diff options
| -rw-r--r-- | drivers/dma/amba-pl08x.c | 136 | ||||
| -rw-r--r-- | include/linux/amba/pl08x.h | 141 |
2 files changed, 138 insertions, 139 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index cc08c8c01a9..94949909e4e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -90,6 +90,7 @@ #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; +struct pl08x_driver_data; /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives @@ -119,6 +120,141 @@ struct pl08x_lli { }; /** + * struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; +}; + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @signal: the physical signal (aka channel) serving this physical channel + * right now + * @serving: the virtual channel currently being served by this physical + * channel + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + spinlock_t lock; + int signal; + struct pl08x_dma_chan *serving; +}; + +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @tx: async tx descriptor + * @node: node for txd list for channels + * @dsg_list: list of children sg's + * @direction: direction of transfer + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd + */ +struct pl08x_txd { + struct dma_async_tx_descriptor tx; + struct list_head node; + struct list_head dsg_list; + enum dma_transfer_direction direction; + dma_addr_t llis_bus; + struct pl08x_lli *llis_va; + /* Default cctl value for LLIs */ + u32 cctl; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @chan: wrappped abstract channel + * @phychan: the physical channel utilized by this channel, if there is one + * @phychan_hold: if non-zero, hold on to the physical channel even if we + * have no pending entries + * @tasklet: tasklet scheduled by the IRQ to handle actual work etc + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @runtime_direction: current direction of this channel according to + * runtime config + * @pend_list: queued transactions pending on this channel + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. + * @waiting: a TX descriptor on this channel which is waiting for a physical + * channel to become available + */ +struct pl08x_dma_chan { + struct dma_chan chan; + struct pl08x_phy_chan *phychan; + int phychan_hold; + struct tasklet_struct tasklet; + char *name; + const struct pl08x_channel_data *cd; + dma_addr_t src_addr; + dma_addr_t dst_addr; + u32 src_cctl; + u32 dst_cctl; + enum dma_transfer_direction runtime_direction; + struct list_head pend_list; + struct pl08x_txd *at; + spinlock_t lock; + struct pl08x_driver_data *host; + enum pl08x_dma_chan_state state; + bool slave; + bool device_fc; + struct pl08x_txd *waiting; +}; + +/** * struct pl08x_driver_data - the local state holder for the PL08x * @slave: slave engine for this instance * @memcpy: memcpy engine for this instance diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 88765a62c8f..48d02bf66ec 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -21,8 +21,9 @@ #include <linux/dmaengine.h> #include <linux/interrupt.h> -struct pl08x_lli; struct pl08x_driver_data; +struct pl08x_phy_chan; +struct pl08x_txd; /* Bitmasks for selecting AHB ports for DMA transfers */ enum { @@ -68,144 +69,6 @@ struct pl08x_channel_data { }; /** - * Struct pl08x_bus_data - information of source or destination - * busses for a transfer - * @addr: current address - * @maxwidth: the maximum width of a transfer on this bus - * @buswidth: the width of this bus in bytes: 1, 2 or 4 - */ -struct pl08x_bus_data { - dma_addr_t addr; - u8 maxwidth; - u8 buswidth; -}; - -/** - * struct pl08x_phy_chan - holder for the physical channels - * @id: physical index to this channel - * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this physical channel - * right now - * @serving: the virtual channel currently being served by this physical - * channel - * @locked: channel unavailable for the system, e.g. dedicated to secure - * world - */ -struct pl08x_phy_chan { - unsigned int id; - void __iomem *base; - spinlock_t lock; - int signal; - struct pl08x_dma_chan *serving; - bool locked; -}; - -/** - * struct pl08x_sg - structure containing data per sg - * @src_addr: src address of sg - * @dst_addr: dst address of sg - * @len: transfer len in bytes - * @node: node for txd's dsg_list - */ -struct pl08x_sg { - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; - struct list_head node; -}; - -/** - * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor - * @tx: async tx descriptor - * @node: node for txd list for channels - * @dsg_list: list of children sg's - * @direction: direction of transfer - * @llis_bus: DMA memory address (physical) start for the LLIs - * @llis_va: virtual memory address start for the LLIs - * @cctl: control reg values for current txd - * @ccfg: config reg values for current txd - */ -struct pl08x_txd { - struct dma_async_tx_descriptor tx; - struct list_head node; - struct list_head dsg_list; - enum dma_transfer_direction direction; - dma_addr_t llis_bus; - struct pl08x_lli *llis_va; - /* Default cctl value for LLIs */ - u32 cctl; - /* - * Settings to be put into the physical channel when we - * trigger this txd. Other registers are in llis_va[0]. - */ - u32 ccfg; -}; - -/** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel - * states - * @PL08X_CHAN_IDLE: the channel is idle - * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport - * channel and is running a transfer on it - * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport - * channel, but the transfer is currently paused - * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport - * channel to become available (only pertains to memcpy channels) - */ -enum pl08x_dma_chan_state { - PL08X_CHAN_IDLE, - PL08X_CHAN_RUNNING, - PL08X_CHAN_PAUSED, - PL08X_CHAN_WAITING, -}; - -/** - * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel - * @chan: wrappped abstract channel - * @phychan: the physical channel utilized by this channel, if there is one - * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries - * @tasklet: tasklet scheduled by the IRQ to handle actual work etc - * @name: name of channel - * @cd: channel platform data - * @runtime_addr: address for RX/TX according to the runtime config - * @runtime_direction: current direction of this channel according to - * runtime config - * @pend_list: queued transactions pending on this channel - * @at: active transaction on this channel - * @lock: a lock for this channel data - * @host: a pointer to the host (internal use) - * @state: whether the channel is idle, paused, running etc - * @slave: whether this channel is a device (slave) or for memcpy - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. - * @waiting: a TX descriptor on this channel which is waiting for a physical - * channel to become available - */ -struct pl08x_dma_chan { - struct dma_chan chan; - struct pl08x_phy_chan *phychan; - int phychan_hold; - struct tasklet_struct tasklet; - char *name; - const struct pl08x_channel_data *cd; - dma_addr_t src_addr; - dma_addr_t dst_addr; - u32 src_cctl; - u32 dst_cctl; - enum dma_transfer_direction runtime_direction; - struct list_head pend_list; - struct pl08x_txd *at; - spinlock_t lock; - struct pl08x_driver_data *host; - enum pl08x_dma_chan_state state; - bool slave; - bool device_fc; - struct pl08x_txd *waiting; -}; - -/** * struct pl08x_platform_data - the platform configuration for the PL08x * PrimeCells. * @slave_channels: the channels defined for the different devices on the |