diff options
| -rw-r--r-- | arch/arm64/boot/dts/apm-storm.dtsi | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index 6d4f493aac9..93f4b2dd924 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -218,6 +218,45 @@ enable-offset = <0x0>; enable-mask = <0x06>; }; + + sata01clk: sata01clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata01clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata23clk: sata23clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata23clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata45clk: sata45clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata45clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; }; serial0: serial@1c020000 { @@ -259,5 +298,46 @@ apm,tx-boost-gain = <31 31 31 31 31 31>; apm,tx-eye-tuning = <2 10 10 2 10 10>; }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>, + <0x0 0x1f217000 0x0 0x1000>; + interrupts = <0x0 0x86 0x4>; + status = "disabled"; + clocks = <&sata01clk 0>; + phys = <&phy1 0>; + phy-names = "sata-phy"; + }; + + sata2: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>, + <0x0 0x1f227000 0x0 0x1000>; + interrupts = <0x0 0x87 0x4>; + status = "ok"; + clocks = <&sata23clk 0>; + phys = <&phy2 0>; + phy-names = "sata-phy"; + }; + + sata3: sata@1a800000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a800000 0x0 0x1000>, + <0x0 0x1f230000 0x0 0x1000>, + <0x0 0x1f23d000 0x0 0x1000>, + <0x0 0x1f23e000 0x0 0x1000>; + interrupts = <0x0 0x88 0x4>; + status = "ok"; + clocks = <&sata45clk 0>; + phys = <&phy3 0>; + phy-names = "sata-phy"; + }; }; }; |