diff options
-rw-r--r-- | drivers/char/tpm/tpm_infineon.c | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 24095f6ee6d..90cae8f9fe2 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -104,7 +104,7 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) if (clear_wrfifo) { for (i = 0; i < 4096; i++) { - status = inb(chip->vendor->base + WRFIFO); + status = inb(chip->vendor.base + WRFIFO); if (status == 0xff) { if (check == 5) break; @@ -124,8 +124,8 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) */ i = 0; do { - status = inb(chip->vendor->base + RDFIFO); - status = inb(chip->vendor->base + STAT); + status = inb(chip->vendor.base + RDFIFO); + status = inb(chip->vendor.base + STAT); i++; if (i == TPM_MAX_TRIES) return -EIO; @@ -138,7 +138,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) int status; int i; for (i = 0; i < TPM_MAX_TRIES; i++) { - status = inb(chip->vendor->base + STAT); + status = inb(chip->vendor.base + STAT); /* check the status-register if wait_for_bit is set */ if (status & 1 << wait_for_bit) break; @@ -157,7 +157,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) { wait(chip, STAT_XFE); - outb(sendbyte, chip->vendor->base + WRFIFO); + outb(sendbyte, chip->vendor.base + WRFIFO); } /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more @@ -204,7 +204,7 @@ recv_begin: ret = wait(chip, STAT_RDA); if (ret) return -EIO; - buf[i] = inb(chip->vendor->base + RDFIFO); + buf[i] = inb(chip->vendor.base + RDFIFO); } if (buf[0] != TPM_VL_VER) { @@ -219,7 +219,7 @@ recv_begin: for (i = 0; i < size; i++) { wait(chip, STAT_RDA); - buf[i] = inb(chip->vendor->base + RDFIFO); + buf[i] = inb(chip->vendor.base + RDFIFO); } if ((size == 0x6D00) && (buf[1] == 0x80)) { @@ -268,7 +268,7 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) u8 count_high, count_low, count_4, count_3, count_2, count_1; /* Disabling Reset, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD); + outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD); ret = empty_fifo(chip, 1); if (ret) { @@ -319,7 +319,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip) static u8 tpm_inf_status(struct tpm_chip *chip) { - return inb(chip->vendor->base + STAT); + return inb(chip->vendor.base + STAT); } static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); @@ -346,7 +346,7 @@ static struct file_operations inf_ops = { .release = tpm_release, }; -static struct tpm_vendor_specific tpm_inf = { +static const struct tpm_vendor_specific tpm_inf = { .recv = tpm_inf_recv, .send = tpm_inf_send, .cancel = tpm_inf_cancel, @@ -375,6 +375,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, int version[2]; int productid[2]; char chipname[20]; + struct tpm_chip *chip; /* read IO-ports through PnP */ if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && @@ -395,14 +396,13 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, goto err_last; } /* publish my base address and request region */ - tpm_inf.base = TPM_INF_BASE; if (request_region - (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { + (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { rc = -EINVAL; goto err_last; } - if (request_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN, - "tpm_infineon0") == NULL) { + if (request_region + (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) { rc = -EINVAL; goto err_last; } @@ -442,9 +442,9 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, /* configure TPM with IO-ports */ outb(IOLIMH, TPM_INF_ADDR); - outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA); + outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA); outb(IOLIML, TPM_INF_ADDR); - outb((tpm_inf.base & 0xff), TPM_INF_DATA); + outb((TPM_INF_BASE & 0xff), TPM_INF_DATA); /* control if IO-ports are set correctly */ outb(IOLIMH, TPM_INF_ADDR); @@ -452,10 +452,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, outb(IOLIML, TPM_INF_ADDR); iol = inb(TPM_INF_DATA); - if ((ioh << 8 | iol) != tpm_inf.base) { + if ((ioh << 8 | iol) != TPM_INF_BASE) { dev_err(&dev->dev, - "Could not set IO-ports to 0x%lx\n", - tpm_inf.base); + "Could not set IO-ports to 0x%x\n", + TPM_INF_BASE); rc = -EIO; goto err_release_region; } @@ -466,15 +466,15 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); /* disable RESET, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD); + outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD); /* Finally, we're done, print some infos */ dev_info(&dev->dev, "TPM found: " "config base 0x%x, " "io base 0x%x, " - "chip version %02x%02x, " - "vendor id %x%x (Infineon), " - "product id %02x%02x" + "chip version 0x%02x%02x, " + "vendor id 0x%x%x (Infineon), " + "product id 0x%02x%02x" "%s\n", TPM_INF_ADDR, TPM_INF_BASE, @@ -482,11 +482,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, vendorid[0], vendorid[1], productid[0], productid[1], chipname); - rc = tpm_register_hardware(&dev->dev, &tpm_inf); - if (rc < 0) { - rc = -ENODEV; + if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) { goto err_release_region; } + chip->vendor.base = TPM_INF_BASE; return 0; } else { rc = -ENODEV; @@ -494,7 +493,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, } err_release_region: - release_region(tpm_inf.base, TPM_INF_PORT_LEN); + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); err_last: @@ -506,7 +505,8 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) struct tpm_chip *chip = pnp_get_drvdata(dev); if (chip) { - release_region(chip->vendor->base, TPM_INF_PORT_LEN); + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); + release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); tpm_remove_hardware(chip->dev); } } @@ -538,5 +538,5 @@ module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); -MODULE_VERSION("1.7"); +MODULE_VERSION("1.8"); MODULE_LICENSE("GPL"); |