diff options
| -rw-r--r-- | drivers/net/wireless/ath/ath6kl/cfg80211.c | 82 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 34 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 70 | ||||
| -rw-r--r-- | net/mac80211/cfg.c | 146 | ||||
| -rw-r--r-- | net/mac80211/ieee80211_i.h | 2 | ||||
| -rw-r--r-- | net/mac80211/tx.c | 13 | ||||
| -rw-r--r-- | net/wireless/nl80211.c | 255 |
7 files changed, 316 insertions, 286 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index d1922d8eb3b..5370333883e 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2269,25 +2269,11 @@ static int ath6kl_set_ap_probe_resp_ies(struct ath6kl_vif *vif, return ret; } -static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info, bool add) +static int ath6kl_set_ies(struct ath6kl_vif *vif, + struct cfg80211_beacon_data *info) { - struct ath6kl *ar = ath6kl_priv(dev); - struct ath6kl_vif *vif = netdev_priv(dev); - struct ieee80211_mgmt *mgmt; - u8 *ies; - int ies_len; - struct wmi_connect_cmd p; + struct ath6kl *ar = vif->ar; int res; - int i, ret; - - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: add=%d\n", __func__, add); - - if (!ath6kl_cfg80211_ready(vif)) - return -EIO; - - if (vif->next_mode != AP_NETWORK) - return -EOPNOTSUPP; if (info->beacon_ies) { res = ath6kl_wmi_set_appie_cmd(ar->wmi, vif->fw_vif_idx, @@ -2297,12 +2283,14 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev, if (res) return res; } + if (info->proberesp_ies) { res = ath6kl_set_ap_probe_resp_ies(vif, info->proberesp_ies, info->proberesp_ies_len); if (res) return res; } + if (info->assocresp_ies) { res = ath6kl_wmi_set_appie_cmd(ar->wmi, vif->fw_vif_idx, WMI_FRAME_ASSOC_RESP, @@ -2312,8 +2300,30 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev, return res; } - if (!add) - return 0; + return 0; +} + +static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ap_settings *info) +{ + struct ath6kl *ar = ath6kl_priv(dev); + struct ath6kl_vif *vif = netdev_priv(dev); + struct ieee80211_mgmt *mgmt; + u8 *ies; + int ies_len; + struct wmi_connect_cmd p; + int res; + int i, ret; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s:\n", __func__); + + if (!ath6kl_cfg80211_ready(vif)) + return -EIO; + + if (vif->next_mode != AP_NETWORK) + return -EOPNOTSUPP; + + res = ath6kl_set_ies(vif, &info->beacon); ar->ap_mode_bkey.valid = false; @@ -2322,13 +2332,13 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev, * info->dtim_period */ - if (info->head == NULL) + if (info->beacon.head == NULL) return -EINVAL; - mgmt = (struct ieee80211_mgmt *) info->head; + mgmt = (struct ieee80211_mgmt *) info->beacon.head; ies = mgmt->u.beacon.variable; - if (ies > info->head + info->head_len) + if (ies > info->beacon.head + info->beacon.head_len) return -EINVAL; - ies_len = info->head + info->head_len - ies; + ies_len = info->beacon.head + info->beacon.head_len - ies; if (info->ssid == NULL) return -EINVAL; @@ -2436,19 +2446,21 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev, return 0; } -static int ath6kl_add_beacon(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info) +static int ath6kl_change_beacon(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_beacon_data *beacon) { - return ath6kl_ap_beacon(wiphy, dev, info, true); -} + struct ath6kl_vif *vif = netdev_priv(dev); -static int ath6kl_set_beacon(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info) -{ - return ath6kl_ap_beacon(wiphy, dev, info, false); + if (!ath6kl_cfg80211_ready(vif)) + return -EIO; + + if (vif->next_mode != AP_NETWORK) + return -EOPNOTSUPP; + + return ath6kl_set_ies(vif, beacon); } -static int ath6kl_del_beacon(struct wiphy *wiphy, struct net_device *dev) +static int ath6kl_stop_ap(struct wiphy *wiphy, struct net_device *dev) { struct ath6kl *ar = ath6kl_priv(dev); struct ath6kl_vif *vif = netdev_priv(dev); @@ -2783,9 +2795,9 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = { .resume = __ath6kl_cfg80211_resume, #endif .set_channel = ath6kl_set_channel, - .add_beacon = ath6kl_add_beacon, - .set_beacon = ath6kl_set_beacon, - .del_beacon = ath6kl_del_beacon, + .start_ap = ath6kl_start_ap, + .change_beacon = ath6kl_change_beacon, + .stop_ap = ath6kl_stop_ap, .del_station = ath6kl_del_station, .change_station = ath6kl_change_station, .remain_on_channel = ath6kl_remain_on_channel, diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index ad56e21a9f1..be35a68746a 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -156,21 +156,23 @@ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * - * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a - * %NL80222_CMD_NEW_BEACON message) - * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface - * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. - * Following attributes are provided for drivers that generate full Beacon - * and Probe Response frames internally: %NL80211_ATTR_SSID, + * @NL80211_CMD_GET_BEACON: (not used) + * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL + * attributes. For drivers that generate the beacon and probe responses + * internally, the following attributes must be provided: %NL80211_ATTR_IE, + * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters + * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that + * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, + * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, - * %NL80211_ATTR_IE_ASSOC_RESP. - * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, - * parameters are like for %NL80211_CMD_SET_BEACON. - * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY and + * %NL80211_ATTR_AUTH_TYPE. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP * * @NL80211_CMD_GET_STATION: Get station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. @@ -565,8 +567,10 @@ enum nl80211_commands { NL80211_CMD_GET_BEACON, NL80211_CMD_SET_BEACON, - NL80211_CMD_NEW_BEACON, - NL80211_CMD_DEL_BEACON, + NL80211_CMD_START_AP, + NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, + NL80211_CMD_STOP_AP, + NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, NL80211_CMD_GET_STATION, NL80211_CMD_SET_STATION, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e0c9ff3a197..755a7707a7c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -366,25 +366,13 @@ struct cfg80211_crypto_settings { }; /** - * struct beacon_parameters - beacon parameters - * - * Used to configure the beacon for an interface. - * + * struct cfg80211_beacon_data - beacon data * @head: head portion of beacon (before TIM IE) * or %NULL if not changed * @tail: tail portion of beacon (after TIM IE) * or %NULL if not changed - * @interval: beacon interval or zero if not changed - * @dtim_period: DTIM period or zero if not changed * @head_len: length of @head * @tail_len: length of @tail - * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from - * user space) - * @ssid_len: length of @ssid - * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames - * @crypto: crypto settings - * @privacy: the BSS uses privacy - * @auth_type: Authentication type (algorithm) * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL * @beacon_ies_len: length of beacon_ies in octets * @proberesp_ies: extra information element(s) to add into Probe Response @@ -396,24 +384,46 @@ struct cfg80211_crypto_settings { * @probe_resp_len: length of probe response template (@probe_resp) * @probe_resp: probe response template (AP mode only) */ -struct beacon_parameters { - u8 *head, *tail; - int interval, dtim_period; - int head_len, tail_len; +struct cfg80211_beacon_data { + const u8 *head, *tail; + const u8 *beacon_ies; + const u8 *proberesp_ies; + const u8 *assocresp_ies; + const u8 *probe_resp; + + size_t head_len, tail_len; + size_t beacon_ies_len; + size_t proberesp_ies_len; + size_t assocresp_ies_len; + size_t probe_resp_len; +}; + +/** + * struct cfg80211_ap_settings - AP configuration + * + * Used to configure an AP interface. + * + * @beacon: beacon data + * @beacon_interval: beacon interval + * @dtim_period: DTIM period + * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from + * user space) + * @ssid_len: length of @ssid + * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) + */ +struct cfg80211_ap_settings { + struct cfg80211_beacon_data beacon; + + int beacon_interval, dtim_period; const u8 *ssid; size_t ssid_len; enum nl80211_hidden_ssid hidden_ssid; struct cfg80211_crypto_settings crypto; bool privacy; enum nl80211_auth_type auth_type; - const u8 *beacon_ies; - size_t beacon_ies_len; - const u8 *proberesp_ies; - size_t proberesp_ies_len; - const u8 *assocresp_ies; - size_t assocresp_ies_len; - int probe_resp_len; - u8 *probe_resp; }; /** @@ -1518,11 +1528,11 @@ struct cfg80211_ops { struct net_device *netdev, u8 key_index); - int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info); - int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info); - int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev); + int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ap_settings *settings); + int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_beacon_data *info); + int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); int (*add_station)(struct wiphy *wiphy, struct net_device *dev, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c3de921c8cf..f7eb25aabf8 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -489,27 +489,13 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, return ret; } -static void ieee80211_config_ap_ssid(struct ieee80211_sub_if_data *sdata, - struct beacon_parameters *params) -{ - struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; - - bss_conf->ssid_len = params->ssid_len; - - if (params->ssid_len) - memcpy(bss_conf->ssid, params->ssid, params->ssid_len); - - bss_conf->hidden_ssid = - (params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); -} - static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, - u8 *resp, size_t resp_len) + const u8 *resp, size_t resp_len) { struct sk_buff *new, *old; if (!resp || !resp_len) - return -EINVAL; + return 1; old = rtnl_dereference(sdata->u.ap.probe_resp); @@ -520,50 +506,28 @@ static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, memcpy(skb_put(new, resp_len), resp, resp_len); rcu_assign_pointer(sdata->u.ap.probe_resp, new); - synchronize_rcu(); - - if (old) + if (old) { + /* TODO: use call_rcu() */ + synchronize_rcu(); dev_kfree_skb(old); + } return 0; } -/* - * This handles both adding a beacon and setting new beacon info - */ -static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, - struct beacon_parameters *params) +static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_beacon_data *params) { struct beacon_data *new, *old; int new_head_len, new_tail_len; - int size; - int err = -EINVAL; - u32 changed = 0; + int size, err; + u32 changed = BSS_CHANGED_BEACON; old = rtnl_dereference(sdata->u.ap.beacon); - /* head must not be zero-length */ - if (params->head && !params->head_len) - return -EINVAL; - - /* - * This is a kludge. beacon interval should really be part - * of the beacon information. - */ - if (params->interval && - (sdata->vif.bss_conf.beacon_int != params->interval)) { - sdata->vif.bss_conf.beacon_int = params->interval; - ieee80211_bss_info_change_notify(sdata, - BSS_CHANGED_BEACON_INT); - } - /* Need to have a beacon head if we don't have one yet */ if (!params->head && !old) - return err; - - /* sorry, no way to start beaconing without dtim period */ - if (!params->dtim_period && !old) - return err; + return -EINVAL; /* new or old head? */ if (params->head) @@ -586,12 +550,6 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, /* start filling the new info now */ - /* new or old dtim period? */ - if (params->dtim_period) - new->dtim_period = params->dtim_period; - else - new->dtim_period = old->dtim_period; - /* * pointers go into the block we allocated, * memory is | beacon_data | head | tail | @@ -614,46 +572,37 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, if (old) memcpy(new->tail, old->tail, new_tail_len); - sdata->vif.bss_conf.dtim_period = new->dtim_period; - - rcu_assign_pointer(sdata->u.ap.beacon, new); - - synchronize_rcu(); - - kfree(old); - err = ieee80211_set_probe_resp(sdata, params->probe_resp, params->probe_resp_len); - if (!err) + if (err < 0) + return err; + if (err == 0) changed |= BSS_CHANGED_AP_PROBE_RESP; - ieee80211_config_ap_ssid(sdata, params); - changed |= BSS_CHANGED_BEACON_ENABLED | - BSS_CHANGED_BEACON | - BSS_CHANGED_SSID; + rcu_assign_pointer(sdata->u.ap.beacon, new); + + if (old) + kfree_rcu(old, rcu_head); - ieee80211_bss_info_change_notify(sdata, changed); - return 0; + return changed; } -static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *params) +static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ap_settings *params) { - struct ieee80211_sub_if_data *sdata; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct beacon_data *old; struct ieee80211_sub_if_data *vlan; - int ret; - - sdata = IEEE80211_DEV_TO_SUB_IF(dev); + u32 changed = BSS_CHANGED_BEACON_INT | + BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_BEACON | + BSS_CHANGED_SSID; + int err; old = rtnl_dereference(sdata->u.ap.beacon); if (old) return -EALREADY; - ret = ieee80211_config_beacon(sdata, params); - if (ret) - return ret; - /* * Apply control port protocol, this allows us to * not encrypt dynamic WEP control frames. @@ -667,14 +616,32 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, params->crypto.control_port_no_encrypt; } + sdata->vif.bss_conf.beacon_int = params->beacon_interval; + sdata->vif.bss_conf.dtim_period = params->dtim_period; + + sdata->vif.bss_conf.ssid_len = params->ssid_len; + if (params->ssid_len) + memcpy(sdata->vif.bss_conf.ssid, params->ssid, + params->ssid_len); + sdata->vif.bss_conf.hidden_ssid = + (params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); + + err = ieee80211_assign_beacon(sdata, ¶ms->beacon); + if (err < 0) + return err; + changed |= err; + + ieee80211_bss_info_change_notify(sdata, changed); + return 0; } -static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *params) +static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_beacon_data *params) { struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + int err; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -682,10 +649,14 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, if (!old) return -ENOENT; - return ieee80211_config_beacon(sdata, params); + err = ieee80211_assign_beacon(sdata, params); + if (err < 0) + return err; + ieee80211_bss_info_change_notify(sdata, err); + return 0; } -static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) +static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) { struct ieee80211_sub_if_data *sdata; struct beacon_data *old; @@ -697,10 +668,11 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) return -ENOENT; RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); - synchronize_rcu(); - kfree(old); + + kfree_rcu(old, rcu_head); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + return 0; } @@ -2699,9 +2671,9 @@ struct cfg80211_ops mac80211_config_ops = { .get_key = ieee80211_get_key, .set_default_key = ieee80211_config_default_key, .set_default_mgmt_key = ieee80211_config_default_mgmt_key, - .add_beacon = ieee80211_add_beacon, - .set_beacon = ieee80211_set_beacon, - .del_beacon = ieee80211_del_beacon, + .start_ap = ieee80211_start_ap, + .change_beacon = ieee80211_change_beacon, + .stop_ap = ieee80211_stop_ap, .add_station = ieee80211_add_station, .del_station = ieee80211_del_station, .change_station = ieee80211_change_station, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 74594f012cd..67aed1eff13 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -228,7 +228,7 @@ struct ieee80211_rx_data { struct beacon_data { u8 *head, *tail; int head_len, tail_len; - int dtim_period; + struct rcu_head rcu_head; }; struct ieee80211_if_ap { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1be0ca2b593..c6eadac9ca4 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2206,7 +2206,8 @@ void ieee80211_tx_pending(unsigned long data) /* functions for drivers to get certain frames */ -static void ieee80211_beacon_add_tim(struct ieee80211_if_ap *bss, +static void ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, + struct ieee80211_if_ap *bss, struct sk_buff *skb, struct beacon_data *beacon) { @@ -2223,7 +2224,7 @@ static void ieee80211_beacon_add_tim(struct ieee80211_if_ap *bss, IEEE80211_MAX_AID+1); if (bss->dtim_count == 0) - bss->dtim_count = beacon->dtim_period - 1; + bss->dtim_count = sdata->vif.bss_conf.dtim_period - 1; else bss->dtim_count--; @@ -2231,7 +2232,7 @@ static void ieee80211_beacon_add_tim(struct ieee80211_if_ap *bss, *pos++ = WLAN_EID_TIM; *pos++ = 4; *pos++ = bss->dtim_count; - *pos++ = beacon->dtim_period; + *pos++ = sdata->vif.bss_conf.dtim_period; if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf)) aid0 = 1; @@ -2324,12 +2325,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, * of the tim bitmap in mac80211 and the driver. */ if (local->tim_in_locked_section) { - ieee80211_beacon_add_tim(ap, skb, beacon); + ieee80211_beacon_add_tim(sdata, ap, skb, + beacon); } else { unsigned long flags; spin_lock_irqsave(&local->tim_lock, flags); - ieee80211_beacon_add_tim(ap, skb, beacon); + ieee80211_beacon_add_tim(sdata, ap, skb, + beacon); spin_unlock_irqrestore(&local->tim_lock, flags); } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fe274765356..1998c368277 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -871,7 +871,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, CMD(add_virtual_intf, NEW_INTERFACE); CMD(change_virtual_intf, SET_INTERFACE); CMD(add_key, NEW_KEY); - CMD(add_beacon, NEW_BEACON); + CMD(start_ap, START_AP); CMD(add_station, NEW_STATION); CMD(add_mpath, NEW_MPATH); CMD(update_mesh_config, SET_MESH_CONFIG); @@ -2075,15 +2075,10 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) return err; } -static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) +static int nl80211_parse_beacon(struct genl_info *info, + struct cfg80211_beacon_data *bcn) { - int (*call)(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info); - struct cfg80211_registered_device *rdev = info->user_ptr[0]; - struct net_device *dev = info->user_ptr[1]; - struct wireless_dev *wdev = dev->ieee80211_ptr; - struct beacon_parameters params; - int haveinfo = 0, err; + bool haveinfo = false; if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]) || !is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]) || @@ -2091,149 +2086,183 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) !is_valid_ie_attr(info->attrs[NL80211_ATTR_IE_ASSOC_RESP])) return -EINVAL; - if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && - dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) - return -EOPNOTSUPP; - - memset(¶ms, 0, sizeof(params)); - - switch (info->genlhdr->cmd) { - case NL80211_CMD_NEW_BEACON: - /* these are required for NEW_BEACON */ - if (!info->attrs[NL80211_ATTR_BEACON_INTERVAL] || - !info->attrs[NL80211_ATTR_DTIM_PERIOD] || - !info->attrs[NL80211_ATTR_BEACON_HEAD]) - return -EINVAL; - - params.interval = - nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]); - params.dtim_period = - nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]); - - err = cfg80211_validate_beacon_int(rdev, params.interval); - if (err) - return err; - - /* - * In theory, some of these attributes could be required for - * NEW_BEACON, but since they were not used when the command was - * originally added, keep them optional for old user space - * programs to work with drivers that do not need the additional - * information. - */ - if (info->attrs[NL80211_ATTR_SSID]) { - params.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]); - params.ssid_len = - nla_len(info->attrs[NL80211_ATTR_SSID]); - if (params.ssid_len == 0 || - params.ssid_len > IEEE80211_MAX_SSID_LEN) - return -EINVAL; - } - - if (info->attrs[NL80211_ATTR_HIDDEN_SSID]) { - params.hidden_ssid = nla_get_u32( - info->attrs[NL80211_ATTR_HIDDEN_SSID]); - if (params.hidden_ssid != - NL80211_HIDDEN_SSID_NOT_IN_USE && - params.hidden_ssid != - NL80211_HIDDEN_SSID_ZERO_LEN && - params.hidden_ssid != - NL80211_HIDDEN_SSID_ZERO_CONTENTS) - return -EINVAL; - } - - params.privacy = !!info->attrs[NL80211_ATTR_PRIVACY]; - - if (info->attrs[NL80211_ATTR_AUTH_TYPE]) { - params.auth_type = nla_get_u32( - info->attrs[NL80211_ATTR_AUTH_TYPE]); - if (!nl80211_valid_auth_type(params.auth_type)) - return -EINVAL; - } else - params.auth_type = NL80211_AUTHTYPE_AUTOMATIC; - - err = nl80211_crypto_settings(rdev, info, ¶ms.crypto, - NL80211_MAX_NR_CIPHER_SUITES); - if (err) - return err; - - call = rdev->ops->add_beacon; - break; - case NL80211_CMD_SET_BEACON: - call = rdev->ops->set_beacon; - break; - default: - WARN_ON(1); - return -EOPNOTSUPP; - } - - if (!call) - return -EOPNOTSUPP; + memset(bcn, 0, sizeof(*bcn)); if (info->attrs[NL80211_ATTR_BEACON_HEAD]) { - params.head = nla_data(info->attrs[NL80211_ATTR_BEACON_HEAD]); - params.head_len = - nla_len(info->attrs[NL80211_ATTR_BEACON_HEAD]); - haveinfo = 1; + bcn->head = nla_data(info->attrs[NL80211_ATTR_BEACON_HEAD]); + bcn->head_len = nla_len(info->attrs[NL80211_ATTR_BEACON_HEAD]); + if (!bcn->head_len) + return -EINVAL; + haveinfo = true; } if (info->attrs[NL80211_ATTR_BEACON_TAIL]) { - params.tail = nla_data(info->attrs[NL80211_ATTR_BEACON_TAIL]); - params.tail_len = + bcn->tail = nla_data(info->attrs[NL80211_ATTR_BEACON_TAIL]); + bcn->tail_len = nla_len(info->attrs[NL80211_ATTR_BEACON_TAIL]); - haveinfo = 1; + haveinfo = true; } if (!haveinfo) return -EINVAL; if (info->attrs[NL80211_ATTR_IE]) { - params.beacon_ies = nla_data(info->attrs[NL80211_ATTR_IE]); - params.beacon_ies_len = nla_len(info->attrs[NL80211_ATTR_IE]); + bcn->beacon_ies = nla_data(info->attrs[NL80211_ATTR_IE]); + bcn->beacon_ies_len = nla_len(info->attrs[NL80211_ATTR_IE]); } if (info->attrs[NL80211_ATTR_IE_PROBE_RESP]) { - params.proberesp_ies = + bcn->proberesp_ies = nla_data(info->attrs[NL80211_ATTR_IE_PROBE_RESP]); - params.proberesp_ies_len = + bcn->proberesp_ies_len = nla_len(info->attrs[NL80211_ATTR_IE_PROBE_RESP]); } if (info->attrs[NL80211_ATTR_IE_ASSOC_RESP]) { - params.assocresp_ies = + bcn->assocresp_ies = nla_data(info->attrs[NL80211_ATTR_IE_ASSOC_RESP]); - params.assocresp_ies_len = + bcn->assocresp_ies_len = nla_len(info->attrs[NL80211_ATTR_IE_ASSOC_RESP]); } if (info->attrs[NL80211_ATTR_PROBE_RESP]) { - params.probe_resp = + bcn->probe_resp = nla_data(info->attrs[NL80211_ATTR_PROBE_RESP]); - params.probe_resp_len = + bcn->probe_resp_len = nla_len(info->attrs[NL80211_ATTR_PROBE_RESP]); } - err = call(&rdev->wiphy, dev, ¶ms); - if (!err && params.interval) - wdev->beacon_interval = params.interval; + return 0; +} + +static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_ap_settings params; + int err; + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) + return -EOPNOTSUPP; + + if (!rdev->ops->start_ap) + return -EOPNOTSUPP; + + if (wdev->beacon_interval) + return -EALREADY; + + memset(¶ms, 0, sizeof(params)); + + /* these are required for START_AP */ + if (!info->attrs[NL80211_ATTR_BEACON_INTERVAL] || + !info->attrs[NL80211_ATTR_DTIM_PERIOD] || + !info->attrs[NL80211_ATTR_BEACON_HEAD]) + return -EINVAL; + + err = nl80211_parse_beacon(info, ¶ms.beacon); + if (err) + return err; + + params.beacon_interval = + nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]); + params.dtim_period = + nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]); + + err = cfg80211_validate_beacon_int(rdev, params.beacon_interval); + if (err) + return err; + + /* + * In theory, some of these attributes should be required here + * but since they were not used when the command was originally + * added, keep them optional for old user space programs to let + * them continue to work with drivers that do not need the + * additional information -- drivers must check! + */ + if (info->attrs[NL80211_ATTR_SSID]) { + params.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]); + params.ssid_len = + nla_len(info->attrs[NL80211_ATTR_SSID]); + if (params.ssid_len == 0 || + params.ssid_len > IEEE80211_MAX_SSID_LEN) + return -EINVAL; + } + + if (info->attrs[NL80211_ATTR_HIDDEN_SSID]) { + params.hidden_ssid = nla_get_u32( + info->attrs[NL80211_ATTR_HIDDEN_SSID]); + if (params.hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE && + params.hidden_ssid != NL80211_HIDDEN_SSID_ZERO_LEN && + params.hidden_ssid != NL80211_HIDDEN_SSID_ZERO_CONTENTS) + return -EINVAL; + } + + params.privacy = !!info->attrs[NL80211_ATTR_PRIVACY]; + + if (info->attrs[NL80211_ATTR_AUTH_TYPE]) { + params.auth_type = nla_get_u32( + info->attrs[NL80211_ATTR_AUTH_TYPE]); + if (!nl80211_valid_auth_type(params.auth_type)) + return -EINVAL; + } else + params.auth_type = NL80211_AUTHTYPE_AUTOMATIC; + + err = nl80211_crypto_settings(rdev, info, ¶ms.crypto, + NL80211_MAX_NR_CIPHER_SUITES); + if (err) + return err; + + err = rdev->ops->start_ap(&rdev->wiphy, dev, ¶ms); + if (!err) + wdev->beacon_interval = params.beacon_interval; return err; } -static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info) +static int nl80211_set_beacon(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_beacon_data params; + int err; + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) + return -EOPNOTSUPP; + + if (!rdev->ops->change_beacon) + return -EOPNOTSUPP; + + if (!wdev->beacon_interval) + return -EINVAL; + + err = nl80211_parse_beacon(info, ¶ms); + if (err) + return err; + + return rdev->ops->change_beacon(&rdev->wiphy, dev, ¶ms); +} + +static int nl80211_stop_ap(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct net_device *dev = info->user_ptr[1]; struct wireless_dev *wdev = dev->ieee80211_ptr; int err; - if (!rdev->ops->del_beacon) + if (!rdev->ops->stop_ap) return -EOPNOTSUPP; if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) return -EOPNOTSUPP; - err = rdev->ops->del_beacon(&rdev->wiphy, dev); + if (!wdev->beacon_interval) + return -ENOENT; + + err = rdev->ops->stop_ap(&rdev->wiphy, dev); if (!err) wdev->beacon_interval = 0; return err; @@ -6357,23 +6386,23 @@ static struct genl_ops nl80211_ops[] = { .cmd = NL80211_CMD_SET_BEACON, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, - .doit = nl80211_addset_beacon, + .doit = nl80211_set_beacon, .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, { - .cmd = NL80211_CMD_NEW_BEACON, + .cmd = NL80211_CMD_START_AP, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, - .doit = nl80211_addset_beacon, + .doit = nl80211_start_ap, .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, { - .cmd = NL80211_CMD_DEL_BEACON, + .cmd = NL80211_CMD_STOP_AP, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, - .doit = nl80211_del_beacon, + .doit = nl80211_stop_ap, .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, |