diff options
| -rw-r--r-- | drivers/media/usb/em28xx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx-cards.c | 35 | ||||
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx-dvb.c | 53 | ||||
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx.h | 1 |
4 files changed, 91 insertions, 0 deletions
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index ca5ee6aceb6..d6ba514d31e 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -49,6 +49,8 @@ config VIDEO_EM28XX_DVB select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB cards based on the Empiatech em28xx chips. diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 5da60da516c..36853f16bf9 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -356,6 +356,28 @@ static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { { -1, -1, -1, -1}, }; +/* + * 2013:0258 PCTV DVB-S2 Stick (461e) + * GPIO 0 = POWER_ON + * GPIO 1 = BOOST + * GPIO 2 = VUV_LNB (red LED) + * GPIO 3 = #EXT_12V + * GPIO 4 = INT_DEM + * GPIO 5 = INT_LNB + * GPIO 6 = #RESET_DEM + * GPIO 7 = P07_LED (green LED) + */ +static struct em28xx_reg_seq pctv_461e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, + {0x0d, 0xff, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ + {0x0d, 0x42, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, + {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ + { -1, -1, -1, -1}, +}; + #if 0 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, @@ -2125,6 +2147,17 @@ struct em28xx_board em28xx_boards[] = { .buttons = speedlink_vad_laplace_buttons, .leds = speedlink_vad_laplace_leds, }, + /* 2013:0258 PCTV DVB-S2 Stick (461e) + * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ + [EM28178_BOARD_PCTV_461E] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (461e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_461e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -2294,6 +2327,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, { USB_DEVICE(0x1ae7, 0x9004), .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, + { USB_DEVICE(0x2013, 0x0258), + .driver_info = EM28178_BOARD_PCTV_461E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 344042bb845..4f8f687ea99 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -51,6 +51,8 @@ #include "a8293.h" #include "qt1010.h" #include "mb86a20s.h" +#include "m88ds3103.h" +#include "m88ts2022.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); @@ -808,6 +810,19 @@ static struct tda18271_config c3tech_duo_tda18271_config = { .small_i2c = TDA18271_03_BYTE_CHUNK_INIT, }; +static const struct m88ds3103_config pctv_461e_m88ds3103_config = { + .i2c_addr = 0x68, + .clock = 27000000, + .i2c_wr_max = 33, + .clock_out = 0, + .ts_mode = M88DS3103_TS_PARALLEL_16, + .agc = 0x99, +}; + +static const struct m88ts2022_config em28xx_m88ts2022_config = { + .i2c_addr = 0x60, + .clock = 27000000, +}; /* ------------------------------------------------------------------ */ @@ -1330,6 +1345,44 @@ static int em28xx_dvb_init(struct em28xx *dev) goto out_free; } break; + case EM28178_BOARD_PCTV_461E: + { + /* demod I2C adapter */ + struct i2c_adapter *i2c_adapter; + + /* attach demod */ + dvb->fe[0] = dvb_attach(m88ds3103_attach, + &pctv_461e_m88ds3103_config, + &dev->i2c_adap[dev->def_i2c_bus], + &i2c_adapter); + if (dvb->fe[0] == NULL) { + result = -ENODEV; + goto out_free; + } + + /* attach tuner */ + if (!dvb_attach(m88ts2022_attach, dvb->fe[0], + i2c_adapter, + &em28xx_m88ts2022_config)) { + dvb_frontend_detach(dvb->fe[0]); + result = -ENODEV; + goto out_free; + } + + /* delegate signal strength measurement to tuner */ + dvb->fe[0]->ops.read_signal_strength = + dvb->fe[0]->ops.tuner_ops.get_rf_strength; + + /* attach SEC */ + if (!dvb_attach(a8293_attach, dvb->fe[0], + &dev->i2c_adap[dev->def_i2c_bus], + &em28xx_a8293_config)) { + dvb_frontend_detach(dvb->fe[0]); + result = -ENODEV; + goto out_free; + } + } + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index 6e26fba094c..aa35750d6e6 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -133,6 +133,7 @@ #define EM2874_BOARD_DELOCK_61959 89 #define EM2874_BOARD_KWORLD_UB435Q_V2 90 #define EM2765_BOARD_SPEEDLINK_VAD_LAPLACE 91 +#define EM28178_BOARD_PCTV_461E 92 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 |