diff options
| -rw-r--r-- | Documentation/sound/alsa/HD-Audio-Models.txt | 1 | ||||
| -rw-r--r-- | sound/pci/hda/alc260_quirks.c | 129 | ||||
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 1 |
3 files changed, 1 insertions, 130 deletions
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 870cb1a2247..e63d5e2ed47 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -30,7 +30,6 @@ ALC880 ALC260 ====== fujitsu Fujitsu S7020 - favorit100 Maxdata Favorit 100XS basic fixed pin assignment (old default model) test for testing/debugging purpose, almost all controls can adjusted. Appearing only when compiled with diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c index 55da43dddf3..94e7a270c5a 100644 --- a/sound/pci/hda/alc260_quirks.c +++ b/sound/pci/hda/alc260_quirks.c @@ -8,7 +8,6 @@ enum { ALC260_AUTO, ALC260_BASIC, ALC260_FUJITSU_S702X, - ALC260_FAVORIT100, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -103,25 +102,6 @@ static const struct hda_input_mux alc260_acer_capture_sources[2] = { }, }; -/* Maxdata Favorit 100XS */ -static const struct hda_input_mux alc260_favorit100_capture_sources[2] = { - { - .num_items = 2, - .items = { - { "Line/Mic", 0x0 }, - { "CD", 0x4 }, - }, - }, - { - .num_items = 3, - .items = { - { "Line/Mic", 0x0 }, - { "CD", 0x4 }, - { "Mixer", 0x5 }, - }, - }, -}; - /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -179,18 +159,6 @@ static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = { { } /* end */ }; -/* Maxdata Favorit 100XS: one output and one input (0x12) jack - */ -static const struct snd_kcontrol_new alc260_favorit100_mixer[] = { - HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), - ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), - { } /* end */ -}; - /* * initialization verbs */ @@ -340,89 +308,6 @@ static const struct hda_verb alc260_fujitsu_init_verbs[] = { { } }; -/* Initialisation sequence for Maxdata Favorit 100XS - * (adapted from Acer init verbs). - */ -static const struct hda_verb alc260_favorit100_init_verbs[] = { - /* GPIO 0 enables the output jack. - * Turn this on and rely on the standard mute - * methods whenever the user wants to turn these outputs off. - */ - {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, - /* Line/Mic input jack is connected to Mic1 pin */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, - /* Ensure all other unused pins are disabled and muted. */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum - * bus when acting as outputs. - */ - {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute Line-out pin widget amp left and right - * (no equiv mixer ctrl) - */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Mic1 and Line1 pin widget input buffers since they start as - * inputs. If the pin mode is changed by the user the pin mode control - * will take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. - */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - mic - * (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do similar with the second ADC: mute capture input amp and - * set ADC connection to mic to match ALSA's default state. - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; - static const struct hda_verb alc260_hp_dc7600_verbs[] = { {0x05, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, @@ -631,7 +516,6 @@ static const struct hda_verb alc260_test_init_verbs[] = { static const char * const alc260_models[ALC260_MODEL_LAST] = { [ALC260_BASIC] = "basic", [ALC260_FUJITSU_S702X] = "fujitsu", - [ALC260_FAVORIT100] = "favorit100", #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = "test", #endif @@ -639,7 +523,6 @@ static const char * const alc260_models[ALC260_MODEL_LAST] = { }; static const struct snd_pci_quirk alc260_cfg_tbl[] = { - SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), @@ -673,18 +556,6 @@ static const struct alc_config_preset alc260_presets[] = { .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources), .input_mux = alc260_fujitsu_capture_sources, }, - [ALC260_FAVORIT100] = { - .mixers = { alc260_favorit100_mixer }, - .init_verbs = { alc260_favorit100_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), - .input_mux = alc260_favorit100_capture_sources, - }, #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = { .mixers = { alc260_test_mixer }, diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index db1d8c888da..0d81eeb563c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4300,6 +4300,7 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_FIXUP_GPIO1), SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750), SND_PCI_QUIRK(0x103c, 0x30ba, "HP Presario B1900", ALC260_FIXUP_HP_B1900), + SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FIXUP_GPIO1), SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER), SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF), {} |