= - (((__u16) port->number - (__u16) (port->serial->minor)) + - 1) << 8; + val |= (((__u16) port->number - + (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_set_uart_reg application number is %x\n", val); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - val |= - (((__u16) port->number - + val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_set_uart_reg application number is %x\n", val); @@ -302,14 +301,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, * by passing usb_rcvctrlpipe function as parameter. */ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = port->serial->dev; int ret = 0; __u16 Wval; - //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); - /*Wval is same as application number */ + /* dbg("application number is %4x \n", + (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ + /* Wval is same as application number */ if (port->serial->num_ports == 4) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + @@ -317,14 +317,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, dbg("mos7840_get_uart_reg application number is %x\n", Wval); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - Wval = - (((__u16) port->number - + Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_get_uart_reg application number is %x\n", Wval); } else { - Wval = - (((__u16) port->number - + Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; dbg("mos7840_get_uart_reg application number is %x\n", Wval); @@ -406,11 +404,11 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) dbg("%s - %02x", __func__, new_lsr); if (new_lsr & SERIAL_LSR_BI) { - // - // Parity and Framing errors only count if they - // occur exclusive of a break being - // received. - // + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); } @@ -492,7 +490,7 @@ exit: } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = mcs->port->serial->dev; struct usb_ctrlrequest *dr = mcs->dr; @@ -501,7 +499,7 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, dr->bRequestType = MCS_RD_RTYPE; dr->bRequest = MCS_RDREQ; - dr->wValue = cpu_to_le16(Wval); //0; + dr->wValue = cpu_to_le16(Wval); /* 0 */ dr->wIndex = cpu_to_le16(reg); dr->wLength = cpu_to_le16(2); @@ -607,7 +605,8 @@ static void mos7840_interrupt_callback(struct urb *urb) } } } - if (!(rv < 0)) /* the completion handler for the control urb will resubmit */ + if (!(rv < 0)) + /* the completion handler for the control urb will resubmit */ return; exit: result = usb_submit_urb(urb, GFP_ATOMIC); @@ -656,8 +655,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, if (!port || mos7840_port_paranoia_check(port, function) || mos7840_serial_paranoia_check(port->serial, function)) { - /* then say that we don't have a valid usb_serial thing, which will - * end up genrating -ENODEV return values */ + /* then say that we don't have a valid usb_serial thing, + * which will end up genrating -ENODEV return values */ return NULL; } @@ -741,8 +740,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) /***************************************************************************** * mos7840_bulk_out_data_callback - * this is the callback function for when we have finished sending serial data - * on the bulk out endpoint. + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. *****************************************************************************/ static void mos7840_bulk_out_data_callback(struct urb *urb) @@ -848,7 +847,8 @@ static int mos7840_open(struct tty_struct *tty, continue; } - urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); if (!urb->transfer_buffer) { usb_free_urb(urb); mos7840_port->write_urb_pool[j] = NULL; @@ -869,9 +869,8 @@ static int mos7840_open(struct tty_struct *tty, * 0x08 : SP1/2 Control Reg *****************************************************************************/ -//NEED to check the following Block + /* NEED to check the following Block */ - status = 0; Data = 0x0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { @@ -891,36 +890,35 @@ static int mos7840_open(struct tty_struct *tty, dbg("writing Spreg failed\n"); return -1; } -//End of block to be checked + /* End of block to be checked */ - status = 0; Data = 0x0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); if (status < 0) { dbg("Reading Controlreg failed\n"); return -1; } - Data |= 0x08; //Driver done bit - Data |= 0x20; //rx_disable - status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + Data |= 0x08; /* Driver done bit */ + Data |= 0x20; /* rx_disable */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); if (status < 0) { dbg("writing Controlreg failed\n"); return -1; } - //do register settings here - // Set all regs to the device default values. - //////////////////////////////////// - // First Disable all interrupts. - //////////////////////////////////// - + /* do register settings here */ + /* Set all regs to the device default values. */ + /*********************************** + * First Disable all interrupts. + ***********************************/ Data = 0x00; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dbg("disableing interrupts failed\n"); return -1; } - // Set FIFO_CONTROL_REGISTER to the default value + /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { @@ -947,90 +945,73 @@ static int mos7840_open(struct tty_struct *tty, status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; - Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 + Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); Data = 0x0c; - status = 0; status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = 0x0; - status = 0; status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); Data = Data & ~SERIAL_LCR_DLAB; - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); mos7840_port->shadowLCR = Data; - //clearing Bulkin and Bulkout Fifo + /* clearing Bulkin and Bulkout Fifo */ Data = 0x0; - status = 0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); Data = Data | 0x0c; - status = 0; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); Data = Data & ~0x0c; - status = 0; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); - //Finally enable all interrupts - Data = 0x0; + /* Finally enable all interrupts */ Data = 0x0c; - status = 0; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - //clearing rx_disable + /* clearing rx_disable */ Data = 0x0; - status = 0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); Data = Data & ~0x20; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); - // rx_negate + /* rx_negate */ Data = 0x0; - status = 0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); Data = Data | 0x10; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); /* force low_latency on so that our tty_push actually forces * * the data through,otherwise it is scheduled, and with * * high data rates (like with OHCI) data can get lost. */ - if (tty) tty->low_latency = 1; -/* Check to see if we've set up our endpoint info yet * - * (can't set it up in mos7840_startup as the structures * - * were not set up at that time.) */ + + /* Check to see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the structures * + * were not set up at that time.) */ if (port0->open_ports == 1) { if (serial->port[0]->interrupt_in_buffer == NULL) { - /* set up interrupt urb */ - usb_fill_int_urb(serial->port[0]->interrupt_in_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - serial->port[0]-> - interrupt_in_endpointAddress), - serial->port[0]->interrupt_in_buffer, - serial->port[0]->interrupt_in_urb-> - transfer_buffer_length, - mos7840_interrupt_callback, - serial, - serial->port[0]->interrupt_in_urb-> - interval); + serial->dev, + usb_rcvintpipe(serial->dev, + serial->port[0]->interrupt_in_endpointAddress), + serial->port[0]->interrupt_in_buffer, + serial->port[0]->interrupt_in_urb-> + transfer_buffer_length, + mos7840_interrupt_callback, + serial, + serial->port[0]->interrupt_in_urb->interval); /* start interrupt read for mos7840 * * will continue as long as mos7840 is connected */ @@ -1085,14 +1066,16 @@ static int mos7840_open(struct tty_struct *tty, memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); /* initialize our port settings */ - mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ + /* Must set to enable ints! */ + mos7840_port->shadowMCR = MCR_MASTER_IE; /* send a open port command */ mos7840_port->open = 1; - //mos7840_change_port_settings(mos7840_port,old_termios); + /* mos7840_change_port_settings(mos7840_port,old_termios); */ mos7840_port->icount.tx = 0; mos7840_port->icount.rx = 0; - dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", serial, mos7840_port, port); + dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", + serial, mos7840_port, port); return 0; @@ -1129,11 +1112,11 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) return 0; } - spin_lock_irqsave(&mos7840_port->pool_lock,flags); + spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) if (mos7840_port->busy[i]) chars += URB_TRANSFER_BUFFER_SIZE; - spin_unlock_irqrestore(&mos7840_port->pool_lock,flags); + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); dbg("%s - returns %d", __func__, chars); return chars; @@ -1161,9 +1144,8 @@ static void mos7840_block_until_tx_empty(struct tty_struct *tty, count = mos7840_chars_in_buffer(tty); /* Check for Buffer status */ - if (count <= 0) { + if (count <= 0) return; - } /* Block the thread for a while */ interruptible_sleep_on_timeout(&mos7840_port->wait_chase, @@ -1245,11 +1227,11 @@ static void mos7840_close(struct tty_struct *tty, } if ((&mos7840_port->control_urb)) { dbg("%s", "Shutdown control read\n"); - // usb_kill_urb (mos7840_port->control_urb); + /*/ usb_kill_urb (mos7840_port->control_urb); */ } } -// if(mos7840_port->ctrl_buf != NULL) -// kfree(mos7840_port->ctrl_buf); +/* if(mos7840_port->ctrl_buf != NULL) */ +/* kfree(mos7840_port->ctrl_buf); */ port0->open_ports--; dbg("mos7840_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number); @@ -1262,10 +1244,8 @@ static void mos7840_close(struct tty_struct *tty, if (mos7840_port->write_urb) { /* if this urb had a transfer buffer already (old tx) free it */ - - if (mos7840_port->write_urb->transfer_buffer != NULL) { + if (mos7840_port->write_urb->transfer_buffer != NULL) kfree(mos7840_port->write_urb->transfer_buffer); - } usb_free_urb(mos7840_port->write_urb); } @@ -1302,9 +1282,8 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty, count = mos7840_chars_in_buffer(tty); /* Check for Buffer status */ - if (count <= 0) { + if (count <= 0) return; - } /* Block the thread for a while */ interruptible_sleep_on_timeout(&mos7840_port->wait_chase, @@ -1349,9 +1328,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state) mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { + if (mos7840_port == NULL) return; - } if (serial->dev) /* flush and block until tx is empty */ @@ -1403,9 +1381,8 @@ static int mos7840_write_room(struct tty_struct *tty) spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (!mos7840_port->busy[i]) { + if (!mos7840_port->busy[i]) room += URB_TRANSFER_BUFFER_SIZE; - } } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); @@ -1435,45 +1412,41 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, struct moschip_port *mos7840_port; struct usb_serial *serial; struct urb *urb; - //__u16 Data; + /* __u16 Data; */ const unsigned char *current_position = data; unsigned char *data1; dbg("%s \n", "entering ..........."); - //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR); + /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); */ #ifdef NOTMOS7840 Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data); dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", mos7840_port->shadowLCR); - //Data = 0x03; - //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); - //mos7840_port->shadowLCR=Data;//Need to add later + /* Data = 0x03; */ + /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ + /* mos7840_port->shadowLCR=Data;//Need to add later */ - Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 - status = 0; + Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - //Data = 0x0c; - //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); + /* Data = 0x0c; */ + /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); dbg("mos7840_write:DLL value is %x\n", Data); Data = 0x0; - status = 0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); dbg("mos7840_write:DLM value is %x\n", Data); Data = Data & ~SERIAL_LCR_DLAB; dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", mos7840_port->shadowLCR); - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); #endif @@ -1598,7 +1571,6 @@ static void mos7840_throttle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7840_port->shadowMCR &= ~MCR_RTS; - status = 0; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); if (status < 0) @@ -1610,8 +1582,9 @@ static void mos7840_throttle(struct tty_struct *tty) /***************************************************************************** * mos7840_unthrottle - * this function is called by the tty driver when it wants to resume the data - * being read from the port (called after SerialThrottle is called) + * this function is called by the tty driver when it wants to resume + * the data being read from the port (called after mos7840_throttle is + * called) *****************************************************************************/ static void mos7840_unthrottle(struct tty_struct *tty) { @@ -1645,7 +1618,6 @@ static void mos7840_unthrottle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7840_port->shadowMCR |= MCR_RTS; - status = 0; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); if (status < 0) @@ -1660,7 +1632,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) unsigned int result; __u16 msr; __u16 mcr; - int status = 0; + int status; mos7840_port = mos7840_get_port_private(port); dbg("%s - port %d", __func__, port->number); @@ -1731,7 +1703,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, struct file *file, * baud rate. *****************************************************************************/ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, - __u16 * clk_sel_val) + __u16 *clk_sel_val) { dbg("%s - %d", __func__, baudRate); @@ -1783,9 +1755,8 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, /* Check for round off */ round1 = (__u16) (2304000L / baudrate); round = (__u16) (round1 - (custom * 10)); - if (round > 4) { + if (round > 4) custom++; - } *divisor = custom; dbg(" Baud %d = %d\n", baudrate, custom); @@ -1833,16 +1804,15 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, dbg("%s - port = %d, baud = %d", __func__, mos7840_port->port->number, baudRate); - //reset clk_uart_sel in spregOffset + /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { #ifdef HW_flow_control - //NOTE: need to see the pther register to modify - //setting h/w flow control bit to 1; - status = 0; + /* NOTE: need to see the pther register to modify */ + /* setting h/w flow control bit to 1 */ Data = 0x2b; mos7840_port->shadowMCR = Data; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1851,12 +1821,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, } else { #ifdef HW_flow_control - //setting h/w flow control bit to 0; - status = 0; + / *setting h/w flow control bit to 0 */ Data = 0xb; mos7840_port->shadowMCR = Data; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1865,25 +1834,20 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, } - if (1) //baudRate <= 115200) - { + if (1) { /* baudRate <= 115200) */ clk_sel_val = 0x0; Data = 0x0; - status = 0; - status = - mos7840_calc_baud_rate_divisor(baudRate, &divisor, + status = mos7840_calc_baud_rate_divisor(baudRate, &divisor, &clk_sel_val); - status = - mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, - &Data); + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, + &Data); if (status < 0) { dbg("reading spreg failed in set_serial_baud\n"); return -1; } Data = (Data & 0x8f) | clk_sel_val; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1915,7 +1879,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); } - return status; } @@ -2006,9 +1969,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty, dbg("%s - parity = none", __func__); } - if (cflag & CMSPAR) { + if (cflag & CMSPAR) lParity = lParity | 0x20; - } /* Change the Stop bit */ if (cflag & CSTOPB) { @@ -2050,16 +2012,13 @@ static void mos7840_change_port_settings(struct tty_struct *tty, /* set up the MCR register and send it to the mos7840 */ mos7840_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) { + if (cflag & CBAUD) mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); - } - if (cflag & CRTSCTS) { + if (cflag & CRTSCTS) mos7840_port->shadowMCR |= (MCR_XON_ANY); - - } else { + else mos7840_port->shadowMCR &= ~(MCR_XON_ANY); - } Data = mos7840_port->shadowMCR; mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); @@ -2255,7 +2214,6 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port, mos7840_port->shadowMCR = mcr; Data = mos7840_port->shadowMCR; - status = 0; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { dbg("setting MODEM_CONTROL_REGISTER Failed\n"); @@ -2276,8 +2234,7 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port, unsigned int result = 0; __u16 msr; unsigned int mcr = mos7840_port->shadowMCR; - int status = 0; - status = mos7840_get_uart_reg(mos7840_port->port, + mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER, &msr); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ @@ -2389,7 +2346,7 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file, dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7840_port->icount; while (1) { - //interruptible_sleep_on(&mos7840_port->delta_msr_wait); + /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ mos7840_port->delta_msr_cond = 0; wait_event_interruptible(mos7840_port->delta_msr_wait, (mos7840_port-> @@ -2494,8 +2451,9 @@ static int mos7840_startup(struct usb_serial *serial) goto error; } - /* Initialize all port interrupt end point to port 0 int endpoint * - * Our device has only one interrupt end point comman to all port */ + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt end point + * common to all port */ mos7840_port->port = serial->port[i]; mos7840_set_port_private(serial->port[i], mos7840_port); @@ -2531,27 +2489,23 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->DcrRegOffset = 0x1c; } mos7840_dump_serial_port(mos7840_port); - mos7840_set_port_private(serial->port[i], mos7840_port); - //enable rx_disable bit in control register - - status = - mos7840_get_reg_sync(serial->port[i], - mos7840_port->ControlRegOffset, &Data); + /* enable rx_disable bit in control register */ + status = mos7840_get_reg_sync(serial->port[i], + mos7840_port->ControlRegOffset, &Data); if (status < 0) { dbg("Reading ControlReg failed status-0x%x\n", status); break; } else dbg("ControlReg Reading success val is %x, status%d\n", Data, status); - Data |= 0x08; //setting driver done bit - Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg + Data |= 0x08; /* setting driver done bit */ + Data |= 0x04; /* sp1_bit to have cts change reflect in + modem status reg */ - //Data |= 0x20; //rx_disable bit - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], + /* Data |= 0x20; //rx_disable bit */ + status = mos7840_set_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, Data); if (status < 0) { dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status); @@ -2560,13 +2514,11 @@ static int mos7840_startup(struct usb_serial *serial) dbg("ControlReg Writing success(rx_disable) status%d\n", status); - //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 + /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 + and 0x24 in DCR3 */ Data = 0x01; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 0), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 0), Data); if (status < 0) { dbg("Writing DCR0 failed status-0x%x\n", status); break; @@ -2574,11 +2526,8 @@ static int mos7840_startup(struct usb_serial *serial) dbg("DCR0 Writing success status%d\n", status); Data = 0x05; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 1), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 1), Data); if (status < 0) { dbg("Writing DCR1 failed status-0x%x\n", status); break; @@ -2586,22 +2535,17 @@ static int mos7840_startup(struct usb_serial *serial) dbg("DCR1 Writing success status%d\n", status); Data = 0x24; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 2), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 2), Data); if (status < 0) { dbg("Writing DCR2 failed status-0x%x\n", status); break; } else dbg("DCR2 Writing success status%d\n", status); - // write values in clkstart0x0 and clkmulti 0x20 + /* write values in clkstart0x0 and clkmulti 0x20 */ Data = 0x0; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, Data); if (status < 0) { dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); @@ -2610,9 +2554,8 @@ static int mos7840_startup(struct usb_serial *serial) dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; - status = - mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, - Data); + status = mos7840_set_reg_sync(serial->port[i], + CLK_MULTI_REGISTER, Data); if (status < 0) { dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); @@ -2621,11 +2564,10 @@ static int mos7840_startup(struct usb_serial *serial) dbg("CLK_MULTI_REGISTER Writing success status%d\n", status); - //write value 0x0 to scratchpad register + /* write value 0x0 to scratchpad register */ Data = 0x00; - status = - mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, - Data); + status = mos7840_set_uart_reg(serial->port[i], + SCRATCH_PAD_REGISTER, Data); if (status < 0) { dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); @@ -2634,21 +2576,17 @@ static int mos7840_startup(struct usb_serial *serial) dbg("SCRATCH_PAD_REGISTER Writing success status%d\n", status); - //Zero Length flag register + /* Zero Length flag register */ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { Data = 0xff; - status = 0; status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16) - mos7840_port-> - port_num)), - Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num)), Data); dbg("ZLIP offset%x\n", (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num))); + ((__u16) mos7840_port->port_num))); if (status < 0) { dbg("Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); @@ -2658,13 +2596,9 @@ static int mos7840_startup(struct usb_serial *serial) i + 2, status); } else { Data = 0xff; - status = 0; status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16) - mos7840_port-> - port_num) - - 0x1), Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num) - 0x1), Data); dbg("ZLIP offset%x\n", (__u16) (ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); @@ -2679,14 +2613,16 @@ static int mos7840_startup(struct usb_serial *serial) } mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); - if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) { + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || + !mos7840_port->dr) { status = -ENOMEM; goto error; } } - //Zero Length flag enable + /* Zero Length flag enable */ Data = 0x0f; status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { @@ -2729,7 +2665,7 @@ static void mos7840_shutdown(struct usb_serial *serial) return; } - /* check for the ports to be closed,close the ports and disconnect */ + /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * * stop reads and writes on all ports */ @@ -2810,20 +2746,12 @@ static int __init moschip7840_init(void) /* Register with the usb */ retval = usb_register(&io_driver); - - if (retval) - goto failed_usb_register; - if (retval == 0) { dbg("%s\n", "Leaving..."); return 0; } - - failed_usb_register: usb_serial_deregister(&moschip7840_4port_device); - - failed_port_device_register: - +failed_port_device_register: return retval; } |