diff options
21 files changed, 6644 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 9c2c285f35d..b2137e8f7ca 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -281,5 +281,6 @@ source "drivers/net/wireless/ti/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" source "drivers/net/wireless/mwifiex/Kconfig" source "drivers/net/wireless/cw1200/Kconfig" +source "drivers/net/wireless/rsi/Kconfig" endif # WLAN diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 0fab227025b..0c889168671 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -59,3 +59,4 @@ obj-$(CONFIG_BRCMFMAC) += brcm80211/ obj-$(CONFIG_BRCMSMAC) += brcm80211/ obj-$(CONFIG_CW1200) += cw1200/ +obj-$(CONFIG_RSI_91X) += rsi/ diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig new file mode 100644 index 00000000000..35245f994c1 --- /dev/null +++ b/drivers/net/wireless/rsi/Kconfig @@ -0,0 +1,30 @@ +config RSI_91X + tristate "Redpine Signals Inc 91x WLAN driver support" + depends on MAC80211 + ---help--- + This option enabes support for RSI 1x1 devices. + Select M (recommended), if you have a RSI 1x1 wireless module. + +config RSI_DEBUGFS + bool "Redpine Signals Inc debug support" + depends on RSI_91X + default y + ---help--- + Say Y, if you would like to enable debug support. This option + creates debugfs entries + +config RSI_SDIO + tristate "Redpine Signals SDIO bus support" + depends on MMC && RSI_91X + default m + ---help--- + This option enables the SDIO bus support in rsi drivers. + Select M (recommended), if you have a RSI 1x1 wireless module. + +config RSI_USB + tristate "Redpine Signals USB bus support" + depends on USB && RSI_91X + default m + ---help--- + This option enables the USB bus support in rsi drivers. + Select M (recommended), if you have a RSI 1x1 wireless module. diff --git a/drivers/net/wireless/rsi/Makefile b/drivers/net/wireless/rsi/Makefile new file mode 100644 index 00000000000..25828b69275 --- /dev/null +++ b/drivers/net/wireless/rsi/Makefile @@ -0,0 +1,12 @@ +rsi_91x-y += rsi_91x_main.o +rsi_91x-y += rsi_91x_core.o +rsi_91x-y += rsi_91x_mac80211.o +rsi_91x-y += rsi_91x_mgmt.o +rsi_91x-y += rsi_91x_pkt.o +rsi_91x-$(CONFIG_RSI_DEBUGFS) += rsi_91x_debugfs.o + +rsi_usb-y += rsi_91x_usb.o rsi_91x_usb_ops.o +rsi_sdio-y += rsi_91x_sdio.o rsi_91x_sdio_ops.o +obj-$(CONFIG_RSI_91X) += rsi_91x.o +obj-$(CONFIG_RSI_SDIO) += rsi_sdio.o +obj-$(CONFIG_RSI_USB) += rsi_usb.o diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c new file mode 100644 index 00000000000..e89535e86ca --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_core.c @@ -0,0 +1,342 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "rsi_mgmt.h" +#include "rsi_common.h" + +/** + * rsi_determine_min_weight_queue() - This function determines the queue with + * the min weight. + * @common: Pointer to the driver private structure. + * + * Return: q_num: Corresponding queue number. + */ +static u8 rsi_determine_min_weight_queue(struct rsi_common *common) +{ + struct wmm_qinfo *tx_qinfo = common->tx_qinfo; + u32 q_len = 0; + u8 ii = 0; + + for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) { + q_len = skb_queue_len(&common->tx_queue[ii]); + if ((tx_qinfo[ii].pkt_contended) && q_len) { + common->min_weight = tx_qinfo[ii].weight; + break; + } + } + return ii; +} + +/** + * rsi_recalculate_weights() - This function recalculates the weights + * corresponding to each queue. + * @common: Pointer to the driver private structure. + * + * Return: recontend_queue bool variable + */ +static bool rsi_recalculate_weights(struct rsi_common *common) +{ + struct wmm_qinfo *tx_qinfo = common->tx_qinfo; + bool recontend_queue = false; + u8 ii = 0; + u32 q_len = 0; + + for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) { + q_len = skb_queue_len(&common->tx_queue[ii]); + /* Check for the need of contention */ + if (q_len) { + if (tx_qinfo[ii].pkt_contended) { + tx_qinfo[ii].weight = + ((tx_qinfo[ii].weight > common->min_weight) ? + tx_qinfo[ii].weight - common->min_weight : 0); + } else { + tx_qinfo[ii].pkt_contended = 1; + tx_qinfo[ii].weight = tx_qinfo[ii].wme_params; + recontend_queue = true; + } + } else { /* No packets so no contention */ + tx_qinfo[ii].weight = 0; + tx_qinfo[ii].pkt_contended = 0; + } + } + + return recontend_queue; +} + +/** + * rsi_core_determine_hal_queue() - This function determines the queue from + * which packet has to be dequeued. + * @common: Pointer to the driver private structure. + * + * Return: q_num: Corresponding queue number on success. + */ +static u8 rsi_core_determine_hal_queue(struct rsi_common *common) +{ + bool recontend_queue = false; + u32 q_len = 0; + u8 q_num = INVALID_QUEUE; + u8 ii, min = 0; + + if (skb_queue_len(&common->tx_queue[MGMT_SOFT_Q])) { + if (!common->mgmt_q_block) + q_num = MGMT_SOFT_Q; + return q_num; + } + + if (common->pkt_cnt != 0) { + --common->pkt_cnt; + return common->selected_qnum; + } + +get_queue_num: + q_num = 0; + recontend_queue = false; + + q_num = rsi_determine_min_weight_queue(common); + q_len = skb_queue_len(&common->tx_queue[ii]); + ii = q_num; + + /* Selecting the queue with least back off */ + for (; ii < NUM_EDCA_QUEUES; ii++) { + if (((common->tx_qinfo[ii].pkt_contended) && + (common->tx_qinfo[ii].weight < min)) && q_len) { + min = common->tx_qinfo[ii].weight; + q_num = ii; + } + } + + common->tx_qinfo[q_num].pkt_contended = 0; + /* Adjust the back off values for all queues again */ + recontend_queue = rsi_recalculate_weights(common); + + q_len = skb_queue_len(&common->tx_queue[q_num]); + if (!q_len) { + /* If any queues are freshly contended and the selected queue + * doesn't have any packets + * then get the queue number again with fresh values + */ + if (recontend_queue) + goto get_queue_num; + + q_num = INVALID_QUEUE; + return q_num; + } + + common->selected_qnum = q_num; + q_len = skb_queue_len(&common->tx_queue[q_num]); + + switch (common->selected_qnum) { + case VO_Q: + if (q_len > MAX_CONTINUOUS_VO_PKTS) + common->pkt_cnt = (MAX_CONTINUOUS_VO_PKTS - 1); + else + common->pkt_cnt = --q_len; + break; + + case VI_Q: + if (q_len > MAX_CONTINUOUS_VI_PKTS) + common->pkt_cnt = (MAX_CONTINUOUS_VI_PKTS - 1); + else + common->pkt_cnt = --q_len; + + break; + + default: + common->pkt_cnt = 0; + break; + } + + return q_num; +} + +/** + * rsi_core_queue_pkt() - This functions enqueues the packet to the queue + * specified by the queue number. + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: None. + */ +static void rsi_core_queue_pkt(struct rsi_common *common, + struct sk_buff *skb) +{ + u8 q_num = skb->priority; + if (q_num >= NUM_SOFT_QUEUES) { + rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n", + __func__, q_num); + dev_kfree_skb(skb); + return; + } + + skb_queue_tail(&common->tx_queue[q_num], skb); +} + +/** + * rsi_core_dequeue_pkt() - This functions dequeues the packet from the queue + * specified by the queue number. + * @common: Pointer to the driver private structure. + * @q_num: Queue number. + * + * Return: Pointer to sk_buff structure. + */ +static struct sk_buff *rsi_core_dequeue_pkt(struct rsi_common *common, + u8 q_num) +{ + if (q_num >= NUM_SOFT_QUEUES) { + rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n", + __func__, q_num); + return NULL; + } + + return skb_dequeue(&common->tx_queue[q_num]); +} + +/** + * rsi_core_qos_processor() - This function is used to determine the wmm queue + * based on the backoff procedure. Data packets are + * dequeued from the selected hal queue and sent to + * the below layers. + * @common: Pointer to the driver private structure. + * + * Return: None. + */ +void rsi_core_qos_processor(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + struct sk_buff *skb; + unsigned long tstamp_1, tstamp_2; + u8 q_num; + int status; + + tstamp_1 = jiffies; + while (1) { + q_num = rsi_core_determine_hal_queue(common); + rsi_dbg(DATA_TX_ZONE, + "%s: Queue number = %d\n", __func__, q_num); + + if (q_num == INVALID_QUEUE) { + rsi_dbg(DATA_TX_ZONE, "%s: No More Pkt\n", __func__); + break; + } + + mutex_lock(&common->tx_rxlock); + + status = adapter->check_hw_queue_status(adapter, q_num); + if ((status <= 0)) { + mutex_unlock(&common->tx_rxlock); + break; + } + + if ((q_num < MGMT_SOFT_Q) && + ((skb_queue_len(&common->tx_queue[q_num])) <= + MIN_DATA_QUEUE_WATER_MARK)) { + if (ieee80211_queue_stopped(adapter->hw, WME_AC(q_num))) + ieee80211_wake_queue(adapter->hw, + WME_AC(q_num)); + } + + skb = rsi_core_dequeue_pkt(common, q_num); + if (skb == NULL) { + mutex_unlock(&common->tx_rxlock); + break; + } + + if (q_num == MGMT_SOFT_Q) + status = rsi_send_mgmt_pkt(common, skb); + else + status = rsi_send_data_pkt(common, skb); + + if (status) { + mutex_unlock(&common->tx_rxlock); + break; + } + + common->tx_stats.total_tx_pkt_send[q_num]++; + + tstamp_2 = jiffies; + mutex_unlock(&common->tx_rxlock); + + if (tstamp_2 > tstamp_1 + (300 * HZ / 1000)) + schedule(); + } +} + +/** + * rsi_core_xmit() - This function transmits the packets received from mac80211 + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: None. + */ +void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb) +{ + struct rsi_hw *adapter = common->priv; + struct ieee80211_tx_info *info; + struct skb_info *tx_params; + struct ieee80211_hdr *tmp_hdr = NULL; + u8 q_num, tid = 0; + + if ((!skb) || (!skb->len)) { + rsi_dbg(ERR_ZONE, "%s: Null skb/zero Length packet\n", + __func__); + goto xmit_fail; + } + info = IEEE80211_SKB_CB(skb); + tx_params = (struct skb_info *)info->driver_data; + tmp_hdr = (struct ieee80211_hdr *)&skb->data[0]; + + if (common->fsm_state != FSM_MAC_INIT_DONE) { + rsi_dbg(ERR_ZONE, "%s: FSM state not open\n", __func__); + goto xmit_fail; + } + + if ((ieee80211_is_mgmt(tmp_hdr->frame_control)) || + (ieee80211_is_ctl(tmp_hdr->frame_control))) { + q_num = MGMT_SOFT_Q; + skb->priority = q_num; + } else { + if (ieee80211_is_data_qos(tmp_hdr->frame_control)) { + tid = (skb->data[24] & IEEE80211_QOS_TID); + skb->priority = TID_TO_WME_AC(tid); + } else { + tid = IEEE80211_NONQOS_TID; + skb->priority = BE_Q; + } + q_num = skb->priority; + tx_params->tid = tid; + tx_params->sta_id = 0; + } + + if ((q_num != MGMT_SOFT_Q) && + ((skb_queue_len(&common->tx_queue[q_num]) + 1) >= + DATA_QUEUE_WATER_MARK)) { + if (!ieee80211_queue_stopped(adapter->hw, WME_AC(q_num))) + ieee80211_stop_queue(adapter->hw, WME_AC(q_num)); + rsi_set_event(&common->tx_thread.event); + goto xmit_fail; + } + + rsi_core_queue_pkt(common, skb); + rsi_dbg(DATA_TX_ZONE, "%s: ===> Scheduling TX thead <===\n", __func__); + rsi_set_event(&common->tx_thread.event); + + return; + +xmit_fail: + rsi_dbg(ERR_ZONE, "%s: Failed to queue packet\n", __func__); + /* Dropping pkt here */ + ieee80211_free_txskb(common->priv->hw, skb); +} diff --git a/drivers/net/wireless/rsi/rsi_91x_debugfs.c b/drivers/net/wireless/rsi/rsi_91x_debugfs.c new file mode 100644 index 00000000000..7e4ef455441 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_debugfs.c @@ -0,0 +1,339 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "rsi_debugfs.h" +#include "rsi_sdio.h" + +/** + * rsi_sdio_stats_read() - This function returns the sdio status of the driver. + * @seq: Pointer to the sequence file structure. + * @data: Pointer to the data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_sdio_stats_read(struct seq_file *seq, void *data) +{ + struct rsi_common *common = seq->private; + struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + + seq_printf(seq, "total_sdio_interrupts: %d\n", + dev->rx_info.sdio_int_counter); + seq_printf(seq, "sdio_msdu_pending_intr_count: %d\n", + dev->rx_info.total_sdio_msdu_pending_intr); + seq_printf(seq, "sdio_buff_full_count : %d\n", + dev->rx_info.buf_full_counter); + seq_printf(seq, "sdio_buf_semi_full_count %d\n", + dev->rx_info.buf_semi_full_counter); + seq_printf(seq, "sdio_unknown_intr_count: %d\n", + dev->rx_info.total_sdio_unknown_intr); + /* RX Path Stats */ + seq_printf(seq, "BUFFER FULL STATUS : %d\n", + dev->rx_info.buffer_full); + seq_printf(seq, "SEMI BUFFER FULL STATUS : %d\n", + dev->rx_info.semi_buffer_full); + seq_printf(seq, "MGMT BUFFER FULL STATUS : %d\n", + dev->rx_info.mgmt_buffer_full); + seq_printf(seq, "BUFFER FULL COUNTER : %d\n", + dev->rx_info.buf_full_counter); + seq_printf(seq, "BUFFER SEMI FULL COUNTER : %d\n", + dev->rx_info.buf_semi_full_counter); + seq_printf(seq, "MGMT BUFFER FULL COUNTER : %d\n", + dev->rx_info.mgmt_buf_full_counter); + + return 0; +} + +/** + * rsi_sdio_stats_open() - This funtion calls single open function of seq_file + * to open file and read contents from it. + * @inode: Pointer to the inode structure. + * @file: Pointer to the file structure. + * + * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure. + */ +static int rsi_sdio_stats_open(struct inode *inode, + struct file *file) +{ + return single_open(file, rsi_sdio_stats_read, inode->i_private); +} + +/** + * rsi_version_read() - This function gives driver and firmware version number. + * @seq: Pointer to the sequence file structure. + * @data: Pointer to the data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_version_read(struct seq_file *seq, void *data) +{ + struct rsi_common *common = seq->private; + + common->driver_ver.major = 0; + common->driver_ver.minor = 1; + common->driver_ver.release_num = 0; + common->driver_ver.patch_num = 0; + seq_printf(seq, "Driver : %x.%d.%d.%d\nLMAC : %d.%d.%d.%d\n", + common->driver_ver.major, + common->driver_ver.minor, + common->driver_ver.release_num, + common->driver_ver.patch_num, + common->fw_ver.major, + common->fw_ver.minor, + common->fw_ver.release_num, + common->fw_ver.patch_num); + return 0; +} + +/** + * rsi_version_open() - This funtion calls single open function of seq_file to + * open file and read contents from it. + * @inode: Pointer to the inode structure. + * @file: Pointer to the file structure. + * + * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure. + */ +static int rsi_version_open(struct inode *inode, + struct file *file) +{ + return single_open(file, rsi_version_read, inode->i_private); +} + +/** + * rsi_stats_read() - This function return the status of the driver. + * @seq: Pointer to the sequence file structure. + * @data: Pointer to the data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_stats_read(struct seq_file *seq, void *data) +{ + struct rsi_common *common = seq->private; + + unsigned char fsm_state[][32] = { + "FSM_CARD_NOT_READY", + "FSM_BOOT_PARAMS_SENT", + "FSM_EEPROM_READ_MAC_ADDR", + "FSM_RESET_MAC_SENT", + "FSM_RADIO_CAPS_SENT", + "FSM_BB_RF_PROG_SENT", + "FSM_MAC_INIT_DONE" + }; + seq_puts(seq, "==> RSI STA DRIVER STATUS <==\n"); + seq_puts(seq, "DRIVER_FSM_STATE: "); + + if (common->fsm_state <= FSM_MAC_INIT_DONE) + seq_printf(seq, "%s", fsm_state[common->fsm_state]); + + seq_printf(seq, "(%d)\n\n", common->fsm_state); + + /* Mgmt TX Path Stats */ + seq_printf(seq, "total_mgmt_pkt_send : %d\n", + common->tx_stats.total_tx_pkt_send[MGMT_SOFT_Q]); + seq_printf(seq, "total_mgmt_pkt_queued : %d\n", + skb_queue_len(&common->tx_queue[4])); + seq_printf(seq, "total_mgmt_pkt_freed : %d\n", + common->tx_stats.total_tx_pkt_freed[MGMT_SOFT_Q]); + + /* Data TX Path Stats */ + seq_printf(seq, "total_data_vo_pkt_send: %8d\t", + common->tx_stats.total_tx_pkt_send[VO_Q]); + seq_printf(seq, "total_data_vo_pkt_queued: %8d\t", + skb_queue_len(&common->tx_queue[0])); + seq_printf(seq, "total_vo_pkt_freed: %8d\n", + common->tx_stats.total_tx_pkt_freed[VO_Q]); + seq_printf(seq, "total_data_vi_pkt_send: %8d\t", + common->tx_stats.total_tx_pkt_send[VI_Q]); + seq_printf(seq, "total_data_vi_pkt_queued: %8d\t", + skb_queue_len(&common->tx_queue[1])); + seq_printf(seq, "total_vi_pkt_freed: %8d\n", + common->tx_stats.total_tx_pkt_freed[VI_Q]); + seq_printf(seq, "total_data_be_pkt_send: %8d\t", + common->tx_stats.total_tx_pkt_send[BE_Q]); + seq_printf(seq, "total_data_be_pkt_queued: %8d\t", + skb_queue_len(&common->tx_queue[2])); + seq_printf(seq, "total_be_pkt_freed: %8d\n", + common->tx_stats.total_tx_pkt_freed[BE_Q]); + seq_printf(seq, "total_data_bk_pkt_send: %8d\t", + common->tx_stats.total_tx_pkt_send[BK_Q]); + seq_printf(seq, "total_data_bk_pkt_queued: %8d\t", + skb_queue_len(&common->tx_queue[3])); + seq_printf(seq, "total_bk_pkt_freed: %8d\n", + common->tx_stats.total_tx_pkt_freed[BK_Q]); + + seq_puts(seq, "\n"); + return 0; +} + +/** + * rsi_stats_open() - This funtion calls single open function of seq_file to + * open file and read contents from it. + * @inode: Pointer to the inode structure. + * @file: Pointer to the file structure. + * + * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure. + */ +static int rsi_stats_open(struct inode *inode, + struct file *file) +{ + return single_open(file, rsi_stats_read, inode->i_private); +} + +/** + * rsi_debug_zone_read() - This function display the currently enabled debug zones. + * @seq: Pointer to the sequence file structure. + * @data: Pointer to the data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_debug_zone_read(struct seq_file *seq, void *data) +{ + rsi_dbg(FSM_ZONE, "%x: rsi_enabled zone", rsi_zone_enabled); + seq_printf(seq, "The zones available are %#x\n", + rsi_zone_enabled); + return 0; +} + +/** + * rsi_debug_read() - This funtion calls single open function of seq_file to + * open file and read contents from it. + * @inode: Pointer to the inode structure. + * @file: Pointer to the file structure. + * + * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure. + */ +static int rsi_debug_read(struct inode *inode, + struct file *file) +{ + return single_open(file, rsi_debug_zone_read, inode->i_private); +} + +/** + * rsi_debug_zone_write() - This function writes into hal queues as per user + * requirement. + * @filp: Pointer to the file structure. + * @buff: Pointer to the character buffer. + * @len: Length of the data to be written into buffer. + * @data: Pointer to the data. + * + * Return: len: Number of bytes read. + */ +static ssize_t rsi_debug_zone_write(struct file *filp, + const char __user *buff, + size_t len, + loff_t *data) +{ + unsigned long dbg_zone; + int ret; + + if (!len) + return 0; + + ret = kstrtoul_from_user(buff, len, 16, &dbg_zone); + + if (ret) + return ret; + + rsi_zone_enabled = dbg_zone; + return len; +} + +#define FOPS(fopen) { \ + .owner = THIS_MODULE, \ + .open = (fopen), \ + .read = seq_read, \ + .llseek = seq_lseek, \ +} + +#define FOPS_RW(fopen, fwrite) { \ + .owner = THIS_MODULE, \ + .open = (fopen), \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .write = (fwrite), \ +} + +static const struct rsi_dbg_files dev_debugfs_files[] = { + {"version", 0644, FOPS(rsi_version_open),}, + {"stats", 0644, FOPS(rsi_stats_open),}, + {"debug_zone", 0666, FOPS_RW(rsi_debug_read, rsi_debug_zone_write),}, + {"sdio_stats", 0644, FOPS(rsi_sdio_stats_open),}, +}; + +/** + * rsi_init_dbgfs() - This function initializes the dbgfs entry. + * @adapter: Pointer to the adapter structure. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_init_dbgfs(struct rsi_hw *adapter) +{ + struct rsi_common *common = adapter->priv; + struct rsi_debugfs *dev_dbgfs; + char devdir[6]; + int ii; + const struct rsi_dbg_files *files; + + dev_dbgfs = kzalloc(sizeof(*dev_dbgfs), GFP_KERNEL); + adapter->dfsentry = dev_dbgfs; + + snprintf(devdir, sizeof(devdir), "%s", + wiphy_name(adapter->hw->wiphy)); + dev_dbgfs->subdir = debugfs_create_dir(devdir, NULL); + + if (IS_ERR(dev_dbgfs->subdir)) { + if (dev_dbgfs->subdir == ERR_PTR(-ENODEV)) + rsi_dbg(ERR_ZONE, + "%s:Debugfs has not been mounted\n", __func__); + else + rsi_dbg(ERR_ZONE, "debugfs:%s not created\n", devdir); + + adapter->dfsentry = NULL; + kfree(dev_dbgfs); + return (int)PTR_ERR(dev_dbgfs->subdir); + } else { + for (ii = 0; ii < adapter->num_debugfs_entries; ii++) { + files = &dev_debugfs_files[ii]; + dev_dbgfs->rsi_files[ii] = + debugfs_create_file(files->name, + files->perms, + dev_dbgfs->subdir, + common, + &files->fops); + } + } + return 0; +} +EXPORT_SYMBOL_GPL(rsi_init_dbgfs); + +/** + * rsi_remove_dbgfs() - Removes the previously created dbgfs file entries + * in the reverse order of creation. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +void rsi_remove_dbgfs(struct rsi_hw *adapter) +{ + struct rsi_debugfs *dev_dbgfs = adapter->dfsentry; + + if (!dev_dbgfs) + return; + + debugfs_remove_recursive(dev_dbgfs->subdir); +} +EXPORT_SYMBOL_GPL(rsi_remove_dbgfs); diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c new file mode 100644 index 00000000000..84164747ace --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c @@ -0,0 +1,1008 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/etherdevice.h> +#include "rsi_debugfs.h" +#include "rsi_mgmt.h" +#include "rsi_common.h" + +static const struct ieee80211_channel rsi_2ghz_channels[] = { + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2412, + .hw_value = 1 }, /* Channel 1 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2417, + .hw_value = 2 }, /* Channel 2 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2422, + .hw_value = 3 }, /* Channel 3 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2427, + .hw_value = 4 }, /* Channel 4 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2432, + .hw_value = 5 }, /* Channel 5 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2437, + .hw_value = 6 }, /* Channel 6 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2442, + .hw_value = 7 }, /* Channel 7 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2447, + .hw_value = 8 }, /* Channel 8 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2452, + .hw_value = 9 }, /* Channel 9 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2457, + .hw_value = 10 }, /* Channel 10 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2462, + .hw_value = 11 }, /* Channel 11 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2467, + .hw_value = 12 }, /* Channel 12 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2472, + .hw_value = 13 }, /* Channel 13 */ + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2484, + .hw_value = 14 }, /* Channel 14 */ +}; + +static const struct ieee80211_channel rsi_5ghz_channels[] = { + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5180, + .hw_value = 36, }, /* Channel 36 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5200, + .hw_value = 40, }, /* Channel 40 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5220, + .hw_value = 44, }, /* Channel 44 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5240, + .hw_value = 48, }, /* Channel 48 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5260, + .hw_value = 52, }, /* Channel 52 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5280, + .hw_value = 56, }, /* Channel 56 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5300, + .hw_value = 60, }, /* Channel 60 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5320, + .hw_value = 64, }, /* Channel 64 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5500, + .hw_value = 100, }, /* Channel 100 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5520, + .hw_value = 104, }, /* Channel 104 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5540, + .hw_value = 108, }, /* Channel 108 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5560, + .hw_value = 112, }, /* Channel 112 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5580, + .hw_value = 116, }, /* Channel 116 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5600, + .hw_value = 120, }, /* Channel 120 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5620, + .hw_value = 124, }, /* Channel 124 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5640, + .hw_value = 128, }, /* Channel 128 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5660, + .hw_value = 132, }, /* Channel 132 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5680, + .hw_value = 136, }, /* Channel 136 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5700, + .hw_value = 140, }, /* Channel 140 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5745, + .hw_value = 149, }, /* Channel 149 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5765, + .hw_value = 153, }, /* Channel 153 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5785, + .hw_value = 157, }, /* Channel 157 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5805, + .hw_value = 161, }, /* Channel 161 */ + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5825, + .hw_value = 165, }, /* Channel 165 */ +}; + +struct ieee80211_rate rsi_rates[12] = { + { .bitrate = STD_RATE_01 * 5, .hw_value = RSI_RATE_1 }, + { .bitrate = STD_RATE_02 * 5, .hw_value = RSI_RATE_2 }, + { .bitrate = STD_RATE_5_5 * 5, .hw_value = RSI_RATE_5_5 }, + { .bitrate = STD_RATE_11 * 5, .hw_value = RSI_RATE_11 }, + { .bitrate = STD_RATE_06 * 5, .hw_value = RSI_RATE_6 }, + { .bitrate = STD_RATE_09 * 5, .hw_value = RSI_RATE_9 }, + { .bitrate = STD_RATE_12 * 5, .hw_value = RSI_RATE_12 }, + { .bitrate = STD_RATE_18 * 5, .hw_value = RSI_RATE_18 }, + { .bitrate = STD_RATE_24 * 5, .hw_value = RSI_RATE_24 }, + { .bitrate = STD_RATE_36 * 5, .hw_value = RSI_RATE_36 }, + { .bitrate = STD_RATE_48 * 5, .hw_value = RSI_RATE_48 }, + { .bitrate = STD_RATE_54 * 5, .hw_value = RSI_RATE_54 }, +}; + +const u16 rsi_mcsrates[8] = { + RSI_RATE_MCS0, RSI_RATE_MCS1, RSI_RATE_MCS2, RSI_RATE_MCS3, + RSI_RATE_MCS4, RSI_RATE_MCS5, RSI_RATE_MCS6, RSI_RATE_MCS7 +}; + +/** + * rsi_is_cipher_wep() - This function determines if the cipher is WEP or not. + * @common: Pointer to the driver private structure. + * + * Return: If cipher type is WEP, a value of 1 is returned, else 0. + */ + +bool rsi_is_cipher_wep(struct rsi_common *common) +{ + if (((common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP104) || + (common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP40)) && + (!common->secinfo.ptk_cipher)) + return true; + else + return false; +} + +/** + * rsi_register_rates_channels() - This function registers channels and rates. + * @adapter: Pointer to the adapter structure. + * @band: Operating band to be set. + * + * Return: None. + */ +static void rsi_register_rates_channels(struct rsi_hw *adapter, int band) +{ + struct ieee80211_supported_band *sbands = &adapter->sbands[band]; + void *channels = NULL; + + if (band == IEEE80211_BAND_2GHZ) { + channels = kmalloc(sizeof(rsi_2ghz_channels), GFP_KERNEL); + memcpy(channels, + rsi_2ghz_channels, + sizeof(rsi_2ghz_channels)); + sbands->band = IEEE80211_BAND_2GHZ; + sbands->n_channels = ARRAY_SIZE(rsi_2ghz_channels); + sbands->bitrates = rsi_rates; + sbands->n_bitrates = ARRAY_SIZE(rsi_rates); + } else { + channels = kmalloc(sizeof(rsi_5ghz_channels), GFP_KERNEL); + memcpy(channels, + rsi_5ghz_channels, + sizeof(rsi_5ghz_channels)); + sbands->band = IEEE80211_BAND_5GHZ; + sbands->n_channels = ARRAY_SIZE(rsi_5ghz_channels); + sbands->bitrates = &rsi_rates[4]; + sbands->n_bitrates = ARRAY_SIZE(rsi_rates) - 4; + } + + sbands->channels = channels; + + memset(&sbands->ht_cap, 0, sizeof(struct ieee80211_sta_ht_cap)); + sbands->ht_cap.ht_supported = true; + sbands->ht_cap.cap = (IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40); + sbands->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K; + sbands->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE; + sbands->ht_cap.mcs.rx_mask[0] = 0xff; + sbands->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + /* sbands->ht_cap.mcs.rx_highest = 0x82; */ +} + +/** + * rsi_mac80211_attach() - This function is used to de-initialize the + * Mac80211 stack. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +void rsi_mac80211_detach(struct rsi_hw *adapter) +{ + struct ieee80211_hw *hw = adapter->hw; + + if (hw) { + ieee80211_stop_queues(hw); + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + } + + rsi_remove_dbgfs(adapter); +} +EXPORT_SYMBOL_GPL(rsi_mac80211_detach); + +/** + * rsi_indicate_tx_status() - This function indicates the transmit status. + * @adapter: Pointer to the adapter structure. + * @skb: Pointer to the socket buffer structure. + * @status: Status + * + * Return: None. + */ +void rsi_indicate_tx_status(struct rsi_hw *adapter, + struct sk_buff *skb, + int status) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + memset(info->driver_data, 0, IEEE80211_TX_INFO_DRIVER_DATA_SIZE); + + if (!status) + info->flags |= IEEE80211_TX_STAT_ACK; + + ieee80211_tx_status_irqsafe(adapter->hw, skb); +} + +/** + * rsi_mac80211_tx() - This is the handler that 802.11 module calls for each + * transmitted frame.SKB contains the buffer starting + * from the IEEE 802.11 header. + * @hw: Pointer to the ieee80211_hw structure. + * @control: Pointer to the ieee80211_tx_control structure + * @skb: Pointer to the socket buffer structure. + * + * Return: None + */ +static void rsi_mac80211_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + rsi_core_xmit(common, skb); +} + +/** + * rsi_mac80211_start() - This is first handler that 802.11 module calls, since + * the driver init is complete by then, just + * returns success. + * @hw: Pointer to the ieee80211_hw structure. + * + * Return: 0 as success. + */ +static int rsi_mac80211_start(struct ieee80211_hw *hw) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + common->iface_down = false; + mutex_unlock(&common->mutex); + + return 0; +} + +/** + * rsi_mac80211_stop() - This is the last handler that 802.11 module calls. + * @hw: Pointer to the ieee80211_hw structure. + * + * Return: None. + */ +static void rsi_mac80211_stop(struct ieee80211_hw *hw) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + common->iface_down = true; + mutex_unlock(&common->mutex); +} + +/** + * rsi_mac80211_add_interface() - This function is called when a netdevice + * attached to the hardware is enabled. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * + * Return: ret: 0 on success, negative error code on failure. + */ +static int rsi_mac80211_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + int ret = -EOPNOTSUPP; + + mutex_lock(&common->mutex); + switch (vif->type) { + case NL80211_IFTYPE_STATION: + if (!adapter->sc_nvifs) { + ++adapter->sc_nvifs; + adapter->vifs[0] = vif; + ret = rsi_set_vap_capabilities(common, STA_OPMODE); + } + break; + default: + rsi_dbg(ERR_ZONE, + "%s: Interface type %d not supported\n", __func__, + vif->type); + } + mutex_unlock(&common->mutex); + + return ret; +} + +/** + * rsi_mac80211_remove_interface() - This function notifies driver that an + * interface is going down. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * + * Return: None. + */ +static void rsi_mac80211_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + if (vif->type == NL80211_IFTYPE_STATION) + adapter->sc_nvifs--; + + if (!memcmp(adapter->vifs[0], vif, sizeof(struct ieee80211_vif))) + adapter->vifs[0] = NULL; + mutex_unlock(&common->mutex); +} + +/** + * rsi_mac80211_config() - This function is a handler for configuration + * requests. The stack calls this function to + * change hardware configuration, e.g., channel. + * @hw: Pointer to the ieee80211_hw structure. + * @changed: Changed flags set. + * + * Return: 0 on success, negative error code on failure. + */ +static int rsi_mac80211_config(struct ieee80211_hw *hw, + u32 changed) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + int status = -EOPNOTSUPP; + + mutex_lock(&common->mutex); + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + struct ieee80211_channel *curchan = hw->conf.chandef.chan; + u16 channel = curchan->hw_value; + + rsi_dbg(INFO_ZONE, + "%s: Set channel: %d MHz type: %d channel_no %d\n", + __func__, curchan->center_freq, + curchan->flags, channel); + common->band = curchan->band; + status = rsi_set_channel(adapter->priv, channel); + } + mutex_unlock(&common->mutex); + + return status; +} + +/** + * rsi_get_connected_channel() - This function is used to get the current + * connected channel number. + * @adapter: Pointer to the adapter structure. + * + * Return: Current connected AP's channel number is returned. + */ +u16 rsi_get_connected_channel(struct rsi_hw *adapter) +{ + struct ieee80211_vif *vif = adapter->vifs[0]; + if (vif) { + struct ieee80211_bss_conf *bss = &vif->bss_conf; + struct ieee80211_channel *channel = bss->chandef.chan; + return channel->hw_value; + } + + return 0; +} + +/** + * rsi_mac80211_bss_info_changed() - This function is a handler for config + * requests related to BSS parameters that + * may vary during BSS's lifespan. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * @bss_conf: Pointer to the ieee80211_bss_conf structure. + * @changed: Changed flags set. + * + * Return: None. + */ +static void rsi_mac80211_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + if (changed & BSS_CHANGED_ASSOC) { + rsi_dbg(INFO_ZONE, "%s: Changed Association status: %d\n", + __func__, bss_conf->assoc); + rsi_inform_bss_status(common, + bss_conf->assoc, + bss_conf->bssid, + bss_conf->qos, + bss_conf->aid); + } + mutex_unlock(&common->mutex); +} + +/** + * rsi_mac80211_conf_filter() - This function configure the device's RX filter. + * @hw: Pointer to the ieee80211_hw structure. + * @changed: Changed flags set. + * @total_flags: Total initial flags set. + * @multicast: Multicast. + * + * Return: None. + */ +static void rsi_mac80211_conf_filter(struct ieee80211_hw *hw, + u32 changed_flags, + u32 *total_flags, + u64 multicast) +{ + /* Not doing much here as of now */ + *total_flags &= RSI_SUPP_FILTERS; +} + +/** + * rsi_mac80211_conf_tx() - This function configures TX queue parameters + * (EDCF (aifs, cw_min, cw_max), bursting) + * for a hardware TX queue. + * @hw: Pointer to the ieee80211_hw structure + * @vif: Pointer to the ieee80211_vif structure. + * @queue: Queue number. + * @params: Pointer to ieee80211_tx_queue_params structure. + * + * Return: 0 on success, negative error code on failure. + */ +static int rsi_mac80211_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + u8 idx = 0; + + if (queue >= IEEE80211_NUM_ACS) + return 0; + + rsi_dbg(INFO_ZONE, + "%s: Conf queue %d, aifs: %d, cwmin: %d cwmax: %d, txop: %d\n", + __func__, queue, params->aifs, + params->cw_min, params->cw_max, params->txop); + + mutex_lock(&common->mutex); + /* Map into the way the f/w expects */ + switch (queue) { + case IEEE80211_AC_VO: + idx = VO_Q; + break; + case IEEE80211_AC_VI: + idx = VI_Q; + break; + case IEEE80211_AC_BE: + idx = BE_Q; + break; + case IEEE80211_AC_BK: + idx = BK_Q; + break; + default: + idx = BE_Q; + break; + } + + memcpy(&common->edca_params[idx], + params, + sizeof(struct ieee80211_tx_queue_params)); + mutex_unlock(&common->mutex); + + return 0; +} + +/** + * rsi_hal_key_config() - This function loads the keys into the firmware. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * @key: Pointer to the ieee80211_key_conf structure. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_hal_key_config(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *key) +{ + struct rsi_hw *adapter = hw->priv; + int status; + u8 key_type; + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + key_type = RSI_PAIRWISE_KEY; + else + key_type = RSI_GROUP_KEY; + + rsi_dbg(ERR_ZONE, "%s: Cipher 0x%x key_type: %d key_len: %d\n", + __func__, key->cipher, key_type, key->keylen); + + if ((key->cipher == WLAN_CIPHER_SUITE_WEP104) || + (key->cipher == WLAN_CIPHER_SUITE_WEP40)) { + status = rsi_hal_load_key(adapter->priv, + key->key, + key->keylen, + RSI_PAIRWISE_KEY, + key->keyidx, + key->cipher); + if (status) + return status; + } + return rsi_hal_load_key(adapter->priv, + key->key, + key->keylen, + key_type, + key->keyidx, + key->cipher); +} + +/** + * rsi_mac80211_set_key() - This function sets type of key to be loaded. + * @hw: Pointer to the ieee80211_hw structure. + * @cmd: enum set_key_cmd. + * @vif: Pointer to the ieee80211_vif structure. + * @sta: Pointer to the ieee80211_sta structure. + * @key: Pointer to the ieee80211_key_conf structure. + * + * Return: status: 0 on success, negative error code on failure. + */ +static int rsi_mac80211_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + struct security_info *secinfo = &common->secinfo; + int status; + + mutex_lock(&common->mutex); + switch (cmd) { + case SET_KEY: + secinfo->security_enable = true; + status = rsi_hal_key_config(hw, vif, key); + if (status) { + mutex_unlock(&common->mutex); + return status; + } + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + secinfo->ptk_cipher = key->cipher; + else + secinfo->gtk_cipher = key->cipher; + + key->hw_key_idx = key->keyidx; + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + + rsi_dbg(ERR_ZONE, "%s: RSI set_key\n", __func__); + break; + + case DISABLE_KEY: + secinfo->security_enable = false; + rsi_dbg(ERR_ZONE, "%s: RSI del key\n", __func__); + memset(key, 0, sizeof(struct ieee80211_key_conf)); + status = rsi_hal_key_config(hw, vif, key); + break; + + default: + status = -EOPNOTSUPP; + break; + } + + mutex_unlock(&common->mutex); + return status; +} + +/** + * rsi_mac80211_ampdu_action() - This function selects the AMPDU action for + * the corresponding mlme_action flag and + * informs the f/w regarding this. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * @action: ieee80211_ampdu_mlme_action enum. + * @sta: Pointer to the ieee80211_sta structure. + * @tid: Traffic identifier. + * @ssn: Pointer to ssn value. + * @buf_size: Buffer size (for kernel version > 2.6.38). + * + * Return: status: 0 on success, negative error code on failure. + */ +static int rsi_mac80211_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, + unsigned short tid, + unsigned short *ssn, + unsigned char buf_size) +{ + int status = -EOPNOTSUPP; + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + u16 seq_no = 0; + u8 ii = 0; + + for (ii = 0; ii < RSI_MAX_VIFS; ii++) { + if (vif == adapter->vifs[ii]) + break; + } + + mutex_lock(&common->mutex); + rsi_dbg(INFO_ZONE, "%s: AMPDU action %d called\n", __func__, action); + if (ssn != NULL) + seq_no = *ssn; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + status = rsi_send_aggregation_params_frame(common, + tid, + seq_no, + buf_size, + STA_RX_ADDBA_DONE); + break; + + case IEEE80211_AMPDU_RX_STOP: + status = rsi_send_aggregation_params_frame(common, + tid, + 0, + buf_size, + STA_RX_DELBA); + break; + + case IEEE80211_AMPDU_TX_START: + common->vif_info[ii].seq_start = seq_no; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + status = rsi_send_aggregation_params_frame(common, + tid, + seq_no, + buf_size, + STA_TX_DELBA); + if (!status) + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + + case IEEE80211_AMPDU_TX_OPERATIONAL: + status = rsi_send_aggregation_params_frame(common, + tid, + common->vif_info[ii] + .seq_start, + buf_size, + STA_TX_ADDBA_DONE); + break; + + default: + rsi_dbg(ERR_ZONE, "%s: Uknown AMPDU action\n", __func__); + break; + } + + mutex_unlock(&common->mutex); + return status; +} + +/** + * rsi_mac80211_set_rts_threshold() - This function sets rts threshold value. + * @hw: Pointer to the ieee80211_hw structure. + * @value: Rts threshold value. + * + * Return: 0 on success. + */ +static int rsi_mac80211_set_rts_threshold(struct ieee80211_hw *hw, + u32 value) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + common->rts_threshold = value; + mutex_unlock(&common->mutex); + + return 0; +} + +/** + * rsi_mac80211_set_rate_mask() - This function sets bitrate_mask to be used. + * @hw: Pointer to the ieee80211_hw structure + * @vif: Pointer to the ieee80211_vif structure. + * @mask: Pointer to the cfg80211_bitrate_mask structure. + * + * Return: 0 on success. + */ +static int rsi_mac80211_set_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const struct cfg80211_bitrate_mask *mask) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + + common->fixedrate_mask[IEEE80211_BAND_2GHZ] = 0; + + if (mask->control[IEEE80211_BAND_2GHZ].legacy == 0xfff) { + common->fixedrate_mask[IEEE80211_BAND_2GHZ] = + (mask->control[IEEE80211_BAND_2GHZ].ht_mcs[0] << 12); + } else { + common->fixedrate_mask[IEEE80211_BAND_2GHZ] = + mask->control[IEEE80211_BAND_2GHZ].legacy; + } + mutex_unlock(&common->mutex); + + return 0; +} + +/** + * rsi_fill_rx_status() - This function fills rx status in + * ieee80211_rx_status structure. + * @hw: Pointer to the ieee80211_hw structure. + * @skb: Pointer to the socket buffer structure. + * @common: Pointer to the driver private structure. + * @rxs: Pointer to the ieee80211_rx_status structure. + * + * Return: None. + */ +static void rsi_fill_rx_status(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct rsi_common *common, + struct ieee80211_rx_status *rxs) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct skb_info *rx_params = (struct skb_info *)info->driver_data; + struct ieee80211_hdr *hdr; + char rssi = rx_params->rssi; + u8 hdrlen = 0; + u8 channel = rx_params->channel; + s32 freq; + + hdr = ((struct ieee80211_hdr *)(skb->data)); + hdrlen = ieee80211_hdrlen(hdr->frame_control); + + memset(info, 0, sizeof(struct ieee80211_tx_info)); + + rxs->signal = -(rssi); + + if (channel <= 14) + rxs->band = IEEE80211_BAND_2GHZ; + else + rxs->band = IEEE80211_BAND_5GHZ; + + freq = ieee80211_channel_to_frequency(channel, rxs->band); + + if (freq) + rxs->freq = freq; + + if (ieee80211_has_protected(hdr->frame_control)) { + if (rsi_is_cipher_wep(common)) { + memmove(skb->data + 4, skb->data, hdrlen); + skb_pull(skb, 4); + } else { + memmove(skb->data + 8, skb->data, hdrlen); + skb_pull(skb, 8); + rxs->flag |= RX_FLAG_MMIC_STRIPPED; + } + rxs->flag |= RX_FLAG_DECRYPTED; + rxs->flag |= RX_FLAG_IV_STRIPPED; + } +} + +/** + * rsi_indicate_pkt_to_os() - This function sends recieved packet to mac80211. + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: None. + */ +void rsi_indicate_pkt_to_os(struct rsi_common *common, + struct sk_buff *skb) +{ + struct rsi_hw *adapter = common->priv; + struct ieee80211_hw *hw = adapter->hw; + struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); + + if ((common->iface_down) || (!adapter->sc_nvifs)) { + dev_kfree_skb(skb); + return; + } + + /* filling in the ieee80211_rx_status flags */ + rsi_fill_rx_status(hw, skb, common, rx_status); + + ieee80211_rx_irqsafe(hw, skb); +} + +static void rsi_set_min_rate(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct rsi_common *common) +{ + u8 band = hw->conf.chandef.chan->band; + u8 ii; + u32 rate_bitmap; + bool matched = false; + + common->bitrate_mask[band] = sta->supp_rates[band]; + + rate_bitmap = (common->fixedrate_mask[band] & sta->supp_rates[band]); + + if (rate_bitmap & 0xfff) { + /* Find out the min rate */ + for (ii = 0; ii < ARRAY_SIZE(rsi_rates); ii++) { + if (rate_bitmap & BIT(ii)) { + common->min_rate = rsi_rates[ii].hw_value; + matched = true; + break; + } + } + } + + common->vif_info[0].is_ht = sta->ht_cap.ht_supported; + + if ((common->vif_info[0].is_ht) && (rate_bitmap >> 12)) { + for (ii = 0; ii < ARRAY_SIZE(rsi_mcsrates); ii++) { + if ((rate_bitmap >> 12) & BIT(ii)) { + common->min_rate = rsi_mcsrates[ii]; + matched = true; + break; + } + } + } + + if (!matched) + common->min_rate = 0xffff; +} + +/** + * rsi_mac80211_sta_add() - This function notifies driver about a peer getting + * connected. + * @hw: pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * @sta: Pointer to the ieee80211_sta structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_mac80211_sta_add(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + + rsi_set_min_rate(hw, sta, common); + + if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) || + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)) { + common->vif_info[0].sgi = true; + } + + if (sta->ht_cap.ht_supported) + ieee80211_start_tx_ba_session(sta, 0, 0); + + mutex_unlock(&common->mutex); + + return 0; +} + +/** + * rsi_mac80211_sta_remove() - This function notifies driver about a peer + * getting disconnected. + * @hw: Pointer to the ieee80211_hw structure. + * @vif: Pointer to the ieee80211_vif structure. + * @sta: Pointer to the ieee80211_sta structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_mac80211_sta_remove(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct rsi_hw *adapter = hw->priv; + struct rsi_common *common = adapter->priv; + + mutex_lock(&common->mutex); + /* Resetting all the fields to default values */ + common->bitrate_mask[IEEE80211_BAND_2GHZ] = 0; + common->bitrate_mask[IEEE80211_BAND_5GHZ] = 0; + common->min_rate = 0xffff; + common->vif_info[0].is_ht = false; + common->vif_info[0].sgi = false; + common->vif_info[0].seq_start = 0; + common->secinfo.ptk_cipher = 0; + common->secinfo.gtk_cipher = 0; + mutex_unlock(&common->mutex); + + return 0; +} + +static struct ieee80211_ops mac80211_ops = { + .tx = rsi_mac80211_tx, + .start = rsi_mac80211_start, + .stop = rsi_mac80211_stop, + .add_interface = rsi_mac80211_add_interface, + .remove_interface = rsi_mac80211_remove_interface, + .config = rsi_mac80211_config, + .bss_info_changed = rsi_mac80211_bss_info_changed, + .conf_tx = rsi_mac80211_conf_tx, + .configure_filter = rsi_mac80211_conf_filter, + .set_key = rsi_mac80211_set_key, + .set_rts_threshold = rsi_mac80211_set_rts_threshold, + .set_bitrate_mask = rsi_mac80211_set_rate_mask, + .ampdu_action = rsi_mac80211_ampdu_action, + .sta_add = rsi_mac80211_sta_add, + .sta_remove = rsi_mac80211_sta_remove, +}; + +/** + * rsi_mac80211_attach() - This function is used to initialize Mac80211 stack. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_mac80211_attach(struct rsi_common *common) +{ + int status = 0; + struct ieee80211_hw *hw = NULL; + struct wiphy *wiphy = NULL; + struct rsi_hw *adapter = common->priv; + u8 addr_mask[ETH_ALEN] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x3}; + + rsi_dbg(INIT_ZONE, "%s: Performing mac80211 attach\n", __func__); + + hw = ieee80211_alloc_hw(sizeof(struct rsi_hw), &mac80211_ops); + if (!hw) { + rsi_dbg(ERR_ZONE, "%s: ieee80211 hw alloc failed\n", __func__); + return -ENOMEM; + } + + wiphy = hw->wiphy; + + SET_IEEE80211_DEV(hw, adapter->device); + + hw->priv = adapter; + adapter->hw = hw; + + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_HAS_RATE_CONTROL | + IEEE80211_HW_AMPDU_AGGREGATION | + 0; + + hw->queues = MAX_HW_QUEUES; + hw->extra_tx_headroom = RSI_NEEDED_HEADROOM; + + hw->max_rates = 1; + hw->max_rate_tries = MAX_RETRIES; + + hw->max_tx_aggregation_subframes = 6; + rsi_register_rates_channels(adapter, IEEE80211_BAND_2GHZ); + hw->rate_control_algorithm = "AARF"; + + SET_IEEE80211_PERM_ADDR(hw, common->mac_addr); + ether_addr_copy(hw->wiphy->addr_mask, addr_mask); + + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + wiphy->retry_short = RETRY_SHORT; + wiphy->retry_long = RETRY_LONG; + wiphy->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD; + wiphy->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; + wiphy->flags = 0; + + wiphy->available_antennas_rx = 1; + wiphy->available_antennas_tx = 1; + wiphy->bands[IEEE80211_BAND_2GHZ] = + &adapter->sbands[IEEE80211_BAND_2GHZ]; + + status = ieee80211_register_hw(hw); + if (status) + return status; + + return rsi_init_dbgfs(adapter); +} diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c new file mode 100644 index 00000000000..410a4a42357 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_main.c @@ -0,0 +1,270 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/module.h> +#include <linux/firmware.h> +#include "rsi_mgmt.h" +#include "rsi_common.h" + +u32 rsi_zone_enabled = /* INFO_ZONE | + INIT_ZONE | + MGMT_TX_ZONE | + MGMT_RX_ZONE | + DATA_TX_ZONE | + DATA_RX_ZONE | + FSM_ZONE | + ISR_ZONE | */ + ERR_ZONE | + 0; +EXPORT_SYMBOL_GPL(rsi_zone_enabled); + +/** + * rsi_prepare_skb() - This function prepares the skb. + * @common: Pointer to the driver private structure. + * @buffer: Pointer to the packet data. + * @pkt_len: Length of the packet. + * @extended_desc: Extended descriptor. + * + * Return: Successfully skb. + */ +static struct sk_buff *rsi_prepare_skb(struct rsi_common *common, + u8 *buffer, + u32 pkt_len, + u8 extended_desc) +{ + struct ieee80211_tx_info *info; + struct skb_info *rx_params; + struct sk_buff *skb = NULL; + u8 payload_offset; + + if (WARN(!pkt_len, "%s: Dummy pkt received", __func__)) + return NULL; + + if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) { + rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n", + __func__, pkt_len); + pkt_len = RSI_RCV_BUFFER_LEN * 4; + } + + pkt_len -= extended_desc; + skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ); + if (skb == NULL) + return NULL; + + payload_offset = (extended_desc + FRAME_DESC_SZ); + skb_put(skb, pkt_len); + memcpy((skb->data), (buffer + payload_offset), skb->len); + + info = IEEE80211_SKB_CB(skb); + rx_params = (struct skb_info *)info->driver_data; + rx_params->rssi = rsi_get_rssi(buffer); + rx_params->channel = rsi_get_connected_channel(common->priv); + + return skb; +} + +/** + * rsi_read_pkt() - This function reads frames from the card. + * @common: Pointer to the driver private structure. + * @rcv_pkt_len: Received pkt length. In case of USB it is 0. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len) +{ + u8 *frame_desc = NULL, extended_desc = 0; + u32 index, length = 0, queueno = 0; + u16 actual_length = 0, offset; + struct sk_buff *skb = NULL; + + index = 0; + do { + frame_desc = &common->rx_data_pkt[index]; + actual_length = *(u16 *)&frame_desc[0]; + offset = *(u16 *)&frame_desc[2]; + + queueno = rsi_get_queueno(frame_desc, offset); + length = rsi_get_length(frame_desc, offset); + extended_desc = rsi_get_extended_desc(frame_desc, offset); + + switch (queueno) { + case RSI_WIFI_DATA_Q: + skb = rsi_prepare_skb(common, + (frame_desc + offset), + length, + extended_desc); + if (skb == NULL) + goto fail; + + rsi_indicate_pkt_to_os(common, skb); + break; + + case RSI_WIFI_MGMT_Q: + rsi_mgmt_pkt_recv(common, (frame_desc + offset)); + break; + + default: + rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n", + __func__, queueno); + goto fail; + } + + index += actual_length; + rcv_pkt_len -= actual_length; + } while (rcv_pkt_len > 0); + + return 0; +fail: + return -EINVAL; +} +EXPORT_SYMBOL_GPL(rsi_read_pkt); + +/** + * rsi_tx_scheduler_thread() - This function is a kernel thread to send the + * packets to the device. + * @common: Pointer to the driver private structure. + * + * Return: None. + */ +static void rsi_tx_scheduler_thread(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + u32 timeout = EVENT_WAIT_FOREVER; + + do { + if (adapter->determine_event_timeout) + timeout = adapter->determine_event_timeout(adapter); + rsi_wait_event(&common->tx_thread.event, timeout); + rsi_reset_event(&common->tx_thread.event); + + if (common->init_done) + rsi_core_qos_processor(common); + } while (atomic_read(&common->tx_thread.thread_done) == 0); + complete_and_exit(&common->tx_thread.completion, 0); +} + +/** + * rsi_91x_init() - This function initializes os interface operations. + * @void: Void. + * + * Return: Pointer to the adapter structure on success, NULL on failure . + */ +struct rsi_hw *rsi_91x_init(void) +{ + struct rsi_hw *adapter = NULL; + struct rsi_common *common = NULL; + u8 ii = 0; + + adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); + if (!adapter) + return NULL; + + adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL); + if (adapter->priv == NULL) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n", + __func__); + kfree(adapter); + return NULL; + } else { + common = adapter->priv; + common->priv = adapter; + } + + for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) + skb_queue_head_init(&common->tx_queue[ii]); + + rsi_init_event(&common->tx_thread.event); + mutex_init(&common->mutex); + mutex_init(&common->tx_rxlock); + + if (rsi_create_kthread(common, + &common->tx_thread, + rsi_tx_scheduler_thread, + "Tx-Thread")) { + rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__); + goto err; + } + + common->init_done = true; + return adapter; + +err: + kfree(common); + kfree(adapter); + return NULL; +} +EXPORT_SYMBOL_GPL(rsi_91x_init); + +/** + * rsi_91x_deinit() - This function de-intializes os intf operations. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +void rsi_91x_deinit(struct rsi_hw *adapter) +{ + struct rsi_common *common = adapter->priv; + u8 ii; + + rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__); + + rsi_kill_thread(&common->tx_thread); + + for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) + skb_queue_purge(&common->tx_queue[ii]); + + common->init_done = false; + + kfree(common); + kfree(adapter->rsi_dev); + kfree(adapter); +} +EXPORT_SYMBOL_GPL(rsi_91x_deinit); + +/** + * rsi_91x_hal_module_init() - This function is invoked when the module is + * loaded into the kernel. + * It registers the client driver. + * @void: Void. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_91x_hal_module_init(void) +{ + rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__); + return 0; +} + +/** + * rsi_91x_hal_module_exit() - This function is called at the time of + * removing/unloading the module. + * It unregisters the client driver. + * @void: Void. + * + * Return: None. + */ +static void rsi_91x_hal_module_exit(void) +{ + rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__); +} + +module_init(rsi_91x_hal_module_init); +module_exit(rsi_91x_hal_module_exit); +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("Station driver for RSI 91x devices"); +MODULE_SUPPORTED_DEVICE("RSI-91x"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c new file mode 100644 index 00000000000..f09c72ef55d --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c @@ -0,0 +1,1302 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/etherdevice.h> +#include "rsi_mgmt.h" +#include "rsi_common.h" + +static struct bootup_params boot_params_20 = { + .magic_number = cpu_to_le16(0x5aa5), + .crystal_good_time = 0x0, + .valid = cpu_to_le32(VALID_20), + .reserved_for_valids = 0x0, + .bootup_mode_info = 0x0, + .digital_loop_back_params = 0x0, + .rtls_timestamp_en = 0x0, + .host_spi_intr_cfg = 0x0, + .device_clk_info = {{ + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| + (TA_PLL_M_VAL_20)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| + (PLL960_N_VAL_20)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = cpu_to_le16(BIT(3)), + .bbp_lmac_clk_reg_val = cpu_to_le16(0x121), + .umac_clock_reg_config = 0x0, + .qspi_uart_clock_reg_config = 0x0 + } + }, + { + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| + (TA_PLL_M_VAL_20)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| + (PLL960_N_VAL_20)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = 0x0, + .bbp_lmac_clk_reg_val = 0x0, + .umac_clock_reg_config = 0x0, + .qspi_uart_clock_reg_config = 0x0 + } + }, + { + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| + (TA_PLL_M_VAL_20)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| + (PLL960_N_VAL_20)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = 0x0, + .bbp_lmac_clk_reg_val = 0x0, + .umac_clock_reg_config = 0x0, + .qspi_uart_clock_reg_config = 0x0 + } + } }, + .buckboost_wakeup_cnt = 0x0, + .pmu_wakeup_wait = 0x0, + .shutdown_wait_time = 0x0, + .pmu_slp_clkout_sel = 0x0, + .wdt_prog_value = 0x0, + .wdt_soc_rst_delay = 0x0, + .dcdc_operation_mode = 0x0, + .soc_reset_wait_cnt = 0x0 +}; + +static struct bootup_params boot_params_40 = { + .magic_number = cpu_to_le16(0x5aa5), + .crystal_good_time = 0x0, + .valid = cpu_to_le32(VALID_40), + .reserved_for_valids = 0x0, + .bootup_mode_info = 0x0, + .digital_loop_back_params = 0x0, + .rtls_timestamp_en = 0x0, + .host_spi_intr_cfg = 0x0, + .device_clk_info = {{ + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| + (TA_PLL_M_VAL_40)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| + (PLL960_N_VAL_40)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = cpu_to_le16(0x09), + .bbp_lmac_clk_reg_val = cpu_to_le16(0x1121), + .umac_clock_reg_config = cpu_to_le16(0x48), + .qspi_uart_clock_reg_config = 0x0 + } + }, + { + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| + (TA_PLL_M_VAL_40)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| + (PLL960_N_VAL_40)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = 0x0, + .bbp_lmac_clk_reg_val = 0x0, + .umac_clock_reg_config = 0x0, + .qspi_uart_clock_reg_config = 0x0 + } + }, + { + .pll_config_g = { + .tapll_info_g = { + .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| + (TA_PLL_M_VAL_40)), + .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), + }, + .pll960_info_g = { + .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| + (PLL960_N_VAL_40)), + .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), + .pll_reg_3 = 0x0, + }, + .afepll_info_g = { + .pll_reg = cpu_to_le16(0x9f0), + } + }, + .switch_clk_g = { + .switch_clk_info = 0x0, + .bbp_lmac_clk_reg_val = 0x0, + .umac_clock_reg_config = 0x0, + .qspi_uart_clock_reg_config = 0x0 + } + } }, + .buckboost_wakeup_cnt = 0x0, + .pmu_wakeup_wait = 0x0, + .shutdown_wait_time = 0x0, + .pmu_slp_clkout_sel = 0x0, + .wdt_prog_value = 0x0, + .wdt_soc_rst_delay = 0x0, + .dcdc_operation_mode = 0x0, + .soc_reset_wait_cnt = 0x0 +}; + +static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130}; + +/** + * rsi_set_default_parameters() - This function sets default parameters. + * @common: Pointer to the driver private structure. + * + * Return: none + */ +static void rsi_set_default_parameters(struct rsi_common *common) +{ + common->band = IEEE80211_BAND_2GHZ; + common->channel_width = BW_20MHZ; + common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; + common->channel = 1; + common->min_rate = 0xffff; + common->fsm_state = FSM_CARD_NOT_READY; + common->iface_down = true; +} + +/** + * rsi_set_contention_vals() - This function sets the contention values for the + * backoff procedure. + * @common: Pointer to the driver private structure. + * + * Return: None. + */ +static void rsi_set_contention_vals(struct rsi_common *common) +{ + u8 ii = 0; + + for (; ii < NUM_EDCA_QUEUES; ii++) { + common->tx_qinfo[ii].wme_params = + (((common->edca_params[ii].cw_min / 2) + + (common->edca_params[ii].aifs)) * + WMM_SHORT_SLOT_TIME + SIFS_DURATION); + common->tx_qinfo[ii].weight = common->tx_qinfo[ii].wme_params; + common->tx_qinfo[ii].pkt_contended = 0; + } +} + +/** + * rsi_send_internal_mgmt_frame() - This function sends management frames to + * firmware.Also schedules packet to queue + * for transmission. + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_send_internal_mgmt_frame(struct rsi_common *common, + struct sk_buff *skb) +{ + struct skb_info *tx_params; + + if (skb == NULL) { + rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__); + return -ENOMEM; + } + tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data; + tx_params->flags |= INTERNAL_MGMT_PKT; + skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb); + rsi_set_event(&common->tx_thread.event); + return 0; +} + +/** + * rsi_load_radio_caps() - This function is used to send radio capabilities + * values to firmware. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, corresponding negative error code on failure. + */ +static int rsi_load_radio_caps(struct rsi_common *common) +{ + struct rsi_radio_caps *radio_caps; + struct rsi_hw *adapter = common->priv; + struct ieee80211_hw *hw = adapter->hw; + u16 inx = 0; + u8 ii; + u8 radio_id = 0; + u16 gc[20] = {0xf0, 0xf0, 0xf0, 0xf0, + 0xf0, 0xf0, 0xf0, 0xf0, + 0xf0, 0xf0, 0xf0, 0xf0, + 0xf0, 0xf0, 0xf0, 0xf0, + 0xf0, 0xf0, 0xf0, 0xf0}; + struct ieee80211_conf *conf = &hw->conf; + struct sk_buff *skb; + + rsi_dbg(INFO_ZONE, "%s: Sending rate symbol req frame\n", __func__); + + skb = dev_alloc_skb(sizeof(struct rsi_radio_caps)); + + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_radio_caps)); + radio_caps = (struct rsi_radio_caps *)skb->data; + + radio_caps->desc_word[1] = cpu_to_le16(RADIO_CAPABILITIES); + radio_caps->desc_word[4] = cpu_to_le16(RSI_RF_TYPE << 8); + + if (common->channel_width == BW_40MHZ) { + radio_caps->desc_word[7] |= cpu_to_le16(RSI_LMAC_CLOCK_80MHZ); + radio_caps->desc_word[7] |= cpu_to_le16(RSI_ENABLE_40MHZ); + if (common->channel_width) { + radio_caps->desc_word[5] = + cpu_to_le16(common->channel_width << 12); + radio_caps->desc_word[5] |= cpu_to_le16(FULL40M_ENABLE); + } + + if (conf_is_ht40_minus(conf)) { + radio_caps->desc_word[5] = 0; + radio_caps->desc_word[5] |= + cpu_to_le16(LOWER_20_ENABLE); + radio_caps->desc_word[5] |= + cpu_to_le16(LOWER_20_ENABLE >> 12); + } + + if (conf_is_ht40_plus(conf)) { + radio_caps->desc_word[5] = 0; + radio_caps->desc_word[5] |= + cpu_to_le16(UPPER_20_ENABLE); + radio_caps->desc_word[5] |= + cpu_to_le16(UPPER_20_ENABLE >> 12); + } + } + + radio_caps->desc_word[7] |= cpu_to_le16(radio_id << 8); + + for (ii = 0; ii < MAX_HW_QUEUES; ii++) { + radio_caps->qos_params[ii].cont_win_min_q = cpu_to_le16(3); + radio_caps->qos_params[ii].cont_win_max_q = cpu_to_le16(0x3f); + radio_caps->qos_params[ii].aifsn_val_q = cpu_to_le16(2); + radio_caps->qos_params[ii].txop_q = 0; + } + + for (ii = 0; ii < MAX_HW_QUEUES - 4; ii++) { + radio_caps->qos_params[ii].cont_win_min_q = + cpu_to_le16(common->edca_params[ii].cw_min); + radio_caps->qos_params[ii].cont_win_max_q = + cpu_to_le16(common->edca_params[ii].cw_max); + radio_caps->qos_params[ii].aifsn_val_q = + cpu_to_le16((common->edca_params[ii].aifs) << 8); + radio_caps->qos_params[ii].txop_q = + cpu_to_le16(common->edca_params[ii].txop); + } + + memcpy(&common->rate_pwr[0], &gc[0], 40); + for (ii = 0; ii < 20; ii++) + radio_caps->gcpd_per_rate[inx++] = + cpu_to_le16(common->rate_pwr[ii] & 0x00FF); + + radio_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_radio_caps) - + FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + + + skb_put(skb, (sizeof(struct rsi_radio_caps))); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_mgmt_pkt_to_core() - This function is the entry point for Mgmt module. + * @common: Pointer to the driver private structure. + * @msg: Pointer to received packet. + * @msg_len: Length of the recieved packet. + * @type: Type of recieved packet. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_mgmt_pkt_to_core(struct rsi_common *common, + u8 *msg, + s32 msg_len, + u8 type) +{ + struct rsi_hw *adapter = common->priv; + struct ieee80211_tx_info *info; + struct skb_info *rx_params; + u8 pad_bytes = msg[4]; + u8 pkt_recv; + struct sk_buff *skb; + char *buffer; + + if (type == RX_DOT11_MGMT) { + if (!adapter->sc_nvifs) + return -ENOLINK; + + msg_len -= pad_bytes; + if ((msg_len <= 0) || (!msg)) { + rsi_dbg(MGMT_RX_ZONE, "Invalid rx msg of len = %d\n", + __func__, msg_len); + return -EINVAL; + } + + skb = dev_alloc_skb(msg_len); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed to allocate skb\n", + __func__); + return -ENOMEM; + } + + buffer = skb_put(skb, msg_len); + + memcpy(buffer, + (u8 *)(msg + FRAME_DESC_SZ + pad_bytes), + msg_len); + + pkt_recv = buffer[0]; + + info = IEEE80211_SKB_CB(skb); + rx_params = (struct skb_info *)info->driver_data; + rx_params->rssi = rsi_get_rssi(msg); + rx_params->channel = rsi_get_channel(msg); + rsi_indicate_pkt_to_os(common, skb); + } else { + rsi_dbg(MGMT_TX_ZONE, "%s: Internal Packet\n", __func__); + } + + return 0; +} + +/** + * rsi_hal_send_sta_notify_frame() - This function sends the station notify + * frame to firmware. + * @common: Pointer to the driver private structure. + * @opmode: Operating mode of device. + * @notify_event: Notification about station connection. + * @bssid: bssid. + * @qos_enable: Qos is enabled. + * @aid: Aid (unique for all STA). + * + * Return: status: 0 on success, corresponding negative error code on failure. + */ +static int rsi_hal_send_sta_notify_frame(struct rsi_common *common, + u8 opmode, + u8 notify_event, + const unsigned char *bssid, + u8 qos_enable, + u16 aid) +{ + struct sk_buff *skb = NULL; + struct rsi_peer_notify *peer_notify; + u16 vap_id = 0; + int status; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending sta notify frame\n", __func__); + + skb = dev_alloc_skb(sizeof(struct rsi_peer_notify)); + + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_peer_notify)); + peer_notify = (struct rsi_peer_notify *)skb->data; + + peer_notify->command = cpu_to_le16(opmode << 1); + + switch (notify_event) { + case STA_CONNECTED: + peer_notify->command |= cpu_to_le16(RSI_ADD_PEER); + break; + case STA_DISCONNECTED: + peer_notify->command |= cpu_to_le16(RSI_DELETE_PEER); + break; + default: + break; + } + + peer_notify->command |= cpu_to_le16((aid & 0xfff) << 4); + ether_addr_copy(peer_notify->mac_addr, bssid); + + peer_notify->sta_flags = cpu_to_le32((qos_enable) ? 1 : 0); + + peer_notify->desc_word[0] = + cpu_to_le16((sizeof(struct rsi_peer_notify) - FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + peer_notify->desc_word[1] = cpu_to_le16(PEER_NOTIFY); + peer_notify->desc_word[7] |= cpu_to_le16(vap_id << 8); + + skb_put(skb, sizeof(struct rsi_peer_notify)); + + status = rsi_send_internal_mgmt_frame(common, skb); + + if (!status && qos_enable) { + rsi_set_contention_vals(common); + status = rsi_load_radio_caps(common); + } + return status; +} + +/** + * rsi_send_aggregation_params_frame() - This function sends the ampdu + * indication frame to firmware. + * @common: Pointer to the driver private structure. + * @tid: traffic identifier. + * @ssn: ssn. + * @buf_size: buffer size. + * @event: notification about station connection. + * + * Return: 0 on success, corresponding negative error code on failure. + */ +int rsi_send_aggregation_params_frame(struct rsi_common *common, + u16 tid, + u16 ssn, + u8 buf_size, + u8 event) +{ + struct sk_buff *skb = NULL; + struct rsi_mac_frame *mgmt_frame; + u8 peer_id = 0; + + skb = dev_alloc_skb(FRAME_DESC_SZ); + + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, FRAME_DESC_SZ); + mgmt_frame = (struct rsi_mac_frame *)skb->data; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending AMPDU indication frame\n", __func__); + + mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); + mgmt_frame->desc_word[1] = cpu_to_le16(AMPDU_IND); + + if (event == STA_TX_ADDBA_DONE) { + mgmt_frame->desc_word[4] = cpu_to_le16(ssn); + mgmt_frame->desc_word[5] = cpu_to_le16(buf_size); + mgmt_frame->desc_word[7] = + cpu_to_le16((tid | (START_AMPDU_AGGR << 4) | (peer_id << 8))); + } else if (event == STA_RX_ADDBA_DONE) { + mgmt_frame->desc_word[4] = cpu_to_le16(ssn); + mgmt_frame->desc_word[7] = cpu_to_le16(tid | + (START_AMPDU_AGGR << 4) | + (RX_BA_INDICATION << 5) | + (peer_id << 8)); + } else if (event == STA_TX_DELBA) { + mgmt_frame->desc_word[7] = cpu_to_le16(tid | + (STOP_AMPDU_AGGR << 4) | + (peer_id << 8)); + } else if (event == STA_RX_DELBA) { + mgmt_frame->desc_word[7] = cpu_to_le16(tid | + (STOP_AMPDU_AGGR << 4) | + (RX_BA_INDICATION << 5) | + (peer_id << 8)); + } + + skb_put(skb, FRAME_DESC_SZ); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_program_bb_rf() - This function starts base band and RF programming. + * This is called after initial configurations are done. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, corresponding negative error code on failure. + */ +static int rsi_program_bb_rf(struct rsi_common *common) +{ + struct sk_buff *skb; + struct rsi_mac_frame *mgmt_frame; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__); + + skb = dev_alloc_skb(FRAME_DESC_SZ); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, FRAME_DESC_SZ); + mgmt_frame = (struct rsi_mac_frame *)skb->data; + + mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); + mgmt_frame->desc_word[1] = cpu_to_le16(BBP_PROG_IN_TA); + mgmt_frame->desc_word[4] = cpu_to_le16(common->endpoint << 8); + + if (common->rf_reset) { + mgmt_frame->desc_word[7] = cpu_to_le16(RF_RESET_ENABLE); + rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n", + __func__); + common->rf_reset = 0; + } + common->bb_rf_prog_count = 1; + mgmt_frame->desc_word[7] |= cpu_to_le16(PUT_BBP_RESET | + BBP_REG_WRITE | (RSI_RF_TYPE << 4)); + skb_put(skb, FRAME_DESC_SZ); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_set_vap_capabilities() - This function send vap capability to firmware. + * @common: Pointer to the driver private structure. + * @opmode: Operating mode of device. + * + * Return: 0 on success, corresponding negative error code on failure. + */ +int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode) +{ + struct sk_buff *skb = NULL; + struct rsi_vap_caps *vap_caps; + u16 vap_id = 0; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__); + + skb = dev_alloc_skb(sizeof(struct rsi_vap_caps)); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_vap_caps)); + vap_caps = (struct rsi_vap_caps *)skb->data; + + vap_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_vap_caps) - + FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + vap_caps->desc_word[1] = cpu_to_le16(VAP_CAPABILITIES); + vap_caps->desc_word[4] = cpu_to_le16(mode | + (common->channel_width << 8)); + vap_caps->desc_word[7] = cpu_to_le16((vap_id << 8) | + (common->mac_id << 4) | + common->radio_id); + + memcpy(vap_caps->mac_addr, common->mac_addr, IEEE80211_ADDR_LEN); + vap_caps->keep_alive_period = cpu_to_le16(90); + vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD); + + vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold); + vap_caps->default_mgmt_rate = 0; + if (conf_is_ht40(&common->priv->hw->conf)) { + vap_caps->default_ctrl_rate = + cpu_to_le32(RSI_RATE_6 | FULL40M_ENABLE << 16); + } else { + vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_6); + } + vap_caps->default_data_rate = 0; + vap_caps->beacon_interval = cpu_to_le16(200); + vap_caps->dtim_period = cpu_to_le16(4); + + skb_put(skb, sizeof(*vap_caps)); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_hal_load_key() - This function is used to load keys within the firmware. + * @common: Pointer to the driver private structure. + * @data: Pointer to the key data. + * @key_len: Key length to be loaded. + * @key_type: Type of key: GROUP/PAIRWISE. + * @key_id: Key index. + * @cipher: Type of cipher used. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_hal_load_key(struct rsi_common *common, + u8 *data, + u16 key_len, + u8 key_type, + u8 key_id, + u32 cipher) +{ + struct sk_buff *skb = NULL; + struct rsi_set_key *set_key; + u16 key_descriptor = 0; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__); + + skb = dev_alloc_skb(sizeof(struct rsi_set_key)); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_set_key)); + set_key = (struct rsi_set_key *)skb->data; + + if ((cipher == WLAN_CIPHER_SUITE_WEP40) || + (cipher == WLAN_CIPHER_SUITE_WEP104)) { + key_len += 1; + key_descriptor |= BIT(2); + if (key_len >= 13) + key_descriptor |= BIT(3); + } else if (cipher != KEY_TYPE_CLEAR) { + key_descriptor |= BIT(4); + if (key_type == RSI_PAIRWISE_KEY) + key_id = 0; + if (cipher == WLAN_CIPHER_SUITE_TKIP) + key_descriptor |= BIT(5); + } + key_descriptor |= (key_type | BIT(13) | (key_id << 14)); + + set_key->desc_word[0] = cpu_to_le16((sizeof(struct rsi_set_key) - + FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + set_key->desc_word[1] = cpu_to_le16(SET_KEY_REQ); + set_key->desc_word[4] = cpu_to_le16(key_descriptor); + + if ((cipher == WLAN_CIPHER_SUITE_WEP40) || + (cipher == WLAN_CIPHER_SUITE_WEP104)) { + memcpy(&set_key->key[key_id][1], + data, + key_len * 2); + } else { + memcpy(&set_key->key[0][0], data, key_len); + } + + memcpy(set_key->tx_mic_key, &data[16], 8); + memcpy(set_key->rx_mic_key, &data[24], 8); + + skb_put(skb, sizeof(struct rsi_set_key)); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/* + * rsi_load_bootup_params() - This function send bootup params to the firmware. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, corresponding error code on failure. + */ +static u8 rsi_load_bootup_params(struct rsi_common *common) +{ + struct sk_buff *skb; + struct rsi_boot_params *boot_params; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__); + skb = dev_alloc_skb(sizeof(struct rsi_boot_params)); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_boot_params)); + boot_params = (struct rsi_boot_params *)skb->data; + + rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__); + + if (common->channel_width == BW_40MHZ) { + memcpy(&boot_params->bootup_params, + &boot_params_40, + sizeof(struct bootup_params)); + rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__, + UMAC_CLK_40BW); + boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW); + } else { + memcpy(&boot_params->bootup_params, + &boot_params_20, + sizeof(struct bootup_params)); + if (boot_params_20.valid != cpu_to_le32(VALID_20)) { + boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW); + rsi_dbg(MGMT_TX_ZONE, + "%s: Packet 20MHZ <=== %d\n", __func__, + UMAC_CLK_20BW); + } else { + boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ); + rsi_dbg(MGMT_TX_ZONE, + "%s: Packet 20MHZ <=== %d\n", __func__, + UMAC_CLK_40MHZ); + } + } + + /** + * Bit{0:11} indicates length of the Packet + * Bit{12:15} indicates host queue number + */ + boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) | + (RSI_WIFI_MGMT_Q << 12)); + boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST); + + skb_put(skb, sizeof(struct rsi_boot_params)); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_send_reset_mac() - This function prepares reset MAC request and sends an + * internal management frame to indicate it to firmware. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, corresponding error code on failure. + */ +static int rsi_send_reset_mac(struct rsi_common *common) +{ + struct sk_buff *skb; + struct rsi_mac_frame *mgmt_frame; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__); + + skb = dev_alloc_skb(FRAME_DESC_SZ); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, FRAME_DESC_SZ); + mgmt_frame = (struct rsi_mac_frame *)skb->data; + + mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); + mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ); + mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8); + + skb_put(skb, FRAME_DESC_SZ); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_set_channel() - This function programs the channel. + * @common: Pointer to the driver private structure. + * @channel: Channel value to be set. + * + * Return: 0 on success, corresponding error code on failure. + */ +int rsi_set_channel(struct rsi_common *common, u16 channel) +{ + struct sk_buff *skb = NULL; + struct rsi_mac_frame *mgmt_frame; + + rsi_dbg(MGMT_TX_ZONE, + "%s: Sending scan req frame\n", __func__); + + skb = dev_alloc_skb(FRAME_DESC_SZ); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, FRAME_DESC_SZ); + mgmt_frame = (struct rsi_mac_frame *)skb->data; + + if (common->band == IEEE80211_BAND_5GHZ) { + if ((channel >= 36) && (channel <= 64)) + channel = ((channel - 32) / 4); + else if ((channel > 64) && (channel <= 140)) + channel = ((channel - 102) / 4) + 8; + else if (channel >= 149) + channel = ((channel - 151) / 4) + 18; + else + return -EINVAL; + } else { + if (channel > 14) { + rsi_dbg(ERR_ZONE, "%s: Invalid chno %d, band = %d\n", + __func__, channel, common->band); + return -EINVAL; + } + } + + mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); + mgmt_frame->desc_word[1] = cpu_to_le16(SCAN_REQUEST); + mgmt_frame->desc_word[4] = cpu_to_le16(channel); + + mgmt_frame->desc_word[7] = cpu_to_le16(PUT_BBP_RESET | + BBP_REG_WRITE | + (RSI_RF_TYPE << 4)); + + mgmt_frame->desc_word[5] = cpu_to_le16(0x01); + + if (common->channel_width == BW_40MHZ) + mgmt_frame->desc_word[5] |= cpu_to_le16(0x1 << 8); + + common->channel = channel; + + skb_put(skb, FRAME_DESC_SZ); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_compare() - This function is used to compare two integers + * @a: pointer to the first integer + * @b: pointer to the second integer + * + * Return: 0 if both are equal, -1 if the first is smaller, else 1 + */ +static int rsi_compare(const void *a, const void *b) +{ + u16 _a = *(const u16 *)(a); + u16 _b = *(const u16 *)(b); + + if (_a > _b) + return -1; + + if (_a < _b) + return 1; + + return 0; +} + +/** + * rsi_map_rates() - This function is used to map selected rates to hw rates. + * @rate: The standard rate to be mapped. + * @offset: Offset that will be returned. + * + * Return: 0 if it is a mcs rate, else 1 + */ +static bool rsi_map_rates(u16 rate, int *offset) +{ + int kk; + for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) { + if (rate == mcs[kk]) { + *offset = kk; + return false; + } + } + + for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) { + if (rate == rsi_rates[kk].bitrate / 5) { + *offset = kk; + break; + } + } + return true; +} + +/** + * rsi_send_auto_rate_request() - This function is to set rates for connection + * and send autorate request to firmware. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, corresponding error code on failure. + */ +static int rsi_send_auto_rate_request(struct rsi_common *common) +{ + struct sk_buff *skb; + struct rsi_auto_rate *auto_rate; + int ii = 0, jj = 0, kk = 0; + struct ieee80211_hw *hw = common->priv->hw; + u8 band = hw->conf.chandef.chan->band; + u8 num_supported_rates = 0; + u8 rate_offset = 0; + u32 rate_bitmap = common->bitrate_mask[band]; + + u16 *selected_rates, min_rate; + + skb = dev_alloc_skb(sizeof(struct rsi_auto_rate)); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + selected_rates = kmalloc(2 * RSI_TBL_SZ, GFP_KERNEL); + if (!selected_rates) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, sizeof(struct rsi_auto_rate)); + memset(selected_rates, 0, 2 * RSI_TBL_SZ); + + auto_rate = (struct rsi_auto_rate *)skb->data; + + auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f)); + auto_rate->collision_tolerance = cpu_to_le16(3); + auto_rate->failure_limit = cpu_to_le16(3); + auto_rate->initial_boundary = cpu_to_le16(3); + auto_rate->max_threshold_limt = cpu_to_le16(27); + + auto_rate->desc_word[1] = cpu_to_le16(AUTO_RATE_IND); + + if (common->channel_width == BW_40MHZ) + auto_rate->desc_word[7] |= cpu_to_le16(1); + + if (band == IEEE80211_BAND_2GHZ) + min_rate = STD_RATE_01; + else + min_rate = STD_RATE_06; + + for (ii = 0, jj = 0; ii < ARRAY_SIZE(rsi_rates); ii++) { + if (rate_bitmap & BIT(ii)) { + selected_rates[jj++] = (rsi_rates[ii].bitrate / 5); + rate_offset++; + } + } + num_supported_rates = jj; + + if (common->vif_info[0].is_ht) { + for (ii = 0; ii < ARRAY_SIZE(mcs); ii++) + selected_rates[jj++] = mcs[ii]; + num_supported_rates += ARRAY_SIZE(mcs); + rate_offset += ARRAY_SIZE(mcs); + } + + if (rate_offset < (RSI_TBL_SZ / 2) - 1) { + for (ii = jj; ii < (RSI_TBL_SZ / 2); ii++) { + selected_rates[jj++] = min_rate; + rate_offset++; + } + } + + sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL); + + /* mapping the rates to RSI rates */ + for (ii = 0; ii < jj; ii++) { + if (rsi_map_rates(selected_rates[ii], &kk)) { + auto_rate->supported_rates[ii] = + cpu_to_le16(rsi_rates[kk].hw_value); + } else { + auto_rate->supported_rates[ii] = + cpu_to_le16(rsi_mcsrates[kk]); + } + } + + /* loading HT rates in the bottom half of the auto rate table */ + if (common->vif_info[0].is_ht) { + if (common->vif_info[0].sgi) + auto_rate->supported_rates[rate_offset++] = + cpu_to_le16(RSI_RATE_MCS7_SG); + + for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1; + ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) { + if (common->vif_info[0].sgi) + auto_rate->supported_rates[ii++] = + cpu_to_le16(rsi_mcsrates[kk] | BIT(9)); + auto_rate->supported_rates[ii] = + cpu_to_le16(rsi_mcsrates[kk--]); + } + + for (; ii < RSI_TBL_SZ; ii++) { + auto_rate->supported_rates[ii] = + cpu_to_le16(rsi_mcsrates[0]); + } + } + + auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2); + auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2); + auto_rate->desc_word[7] |= cpu_to_le16(0 << 8); + num_supported_rates *= 2; + + auto_rate->desc_word[0] = cpu_to_le16((sizeof(*auto_rate) - + FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + + skb_put(skb, + sizeof(struct rsi_auto_rate)); + kfree(selected_rates); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_inform_bss_status() - This function informs about bss status with the + * help of sta notify params by sending an internal + * management frame to firmware. + * @common: Pointer to the driver private structure. + * @status: Bss status type. + * @bssid: Bssid. + * @qos_enable: Qos is enabled. + * @aid: Aid (unique for all STAs). + * + * Return: None. + */ +void rsi_inform_bss_status(struct rsi_common *common, + u8 status, + const unsigned char *bssid, + u8 qos_enable, + u16 aid) +{ + if (status) { + rsi_hal_send_sta_notify_frame(common, + NL80211_IFTYPE_STATION, + STA_CONNECTED, + bssid, + qos_enable, + aid); + if (common->min_rate == 0xffff) + rsi_send_auto_rate_request(common); + } else { + rsi_hal_send_sta_notify_frame(common, + NL80211_IFTYPE_STATION, + STA_DISCONNECTED, + bssid, + qos_enable, + aid); + } +} + +/** + * rsi_eeprom_read() - This function sends a frame to read the mac address + * from the eeprom. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_eeprom_read(struct rsi_common *common) +{ + struct rsi_mac_frame *mgmt_frame; + struct sk_buff *skb; + + rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__); + + skb = dev_alloc_skb(FRAME_DESC_SZ); + if (!skb) { + rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", + __func__); + return -ENOMEM; + } + + memset(skb->data, 0, FRAME_DESC_SZ); + mgmt_frame = (struct rsi_mac_frame *)skb->data; + + /* FrameType */ + mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE); + mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); + /* Number of bytes to read */ + mgmt_frame->desc_word[3] = cpu_to_le16(ETH_ALEN + + WLAN_MAC_MAGIC_WORD_LEN + + WLAN_HOST_MODE_LEN + + WLAN_FW_VERSION_LEN); + /* Address to read */ + mgmt_frame->desc_word[4] = cpu_to_le16(WLAN_MAC_EEPROM_ADDR); + + skb_put(skb, FRAME_DESC_SZ); + + return rsi_send_internal_mgmt_frame(common, skb); +} + +/** + * rsi_handle_ta_confirm_type() - This function handles the confirm frames. + * @common: Pointer to the driver private structure. + * @msg: Pointer to received packet. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_handle_ta_confirm_type(struct rsi_common *common, + u8 *msg) +{ + u8 sub_type = (msg[15] & 0xff); + + switch (sub_type) { + case BOOTUP_PARAMS_REQUEST: + rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n", + __func__); + if (common->fsm_state == FSM_BOOT_PARAMS_SENT) { + if (rsi_eeprom_read(common)) { + common->fsm_state = FSM_CARD_NOT_READY; + goto out; + } else { + common->fsm_state = FSM_EEPROM_READ_MAC_ADDR; + } + } else { + rsi_dbg(ERR_ZONE, + "%s: Received bootup params cfm in %d state\n", + __func__, common->fsm_state); + return 0; + } + break; + + case EEPROM_READ_TYPE: + if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) { + if (msg[16] == MAGIC_WORD) { + u8 offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN + + WLAN_MAC_MAGIC_WORD_LEN); + memcpy(common->mac_addr, + &msg[offset], + ETH_ALEN); + memcpy(&common->fw_ver, + &msg[offset + ETH_ALEN], + sizeof(struct version_info)); + + } else { + common->fsm_state = FSM_CARD_NOT_READY; + break; + } + if (rsi_send_reset_mac(common)) + goto out; + else + common->fsm_state = FSM_RESET_MAC_SENT; + } else { + rsi_dbg(ERR_ZONE, + "%s: Received eeprom mac addr in %d state\n", + __func__, common->fsm_state); + return 0; + } + break; + + case RESET_MAC_REQ: + if (common->fsm_state == FSM_RESET_MAC_SENT) { + rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n", + __func__); + + if (rsi_load_radio_caps(common)) + goto out; + else + common->fsm_state = FSM_RADIO_CAPS_SENT; + } else { + rsi_dbg(ERR_ZONE, + "%s: Received reset mac cfm in %d state\n", + __func__, common->fsm_state); + return 0; + } + break; + + case RADIO_CAPABILITIES: + if (common->fsm_state == FSM_RADIO_CAPS_SENT) { + common->rf_reset = 1; + if (rsi_program_bb_rf(common)) { + goto out; + } else { + common->fsm_state = FSM_BB_RF_PROG_SENT; + rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n", + __func__); + } + } else { + rsi_dbg(ERR_ZONE, + "%s: Received radio caps cfm in %d state\n", + __func__, common->fsm_state); + return 0; + } + break; + + case BB_PROG_VALUES_REQUEST: + case RF_PROG_VALUES_REQUEST: + case BBP_PROG_IN_TA: + rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__); + if (common->fsm_state == FSM_BB_RF_PROG_SENT) { + common->bb_rf_prog_count--; + if (!common->bb_rf_prog_count) { + common->fsm_state = FSM_MAC_INIT_DONE; + return rsi_mac80211_attach(common); + } + } else { + goto out; + } + break; + + default: + rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n", + __func__); + break; + } + return 0; +out: + rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n", + __func__); + return -EINVAL; +} + +/** + * rsi_mgmt_pkt_recv() - This function processes the management packets + * recieved from the hardware. + * @common: Pointer to the driver private structure. + * @msg: Pointer to the received packet. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg) +{ + s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff); + u16 msg_type = (msg[2]); + + rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n", + __func__, msg_len, msg_type); + + if (msg_type == TA_CONFIRM_TYPE) { + return rsi_handle_ta_confirm_type(common, msg); + } else if (msg_type == CARD_READY_IND) { + rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n", + __func__); + if (common->fsm_state == FSM_CARD_NOT_READY) { + rsi_set_default_parameters(common); + + if (rsi_load_bootup_params(common)) + return -ENOMEM; + else + common->fsm_state = FSM_BOOT_PARAMS_SENT; + } else { + return -EINVAL; + } + } else if (msg_type == TX_STATUS_IND) { + if (msg[15] == PROBEREQ_CONFIRM) + common->mgmt_q_block = false; + rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n", + __func__); + } else { + return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type); + } + return 0; +} diff --git a/drivers/net/wireless/rsi/rsi_91x_pkt.c b/drivers/net/wireless/rsi/rsi_91x_pkt.c new file mode 100644 index 00000000000..8e48e72bae2 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_pkt.c @@ -0,0 +1,196 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "rsi_mgmt.h" + +/** + * rsi_send_data_pkt() - This function sends the recieved data packet from + * driver to device. + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: status: 0 on success, -1 on failure. + */ +int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb) +{ + struct rsi_hw *adapter = common->priv; + struct ieee80211_hdr *tmp_hdr = NULL; + struct ieee80211_tx_info *info; + struct skb_info *tx_params; + struct ieee80211_bss_conf *bss = NULL; + int status = -EINVAL; + u8 ieee80211_size = MIN_802_11_HDR_LEN; + u8 extnd_size = 0; + __le16 *frame_desc; + u16 seq_num = 0; + + info = IEEE80211_SKB_CB(skb); + bss = &info->control.vif->bss_conf; + tx_params = (struct skb_info *)info->driver_data; + + if (!bss->assoc) + goto err; + + tmp_hdr = (struct ieee80211_hdr *)&skb->data[0]; + seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4); + + extnd_size = ((uintptr_t)skb->data & 0x3); + + if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) { + rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__); + status = -ENOSPC; + goto err; + } + + skb_push(skb, (FRAME_DESC_SZ + extnd_size)); + frame_desc = (__le16 *)&skb->data[0]; + memset((u8 *)frame_desc, 0, FRAME_DESC_SZ); + + if (ieee80211_is_data_qos(tmp_hdr->frame_control)) { + ieee80211_size += 2; + frame_desc[6] |= cpu_to_le16(BIT(12)); + } + + if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) && + (common->secinfo.security_enable)) { + if (rsi_is_cipher_wep(common)) + ieee80211_size += 4; + else + ieee80211_size += 8; + frame_desc[6] |= cpu_to_le16(BIT(15)); + } + + frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) | + (RSI_WIFI_DATA_Q << 12)); + frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8); + + if (common->min_rate != 0xffff) { + /* Send fixed rate */ + frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE); + frame_desc[4] = cpu_to_le16(common->min_rate); + } + + frame_desc[6] |= cpu_to_le16(seq_num & 0xfff); + frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) | + (skb->priority & 0xf) | + (tx_params->sta_id << 8)); + + status = adapter->host_intf_write_pkt(common->priv, + skb->data, + skb->len); + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", + __func__); + +err: + ++common->tx_stats.total_tx_pkt_freed[skb->priority]; + rsi_indicate_tx_status(common->priv, skb, status); + return status; +} + +/** + * rsi_send_mgmt_pkt() - This functions sends the received management packet + * from driver to device. + * @common: Pointer to the driver private structure. + * @skb: Pointer to the socket buffer structure. + * + * Return: status: 0 on success, -1 on failure. + */ +int rsi_send_mgmt_pkt(struct rsi_common *common, + struct sk_buff *skb) +{ + struct rsi_hw *adapter = common->priv; + struct ieee80211_hdr *wh = NULL; + struct ieee80211_tx_info *info; + struct ieee80211_bss_conf *bss = NULL; + struct skb_info *tx_params; + int status = -E2BIG; + __le16 *msg = NULL; + u8 extnd_size = 0; + u8 vap_id = 0; + + info = IEEE80211_SKB_CB(skb); + tx_params = (struct skb_info *)info->driver_data; + extnd_size = ((uintptr_t)skb->data & 0x3); + + if (tx_params->flags & INTERNAL_MGMT_PKT) { + if ((extnd_size) > skb_headroom(skb)) { + rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__); + dev_kfree_skb(skb); + return -ENOSPC; + } + skb_push(skb, extnd_size); + skb->data[extnd_size + 4] = extnd_size; + status = adapter->host_intf_write_pkt(common->priv, + (u8 *)skb->data, + skb->len); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write the packet\n", __func__); + } + dev_kfree_skb(skb); + return status; + } + + bss = &info->control.vif->bss_conf; + wh = (struct ieee80211_hdr *)&skb->data[0]; + + if (FRAME_DESC_SZ > skb_headroom(skb)) + goto err; + + skb_push(skb, FRAME_DESC_SZ); + memset(skb->data, 0, FRAME_DESC_SZ); + msg = (__le16 *)skb->data; + + if (skb->len > MAX_MGMT_PKT_SIZE) { + rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__); + goto err; + } + + msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) | + (RSI_WIFI_MGMT_Q << 12)); + msg[1] = cpu_to_le16(TX_DOT11_MGMT); + msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8); + msg[3] = cpu_to_le16(RATE_INFO_ENABLE); + msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4); + + if (wh->addr1[0] & BIT(0)) + msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT); + + if (common->band == IEEE80211_BAND_2GHZ) + msg[4] = cpu_to_le16(RSI_11B_MODE); + else + msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE); + + /* Indicate to firmware to give cfm */ + if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) { + msg[1] |= cpu_to_le16(BIT(10)); + msg[7] = cpu_to_le16(PROBEREQ_CONFIRM); + common->mgmt_q_block = true; + } + + msg[7] |= cpu_to_le16(vap_id << 8); + + status = adapter->host_intf_write_pkt(common->priv, + (u8 *)msg, + skb->len); + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__); + +err: + rsi_indicate_tx_status(common->priv, skb, status); + return status; +} diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c new file mode 100644 index 00000000000..852453f386e --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -0,0 +1,850 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/module.h> +#include "rsi_sdio.h" +#include "rsi_common.h" + +/** + * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg. + * @rw: Read/write + * @func: function number + * @raw: indicates whether to perform read after write + * @address: address to which to read/write + * @writedata: data to write + * + * Return: argument + */ +static u32 rsi_sdio_set_cmd52_arg(bool rw, + u8 func, + u8 raw, + u32 address, + u8 writedata) +{ + return ((rw & 1) << 31) | ((func & 0x7) << 28) | + ((raw & 1) << 27) | (1 << 26) | + ((address & 0x1FFFF) << 9) | (1 << 8) | + (writedata & 0xFF); +} + +/** + * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card. + * @card: Pointer to the mmc_card. + * @address: Address to write. + * @byte: Data to write. + * + * Return: Write status. + */ +static int rsi_cmd52writebyte(struct mmc_card *card, + u32 address, + u8 byte) +{ + struct mmc_command io_cmd; + u32 arg; + + memset(&io_cmd, 0, sizeof(io_cmd)); + arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.arg = arg; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + return mmc_wait_for_cmd(card->host, &io_cmd, 0); +} + +/** + * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card. + * @card: Pointer to the mmc_card. + * @address: Address to read from. + * @byte: Variable to store read value. + * + * Return: Read status. + */ +static int rsi_cmd52readbyte(struct mmc_card *card, + u32 address, + u8 *byte) +{ + struct mmc_command io_cmd; + u32 arg; + int err; + + memset(&io_cmd, 0, sizeof(io_cmd)); + arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.arg = arg; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(card->host, &io_cmd, 0); + if ((!err) && (byte)) + *byte = io_cmd.resp[0] & 0xFF; + return err; +} + +/** + * rsi_issue_sdiocommand() - This function issues sdio commands. + * @func: Pointer to the sdio_func structure. + * @opcode: Opcode value. + * @arg: Arguments to pass. + * @flags: Flags which are set. + * @resp: Pointer to store response. + * + * Return: err: command status as 0 or -1. + */ +static int rsi_issue_sdiocommand(struct sdio_func *func, + u32 opcode, + u32 arg, + u32 flags, + u32 *resp) +{ + struct mmc_command cmd; + struct mmc_host *host; + int err; + + host = func->card->host; + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = opcode; + cmd.arg = arg; + cmd.flags = flags; + err = mmc_wait_for_cmd(host, &cmd, 3); + + if ((!err) && (resp)) + *resp = cmd.resp[0]; + + return err; +} + +/** + * rsi_handle_interrupt() - This function is called upon the occurence + * of an interrupt. + * @function: Pointer to the sdio_func structure. + * + * Return: None. + */ +static void rsi_handle_interrupt(struct sdio_func *function) +{ + struct rsi_hw *adapter = sdio_get_drvdata(function); + + sdio_release_host(function); + rsi_interrupt_handler(adapter); + sdio_claim_host(function); +} + +/** + * rsi_reset_card() - This function resets and re-initializes the card. + * @pfunction: Pointer to the sdio_func structure. + * + * Return: None. + */ +static void rsi_reset_card(struct sdio_func *pfunction) +{ + int ret = 0; + int err; + struct mmc_card *card = pfunction->card; + struct mmc_host *host = card->host; + s32 bit = (fls(host->ocr_avail) - 1); + u8 cmd52_resp; + u32 clock, resp, i; + u16 rca; + + /* Reset 9110 chip */ + ret = rsi_cmd52writebyte(pfunction->card, + SDIO_CCCR_ABORT, + (1 << 3)); + + /* Card will not send any response as it is getting reset immediately + * Hence expect a timeout status from host controller + */ + if (ret != -ETIMEDOUT) + rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret); + + /* Wait for few milli seconds to get rid of residue charges if any */ + msleep(20); + + /* Initialize the SDIO card */ + host->ios.vdd = bit; + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; + host->ios.power_mode = MMC_POWER_UP; + host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; + host->ops->set_ios(host, &host->ios); + + /* + * This delay should be sufficient to allow the power supply + * to reach the minimum voltage. + */ + msleep(20); + + host->ios.clock = host->f_min; + host->ios.power_mode = MMC_POWER_ON; + host->ops->set_ios(host, &host->ios); + + /* + * This delay must be at least 74 clock sizes, or 1 ms, or the + * time required to reach a stable voltage. + */ + msleep(20); + + /* Issue CMD0. Goto idle state */ + host->ios.chip_select = MMC_CS_HIGH; + host->ops->set_ios(host, &host->ios); + msleep(20); + err = rsi_issue_sdiocommand(pfunction, + MMC_GO_IDLE_STATE, + 0, + (MMC_RSP_NONE | MMC_CMD_BC), + NULL); + host->ios.chip_select = MMC_CS_DONTCARE; + host->ops->set_ios(host, &host->ios); + msleep(20); + host->use_spi_crc = 0; + + if (err) + rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err); + + if (!host->ocr_avail) { + /* Issue CMD5, arg = 0 */ + err = rsi_issue_sdiocommand(pfunction, + SD_IO_SEND_OP_COND, + 0, + (MMC_RSP_R4 | MMC_CMD_BCR), + &resp); + if (err) + rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", + __func__, err); + host->ocr_avail = resp; + } + + /* Issue CMD5, arg = ocr. Wait till card is ready */ + for (i = 0; i < 100; i++) { + err = rsi_issue_sdiocommand(pfunction, + SD_IO_SEND_OP_COND, + host->ocr_avail, + (MMC_RSP_R4 | MMC_CMD_BCR), + &resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", + __func__, err); + break; + } + + if (resp & MMC_CARD_BUSY) + break; + msleep(20); + } + + if ((i == 100) || (err)) { + rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n", + __func__, i, err); + return; + } + + /* Issue CMD3, get RCA */ + err = rsi_issue_sdiocommand(pfunction, + SD_SEND_RELATIVE_ADDR, + 0, + (MMC_RSP_R6 | MMC_CMD_BCR), + &resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err); + return; + } + rca = resp >> 16; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + host->ops->set_ios(host, &host->ios); + + /* Issue CMD7, select card */ + err = rsi_issue_sdiocommand(pfunction, + MMC_SELECT_CARD, + (rca << 16), + (MMC_RSP_R1 | MMC_CMD_AC), + NULL); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err); + return; + } + + /* Enable high speed */ + if (card->host->caps & MMC_CAP_SD_HIGHSPEED) { + rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__); + err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n", + __func__, err); + card->state &= ~MMC_STATE_HIGHSPEED; + } else { + err = rsi_cmd52writebyte(card, + SDIO_CCCR_SPEED, + (cmd52_resp | SDIO_SPEED_EHS)); + if (err) { + rsi_dbg(ERR_ZONE, + "%s: CCR speed regwrite failed %d\n", + __func__, err); + return; + } + mmc_card_set_highspeed(card); + host->ios.timing = MMC_TIMING_SD_HS; + host->ops->set_ios(host, &host->ios); + } + } + + /* Set clock */ + if (mmc_card_highspeed(card)) + clock = 50000000; + else + clock = card->cis.max_dtr; + + if (clock > host->f_max) + clock = host->f_max; + + host->ios.clock = clock; + host->ops->set_ios(host, &host->ios); + + if (card->host->caps & MMC_CAP_4_BIT_DATA) { + /* CMD52: Set bus width & disable card detect resistor */ + err = rsi_cmd52writebyte(card, + SDIO_CCCR_IF, + (SDIO_BUS_CD_DISABLE | + SDIO_BUS_WIDTH_4BIT)); + if (err) { + rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n", + __func__, err); + return; + } + host->ios.bus_width = MMC_BUS_WIDTH_4; + host->ops->set_ios(host, &host->ios); + } +} + +/** + * rsi_setclock() - This function sets the clock frequency. + * @adapter: Pointer to the adapter structure. + * @freq: Clock frequency. + * + * Return: None. + */ +static void rsi_setclock(struct rsi_hw *adapter, u32 freq) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + struct mmc_host *host = dev->pfunction->card->host; + u32 clock; + + clock = freq * 1000; + if (clock > host->f_max) + clock = host->f_max; + host->ios.clock = clock; + host->ops->set_ios(host, &host->ios); +} + +/** + * rsi_setblocklength() - This function sets the host block length. + * @adapter: Pointer to the adapter structure. + * @length: Block length to be set. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_setblocklength(struct rsi_hw *adapter, u32 length) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__); + + status = sdio_set_block_size(dev->pfunction, length); + dev->pfunction->max_blksize = 256; + + rsi_dbg(INFO_ZONE, + "%s: Operational blk length is %d\n", __func__, length); + return status; +} + +/** + * rsi_setupcard() - This function queries and sets the card's features. + * @adapter: Pointer to the adapter structure. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_setupcard(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status = 0; + + rsi_setclock(adapter, 50000); + + dev->tx_blk_size = 256; + status = rsi_setblocklength(adapter, dev->tx_blk_size); + if (status) + rsi_dbg(ERR_ZONE, + "%s: Unable to set block length\n", __func__); + return status; +} + +/** + * rsi_sdio_read_register() - This function reads one byte of information + * from a register. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that stores the data read. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_read_register(struct rsi_hw *adapter, + u32 addr, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 fun_num = 0; + int status; + + sdio_claim_host(dev->pfunction); + + if (fun_num == 0) + *data = sdio_f0_readb(dev->pfunction, addr, &status); + else + *data = sdio_readb(dev->pfunction, addr, &status); + + sdio_release_host(dev->pfunction); + + return status; +} + +/** + * rsi_sdio_write_register() - This function writes one byte of information + * into a register. + * @adapter: Pointer to the adapter structure. + * @function: Function Number. + * @addr: Address of the register. + * @data: Pointer to the data tha has to be written. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_write_register(struct rsi_hw *adapter, + u8 function, + u32 addr, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status = 0; + + sdio_claim_host(dev->pfunction); + + if (function == 0) + sdio_f0_writeb(dev->pfunction, *data, addr, &status); + else + sdio_writeb(dev->pfunction, *data, addr, &status); + + sdio_release_host(dev->pfunction); + + return status; +} + +/** + * rsi_sdio_ack_intr() - This function acks the interrupt received. + * @adapter: Pointer to the adapter structure. + * @int_bit: Interrupt bit to write into register. + * + * Return: None. + */ +void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit) +{ + int status; + status = rsi_sdio_write_register(adapter, + 1, + (SDIO_FUN1_INTR_CLR_REG | + RSI_SD_REQUEST_MASTER), + &int_bit); + if (status) + rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__); +} + + + +/** + * rsi_sdio_read_register_multiple() - This function read multiple bytes of + * information from the SD card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @count: Number of multiple bytes to be read. + * @data: Pointer to the read data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter, + u32 addr, + u32 count, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 status; + + sdio_claim_host(dev->pfunction); + + status = sdio_readsb(dev->pfunction, data, addr, count); + + sdio_release_host(dev->pfunction); + + if (status != 0) + rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__); + return status; +} + +/** + * rsi_sdio_write_register_multiple() - This function writes multiple bytes of + * information to the SD card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, + u32 addr, + u8 *data, + u32 count) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + + if (dev->write_fail > 1) { + rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__); + return 0; + } else if (dev->write_fail == 1) { + /** + * Assuming it is a CRC failure, we want to allow another + * card write + */ + rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__); + dev->write_fail++; + } + + sdio_claim_host(dev->pfunction); + + status = sdio_writesb(dev->pfunction, addr, data, count); + + sdio_release_host(dev->pfunction); + + if (status) { + rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n", + __func__, status); + dev->write_fail = 2; + } else { + memcpy(dev->prev_desc, data, FRAME_DESC_SZ); + } + return status; +} + +/** + * rsi_sdio_host_intf_write_pkt() - This function writes the packet to device. + * @adapter: Pointer to the adapter structure. + * @pkt: Pointer to the data to be written on to the device. + * @len: length of the data to be written on to the device. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 len) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 block_size = dev->tx_blk_size; + u32 num_blocks, address, length; + u32 queueno; + int status; + + queueno = ((pkt[1] >> 4) & 0xf); + + num_blocks = len / block_size; + + if (len % block_size) + num_blocks++; + + address = (num_blocks * block_size | (queueno << 12)); + length = num_blocks * block_size; + + status = rsi_sdio_write_register_multiple(adapter, + address, + (u8 *)pkt, + length); + if (status) + rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n", + __func__, status); + rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__); + return status; +} + +/** + * rsi_sdio_host_intf_read_pkt() - This function reads the packet + from the device. + * @adapter: Pointer to the adapter data structure. + * @pkt: Pointer to the packet data to be read from the the device. + * @length: Length of the data to be read from the device. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 length) +{ + int status = -EINVAL; + + if (!length) { + rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__); + return status; + } + + status = rsi_sdio_read_register_multiple(adapter, + length, + length, /*num of bytes*/ + (u8 *)pkt); + + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__, + status); + return status; +} + +/** + * rsi_init_sdio_interface() - This function does init specific to SDIO. + * + * @adapter: Pointer to the adapter data structure. + * @pkt: Pointer to the packet data to be read from the the device. + * + * Return: 0 on success, -1 on failure. + */ + +static int rsi_init_sdio_interface(struct rsi_hw *adapter, + struct sdio_func *pfunction) +{ + struct rsi_91x_sdiodev *rsi_91x_dev; + int status = -ENOMEM; + + rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL); + if (!rsi_91x_dev) + return status; + + adapter->rsi_dev = rsi_91x_dev; + + sdio_claim_host(pfunction); + + pfunction->enable_timeout = 100; + status = sdio_enable_func(pfunction); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__); + sdio_release_host(pfunction); + return status; + } + + rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); + + rsi_91x_dev->pfunction = pfunction; + adapter->device = &pfunction->dev; + + sdio_set_drvdata(pfunction, adapter); + + status = rsi_setupcard(adapter); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__); + goto fail; + } + + rsi_dbg(INIT_ZONE, "%s: Setup card succesfully\n", __func__); + + status = rsi_init_sdio_slave_regs(adapter); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__); + goto fail; + } + sdio_release_host(pfunction); + + adapter->host_intf_write_pkt = rsi_sdio_host_intf_write_pkt; + adapter->host_intf_read_pkt = rsi_sdio_host_intf_read_pkt; + adapter->determine_event_timeout = rsi_sdio_determine_event_timeout; + adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register; + +#ifdef CONFIG_RSI_DEBUGFS + adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES; +#endif + return status; +fail: + sdio_disable_func(pfunction); + sdio_release_host(pfunction); + return status; +} + +/** + * rsi_probe() - This function is called by kernel when the driver provided + * Vendor and device IDs are matched. All the initialization + * work is done here. + * @pfunction: Pointer to the sdio_func structure. + * @id: Pointer to sdio_device_id structure. + * + * Return: 0 on success, 1 on failure. + */ +static int rsi_probe(struct sdio_func *pfunction, + const struct sdio_device_id *id) +{ + struct rsi_hw *adapter; + + rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); + + adapter = rsi_91x_init(); + if (!adapter) { + rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", + __func__); + return 1; + } + + if (rsi_init_sdio_interface(adapter, pfunction)) { + rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n", + __func__); + goto fail; + } + + if (rsi_sdio_device_init(adapter->priv)) { + rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__); + sdio_claim_host(pfunction); + sdio_disable_func(pfunction); + sdio_release_host(pfunction); + goto fail; + } + + sdio_claim_host(pfunction); + if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) { + rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__); + sdio_release_host(pfunction); + goto fail; + } + + sdio_release_host(pfunction); + rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__); + + return 0; +fail: + rsi_91x_deinit(adapter); + rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); + return 1; +} + +/** + * rsi_disconnect() - This function performs the reverse of the probe function. + * @pfunction: Pointer to the sdio_func structure. + * + * Return: void. + */ +static void rsi_disconnect(struct sdio_func *pfunction) +{ + struct rsi_hw *adapter = sdio_get_drvdata(pfunction); + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + + if (!adapter) + return; + + dev->write_fail = 2; + rsi_mac80211_detach(adapter); + + sdio_claim_host(pfunction); + sdio_release_irq(pfunction); + sdio_disable_func(pfunction); + rsi_91x_deinit(adapter); + /* Resetting to take care of the case, where-in driver is re-loaded */ + rsi_reset_card(pfunction); + sdio_release_host(pfunction); +} + +#ifdef CONFIG_PM +static int rsi_suspend(struct device *dev) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static int rsi_resume(struct device *dev) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static const struct dev_pm_ops rsi_pm_ops = { + .suspend = rsi_suspend, + .resume = rsi_resume, +}; +#endif + +static const struct sdio_device_id rsi_dev_table[] = { + { SDIO_DEVICE(0x303, 0x100) }, + { SDIO_DEVICE(0x041B, 0x0301) }, + { SDIO_DEVICE(0x041B, 0x0201) }, + { SDIO_DEVICE(0x041B, 0x9330) }, + { /* Blank */}, +}; + +static struct sdio_driver rsi_driver = { + .name = "RSI-SDIO WLAN", + .probe = rsi_probe, + .remove = rsi_disconnect, + .id_table = rsi_dev_table, +#ifdef CONFIG_PM + .drv = { + .pm = &rsi_pm_ops, + } +#endif +}; + +/** + * rsi_module_init() - This function registers the sdio module. + * @void: Void. + * + * Return: 0 on success. + */ +static int rsi_module_init(void) +{ + sdio_register_driver(&rsi_driver); + rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__); + return 0; +} + +/** + * rsi_module_exit() - This function unregisters the sdio module. + * @void: Void. + * + * Return: None. + */ +static void rsi_module_exit(void) +{ + sdio_unregister_driver(&rsi_driver); + rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__); +} + +module_init(rsi_module_init); +module_exit(rsi_module_exit); + +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("Common SDIO layer for RSI drivers"); +MODULE_SUPPORTED_DEVICE("RSI-91x"); +MODULE_DEVICE_TABLE(sdio, rsi_dev_table); +MODULE_FIRMWARE(FIRMWARE_RSI9113); +MODULE_VERSION("0.1"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c new file mode 100644 index 00000000000..f1cb99cafed --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c @@ -0,0 +1,566 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/firmware.h> +#include "rsi_sdio.h" +#include "rsi_common.h" + +/** + * rsi_sdio_master_access_msword() - This function sets the AHB master access + * MS word in the SDIO slave registers. + * @adapter: Pointer to the adapter structure. + * @ms_word: ms word need to be initialized. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_sdio_master_access_msword(struct rsi_hw *adapter, + u16 ms_word) +{ + u8 byte; + u8 function = 0; + int status = 0; + + byte = (u8)(ms_word & 0x00FF); + + rsi_dbg(INIT_ZONE, + "%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte); + + status = rsi_sdio_write_register(adapter, + function, + SDIO_MASTER_ACCESS_MSBYTE, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: fail to access MASTER_ACCESS_MSBYTE\n", + __func__); + return -1; + } + + byte = (u8)(ms_word >> 8); + + rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte); + status = rsi_sdio_write_register(adapter, + function, + SDIO_MASTER_ACCESS_LSBYTE, + &byte); + return status; +} + +/** + * rsi_copy_to_card() - This function includes the actual funtionality of + * copying the TA firmware to the card.Basically this + * function includes opening the TA file,reading the + * TA file and writing their values in blocks of data. + * @common: Pointer to the driver private structure. + * @fw: Pointer to the firmware value to be written. + * @len: length of firmware file. + * @num_blocks: Number of blocks to be written to the card. + * + * Return: 0 on success and -1 on failure. + */ +static int rsi_copy_to_card(struct rsi_common *common, + const u8 *fw, + u32 len, + u32 num_blocks) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 indx, ii; + u32 block_size = dev->tx_blk_size; + u32 lsb_address; + __le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR, + TA_PC_ZERO, TA_RELEASE_THREAD_VALUE }; + u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG, + TA_TH0_PC_REG, TA_RELEASE_THREAD_REG }; + u32 base_address; + u16 msb_address; + + base_address = TA_LOAD_ADDRESS; + msb_address = base_address >> 16; + + for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) { + lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER); + if (rsi_sdio_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load %s blk\n", __func__, + FIRMWARE_RSI9113); + return -1; + } + rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii); + base_address += block_size; + if ((base_address >> 16) != msb_address) { + msb_address += 1; + if (rsi_sdio_master_access_msword(adapter, + msb_address)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word reg\n", + __func__); + return -1; + } + } + } + + if (len % block_size) { + lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER); + if (rsi_sdio_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + len % block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load f/w\n", __func__); + return -1; + } + } + rsi_dbg(INIT_ZONE, + "%s: Succesfully loaded TA instructions\n", __func__); + + if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word to common reg\n", + __func__); + return -1; + } + + for (ii = 0; ii < ARRAY_SIZE(data); ii++) { + /* Bringing TA out of reset */ + if (rsi_sdio_write_register_multiple(adapter, + (address[ii] | + RSI_SD_REQUEST_MASTER), + (u8 *)&data[ii], + 4)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to hold TA threads\n", __func__); + return -1; + } + } + + rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__); + return 0; +} + +/** + * rsi_load_ta_instructions() - This function includes the actual funtionality + * of loading the TA firmware.This function also + * includes opening the TA file,reading the TA + * file and writing their value in blocks of data. + * @common: Pointer to the driver private structure. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_load_ta_instructions(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 len; + u32 num_blocks; + const u8 *fw; + const struct firmware *fw_entry = NULL; + u32 block_size = dev->tx_blk_size; + int status = 0; + u32 base_address; + u16 msb_address; + + if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word to common reg\n", + __func__); + return -1; + } + base_address = TA_LOAD_ADDRESS; + msb_address = (base_address >> 16); + + if (rsi_sdio_master_access_msword(adapter, msb_address)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word reg\n", __func__); + return -1; + } + + status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device); + if (status < 0) { + rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n", + __func__, FIRMWARE_RSI9113); + return status; + } + + fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); + len = fw_entry->size; + + if (len % 4) + len += (4 - (len % 4)); + + num_blocks = (len / block_size); + + rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len); + rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks); + + status = rsi_copy_to_card(common, fw, len, num_blocks); + release_firmware(fw_entry); + return status; +} + +/** + * rsi_process_pkt() - This Function reads rx_blocks register and figures out + * the size of the rx pkt. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_process_pkt(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + u8 num_blks = 0; + u32 rcv_pkt_len = 0; + int status = 0; + + status = rsi_sdio_read_register(adapter, + SDIO_RX_NUM_BLOCKS_REG, + &num_blks); + + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read pkt length from the card:\n", + __func__); + return status; + } + rcv_pkt_len = (num_blks * 256); + + common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL); + if (!common->rx_data_pkt) { + rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n", + __func__); + return -1; + } + + status = rsi_sdio_host_intf_read_pkt(adapter, + common->rx_data_pkt, + rcv_pkt_len); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n", + __func__); + goto fail; + } + + status = rsi_read_pkt(common, rcv_pkt_len); + kfree(common->rx_data_pkt); + return status; + +fail: + kfree(common->rx_data_pkt); + return -1; +} + +/** + * rsi_init_sdio_slave_regs() - This function does the actual initialization + * of SDBUS slave registers. + * @adapter: Pointer to the adapter structure. + * + * Return: status: 0 on success, -1 on failure. + */ +int rsi_init_sdio_slave_regs(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 function = 0; + u8 byte; + int status = 0; + + if (dev->next_read_delay) { + byte = dev->next_read_delay; + status = rsi_sdio_write_register(adapter, + function, + SDIO_NXT_RD_DELAY2, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_NXT_RD_DELAY2\n", + __func__); + return -1; + } + } + + if (dev->sdio_high_speed_enable) { + rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__); + byte = 0x3; + + status = rsi_sdio_write_register(adapter, + function, + SDIO_REG_HIGH_SPEED, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to enable SDIO high speed\n", + __func__); + return -1; + } + } + + /* This tells SDIO FIFO when to start read to host */ + rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__); + byte = 0x24; + + status = rsi_sdio_write_register(adapter, + function, + SDIO_READ_START_LVL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_READ_START_LVL\n", __func__); + return -1; + } + + rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__); + byte = (128 - 32); + + status = rsi_sdio_write_register(adapter, + function, + SDIO_READ_FIFO_CTL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__); + return -1; + } + + byte = 32; + status = rsi_sdio_write_register(adapter, + function, + SDIO_WRITE_FIFO_CTL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__); + return -1; + } + + return 0; +} + +/** + * rsi_interrupt_handler() - This function read and process SDIO interrupts. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +void rsi_interrupt_handler(struct rsi_hw *adapter) +{ + struct rsi_common *common = adapter->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + enum sdio_interrupt_type isr_type; + u8 isr_status = 0; + u8 fw_status = 0; + + dev->rx_info.sdio_int_counter++; + + do { + mutex_lock(&common->tx_rxlock); + status = rsi_sdio_read_register(common->priv, + RSI_FN1_INT_REGISTER, + &isr_status); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to Read Intr Status Register\n", + __func__); + mutex_unlock(&common->tx_rxlock); + return; + } + + if (isr_status == 0) { + rsi_set_event(&common->tx_thread.event); + dev->rx_info.sdio_intr_status_zero++; + mutex_unlock(&common->tx_rxlock); + return; + } + + rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n", + __func__, isr_status, (1 << MSDU_PKT_PENDING), + (1 << FW_ASSERT_IND)); + + do { + RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type); + + switch (isr_type) { + case BUFFER_AVAILABLE: + dev->rx_info.watch_bufferfull_count = 0; + dev->rx_info.buffer_full = false; + dev->rx_info.mgmt_buffer_full = false; + rsi_sdio_ack_intr(common->priv, + (1 << PKT_BUFF_AVAILABLE)); + rsi_set_event((&common->tx_thread.event)); + rsi_dbg(ISR_ZONE, + "%s: ==> BUFFER_AVILABLE <==\n", + __func__); + dev->rx_info.buf_avilable_counter++; + break; + + case FIRMWARE_ASSERT_IND: + rsi_dbg(ERR_ZONE, + "%s: ==> FIRMWARE Assert <==\n", + __func__); + status = rsi_sdio_read_register(common->priv, + SDIO_FW_STATUS_REG, + &fw_status); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read f/w reg\n", + __func__); + } else { + rsi_dbg(ERR_ZONE, + "%s: Firmware Status is 0x%x\n", + __func__ , fw_status); + rsi_sdio_ack_intr(common->priv, + (1 << FW_ASSERT_IND)); + } + + common->fsm_state = FSM_CARD_NOT_READY; + break; + + case MSDU_PACKET_PENDING: + rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n"); + dev->rx_info.total_sdio_msdu_pending_intr++; + + status = rsi_process_pkt(common); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read pkt\n", + __func__); + mutex_unlock(&common->tx_rxlock); + return; + } + break; + default: + rsi_sdio_ack_intr(common->priv, isr_status); + dev->rx_info.total_sdio_unknown_intr++; + isr_status = 0; + rsi_dbg(ISR_ZONE, + "Unknown Interrupt %x\n", + isr_status); + break; + } + isr_status ^= BIT(isr_type - 1); + } while (isr_status); + mutex_unlock(&common->tx_rxlock); + } while (1); +} + +/** + * rsi_device_init() - This Function Initializes The HAL. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_device_init(struct rsi_common *common) +{ + if (rsi_load_ta_instructions(common)) + return -1; + + if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", + __func__); + return -1; + } + rsi_dbg(INIT_ZONE, + "%s: Setting ms word to 0x41050000\n", __func__); + + return 0; +} + +/** + * rsi_sdio_read_buffer_status_register() - This function is used to the read + * buffer status register and set + * relevant fields in + * rsi_91x_sdiodev struct. + * @adapter: Pointer to the driver hw structure. + * @q_num: The Q number whose status is to be found. + * + * Return: status: -1 on failure or else queue full/stop is indicated. + */ +int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num) +{ + struct rsi_common *common = adapter->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 buf_status = 0; + int status = 0; + + status = rsi_sdio_read_register(common->priv, + RSI_DEVICE_BUFFER_STATUS_REGISTER, + &buf_status); + + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read status register\n", __func__); + return -1; + } + + if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) { + if (!dev->rx_info.mgmt_buffer_full) + dev->rx_info.mgmt_buf_full_counter++; + dev->rx_info.mgmt_buffer_full = true; + } else { + dev->rx_info.mgmt_buffer_full = false; + } + + if (buf_status & (BIT(PKT_BUFF_FULL))) { + if (!dev->rx_info.buffer_full) + dev->rx_info.buf_full_counter++; + dev->rx_info.buffer_full = true; + } else { + dev->rx_info.buffer_full = false; + } + + if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) { + if (!dev->rx_info.semi_buffer_full) + dev->rx_info.buf_semi_full_counter++; + dev->rx_info.semi_buffer_full = true; + } else { + dev->rx_info.semi_buffer_full = false; + } + + if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full)) + return QUEUE_FULL; + + if (dev->rx_info.buffer_full) + return QUEUE_FULL; + + return QUEUE_NOT_FULL; +} + +/** + * rsi_sdio_determine_event_timeout() - This Function determines the event + * timeout duration. + * @adapter: Pointer to the adapter structure. + * + * Return: timeout duration is returned. + */ +int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + + /* Once buffer full is seen, event timeout to occur every 2 msecs */ + if (dev->rx_info.buffer_full) + return 2; + + return EVENT_WAIT_FOREVER; +} diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c new file mode 100644 index 00000000000..bb1bf96670e --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -0,0 +1,575 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/module.h> +#include "rsi_usb.h" + +/** + * rsi_usb_card_write() - This function writes to the USB Card. + * @adapter: Pointer to the adapter structure. + * @buf: Pointer to the buffer from where the data has to be taken. + * @len: Length to be written. + * @endpoint: Type of endpoint. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_card_write(struct rsi_hw *adapter, + void *buf, + u16 len, + u8 endpoint) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + int status; + s32 transfer; + + status = usb_bulk_msg(dev->usbdev, + usb_sndbulkpipe(dev->usbdev, + dev->bulkout_endpoint_addr[endpoint - 1]), + buf, + len, + &transfer, + HZ * 5); + + if (status < 0) { + rsi_dbg(ERR_ZONE, + "Card write failed with error code :%10d\n", status); + dev->write_fail = 1; + } + return status; +} + +/** + * rsi_write_multiple() - This function writes multiple bytes of information + * to the USB card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_write_multiple(struct rsi_hw *adapter, + u8 endpoint, + u8 *data, + u32 count) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + u8 *seg = dev->tx_buffer; + + if (dev->write_fail) + return 0; + + if (endpoint == MGMT_EP) { + memset(seg, 0, RSI_USB_TX_HEAD_ROOM); + memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count); + } else { + seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM); + } + + return rsi_usb_card_write(adapter, + seg, + count + RSI_USB_TX_HEAD_ROOM, + endpoint); +} + +/** + * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk + * endpoints to the device. + * @interface: Pointer to the USB interface structure. + * @adapter: Pointer to the adapter structure. + * + * Return: ret_val: 0 on success, -ENOMEM on failure. + */ +static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface, + struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + __le16 buffer_size; + int ii, bep_found = 0; + + iface_desc = &(interface->altsetting[0]); + + for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) { + endpoint = &(iface_desc->endpoint[ii].desc); + + if ((!(dev->bulkin_endpoint_addr)) && + (endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + buffer_size = endpoint->wMaxPacketSize; + dev->bulkin_size = buffer_size; + dev->bulkin_endpoint_addr = + endpoint->bEndpointAddress; + } + + if (!dev->bulkout_endpoint_addr[bep_found] && + !(endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + dev->bulkout_endpoint_addr[bep_found] = + endpoint->bEndpointAddress; + buffer_size = endpoint->wMaxPacketSize; + dev->bulkout_size[bep_found] = buffer_size; + bep_found++; + } + + if (bep_found >= MAX_BULK_EP) + break; + } + + if (!(dev->bulkin_endpoint_addr) && + (dev->bulkout_endpoint_addr[0])) + return -EINVAL; + + return 0; +} + +/* rsi_usb_reg_read() - This function reads data from given register address. + * @usbdev: Pointer to the usb_device structure. + * @reg: Address of the register to be read. + * @value: Value to be read. + * @len: length of data to be read. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_reg_read(struct usb_device *usbdev, + u32 reg, + u16 *value, + u16 len) +{ + u8 temp_buf[4]; + int status = 0; + + status = usb_control_msg(usbdev, + usb_rcvctrlpipe(usbdev, 0), + USB_VENDOR_REGISTER_READ, + USB_TYPE_VENDOR, + ((reg & 0xffff0000) >> 16), (reg & 0xffff), + (void *)temp_buf, + len, + HZ * 5); + + *value = (temp_buf[0] | (temp_buf[1] << 8)); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "%s: Reg read failed with error code :%d\n", + __func__, status); + } + return status; +} + +/** + * rsi_usb_reg_write() - This function writes the given data into the given + * register address. + * @usbdev: Pointer to the usb_device structure. + * @reg: Address of the register. + * @value: Value to write. + * @len: Length of data to be written. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_reg_write(struct usb_device *usbdev, + u32 reg, + u16 value, + u16 len) +{ + u8 usb_reg_buf[4]; + int status = 0; + + usb_reg_buf[0] = (value & 0x00ff); + usb_reg_buf[1] = (value & 0xff00) >> 8; + usb_reg_buf[2] = 0x0; + usb_reg_buf[3] = 0x0; + + status = usb_control_msg(usbdev, + usb_sndctrlpipe(usbdev, 0), + USB_VENDOR_REGISTER_WRITE, + USB_TYPE_VENDOR, + ((reg & 0xffff0000) >> 16), + (reg & 0xffff), + (void *)usb_reg_buf, + len, + HZ * 5); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "%s: Reg write failed with error code :%d\n", + __func__, status); + } + return status; +} + +/** + * rsi_rx_done_handler() - This function is called when a packet is received + * from USB stack. This is callback to recieve done. + * @urb: Received URB. + * + * Return: None. + */ +static void rsi_rx_done_handler(struct urb *urb) +{ + struct rsi_hw *adapter = urb->context; + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + if (urb->status) + return; + + rsi_set_event(&dev->rx_thread.event); +} + +/** + * rsi_rx_urb_submit() - This function submits the given URB to the USB stack. + * @adapter: Pointer to the adapter structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_rx_urb_submit(struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + struct urb *urb = dev->rx_usb_urb[0]; + int status; + + usb_fill_bulk_urb(urb, + dev->usbdev, + usb_rcvbulkpipe(dev->usbdev, + dev->bulkin_endpoint_addr), + urb->transfer_buffer, + 3000, + rsi_rx_done_handler, + adapter); + + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__); + + return status; +} + +/** + * rsi_usb_write_register_multiple() - This function writes multiple bytes of + * information to multiple registers. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written on to the registers. + * + * Return: status: 0 on success, -1 on failure. + */ +int rsi_usb_write_register_multiple(struct rsi_hw *adapter, + u32 addr, + u8 *data, + u32 count) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + u8 *buf; + u8 transfer; + int status = 0; + + buf = kzalloc(4096, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + while (count) { + transfer = min_t(int, count, 4096); + memcpy(buf, data, transfer); + status = usb_control_msg(dev->usbdev, + usb_sndctrlpipe(dev->usbdev, 0), + USB_VENDOR_REGISTER_WRITE, + USB_TYPE_VENDOR, + ((addr & 0xffff0000) >> 16), + (addr & 0xffff), + (void *)buf, + transfer, + HZ * 5); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "Reg write failed with error code :%d\n", + status); + } else { + count -= transfer; + data += transfer; + addr += transfer; + } + } + + kfree(buf); + return 0; +} + +/** + *rsi_usb_host_intf_write_pkt() - This function writes the packet to the + * USB card. + * @adapter: Pointer to the adapter structure. + * @pkt: Pointer to the data to be written on to the card. + * @len: Length of the data to be written on to the card. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 len) +{ + u32 queueno = ((pkt[1] >> 4) & 0xf); + u8 endpoint; + + endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP); + + return rsi_write_multiple(adapter, + endpoint, + (u8 *)pkt, + len); +} + +/** + * rsi_deinit_usb_interface() - This function deinitializes the usb interface. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +static void rsi_deinit_usb_interface(struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + rsi_kill_thread(&dev->rx_thread); + kfree(adapter->priv->rx_data_pkt); + kfree(dev->tx_buffer); +} + +/** + * rsi_init_usb_interface() - This function initializes the usb interface. + * @adapter: Pointer to the adapter structure. + * @pfunction: Pointer to USB interface structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_init_usb_interface(struct rsi_hw *adapter, + struct usb_interface *pfunction) +{ + struct rsi_91x_usbdev *rsi_dev; + struct rsi_common *common = adapter->priv; + int status; + + rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL); + if (!rsi_dev) + return -ENOMEM; + + adapter->rsi_dev = rsi_dev; + rsi_dev->usbdev = interface_to_usbdev(pfunction); + + if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter)) + return -EINVAL; + + adapter->device = &pfunction->dev; + usb_set_intfdata(pfunction, adapter); + + common->rx_data_pkt = kmalloc(2048, GFP_KERNEL); + if (!common->rx_data_pkt) { + rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n", + __func__); + return -ENOMEM; + } + + rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC); + rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL); + rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt; + rsi_dev->tx_blk_size = 252; + + /* Initializing function callbacks */ + adapter->rx_urb_submit = rsi_rx_urb_submit; + adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt; + adapter->check_hw_queue_status = rsi_usb_check_queue_status; + adapter->determine_event_timeout = rsi_usb_event_timeout; + + rsi_init_event(&rsi_dev->rx_thread.event); + status = rsi_create_kthread(common, &rsi_dev->rx_thread, + rsi_usb_rx_thread, "RX-Thread"); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__); + goto fail; + } + +#ifdef CONFIG_RSI_DEBUGFS + /* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */ + adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1); +#endif + + rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); + return 0; + +fail: + kfree(rsi_dev->tx_buffer); + kfree(common->rx_data_pkt); + return status; +} + +/** + * rsi_probe() - This function is called by kernel when the driver provided + * Vendor and device IDs are matched. All the initialization + * work is done here. + * @pfunction: Pointer to the USB interface structure. + * @id: Pointer to the usb_device_id structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_probe(struct usb_interface *pfunction, + const struct usb_device_id *id) +{ + struct rsi_hw *adapter; + struct rsi_91x_usbdev *dev; + u16 fw_status; + + rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); + + adapter = rsi_91x_init(); + if (!adapter) { + rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", + __func__); + return 1; + } + + if (rsi_init_usb_interface(adapter, pfunction)) { + rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n", + __func__); + goto err; + } + + rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__); + + dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0) + goto err1; + else + fw_status &= 1; + + if (!fw_status) { + if (rsi_usb_device_init(adapter->priv)) { + rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", + __func__); + goto err1; + } + + if (rsi_usb_reg_write(dev->usbdev, + USB_INTERNAL_REG_1, + RSI_USB_READY_MAGIC_NUM, 1) < 0) + goto err1; + rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__); + } + + if (rsi_rx_urb_submit(adapter)) + goto err1; + + return 0; +err1: + rsi_deinit_usb_interface(adapter); +err: + rsi_91x_deinit(adapter); + rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); + return 1; +} + +/** + * rsi_disconnect() - This function performs the reverse of the probe function, + * it deintialize the driver structure. + * @pfunction: Pointer to the USB interface structure. + * + * Return: None. + */ +static void rsi_disconnect(struct usb_interface *pfunction) +{ + struct rsi_hw *adapter = usb_get_intfdata(pfunction); + + if (!adapter) + return; + + rsi_mac80211_detach(adapter); + rsi_deinit_usb_interface(adapter); + rsi_91x_deinit(adapter); + + rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__); +} + +#ifdef CONFIG_PM +static int rsi_suspend(struct usb_interface *intf, pm_message_t message) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static int rsi_resume(struct usb_interface *intf) +{ + /* Not yet implemented */ + return -ENOSYS; +} +#endif + +static const struct usb_device_id rsi_dev_table[] = { + { USB_DEVICE(0x0303, 0x0100) }, + { USB_DEVICE(0x041B, 0x0301) }, + { USB_DEVICE(0x041B, 0x0201) }, + { USB_DEVICE(0x041B, 0x9330) }, + { /* Blank */}, +}; + +static struct usb_driver rsi_driver = { + .name = "RSI-USB WLAN", + .probe = rsi_probe, + .disconnect = rsi_disconnect, + .id_table = rsi_dev_table, +#ifdef CONFIG_PM + .suspend = rsi_suspend, + .resume = rsi_resume, +#endif +}; + +/** + * rsi_module_init() - This function registers the client driver. + * @void: Void. + * + * Return: 0 on success. + */ +static int rsi_module_init(void) +{ + usb_register(&rsi_driver); + rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__); + return 0; +} + +/** + * rsi_module_exit() - This function unregisters the client driver. + * @void: Void. + * + * Return: None. + */ +static void rsi_module_exit(void) +{ + usb_deregister(&rsi_driver); + rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__); +} + +module_init(rsi_module_init); +module_exit(rsi_module_exit); + +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("Common USB layer for RSI drivers"); +MODULE_SUPPORTED_DEVICE("RSI-91x"); +MODULE_DEVICE_TABLE(usb, rsi_dev_table); +MODULE_FIRMWARE(FIRMWARE_RSI9113); +MODULE_VERSION("0.1"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c new file mode 100644 index 00000000000..1106ce76707 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c @@ -0,0 +1,177 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/firmware.h> +#include "rsi_usb.h" + +/** + * rsi_copy_to_card() - This function includes the actual funtionality of + * copying the TA firmware to the card.Basically this + * function includes opening the TA file,reading the TA + * file and writing their values in blocks of data. + * @common: Pointer to the driver private structure. + * @fw: Pointer to the firmware value to be written. + * @len: length of firmware file. + * @num_blocks: Number of blocks to be written to the card. + * + * Return: 0 on success and -1 on failure. + */ +static int rsi_copy_to_card(struct rsi_common *common, + const u8 *fw, + u32 len, + u32 num_blocks) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + u32 indx, ii; + u32 block_size = dev->tx_blk_size; + u32 lsb_address; + u32 base_address; + + base_address = TA_LOAD_ADDRESS; + + for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) { + lsb_address = base_address; + if (rsi_usb_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load %s blk\n", __func__, + FIRMWARE_RSI9113); + return -EIO; + } + rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii); + base_address += block_size; + } + + if (len % block_size) { + lsb_address = base_address; + if (rsi_usb_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + len % block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load %s blk\n", __func__, + FIRMWARE_RSI9113); + return -EIO; + } + } + rsi_dbg(INIT_ZONE, + "%s: Succesfully loaded %s instructions\n", __func__, + FIRMWARE_RSI9113); + + rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__); + return 0; +} + +/** + * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from + * the USB device. + * @common: Pointer to the driver private structure. + * + * Return: None. + */ +void rsi_usb_rx_thread(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + int status; + + do { + rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER); + + if (atomic_read(&dev->rx_thread.thread_done)) + goto out; + + mutex_lock(&common->tx_rxlock); + status = rsi_read_pkt(common, 0); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__); + mutex_unlock(&common->tx_rxlock); + return; + } + mutex_unlock(&common->tx_rxlock); + rsi_reset_event(&dev->rx_thread.event); + if (adapter->rx_urb_submit(adapter)) { + rsi_dbg(ERR_ZONE, + "%s: Failed in urb submission", __func__); + return; + } + } while (1); + +out: + rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__); + complete_and_exit(&dev->rx_thread.completion, 0); +} + + +/** + * rsi_load_ta_instructions() - This function includes the actual funtionality + * of loading the TA firmware.This function also + * includes opening the TA file,reading the TA + * file and writing their value in blocks of data. + * @common: Pointer to the driver private structure. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_load_ta_instructions(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + const struct firmware *fw_entry = NULL; + u32 block_size = dev->tx_blk_size; + const u8 *fw; + u32 num_blocks, len; + int status = 0; + + status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device); + if (status < 0) { + rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n", + __func__, FIRMWARE_RSI9113); + return status; + } + + fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); + len = fw_entry->size; + + if (len % 4) + len += (4 - (len % 4)); + + num_blocks = (len / block_size); + + rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len); + rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks); + + status = rsi_copy_to_card(common, fw, len, num_blocks); + release_firmware(fw_entry); + return status; +} + +/** + * rsi_device_init() - This Function Initializes The HAL. + * @common: Pointer to the driver private structure. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_usb_device_init(struct rsi_common *common) +{ + if (rsi_load_ta_instructions(common)) + return -EIO; + + return 0; + } diff --git a/drivers/net/wireless/rsi/rsi_boot_params.h b/drivers/net/wireless/rsi/rsi_boot_params.h new file mode 100644 index 00000000000..5e2721f7909 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_boot_params.h @@ -0,0 +1,126 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_BOOTPARAMS_HEADER_H__ +#define __RSI_BOOTPARAMS_HEADER_H__ + +#define CRYSTAL_GOOD_TIME BIT(0) +#define BOOTUP_MODE_INFO BIT(1) +#define WIFI_TAPLL_CONFIGS BIT(5) +#define WIFI_PLL960_CONFIGS BIT(6) +#define WIFI_AFEPLL_CONFIGS BIT(7) +#define WIFI_SWITCH_CLK_CONFIGS BIT(8) + +#define TA_PLL_M_VAL_20 8 +#define TA_PLL_N_VAL_20 1 +#define TA_PLL_P_VAL_20 4 + +#define PLL960_M_VAL_20 0x14 +#define PLL960_N_VAL_20 0 +#define PLL960_P_VAL_20 5 + +#define UMAC_CLK_40MHZ 40 + +#define TA_PLL_M_VAL_40 46 +#define TA_PLL_N_VAL_40 3 +#define TA_PLL_P_VAL_40 3 + +#define PLL960_M_VAL_40 0x14 +#define PLL960_N_VAL_40 0 +#define PLL960_P_VAL_40 5 + +#define UMAC_CLK_20BW \ + (((TA_PLL_M_VAL_20 + 1) * 40) / \ + ((TA_PLL_N_VAL_20 + 1) * (TA_PLL_P_VAL_20 + 1))) +#define VALID_20 \ + (WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS) +#define UMAC_CLK_40BW \ + (((TA_PLL_M_VAL_40 + 1) * 40) / \ + ((TA_PLL_N_VAL_40 + 1) * (TA_PLL_P_VAL_40 + 1))) +#define VALID_40 \ + (WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS | \ + WIFI_TAPLL_CONFIGS | CRYSTAL_GOOD_TIME | BOOTUP_MODE_INFO) + +/* structure to store configs related to TAPLL programming */ +struct tapll_info { + __le16 pll_reg_1; + __le16 pll_reg_2; +} __packed; + +/* structure to store configs related to PLL960 programming */ +struct pll960_info { + __le16 pll_reg_1; + __le16 pll_reg_2; + __le16 pll_reg_3; +} __packed; + +/* structure to store configs related to AFEPLL programming */ +struct afepll_info { + __le16 pll_reg; +} __packed; + +/* structure to store configs related to pll configs */ +struct pll_config { + struct tapll_info tapll_info_g; + struct pll960_info pll960_info_g; + struct afepll_info afepll_info_g; +} __packed; + +/* structure to store configs related to UMAC clk programming */ +struct switch_clk { + __le16 switch_clk_info; + /* If switch_bbp_lmac_clk_reg is set then this value will be programmed + * into reg + */ + __le16 bbp_lmac_clk_reg_val; + /* if switch_umac_clk is set then this value will be programmed */ + __le16 umac_clock_reg_config; + /* if switch_qspi_clk is set then this value will be programmed */ + __le16 qspi_uart_clock_reg_config; +} __packed; + +struct device_clk_info { + struct pll_config pll_config_g; + struct switch_clk switch_clk_g; +} __packed; + +struct bootup_params { + __le16 magic_number; + __le16 crystal_good_time; + __le32 valid; + __le32 reserved_for_valids; + __le16 bootup_mode_info; + /* configuration used for digital loop back */ + __le16 digital_loop_back_params; + __le16 rtls_timestamp_en; + __le16 host_spi_intr_cfg; + struct device_clk_info device_clk_info[3]; + /* ulp buckboost wait time */ + __le32 buckboost_wakeup_cnt; + /* pmu wakeup wait time & WDT EN info */ + __le16 pmu_wakeup_wait; + u8 shutdown_wait_time; + /* Sleep clock source selection */ + u8 pmu_slp_clkout_sel; + /* WDT programming values */ + __le32 wdt_prog_value; + /* WDT soc reset delay */ + __le32 wdt_soc_rst_delay; + /* dcdc modes configs */ + __le32 dcdc_operation_mode; + __le32 soc_reset_wait_cnt; +} __packed; +#endif diff --git a/drivers/net/wireless/rsi/rsi_common.h b/drivers/net/wireless/rsi/rsi_common.h new file mode 100644 index 00000000000..f2f70784d4a --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_common.h @@ -0,0 +1,87 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_COMMON_H__ +#define __RSI_COMMON_H__ + +#include <linux/kthread.h> + +#define EVENT_WAIT_FOREVER 0 +#define TA_LOAD_ADDRESS 0x00 +#define FIRMWARE_RSI9113 "rsi_91x.fw" +#define QUEUE_NOT_FULL 1 +#define QUEUE_FULL 0 + +static inline int rsi_init_event(struct rsi_event *pevent) +{ + atomic_set(&pevent->event_condition, 1); + init_waitqueue_head(&pevent->event_queue); + return 0; +} + +static inline int rsi_wait_event(struct rsi_event *event, u32 timeout) +{ + int status = 0; + + if (!timeout) + status = wait_event_interruptible(event->event_queue, + (atomic_read(&event->event_condition) == 0)); + else + status = wait_event_interruptible_timeout(event->event_queue, + (atomic_read(&event->event_condition) == 0), + timeout); + return status; +} + +static inline void rsi_set_event(struct rsi_event *event) +{ + atomic_set(&event->event_condition, 0); + wake_up_interruptible(&event->event_queue); +} + +static inline void rsi_reset_event(struct rsi_event *event) +{ + atomic_set(&event->event_condition, 1); +} + +static inline int rsi_create_kthread(struct rsi_common *common, + struct rsi_thread *thread, + void *func_ptr, + u8 *name) +{ + init_completion(&thread->completion); + thread->task = kthread_run(func_ptr, common, name); + if (IS_ERR(thread->task)) + return (int)PTR_ERR(thread->task); + + return 0; +} + +static inline int rsi_kill_thread(struct rsi_thread *handle) +{ + atomic_inc(&handle->thread_done); + rsi_set_event(&handle->event); + + wait_for_completion(&handle->completion); + return kthread_stop(handle->task); +} + +void rsi_mac80211_detach(struct rsi_hw *hw); +u16 rsi_get_connected_channel(struct rsi_hw *adapter); +struct rsi_hw *rsi_91x_init(void); +void rsi_91x_deinit(struct rsi_hw *adapter); +int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len); +#endif diff --git a/drivers/net/wireless/rsi/rsi_debugfs.h b/drivers/net/wireless/rsi/rsi_debugfs.h new file mode 100644 index 00000000000..580ad3b3f71 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_debugfs.h @@ -0,0 +1,48 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_DEBUGFS_H__ +#define __RSI_DEBUGFS_H__ + +#include "rsi_main.h" +#include <linux/debugfs.h> + +#ifndef CONFIG_RSI_DEBUGFS +static inline int rsi_init_dbgfs(struct rsi_hw *adapter) +{ + return 0; +} + +static inline void rsi_remove_dbgfs(struct rsi_hw *adapter) +{ + return; +} +#else +struct rsi_dbg_files { + const char *name; + umode_t perms; + const struct file_operations fops; +}; + +struct rsi_debugfs { + struct dentry *subdir; + struct rsi_dbg_ops *dfs_get_ops; + struct dentry *rsi_files[MAX_DEBUGFS_ENTRIES]; +}; +int rsi_init_dbgfs(struct rsi_hw *adapter); +void rsi_remove_dbgfs(struct rsi_hw *adapter); +#endif +#endif diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h new file mode 100644 index 00000000000..bebdc2ae6c5 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_main.h @@ -0,0 +1,232 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_MAIN_H__ +#define __RSI_MAIN_H__ + +#include <linux/string.h> +#include <linux/skbuff.h> +#include <net/mac80211.h> + +#define ERR_ZONE BIT(0) /* For Error Msgs */ +#define INFO_ZONE BIT(1) /* For General Status Msgs */ +#define INIT_ZONE BIT(2) /* For Driver Init Seq Msgs */ +#define MGMT_TX_ZONE BIT(3) /* For TX Mgmt Path Msgs */ +#define MGMT_RX_ZONE BIT(4) /* For RX Mgmt Path Msgs */ +#define DATA_TX_ZONE BIT(5) /* For TX Data Path Msgs */ +#define DATA_RX_ZONE BIT(6) /* For RX Data Path Msgs */ +#define FSM_ZONE BIT(7) /* For State Machine Msgs */ +#define ISR_ZONE BIT(8) /* For Interrupt Msgs */ + +#define FSM_CARD_NOT_READY 0 +#define FSM_BOOT_PARAMS_SENT 1 +#define FSM_EEPROM_READ_MAC_ADDR 2 +#define FSM_RESET_MAC_SENT 3 +#define FSM_RADIO_CAPS_SENT 4 +#define FSM_BB_RF_PROG_SENT 5 +#define FSM_MAC_INIT_DONE 6 + +extern u32 rsi_zone_enabled; + +static inline void rsi_dbg(u32 zone, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (zone & rsi_zone_enabled) + pr_info("%pV", &vaf); + va_end(args); +} + +#define RSI_MAX_VIFS 1 +#define NUM_EDCA_QUEUES 4 +#define IEEE80211_ADDR_LEN 6 +#define FRAME_DESC_SZ 16 +#define MIN_802_11_HDR_LEN 24 + +#define DATA_QUEUE_WATER_MARK 400 +#define MIN_DATA_QUEUE_WATER_MARK 300 +#define MULTICAST_WATER_MARK 200 +#define MAC_80211_HDR_FRAME_CONTROL 0 +#define WME_NUM_AC 4 +#define NUM_SOFT_QUEUES 5 +#define MAX_HW_QUEUES 8 +#define INVALID_QUEUE 0xff +#define MAX_CONTINUOUS_VO_PKTS 8 +#define MAX_CONTINUOUS_VI_PKTS 4 + +/* Queue information */ +#define RSI_WIFI_MGMT_Q 0x4 +#define RSI_WIFI_DATA_Q 0x5 +#define IEEE80211_MGMT_FRAME 0x00 +#define IEEE80211_CTL_FRAME 0x04 + +#define IEEE80211_QOS_TID 0x0f +#define IEEE80211_NONQOS_TID 16 + +#define MAX_DEBUGFS_ENTRIES 4 + +#define TID_TO_WME_AC(_tid) ( \ + ((_tid) == 0 || (_tid) == 3) ? BE_Q : \ + ((_tid) < 3) ? BK_Q : \ + ((_tid) < 6) ? VI_Q : \ + VO_Q) + +#define WME_AC(_q) ( \ + ((_q) == BK_Q) ? IEEE80211_AC_BK : \ + ((_q) == BE_Q) ? IEEE80211_AC_BE : \ + ((_q) == VI_Q) ? IEEE80211_AC_VI : \ + IEEE80211_AC_VO) + +struct version_info { + u16 major; + u16 minor; + u16 release_num; + u16 patch_num; +} __packed; + +struct skb_info { + s8 rssi; + u32 flags; + u16 channel; + s8 tid; + s8 sta_id; +}; + +enum edca_queue { + BK_Q, + BE_Q, + VI_Q, + VO_Q, + MGMT_SOFT_Q +}; + +struct security_info { + bool security_enable; + u32 ptk_cipher; + u32 gtk_cipher; +}; + +struct wmm_qinfo { + s32 weight; + s32 wme_params; + s32 pkt_contended; +}; + +struct transmit_q_stats { + u32 total_tx_pkt_send[NUM_EDCA_QUEUES + 1]; + u32 total_tx_pkt_freed[NUM_EDCA_QUEUES + 1]; +}; + +struct vif_priv { + bool is_ht; + bool sgi; + u16 seq_start; +}; + +struct rsi_event { + atomic_t event_condition; + wait_queue_head_t event_queue; +}; + +struct rsi_thread { + void (*thread_function)(void *); + struct completion completion; + struct task_struct *task; + struct rsi_event event; + atomic_t thread_done; +}; + +struct rsi_hw; + +struct rsi_common { + struct rsi_hw *priv; + struct vif_priv vif_info[RSI_MAX_VIFS]; + + bool mgmt_q_block; + struct version_info driver_ver; + struct version_info fw_ver; + + struct rsi_thread tx_thread; + struct sk_buff_head tx_queue[NUM_EDCA_QUEUES + 1]; + /* Mutex declaration */ + struct mutex mutex; + /* Mutex used between tx/rx threads */ + struct mutex tx_rxlock; + u8 endpoint; + + /* Channel/band related */ + u8 band; + u8 channel_width; + + u16 rts_threshold; + u16 bitrate_mask[2]; + u32 fixedrate_mask[2]; + + u8 rf_reset; + struct transmit_q_stats tx_stats; + struct security_info secinfo; + struct wmm_qinfo tx_qinfo[NUM_EDCA_QUEUES]; + struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES]; + u8 mac_addr[IEEE80211_ADDR_LEN]; + + /* state related */ + u32 fsm_state; + bool init_done; + u8 bb_rf_prog_count; + bool iface_down; + + /* Generic */ + u8 channel; + u8 *rx_data_pkt; + u8 mac_id; + u8 radio_id; + u16 rate_pwr[20]; + u16 min_rate; + + /* WMM algo related */ + u8 selected_qnum; + u32 pkt_cnt; + u8 min_weight; +}; + +struct rsi_hw { + struct rsi_common *priv; + struct ieee80211_hw *hw; + struct ieee80211_vif *vifs[RSI_MAX_VIFS]; + struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES]; + struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; + + struct device *device; + u8 sc_nvifs; + +#ifdef CONFIG_RSI_DEBUGFS + struct rsi_debugfs *dfsentry; + u8 num_debugfs_entries; +#endif + void *rsi_dev; + int (*host_intf_read_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len); + int (*host_intf_write_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len); + int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num); + int (*rx_urb_submit)(struct rsi_hw *adapter); + int (*determine_event_timeout)(struct rsi_hw *adapter); +}; +#endif diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h new file mode 100644 index 00000000000..ac67c4ad63c --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_mgmt.h @@ -0,0 +1,285 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_MGMT_H__ +#define __RSI_MGMT_H__ + +#include <linux/sort.h> +#include "rsi_boot_params.h" +#include "rsi_main.h" + +#define MAX_MGMT_PKT_SIZE 512 +#define RSI_NEEDED_HEADROOM 80 +#define RSI_RCV_BUFFER_LEN 2000 + +#define RSI_11B_MODE 0 +#define RSI_11G_MODE BIT(7) +#define RETRY_COUNT 8 +#define RETRY_LONG 4 +#define RETRY_SHORT 7 +#define WMM_SHORT_SLOT_TIME 9 +#define SIFS_DURATION 16 + +#define KEY_TYPE_CLEAR 0 +#define RSI_PAIRWISE_KEY 1 +#define RSI_GROUP_KEY 2 + +/* EPPROM_READ_ADDRESS */ +#define WLAN_MAC_EEPROM_ADDR 40 +#define WLAN_MAC_MAGIC_WORD_LEN 0x01 +#define WLAN_HOST_MODE_LEN 0x04 +#define WLAN_FW_VERSION_LEN 0x08 +#define MAGIC_WORD 0x5A + +/* Receive Frame Types */ +#define TA_CONFIRM_TYPE 0x01 +#define RX_DOT11_MGMT 0x02 +#define TX_STATUS_IND 0x04 +#define PROBEREQ_CONFIRM 2 +#define CARD_READY_IND 0x00 + +#define RSI_DELETE_PEER 0x0 +#define RSI_ADD_PEER 0x1 +#define START_AMPDU_AGGR 0x1 +#define STOP_AMPDU_AGGR 0x0 +#define INTERNAL_MGMT_PKT 0x99 + +#define PUT_BBP_RESET 0 +#define BBP_REG_WRITE 0 +#define RF_RESET_ENABLE BIT(3) +#define RATE_INFO_ENABLE BIT(0) +#define RSI_BROADCAST_PKT BIT(9) + +#define UPPER_20_ENABLE (0x2 << 12) +#define LOWER_20_ENABLE (0x4 << 12) +#define FULL40M_ENABLE 0x6 + +#define RSI_LMAC_CLOCK_80MHZ 0x1 +#define RSI_ENABLE_40MHZ (0x1 << 3) + +#define RX_BA_INDICATION 1 +#define RSI_TBL_SZ 40 +#define MAX_RETRIES 8 + +#define STD_RATE_MCS7 0x07 +#define STD_RATE_MCS6 0x06 +#define STD_RATE_MCS5 0x05 +#define STD_RATE_MCS4 0x04 +#define STD_RATE_MCS3 0x03 +#define STD_RATE_MCS2 0x02 +#define STD_RATE_MCS1 0x01 +#define STD_RATE_MCS0 0x00 +#define STD_RATE_54 0x6c +#define STD_RATE_48 0x60 +#define STD_RATE_36 0x48 +#define STD_RATE_24 0x30 +#define STD_RATE_18 0x24 +#define STD_RATE_12 0x18 +#define STD_RATE_11 0x16 +#define STD_RATE_09 0x12 +#define STD_RATE_06 0x0C +#define STD_RATE_5_5 0x0B +#define STD_RATE_02 0x04 +#define STD_RATE_01 0x02 + +#define RSI_RF_TYPE 1 +#define RSI_RATE_00 0x00 +#define RSI_RATE_1 0x0 +#define RSI_RATE_2 0x2 +#define RSI_RATE_5_5 0x4 +#define RSI_RATE_11 0x6 +#define RSI_RATE_6 0x8b +#define RSI_RATE_9 0x8f +#define RSI_RATE_12 0x8a +#define RSI_RATE_18 0x8e +#define RSI_RATE_24 0x89 +#define RSI_RATE_36 0x8d +#define RSI_RATE_48 0x88 +#define RSI_RATE_54 0x8c +#define RSI_RATE_MCS0 0x100 +#define RSI_RATE_MCS1 0x101 +#define RSI_RATE_MCS2 0x102 +#define RSI_RATE_MCS3 0x103 +#define RSI_RATE_MCS4 0x104 +#define RSI_RATE_MCS5 0x105 +#define RSI_RATE_MCS6 0x106 +#define RSI_RATE_MCS7 0x107 +#define RSI_RATE_MCS7_SG 0x307 + +#define BW_20MHZ 0 +#define BW_40MHZ 1 + +#define RSI_SUPP_FILTERS (FIF_ALLMULTI | FIF_PROBE_REQ |\ + FIF_BCN_PRBRESP_PROMISC) +enum opmode { + STA_OPMODE = 1, + AP_OPMODE = 2 +}; + +extern struct ieee80211_rate rsi_rates[12]; +extern const u16 rsi_mcsrates[8]; + +enum sta_notify_events { + STA_CONNECTED = 0, + STA_DISCONNECTED, + STA_TX_ADDBA_DONE, + STA_TX_DELBA, + STA_RX_ADDBA_DONE, + STA_RX_DELBA +}; + +/* Send Frames Types */ +enum cmd_frame_type { + TX_DOT11_MGMT, + RESET_MAC_REQ, + RADIO_CAPABILITIES, + BB_PROG_VALUES_REQUEST, + RF_PROG_VALUES_REQUEST, + WAKEUP_SLEEP_REQUEST, + SCAN_REQUEST, + TSF_UPDATE, + PEER_NOTIFY, + BLOCK_UNBLOCK, + SET_KEY_REQ, + AUTO_RATE_IND, + BOOTUP_PARAMS_REQUEST, + VAP_CAPABILITIES, + EEPROM_READ_TYPE , + EEPROM_WRITE, + GPIO_PIN_CONFIG , + SET_RX_FILTER, + AMPDU_IND, + STATS_REQUEST_FRAME, + BB_BUF_PROG_VALUES_REQ, + BBP_PROG_IN_TA, + BG_SCAN_PARAMS, + BG_SCAN_PROBE_REQ, + CW_MODE_REQ, + PER_CMD_PKT +}; + +struct rsi_mac_frame { + __le16 desc_word[8]; +} __packed; + +struct rsi_boot_params { + __le16 desc_word[8]; + struct bootup_params bootup_params; +} __packed; + +struct rsi_peer_notify { + __le16 desc_word[8]; + u8 mac_addr[6]; + __le16 command; + __le16 mpdu_density; + __le16 reserved; + __le32 sta_flags; +} __packed; + +struct rsi_vap_caps { + __le16 desc_word[8]; + u8 mac_addr[6]; + __le16 keep_alive_period; + u8 bssid[6]; + __le16 reserved; + __le32 flags; + __le16 frag_threshold; + __le16 rts_threshold; + __le32 default_mgmt_rate; + __le32 default_ctrl_rate; + __le32 default_data_rate; + __le16 beacon_interval; + __le16 dtim_period; +} __packed; + +struct rsi_set_key { + __le16 desc_word[8]; + u8 key[4][32]; + u8 tx_mic_key[8]; + u8 rx_mic_key[8]; +} __packed; + +struct rsi_auto_rate { + __le16 desc_word[8]; + __le16 failure_limit; + __le16 initial_boundary; + __le16 max_threshold_limt; + __le16 num_supported_rates; + __le16 aarf_rssi; + __le16 moderate_rate_inx; + __le16 collision_tolerance; + __le16 supported_rates[40]; +} __packed; + +struct qos_params { + __le16 cont_win_min_q; + __le16 cont_win_max_q; + __le16 aifsn_val_q; + __le16 txop_q; +} __packed; + +struct rsi_radio_caps { + __le16 desc_word[8]; + struct qos_params qos_params[MAX_HW_QUEUES]; + u8 num_11n_rates; + u8 num_11ac_rates; + __le16 gcpd_per_rate[20]; +} __packed; + +static inline u32 rsi_get_queueno(u8 *addr, u16 offset) +{ + return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12; +} + +static inline u32 rsi_get_length(u8 *addr, u16 offset) +{ + return (le16_to_cpu(*(__le16 *)&addr[offset])) & 0x0fff; +} + +static inline u8 rsi_get_extended_desc(u8 *addr, u16 offset) +{ + return le16_to_cpu(*((__le16 *)&addr[offset + 4])) & 0x00ff; +} + +static inline u8 rsi_get_rssi(u8 *addr) +{ + return *(u8 *)(addr + FRAME_DESC_SZ); +} + +static inline u8 rsi_get_channel(u8 *addr) +{ + return *(char *)(addr + 15); +} + +int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg); +int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode); +int rsi_send_aggregation_params_frame(struct rsi_common *common, u16 tid, + u16 ssn, u8 buf_size, u8 event); +int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len, + u8 key_type, u8 key_id, u32 cipher); +int rsi_set_channel(struct rsi_common *common, u16 chno); +void rsi_inform_bss_status(struct rsi_common *common, u8 status, + const u8 *bssid, u8 qos_enable, u16 aid); +void rsi_indicate_pkt_to_os(struct rsi_common *common, struct sk_buff *skb); +int rsi_mac80211_attach(struct rsi_common *common); +void rsi_indicate_tx_status(struct rsi_hw *common, struct sk_buff *skb, + int status); +bool rsi_is_cipher_wep(struct rsi_common *common); +void rsi_core_qos_processor(struct rsi_common *common); +void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb); +int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb); +int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb); +#endif diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h new file mode 100644 index 00000000000..df4b5e20e05 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_sdio.h @@ -0,0 +1,129 @@ +/** + * @section LICENSE + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#ifndef __RSI_SDIO_INTF__ +#define __RSI_SDIO_INTF__ + +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio_ids.h> +#include "rsi_main.h" + +enum sdio_interrupt_type { + BUFFER_FULL = 0x0, + BUFFER_AVAILABLE = 0x1, + FIRMWARE_ASSERT_IND = 0x3, + MSDU_PACKET_PENDING = 0x4, + UNKNOWN_INT = 0XE +}; + +/* Buffer status register related info */ +#define PKT_BUFF_SEMI_FULL 0 +#define PKT_BUFF_FULL 1 +#define PKT_MGMT_BUFF_FULL 2 +#define MSDU_PKT_PENDING 3 +/* Interrupt Bit Related Macros */ +#define PKT_BUFF_AVAILABLE 0 +#define FW_ASSERT_IND 2 + +#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3 +#define RSI_FN1_INT_REGISTER 0xf9 +#define RSI_SD_REQUEST_MASTER 0x10000 + +/* FOR SD CARD ONLY */ +#define SDIO_RX_NUM_BLOCKS_REG 0x000F1 +#define SDIO_FW_STATUS_REG 0x000F2 +#define SDIO_NXT_RD_DELAY2 0x000F5 +#define SDIO_MASTER_ACCESS_MSBYTE 0x000FA +#define SDIO_MASTER_ACCESS_LSBYTE 0x000FB +#define SDIO_READ_START_LVL 0x000FC +#define SDIO_READ_FIFO_CTL 0x000FD +#define SDIO_WRITE_FIFO_CTL 0x000FE +#define SDIO_FUN1_INTR_CLR_REG 0x0008 +#define SDIO_REG_HIGH_SPEED 0x0013 + +#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE) \ + { \ + TYPE = \ + (_I & (1 << PKT_BUFF_AVAILABLE)) ? \ + BUFFER_AVAILABLE : \ + (_I & (1 << MSDU_PKT_PENDING)) ? \ + MSDU_PACKET_PENDING : \ + (_I & (1 << FW_ASSERT_IND)) ? \ + FIRMWARE_ASSERT_IND : UNKNOWN_INT; \ + } + +/* common registers in SDIO function1 */ +#define TA_SOFT_RESET_REG 0x0004 +#define TA_TH0_PC_REG 0x0400 +#define TA_HOLD_THREAD_REG 0x0844 +#define TA_RELEASE_THREAD_REG 0x0848 + +#define TA_SOFT_RST_CLR 0 +#define TA_SOFT_RST_SET BIT(0) +#define TA_PC_ZERO 0 +#define TA_HOLD_THREAD_VALUE cpu_to_le32(0xF) +#define TA_RELEASE_THREAD_VALUE cpu_to_le32(0xF) +#define TA_BASE_ADDR 0x2200 +#define MISC_CFG_BASE_ADDR 0x4150 + +struct receive_info { + bool buffer_full; + bool semi_buffer_full; + bool mgmt_buffer_full; + u32 mgmt_buf_full_counter; + u32 buf_semi_full_counter; + u8 watch_bufferfull_count; + u32 sdio_intr_status_zero; + u32 sdio_int_counter; + u32 total_sdio_msdu_pending_intr; + u32 total_sdio_unknown_intr; + u32 buf_full_counter; + u32 buf_avilable_counter; +}; + +struct rsi_91x_sdiodev { + struct sdio_func *pfunction; + struct task_struct *in_sdio_litefi_irq; + struct receive_info rx_info; + u32 next_read_delay; + u32 sdio_high_speed_enable; + u8 sdio_clock_speed; + u32 cardcapability; + u8 prev_desc[16]; + u32 tx_blk_size; + u8 write_fail; +}; + +void rsi_interrupt_handler(struct rsi_hw *adapter); +int rsi_init_sdio_slave_regs(struct rsi_hw *adapter); +int rsi_sdio_device_init(struct rsi_common *common); +int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data); +int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length); +int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function, + u32 addr, u8 *data); +int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr, + u8 *data, u32 count); +void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit); +int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter); +int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num); +#endif diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h new file mode 100644 index 00000000000..ebea0c411ea --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_usb.h @@ -0,0 +1,68 @@ +/** + * @section LICENSE + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_USB_INTF__ +#define __RSI_USB_INTF__ + +#include <linux/usb.h> +#include "rsi_main.h" +#include "rsi_common.h" + +#define USB_INTERNAL_REG_1 0x25000 +#define RSI_USB_READY_MAGIC_NUM 0xab +#define FW_STATUS_REG 0x41050012 + +#define USB_VENDOR_REGISTER_READ 0x15 +#define USB_VENDOR_REGISTER_WRITE 0x16 +#define RSI_USB_TX_HEAD_ROOM 128 + +#define MAX_RX_URBS 1 +#define MAX_BULK_EP 8 +#define MGMT_EP 1 +#define DATA_EP 2 + +struct rsi_91x_usbdev { + struct rsi_thread rx_thread; + u8 endpoint; + struct usb_device *usbdev; + struct usb_interface *pfunction; + struct urb *rx_usb_urb[MAX_RX_URBS]; + u8 *tx_buffer; + __le16 bulkin_size; + u8 bulkin_endpoint_addr; + __le16 bulkout_size[MAX_BULK_EP]; + u8 bulkout_endpoint_addr[MAX_BULK_EP]; + u32 tx_blk_size; + u8 write_fail; +}; + +static inline int rsi_usb_check_queue_status(struct rsi_hw *adapter, u8 q_num) +{ + /* In USB, there isn't any need to check the queue status */ + return QUEUE_NOT_FULL; +} + +static inline int rsi_usb_event_timeout(struct rsi_hw *adapter) +{ + return EVENT_WAIT_FOREVER; +} + +int rsi_usb_device_init(struct rsi_common *common); +int rsi_usb_write_register_multiple(struct rsi_hw *adapter, u32 addr, + u8 *data, u32 count); +void rsi_usb_rx_thread(struct rsi_common *common); +#endif |