summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-integrator/core.c46
-rw-r--r--drivers/serial/amba-pl010.c160
-rw-r--r--include/linux/amba/serial.h6
3 files changed, 119 insertions, 93 deletions
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 20071a2767c..576a5e979c0 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -15,7 +15,9 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/termios.h>
#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -28,6 +30,8 @@
#include "common.h"
+static struct amba_pl010_data integrator_uart_data;
+
static struct amba_device rtc_device = {
.dev = {
.bus_id = "mb:15",
@@ -44,6 +48,7 @@ static struct amba_device rtc_device = {
static struct amba_device uart0_device = {
.dev = {
.bus_id = "mb:16",
+ .platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART0_BASE,
@@ -57,6 +62,7 @@ static struct amba_device uart0_device = {
static struct amba_device uart1_device = {
.dev = {
.bus_id = "mb:17",
+ .platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART1_BASE,
@@ -115,6 +121,46 @@ static int __init integrator_init(void)
arch_initcall(integrator_init);
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ * RTS DTR
+ * UART0 7 6
+ * UART1 5 4
+ */
+#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
+{
+ unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+
+ if (dev == &uart0_device) {
+ rts_mask = 1 << 4;
+ dtr_mask = 1 << 5;
+ } else {
+ rts_mask = 1 << 6;
+ dtr_mask = 1 << 7;
+ }
+
+ if (mctrl & TIOCM_RTS)
+ ctrlc |= rts_mask;
+ else
+ ctrls |= rts_mask;
+
+ if (mctrl & TIOCM_DTR)
+ ctrlc |= dtr_mask;
+ else
+ ctrls |= dtr_mask;
+
+ __raw_writel(ctrls, SC_CTRLS);
+ __raw_writel(ctrlc, SC_CTRLC);
+}
+
+static struct amba_pl010_data integrator_uart_data = {
+ .set_mctrl = integrator_uart_set_mctrl,
+};
+
#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
static DEFINE_SPINLOCK(cm_lock);
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 127d6cd5de7..1631414000a 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -51,8 +51,6 @@
#include <linux/amba/serial.h>
#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
#define UART_NR 2
@@ -65,26 +63,16 @@
#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0)
#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0)
-#define UART_DUMMY_RSR_RX /*256*/0
+#define UART_DUMMY_RSR_RX 256
#define UART_PORT_SIZE 64
/*
- * On the Integrator platform, the port RTS and DTR are provided by
- * bits in the following SC_CTRLS register bits:
- * RTS DTR
- * UART0 7 6
- * UART1 5 4
- */
-#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
-
-/*
* We wrap our port structure around the generic uart_port.
*/
struct uart_amba_port {
struct uart_port port;
- unsigned int dtr_mask;
- unsigned int rts_mask;
+ struct amba_device *dev;
+ struct amba_pl010_data *data;
unsigned int old_status;
};
@@ -300,20 +288,9 @@ static unsigned int pl010_get_mctrl(struct uart_port *port)
static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int ctrls = 0, ctrlc = 0;
-
- if (mctrl & TIOCM_RTS)
- ctrlc |= uap->rts_mask;
- else
- ctrls |= uap->rts_mask;
- if (mctrl & TIOCM_DTR)
- ctrlc |= uap->dtr_mask;
- else
- ctrls |= uap->dtr_mask;
-
- __raw_writel(ctrls, SC_CTRLS);
- __raw_writel(ctrlc, SC_CTRLC);
+ if (uap->data)
+ uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl);
}
static void pl010_break_ctl(struct uart_port *port, int break_state)
@@ -539,38 +516,7 @@ static struct uart_ops amba_pl010_pops = {
.verify_port = pl010_verify_port,
};
-static struct uart_amba_port amba_ports[UART_NR] = {
- {
- .port = {
- .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
- .mapbase = INTEGRATOR_UART0_BASE,
- .iotype = UPIO_MEM,
- .irq = IRQ_UARTINT0,
- .uartclk = 14745600,
- .fifosize = 16,
- .ops = &amba_pl010_pops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .dtr_mask = 1 << 5,
- .rts_mask = 1 << 4,
- },
- {
- .port = {
- .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
- .mapbase = INTEGRATOR_UART1_BASE,
- .iotype = UPIO_MEM,
- .irq = IRQ_UARTINT1,
- .uartclk = 14745600,
- .fifosize = 16,
- .ops = &amba_pl010_pops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .dtr_mask = 1 << 7,
- .rts_mask = 1 << 6,
- }
-};
+static struct uart_amba_port *amba_ports[UART_NR];
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
@@ -588,7 +534,7 @@ static void pl010_console_putchar(struct uart_port *port, int ch)
static void
pl010_console_write(struct console *co, const char *s, unsigned int count)
{
- struct uart_port *port = &amba_ports[co->index].port;
+ struct uart_port *port = &amba_ports[co->index]->port;
unsigned int status, old_cr;
/*
@@ -651,7 +597,7 @@ static int __init pl010_console_setup(struct console *co, char *options)
*/
if (co->index >= UART_NR)
co->index = 0;
- port = &amba_ports[co->index].port;
+ port = &amba_ports[co->index]->port;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -672,24 +618,6 @@ static struct console amba_console = {
.data = &amba_reg,
};
-static int __init amba_console_init(void)
-{
- /*
- * All port initializations are done statically
- */
- register_console(&amba_console);
- return 0;
-}
-console_initcall(amba_console_init);
-
-static int __init amba_late_console_init(void)
-{
- if (!(amba_console.flags & CON_ENABLED))
- register_console(&amba_console);
- return 0;
-}
-late_initcall(amba_late_console_init);
-
#define AMBA_CONSOLE &amba_console
#else
#define AMBA_CONSOLE NULL
@@ -707,30 +635,76 @@ static struct uart_driver amba_reg = {
static int pl010_probe(struct amba_device *dev, void *id)
{
- int i;
+ struct uart_amba_port *port;
+ void __iomem *base;
+ int i, ret;
- for (i = 0; i < UART_NR; i++) {
- if (amba_ports[i].port.mapbase != dev->res.start)
- continue;
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == NULL)
+ break;
- amba_ports[i].port.dev = &dev->dev;
- uart_add_one_port(&amba_reg, &amba_ports[i].port);
- amba_set_drvdata(dev, &amba_ports[i]);
- break;
+ if (i == ARRAY_SIZE(amba_ports)) {
+ ret = -EBUSY;
+ goto out;
}
- return 0;
+ port = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+ if (!port) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ base = ioremap(dev->res.start, PAGE_SIZE);
+ if (!base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ port->port.dev = &dev->dev;
+ port->port.mapbase = dev->res.start;
+ port->port.membase = base;
+ port->port.iotype = UPIO_MEM;
+ port->port.irq = dev->irq[0];
+ port->port.uartclk = 14745600;
+ port->port.fifosize = 16;
+ port->port.ops = &amba_pl010_pops;
+ port->port.flags = UPF_BOOT_AUTOCONF;
+ port->port.line = i;
+ port->dev = dev;
+ port->data = dev->dev.platform_data;
+
+ amba_ports[i] = port;
+
+ amba_set_drvdata(dev, port);
+ ret = uart_add_one_port(&amba_reg, &port->port);
+ if (ret) {
+ amba_set_drvdata(dev, NULL);
+ amba_ports[i] = NULL;
+ iounmap(base);
+ free:
+ kfree(port);
+ }
+
+ out:
+ return ret;
}
static int pl010_remove(struct amba_device *dev)
{
- struct uart_amba_port *uap = amba_get_drvdata(dev);
-
- if (uap)
- uart_remove_one_port(&amba_reg, &uap->port);
+ struct uart_amba_port *port = amba_get_drvdata(dev);
+ int i;
amba_set_drvdata(dev, NULL);
+ uart_remove_one_port(&amba_reg, &port->port);
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == port)
+ amba_ports[i] = NULL;
+
+ iounmap(port->port.membase);
+ kfree(port);
+
return 0;
}
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index dc726ffcceb..48ee32a18ac 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -158,4 +158,10 @@
#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
+#ifndef __ASSEMBLY__
+struct amba_pl010_data {
+ void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
+};
+#endif
+
#endif