diff options
80 files changed, 347 insertions, 270 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index f728ac2b298..ebb6c6f30c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -824,7 +824,7 @@ ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE M: Alexander Shiyan <shc_work@mail.ru> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Odd Fixes -F: arch/arm/mach-clps711x/ +N: clps711x ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE M: Hartley Sweeten <hsweeten@visionengravers.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6b4ac5de6de..79bea0b34d1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -423,6 +423,7 @@ config ARCH_EFM32 bool "Energy Micro efm32" depends on !MMU select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR select ARM_NVIC # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged, # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO @@ -698,6 +699,7 @@ config ARCH_RPC select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select CPU_SA110 select FIQ select HAVE_IDE select HAVE_PATA_PLATFORM @@ -732,6 +734,7 @@ config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS @@ -754,6 +757,7 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select COMMON_CLK @@ -765,7 +769,7 @@ config ARCH_S3C64XX select HAVE_TCM select NO_IOPORT select PLAT_SAMSUNG - select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS if PM select S3C_DEV_NAND select S3C_GPIO_TRACK select SAMSUNG_ATAGS @@ -776,6 +780,7 @@ config ARCH_S3C64XX config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V6 @@ -794,6 +799,7 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -813,6 +819,7 @@ config ARCH_S5PV210 select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -886,6 +893,12 @@ menu "Multiple platform selection" comment "CPU Core family selection" +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_FA526 + config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" depends on !ARCH_MULTI_V6_V7 diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 6d95d3df33c..79087ccf64b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -448,7 +448,7 @@ ti,hwmods = "usb_otg_hs"; status = "disabled"; - usb_ctrl_mod: control@44e10000 { + usb_ctrl_mod: control@44e10620 { compatible = "ti,am335x-usb-ctrl-module"; reg = <0x44e10620 0x10 0x44e10648 0x4>; @@ -551,7 +551,7 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index b42e658876e..457112d659e 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -287,6 +287,7 @@ regulator-name = "vdd_g3d"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; regulator-boot-on; op_mode = <1>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index d3f8a6e8ca2..69409f7e05d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -275,6 +275,8 @@ gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; ti,no-idle-on-init; + clocks = <&l3_div_ck>; + clock-names = "fck"; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a72813a9663..7a16647c76f 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -302,6 +302,8 @@ gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 73aecfb57cc..eb54353975b 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -715,7 +715,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; @@ -725,7 +724,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <22>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c6dcef513e5..0b54743c262 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -138,14 +138,9 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0", - "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -423,7 +418,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <32>; nvidia,pull-up-strength = <42>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; @@ -433,7 +427,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <20>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ab2f7378352..932b932c885 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -198,3 +198,5 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_T10DIF=m +CONFIG_GPIO_PCA953X=y +CONFIG_KEYBOARD_GPIO_POLLED=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index dbe1f1c47bb..4ce7b70ea90 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -94,7 +94,7 @@ CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_S5P=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_PHY=y diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 22a3b9b5d4a..4157aec4e30 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -74,6 +74,7 @@ struct secondary_data { }; extern struct secondary_data secondary_data; extern volatile int pen_release; +extern void secondary_startup(void); extern int __cpu_disable(void); diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index f98763f0bc1..3bc80599c02 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -53,8 +53,7 @@ #define checkuart(rp, rv, lhu, bit, uart) \ /* Load address of CLK_RST register */ \ - movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \ + ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \ /* Load value from CLK_RST register */ \ ldr rp, [rp, #0] ; \ /* Test UART's reset bit */ \ @@ -62,8 +61,7 @@ /* If set, can't use UART; jump to save no UART */ \ bne 90f ; \ /* Load address of CLK_OUT_ENB register */ \ - movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \ + ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \ /* Load value from CLK_OUT_ENB register */ \ ldr rp, [rp, #0] ; \ /* Test UART's clock enable bit */ \ @@ -71,8 +69,7 @@ /* If clear, can't use UART; jump to save no UART */ \ beq 90f ; \ /* Passed all tests, load address of UART registers */ \ - movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \ - movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \ + ldr rp, =TEGRA_UART##uart##_BASE ; \ /* Jump to save UART address */ \ b 91f @@ -90,15 +87,16 @@ #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA /* Check ODMDATA */ -10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff - movt \rp, #TEGRA_PMC_SCRATCH20 >> 16 +10: ldr \rp, =TEGRA_PMC_SCRATCH20 ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 - ubfx \rv, \rp, #18, #2 @ 19:18 are console type + lsr \rv, \rp, #18 @ 19:18 are console type + and \rv, \rv, #3 cmp \rv, #2 @ 2 and 3 mean DCC, UART beq 11f @ some boards swap the meaning cmp \rv, #3 @ so accept either bne 90f -11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID +11: lsr \rv, \rp, #15 @ 17:15 are UART ID + and \rv, #7 cmp \rv, #0 @ UART 0? beq 20f cmp \rv, #1 @ UART 1? diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f0e800e7e7..9968f208b7d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -57,6 +57,7 @@ config SOC_SAMA5 select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ + select USE_OF menu "Atmel AT91 System-on-Chip" @@ -64,11 +65,22 @@ choice prompt "Core type" +config ARCH_AT91X40 + bool "ARM7 AT91X40" + depends on !MMU + select CPU_ARM7TDMI + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + + help + Select this if you are using one of Atmel's AT91X40 SoC. + config SOC_SAM_V4_V5 - bool "ARM7/ARM9" + bool "ARM9 AT91SAM9/AT91RM9200" help - Select this if you are using one of Atmel's AT91SAM9, AT91RM9200 - or AT91X40 SoC. + Select this if you are using one of Atmel's AT91SAM9 or + AT91RM9200 SoC. config SOC_SAM_V7 bool "Cortex A5" @@ -179,9 +191,12 @@ config SOC_AT91SAM9N12 Select this if you are using Atmel's AT91SAM9N12 SoC. # ---------------------------------------------------------- +endif # SOC_SAM_V4_V5 + +if SOC_SAM_V4_V5 || ARCH_AT91X40 source arch/arm/mach-at91/Kconfig.non_dt -endif # SOC_SAM_V4_V5 +endif comment "Generic Board Type" diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 1f73e9b527d..44ace320d2e 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD choice prompt "Atmel AT91 Processor Devices for non DT boards" + depends on !ARCH_AT91X40 config ARCH_AT91_NONE bool "None" @@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45 select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK -config ARCH_AT91X40 - bool "AT91x40" - depends on !MMU - select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - endchoice config ARCH_AT91SAM9G20 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index eda8d1679d4..1630ae64d3f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1255,12 +1255,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */ at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */ - if (data->flags & AT91_CF_TRUE_IDE) -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) + if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)) pdev->name = "pata_at91"; -#else -#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" -#endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index b26156bf15d..826315af6d1 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs, { sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_write_mode); static void sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config *config) @@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs, { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_configure); static void sam9_smc_cs_read_mode(void __iomem *base, struct sam9_smc_config *config) @@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs, { sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_read_mode); static void sam9_smc_cs_read(void __iomem *base, struct sam9_smc_config *config) diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f7ca97b7291..f7a07a58ebb 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr) panic("Impossible to ioremap at91_matrix_base\n"); } -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) static struct of_device_id rstc_ids[] = { { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index f8d71a89644..5f831133178 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -73,7 +73,7 @@ #define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ #define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) #define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) -#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 4) /* LCD contrast digital potentiometer */ #define AUTCPU12_DPOT_CS CLPS711X_GPIO(4, 0) diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index ce096d678aa..d863d8729ed 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -246,7 +246,6 @@ static void __init cns3420_map_io(void) MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .atag_offset = 0x100, - .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 384dc859e6c..2ae28a69e3e 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -47,6 +47,38 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), .length = SZ_4K, .type = MT_DEVICE, +#ifdef CONFIG_PCI + }, { + .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE), + .length = SZ_64K, /* really 4 KiB at offset 32 KiB */ + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE), + .length = SZ_64K, /* really 4 KiB at offset 32 KiB */ + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, +#endif }, }; @@ -368,7 +400,6 @@ static const char *cns3xxx_dt_compat[] __initdata = { DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx") .dt_compat = cns3xxx_dt_compat, - .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3xxx_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index c7b204bff38..413134c5445 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -23,15 +23,10 @@ #include "cns3xxx.h" #include "core.h" -enum cns3xxx_access_type { - CNS3XXX_HOST_TYPE = 0, - CNS3XXX_CFG0_TYPE, - CNS3XXX_CFG1_TYPE, - CNS3XXX_NUM_ACCESS_TYPES, -}; - struct cns3xxx_pcie { - struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES]; + void __iomem *host_regs; /* PCI config registers for host bridge */ + void __iomem *cfg0_regs; /* PCI Type 0 config registers */ + void __iomem *cfg1_regs; /* PCI Type 1 config registers */ unsigned int irqs[2]; struct resource res_io; struct resource res_mem; @@ -66,7 +61,6 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, int busno = bus->number; int slot = PCI_SLOT(devfn); int offset; - enum cns3xxx_access_type type; void __iomem *base; /* If there is no link, just show the CNS PCI bridge. */ @@ -78,17 +72,21 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, * we still want to access it. For this to work, we must place * the first device on the same bus as the CNS PCI bridge. */ - if (busno == 0) { - if (slot > 1) - return NULL; - type = slot; - } else { - type = CNS3XXX_CFG1_TYPE; - } + if (busno == 0) { /* directly connected PCIe bus */ + switch (slot) { + case 0: /* host bridge device, function 0 only */ + base = cnspci->host_regs; + break; + case 1: /* directly connected device */ + base = cnspci->cfg0_regs; + break; + default: + return NULL; /* no such device */ + } + } else /* remote PCI bus */ + base = cnspci->cfg1_regs; - base = (void __iomem *)cnspci->cfg_bases[type].virtual; offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc); - return base + offset; } @@ -180,36 +178,19 @@ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) static struct cns3xxx_pcie cns3xxx_pcie[] = { [0] = { - .cfg_bases = { - [CNS3XXX_HOST_TYPE] = { - .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG0_TYPE] = { - .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG1_TYPE] = { - .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - }, + .host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT, + .cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT, + .cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT, .res_io = { .name = "PCIe0 I/O space", .start = CNS3XXX_PCIE0_IO_BASE, - .end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */ .flags = IORESOURCE_IO, }, .res_mem = { .name = "PCIe0 non-prefetchable", .start = CNS3XXX_PCIE0_MEM_BASE, - .end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */ .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, @@ -222,36 +203,19 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = { }, }, [1] = { - .cfg_bases = { - [CNS3XXX_HOST_TYPE] = { - .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG0_TYPE] = { - .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG1_TYPE] = { - .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - }, + .host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT, + .cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT, + .cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT, .res_io = { .name = "PCIe1 I/O space", .start = CNS3XXX_PCIE1_IO_BASE, - .end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */ .flags = IORESOURCE_IO, }, .res_mem = { .name = "PCIe1 non-prefetchable", .start = CNS3XXX_PCIE1_MEM_BASE, - .end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */ .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, @@ -307,18 +271,15 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) .ops = &cns3xxx_pcie_ops, .sysdata = &sd, }; - u32 io_base = cnspci->res_io.start >> 16; - u32 mem_base = cnspci->res_mem.start >> 16; - u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn; - u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn; + u16 mem_base = cnspci->res_mem.start >> 16; + u16 mem_limit = cnspci->res_mem.end >> 16; + u16 io_base = cnspci->res_io.start >> 16; + u16 io_limit = cnspci->res_io.end >> 16; u32 devfn = 0; u8 tmp8; u16 pos; u16 dc; - host_base = (__pfn_to_phys(host_base) - 1) >> 16; - cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16; - pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0); pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1); pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1); @@ -328,9 +289,9 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8); pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base); - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base); + pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit); pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base); - pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base); + pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit); if (!cnspci->linked) return; @@ -368,8 +329,6 @@ static int __init cns3xxx_pcie_init(void) "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { - iotable_init(cns3xxx_pcie[i].cfg_bases, - ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a075b3e0c5c..626d2b82d0f 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -214,11 +214,6 @@ config DA850_WL12XX Say Y if you want to use a wl1271 expansion card connected to the AM18x EVM. -config GPIO_PCA953X - default MACH_DAVINCI_DA850_EVM - -config KEYBOARD_GPIO_POLLED - default MACH_DAVINCI_DA850_EVM config MACH_TNETV107X bool "TI TNETV107X Reference Platform" diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 987605b7855..3de4dc9a169 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -799,11 +799,12 @@ static __init void davinci_evm_init(void) /* irlml6401 switches over 1A, in under 8 msec */ davinci_setup_usb(1000, 8); - soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; - /* Register the fixup for PHY on DaVinci */ - phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, - davinci_phy_fixup); - + if (IS_BUILTIN(CONFIG_PHYLIB)) { + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } } MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 157ba88433c..fd021ba539f 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -242,6 +242,7 @@ unsigned int ep93xx_chip_revision(void) v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; return v; } +EXPORT_SYMBOL_GPL(ep93xx_chip_revision); /************************************************************************* * EP93xx GPIO diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f18be40e5b2..8d0042c9d4d 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -404,8 +404,10 @@ static int __init exynos4_l2x0_cache_init(void) if (ret) return ret; - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + if (IS_ENABLED(CONFIG_S5P_SLEEP)) { + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + } return 0; } early_initcall(exynos4_l2x0_cache_init); diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index f57cb91f02a..93d2decc112 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -14,6 +14,7 @@ #include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/export.h> +#include <linux/module.h> #include <linux/time.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index fba55fb9f47..07152d00fc5 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST select FOOTBRIDGE_HOST select ISA select ISA_DMA + select ARCH_MAY_HAVE_PC_FDC select PCI help Say Y here if you intend to run this kernel on the EBSA285 card @@ -94,6 +95,5 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 bool - select ARCH_MAY_HAVE_PC_FDC endif diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 0b64dd430d6..c3faa3bc84d 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -4,11 +4,12 @@ # Object file lists. -obj-y := common.o dc21285.o dma.o isa-irq.o +obj-y := common.o dma.o isa-irq.o obj-m := obj-n := obj- := +pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 9669cc0b631..da041509485 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -78,9 +78,11 @@ __initcall(cats_hw_init); static void __init fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) { +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) screen_info.orig_video_lines = 25; screen_info.orig_video_points = 16; screen_info.orig_y = 24; +#endif } MACHINE_START(CATS, "Chalice-CATS") diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 6870058d0a4..2ae1b59267c 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -3,5 +3,4 @@ # obj-y += hisilicon.o -obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_SMP) += platsmp.o hotplug.o diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index b909854eee7..abd441b0c60 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -178,6 +178,7 @@ static inline void cpu_enter_lowpower(void) : "cc"); } +#ifdef CONFIG_HOTPLUG_CPU void hi3xxx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); @@ -198,3 +199,4 @@ int hi3xxx_cpu_kill(unsigned int cpu) hi3xxx_set_cpu(cpu, false); return 1; } +#endif diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index abeff25532a..271a255864d 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO select MIGHT_HAVE_PCI - select SERIAL_AMBA_PL010 - select SERIAL_AMBA_PL010_CONSOLE + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator/AP and @@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP select ARCH_CINTEGRATOR select ARM_TIMER_SP804 select PLAT_VERSATILE_CLCD - select SERIAL_AMBA_PL011 - select SERIAL_AMBA_PL011_CONSOLE + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 200970d56f6..4977296f0c7 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -315,33 +315,6 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r return 0; } - -static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dma_addr + size) >= SZ_64M; -} - -/* - * Setup DMA mask to 64MB on PCI devices. Ignore all other devices. - */ -static int ixp4xx_pci_platform_notify(struct device *dev) -{ - if (dev_is_pci(dev)) { - *dev->dma_mask = SZ_64M - 1; - dev->coherent_dma_mask = SZ_64M - 1; - dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); - } - return 0; -} - -static int ixp4xx_pci_platform_notify_remove(struct device *dev) -{ - if (dev_is_pci(dev)) - dmabounce_unregister_dev(dev); - - return 0; -} - void __init ixp4xx_pci_preinit(void) { unsigned long cpuid = read_cpuid_id(); @@ -475,20 +448,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); - platform_notify = ixp4xx_pci_platform_notify; - platform_notify_remove = ixp4xx_pci_platform_notify_remove; - return 1; } -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - if (mask >= SZ_64M - 1) - return 0; - - return -EIO; -} - EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); -EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index a465f27bc26..be882c95bd3 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -30,8 +30,8 @@ #include <linux/export.h> #include <linux/gpio.h> #include <linux/cpu.h> +#include <linux/pci.h> #include <linux/sched_clock.h> - #include <mach/udc.h> #include <mach/hardware.h> #include <mach/io.h> @@ -40,7 +40,6 @@ #include <asm/page.h> #include <asm/irq.h> #include <asm/system_misc.h> - #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -578,6 +577,54 @@ void ixp4xx_restart(enum reboot_mode mode, const char *cmd) } } +#ifdef CONFIG_PCI +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return (dma_addr + size) > SZ_64M; +} + +static int ixp4xx_platform_notify_remove(struct device *dev) +{ + if (dev_is_pci(dev)) + dmabounce_unregister_dev(dev); + + return 0; +} +#endif + +/* + * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. + */ +static int ixp4xx_platform_notify(struct device *dev) +{ + dev->dma_mask = &dev->coherent_dma_mask; + +#ifdef CONFIG_PCI + if (dev_is_pci(dev)) { + dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); + return 0; + } +#endif + + dev->coherent_dma_mask = DMA_BIT_MASK(32); + return 0; +} + +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (dev_is_pci(dev)) + mask &= DMA_BIT_MASK(28); /* 64 MB */ + + if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { + dev->coherent_dma_mask = mask; + return 0; + } + + return -EIO; /* device wanted sub-64MB mask */ +} +EXPORT_SYMBOL(dma_set_coherent_mask); + #ifdef CONFIG_IXP4XX_INDIRECT_PCI /* * In the case of using indirect PCI, we simply return the actual PCI @@ -600,12 +647,16 @@ static void ixp4xx_iounmap(void __iomem *addr) if (!is_pci_memory((__force u32)addr)) __iounmap(addr); } +#endif void __init ixp4xx_init_early(void) { + platform_notify = ixp4xx_platform_notify; +#ifdef CONFIG_PCI + platform_notify_remove = ixp4xx_platform_notify_remove; +#endif +#ifdef CONFIG_IXP4XX_INDIRECT_PCI arch_ioremap_caller = ixp4xx_ioremap_caller; arch_iounmap = ixp4xx_iounmap; -} -#else -void __init ixp4xx_init_early(void) {} #endif +} diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index e54ff491c10..80bd9d6d04d 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -4,6 +4,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/hdlc.h> #include <linux/i2c-gpio.h> #include <linux/io.h> @@ -79,19 +80,19 @@ static u8 control_value; static void set_scl(u8 value) { - gpio_line_set(GPIO_SCL, !!value); + gpio_set_value(GPIO_SCL, !!value); udelay(3); } static void set_sda(u8 value) { - gpio_line_set(GPIO_SDA, !!value); + gpio_set_value(GPIO_SDA, !!value); udelay(3); } static void set_str(u8 value) { - gpio_line_set(GPIO_STR, !!value); + gpio_set_value(GPIO_STR, !!value); udelay(3); } @@ -108,8 +109,8 @@ static void output_control(void) { int i; - gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); for (i = 0; i < 8; i++) { set_scl(0); @@ -151,8 +152,8 @@ static int hss_set_clock(int port, unsigned int clock_type) static irqreturn_t hss_dcd_irq(int irq, void *pdev) { - int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); - gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); + int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); set_carrier_cb_tab[port](pdev, !i); return IRQ_HANDLED; } @@ -168,7 +169,7 @@ static int hss_open(int port, void *pdev, else irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); - gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); set_carrier_cb(pdev, !i); set_carrier_cb_tab[!!port] = set_carrier_cb; @@ -181,7 +182,7 @@ static int hss_open(int port, void *pdev, set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); output_control(); - gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); return 0; } @@ -193,7 +194,7 @@ static void hss_close(int port, void *pdev) set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); output_control(); - gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); } @@ -413,13 +414,21 @@ static void __init gmlr_init(void) if (hw_bits & CFG_HW_HAS_EEPROM) device_tab[devices++] = &device_i2c; /* max index 6 */ - gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); - gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); + gpio_request(GPIO_SCL, "SCL/clock"); + gpio_request(GPIO_SDA, "SDA/data"); + gpio_request(GPIO_STR, "strobe"); + gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS"); + gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS"); + gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD"); + gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD"); + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + gpio_direction_output(GPIO_STR, 0); + gpio_direction_output(GPIO_HSS0_RTS_N, 1); + gpio_direction_output(GPIO_HSS1_RTS_N, 1); + gpio_direction_input(GPIO_HSS0_DCD_N); + gpio_direction_input(GPIO_HSS1_DCD_N); irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 5cf30d1b78d..559c69a4773 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -48,9 +48,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); * fallback to the default. */ +extern unsigned long pcibios_min_mem; static inline int is_pci_memory(u32 addr) { - return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF); + return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF); } #define writeb(v, p) __indirect_writeb(v, p) diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 75ef03dc996..2d494b45437 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -17,9 +17,7 @@ #include <linux/serial_8250.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#ifdef CONFIG_LEDS_CLASS #include <linux/leds.h> -#endif #include <asm/setup.h> #include <asm/memory.h> diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 002bc619bb6..f2658168eef 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -44,7 +44,8 @@ static void __init og_register_pci(void) if (machine_is_im4004()) ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW); - ks8695_init_pci(&og_pci); + if (IS_ENABLED(CONFIG_PCI)) + ks8695_init_pci(&og_pci); } /* diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index d7aa54c25c5..de03620d7fa 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -99,6 +99,7 @@ u32 lpc32xx_return_iram_size(void) return iram_size; } +EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size); /* * Computes PLL rate from PLL register and input clock diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 0c002099c3a..7e0248582ef 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -231,7 +231,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { .debounce_interval = 30, }; -#if defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_EHCI_MV) static struct mv_usb_platform_data pxa168_sph_pdata = { .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, @@ -258,7 +258,7 @@ static void __init common_init(void) /* off-chip devices */ platform_device_register(&smc91x_device); -#if defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_EHCI_MV) pxa168_add_usb_host(&pxa168_sph_pdata); #endif } diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index dd2d8b103cc..2bcb766af05 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -72,7 +72,7 @@ int __init pxa_register_device(struct pxa_device_desc *desc, return platform_device_add(pdev); } -#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET) +#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET) /***************************************************************************** * The registers read/write routines @@ -112,9 +112,9 @@ static void u2o_write(void __iomem *base, unsigned int offset, readl_relaxed(base + offset); } -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV) -#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168) +#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168) static DEFINE_MUTEX(phy_lock); static int phy_init_cnt; @@ -238,10 +238,10 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg) #endif #endif -#ifdef CONFIG_USB_SUPPORT +#if IS_ENABLED(CONFIG_USB_SUPPORT) static u64 usb_dma_mask = ~(u32)0; -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { /* regbase */ [0] = { @@ -276,7 +276,7 @@ struct platform_device pxa168_device_u2o = { }; #endif /* CONFIG_USB_MV_UDC */ -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) struct resource pxa168_u2oehci_resources[] = { /* regbase */ [0] = { @@ -312,7 +312,7 @@ struct platform_device pxa168_device_u2oehci = { }; #endif -#if defined(CONFIG_USB_MV_OTG) +#if IS_ENABLED(CONFIG_USB_MV_OTG) struct resource pxa168_u2ootg_resources[] = { /* regbase */ [0] = { diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index cfadd974f5c..ac4af81de3e 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -164,8 +164,8 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { }, }; -#ifdef CONFIG_USB_SUPPORT -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) +#if IS_ENABLED(CONFIG_USB_SUPPORT) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) static struct mv_usb_platform_data ttc_usb_pdata = { .vbus = NULL, @@ -178,14 +178,14 @@ static struct mv_usb_platform_data ttc_usb_pdata = { #endif #endif -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) static struct pxa3xx_nand_platform_data dkb_nand_info = { .enable_arbiter = 1, .num_cs = 1, }; #endif -#ifdef CONFIG_MMP_DISP +#if IS_ENABLED(CONFIG_MMP_DISP) /* path config */ #define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */ #define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */ @@ -275,7 +275,7 @@ static void __init ttc_dkb_init(void) /* on-chip devices */ pxa910_add_uart(1); -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) pxa910_add_nand(&dkb_nand_info); #endif @@ -285,22 +285,22 @@ static void __init ttc_dkb_init(void) sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2o); #endif -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2oehci); #endif -#ifdef CONFIG_USB_MV_OTG +#if IS_ENABLED(CONFIG_USB_MV_OTG) pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2ootg); #endif -#ifdef CONFIG_MMP_DISP +#if IS_ENABLED(CONFIG_MMP_DISP) add_disp(); #endif } diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 3795ae28a61..e9b45bb5826 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,5 +1,5 @@ config ARCH_MOXART - bool "MOXA ART SoC" if ARCH_MULTI_V4T + bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE select USE_OF diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index f8f6adfa07c..fb976246471 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/completion.h> +#include <linux/module.h> #include <mach/dma.h> #include <mach/msm_iomap.h> @@ -77,6 +78,7 @@ void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { writel((graceful << 31), DMOV_FLUSH0(id)); } +EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd); void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { @@ -115,6 +117,7 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) } spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); } +EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd); struct msm_dmov_exec_cmdptr_cmd { struct msm_dmov_cmd dmov_cmd; diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index adc8971c726..34e09474636 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -78,8 +78,10 @@ void __init msm_map_common_io(void) asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ defined(CONFIG_DEBUG_MSM_UART3) +#ifdef CONFIG_MMU debug_ll_addr(&msm_io_desc[size - 1].pfn, &msm_io_desc[size - 1].virtual); +#endif msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn); #endif iotable_init(msm_io_desc, size); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index f6c9d1d85c1..5b793ebb0a2 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -21,6 +21,7 @@ #include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/mbus.h> +#include <linux/signal.h> #include <linux/slab.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 4b2ed2e8352..3d24ebf1209 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -63,7 +63,7 @@ static void __init nspire_init(void) nspire_auxdata, NULL); } -static void nspire_restart(char mode, const char *cmd) +static void nspire_restart(enum reboot_mode mode, const char *cmd) { void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); if (!base) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index fd90cafc2e3..65d2acb3149 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -318,6 +318,9 @@ static void __init h2_init_smc91x(void) static int tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index d68909b095f..3a0262156e9 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = { static int osk_tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + /* Set GPIO 1 HIGH to disable VBUS power supply; * OHCI driver powers it up/down as needed. */ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 40a1ae31961..dbee729e3b6 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -71,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; -#ifdef CONFIG_OMAP_32K_TIMER +#ifndef CONFIG_OMAP_32K_TIMER + +static unsigned short enable_dyn_sleep = 0; + +#else static unsigned short enable_dyn_sleep = 1; diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index e022a869bff..6037a9a01ed 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -222,6 +222,7 @@ void __init ti81xx_init_irq(void) static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) { u32 irqnr; + int handled_irq = 0; do { irqnr = readl_relaxed(base_addr + 0x98); @@ -249,8 +250,15 @@ out: if (irqnr) { irqnr = irq_find_mapping(domain, irqnr); handle_IRQ(irqnr, regs); + handled_irq = 1; } } while (irqnr); + + /* If an irq is masked or deasserted while active, we will + * keep ending up here with no irq handled. So remove it from + * the INTC with an ack.*/ + if (!handled_irq) + omap_ack_irq(NULL); } asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3318cae96e7..1219280bb97 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2541,8 +2541,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = { .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 7bdd22afce6..d4d0fce325c 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -103,7 +103,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { } #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) -#if defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) #else diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2cb2f06c20f..14f2cae4109 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -33,7 +33,6 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select I2C_BOARDINFO - select PHYLIB help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 70974732cbf..56edeab17b6 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -642,6 +642,8 @@ static void __init dns323_init(void) platform_device_register_simple("dns323c-fan", 0, NULL, 0); /* Register fixup for the PHY LEDs */ + if (!IS_BUILTIN(CONFIG_PHYLIB)) + break; phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK, dns323c_phy_fixup); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96100dbf5a2..a280cc42636 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -53,12 +53,16 @@ config MACH_TAVOREVB select CPU_PXA930 select CPU_PXA935 select PXA3xx + select FB + select FB_PXA config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select CPU_PXA930 select CPU_PXA935 select PXA3xx + select FB + select FB_PXA comment "Third Party Dev Platforms (sorted by vendor name)" @@ -69,8 +73,7 @@ config ARCH_PXA_IDP config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select ARCOM_PCMCIA - select HAVE_PWM - select I2C_GPIO + select I2C_GPIO if I2C=y select ISA select PXA25x select PXA_HAVE_ISA_IRQS @@ -164,7 +167,6 @@ config MACH_XCEP select MTD_CFI_INTELEXT select MTD_PHYSMAP select PXA25x - select SMC91X help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. @@ -181,6 +183,7 @@ config MACH_TRIZEPS4 config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA + select MACH_TRIZEPS4 select PXA27x select TRIZEPS_PCMCIA diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 2f71b3fbd31..43596e0ed05 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -331,7 +331,6 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = { static void __init balloon3_udc_init(void) { pxa_set_udc_info(&balloon3_udc_info); - platform_device_register(&balloon3_gpio_vbus); } #else static inline void balloon3_udc_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 8404b24240e..638b0bb8842 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <asm/io.h> #include <mach/pxa27x.h> #include <mach/colibri.h> diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 2022e092f0c..db09170e383 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -56,6 +56,8 @@ #define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) #define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) +#define PHYS_OFFSET PLAT_PHYS_OFFSET + #define __phys_to_virt(phys) \ ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d876431d64c..f2727f2cc66 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -537,7 +537,7 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 + select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT @@ -573,7 +573,7 @@ config MACH_OSIRIS config MACH_OSIRIS_DVS tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" depends on MACH_OSIRIS - select TPS65010 + depends on TPS65010 help Say Y/M here if you want to have dynamic voltage scaling support on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 4adaa4b43ff..1d77d709ec2 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -484,7 +484,7 @@ struct platform_device s3c2440_device_dma = { }; #endif -#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416) +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) static struct resource s3c2443_dma_resource[] = { [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index d9170e9f8cc..ee7bb2905a9 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -196,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work) * If the PCF50633 ADC is disabled we fallback to a * 100mA limit for safety. */ - pcf50633_mbc_usb_curlim_set(pcf, 100); + pcf50633_mbc_usb_curlim_set(gta02_pcf, 100); #endif } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 64f04e6f9c3..3136d86b0d6 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -86,8 +86,7 @@ config MACH_SMDK6400 bool "SMDK6400" select CPU_S3C6400 select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC - select S3C_DEV_NAND + select S3C_DEV_HSMMC1 help Machine support for the Samsung SMDK6400 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 1649c0d1c1b..ddf65583a5d 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -55,7 +55,13 @@ static struct irq_grp_save { u32 mask; } eint_grp_save[5]; -static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; +#ifndef CONFIG_SERIAL_SAMSUNG_UARTS +#define SERIAL_SAMSUNG_UARTS 0 +#else +#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS +#endif + +static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; static int s3c64xx_irq_pm_suspend(void) { @@ -66,7 +72,7 @@ static int s3c64xx_irq_pm_suspend(void) s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { @@ -87,7 +93,7 @@ static void s3c64xx_irq_pm_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 7ccfef227c7..9c00d83f715 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -401,4 +401,4 @@ static int __init wlf_gf_module_register(void) { return i2c_add_driver(&wlf_gf_module_driver); } -module_init(wlf_gf_module_register); +device_initcall(wlf_gf_module_register); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 42e14f2e7ca..f07edc304ef 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -205,6 +205,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) samsung_pwm_set_platdata(&s5p64x0_pwm_variant); } +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_map_io(void) { /* initialize any device information early */ @@ -218,7 +219,9 @@ void __init s5p6440_map_io(void) iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_map_io(void) { /* initialize any device information early */ @@ -232,13 +235,14 @@ void __init s5p6450_map_io(void) iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); } +#endif /* * s5p64x0_init_clocks * * register and setup the CPU clocks */ - +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -248,7 +252,9 @@ void __init s5p6440_init_clocks(int xtal) s5p6440_register_clocks(); s5p6440_setup_clocks(); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -258,13 +264,14 @@ void __init s5p6450_init_clocks(int xtal) s5p6450_register_clocks(); s5p6450_setup_clocks(); } +#endif /* * s5p64x0_init_irq * * register the CPU interrupts */ - +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_irq(void) { /* S5P6440 supports 2 VIC */ @@ -279,7 +286,9 @@ void __init s5p6440_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_irq(void) { /* S5P6450 supports only 2 VIC */ @@ -294,6 +303,7 @@ void __init s5p6450_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } +#endif struct bus_type s5p64x0_subsys = { .name = "s5p64x0-core", @@ -321,6 +331,7 @@ int __init s5p64x0_init(void) } /* uart registration process */ +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) { int uart; @@ -332,11 +343,14 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } +#endif #define eint_offset(irq) ((irq) - IRQ_EINT(0)) diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h index f3a9b43cba4..cbe7f3d731d 100644 --- a/arch/arm/mach-s5p64x0/common.h +++ b/arch/arm/mach-s5p64x0/common.h @@ -25,10 +25,10 @@ void s5p6450_register_clocks(void); void s5p6450_setup_clocks(void); void s5p64x0_restart(enum reboot_mode mode, const char *cmd); +extern int s5p64x0_init(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p64x0_init(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); @@ -38,12 +38,10 @@ extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p64x0_init NULL #endif #ifdef CONFIG_CPU_S5P6450 -extern int s5p64x0_init(void); extern void s5p6450_map_io(void); extern void s5p6450_init_clocks(int xtal); @@ -53,7 +51,6 @@ extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); #define s5p6450_init_clocks NULL #define s5p6450_init_uarts NULL #define s5p6450_map_io NULL -#define s5p64x0_init NULL #endif #endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c index 3e6f2456ee9..d5f0fd66b63 100644 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -34,7 +34,9 @@ static struct irq_grp_save { u32 mask; } eint_grp_save[4]; +#ifdef CONFIG_SERIAL_SAMSUNG static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; +#endif static int s5p64x0_irq_pm_suspend(void) { @@ -45,8 +47,10 @@ static int s5p64x0_irq_pm_suspend(void) s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); +#ifdef CONFIG_SERIAL_SAMSUNG for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); +#endif for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4)); @@ -66,8 +70,10 @@ static void s5p64x0_irq_pm_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); +#ifdef CONFIG_SERIAL_SAMSUNG for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); +#endif for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4)); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index caaedafbbf5..8c3abe52175 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -189,6 +189,7 @@ config MACH_TORBRECK select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_SDHCI + select SAMSUNG_DEV_IDE help Machine support for aESOP Torbreck diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index d9397202d6e..27b168f121a 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S deleted file mode 100644 index a10d494fb37..00000000000 --- a/arch/arm/mach-sunxi/headsmp.S +++ /dev/null @@ -1,9 +0,0 @@ -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(sun6i_secondary_startup) - msr cpsr_fsxc, #0xd3 - b secondary_startup -ENDPROC(sun6i_secondary_startup) diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 7b141d8342a..0c7dbce033c 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -82,7 +82,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu, spin_lock(&cpu_lock); /* Set CPU boot address */ - writel(virt_to_phys(sun6i_secondary_startup), + writel(virt_to_phys(secondary_startup), cpucfg_membase + CPUCFG_PRIVATE0_REG); /* Assert the CPU core in reset */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ca8ecdee47d..241622e2fea 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -264,7 +264,7 @@ config CPU_ARM1026 # SA110 config CPU_SA110 - bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC + bool select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 58645a58d0d..b57e922f161 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -427,8 +427,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" - depends on PM - select DEBUG_LL + depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> @@ -445,7 +444,8 @@ config S3C_PM_DEBUG_LED_SMDK config SAMSUNG_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" - depends on PM && CRC32 + depends on PM + select CRC32 help Enable the PM code's memory area checksum over sleep. This option will generate CRCs of all blocks of memory, and store them before diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index aa9511b6914..a30df396ca3 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -97,7 +97,9 @@ void __init s3c24xx_init_clocks(int xtal) #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) static int nr_uarts __initdata = 0; +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; +#endif /* s3c24xx_init_uartdevs * @@ -112,6 +114,7 @@ void __init s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no) { +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS struct platform_device *platdev; struct s3c2410_uartcfg *cfgptr = uart_cfgs; struct s3c24xx_uart_resources *resp; @@ -134,6 +137,7 @@ void __init s3c24xx_init_uartdevs(char *name, } nr_uarts = no; +#endif } void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c index ae00218b5da..02517a8206b 100644 --- a/drivers/clk/ti/clk-44xx.c +++ b/drivers/clk/ti/clk-44xx.c @@ -222,7 +222,6 @@ static struct ti_dt_clk omap44xx_clks[] = { DT_CLK(NULL, "auxclk5_src_ck", "auxclk5_src_ck"), DT_CLK(NULL, "auxclk5_ck", "auxclk5_ck"), DT_CLK(NULL, "auxclkreq5_ck", "auxclkreq5_ck"), - DT_CLK("50000000.gpmc", "fck", "dummy_ck"), DT_CLK("omap_i2c.1", "ick", "dummy_ck"), DT_CLK("omap_i2c.2", "ick", "dummy_ck"), DT_CLK("omap_i2c.3", "ick", "dummy_ck"), diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 0ef9f581286..08f3d1b915b 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -182,7 +182,6 @@ static struct ti_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"), DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"), DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"), - DT_CLK(NULL, "gpmc_ck", "dummy_ck"), DT_CLK("omap_i2c.1", "ick", "dummy_ck"), DT_CLK("omap_i2c.2", "ick", "dummy_ck"), DT_CLK("omap_i2c.3", "ick", "dummy_ck"), diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index 9977653f2d6..f7e40734c81 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -262,7 +262,6 @@ static struct ti_dt_clk dra7xx_clks[] = { DT_CLK(NULL, "vip1_gclk_mux", "vip1_gclk_mux"), DT_CLK(NULL, "vip2_gclk_mux", "vip2_gclk_mux"), DT_CLK(NULL, "vip3_gclk_mux", "vip3_gclk_mux"), - DT_CLK(NULL, "gpmc_ck", "dummy_ck"), DT_CLK("omap_i2c.1", "ick", "dummy_ck"), DT_CLK("omap_i2c.2", "ick", "dummy_ck"), DT_CLK("omap_i2c.3", "ick", "dummy_ck"), diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 531769b2433..63922b9ba6b 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -661,9 +661,9 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) /* * Ensure that stores to Normal memory are visible to the - * other CPUs before issuing the IPI. + * other CPUs before they observe us issuing the IPI. */ - dsb(); + dmb(ishst); /* this always happens on GIC0 */ writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 49444203328..f2b40511616 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -219,7 +219,7 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) return __raw_readl(dev->mmio_base + reg); } -#ifdef CONFIG_ARCH_PXA +#if IS_ENABLED(CONFIG_PXA_SSP) struct ssp_device *pxa_ssp_request(int port, const char *label); void pxa_ssp_free(struct ssp_device *); struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node, |