diff options
Diffstat (limited to 'Documentation/devicetree/bindings/marvell.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/marvell.txt | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt index f7a0da6b402..ea2b16ced49 100644 --- a/Documentation/devicetree/bindings/marvell.txt +++ b/Documentation/devicetree/bindings/marvell.txt @@ -79,7 +79,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. Required properties: - #address-cells : Should be <1> - #size-cells : Should be <0> - - device_type : Should be "mdio" - compatible : Should be "marvell,mv64360-mdio" Example: @@ -87,7 +86,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. mdio { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; compatible = "marvell,mv64360-mdio"; ethernet-phy@0 { @@ -132,7 +130,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. Ethernet port node Required properties: - - device_type : Should be "network". - compatible : Should be "marvell,mv64360-eth". - reg : Should be <0>, <1>, or <2>, according to which registers within the silicon block the device uses. @@ -145,7 +142,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. Example Discovery Ethernet port node: ethernet@0 { - device_type = "network"; compatible = "marvell,mv64360-eth"; reg = <0>; interrupts = <32>; @@ -159,7 +155,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. c) Marvell Discovery PHY nodes Required properties: - - device_type : Should be "ethernet-phy" - interrupts : <a> where a is the interrupt number for this phy. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. @@ -167,7 +162,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. Example Discovery PHY node: ethernet-phy@1 { - device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; @@ -271,7 +265,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. serial port. Required properties: - - device_type : "serial" - compatible : "marvell,mv64360-mpsc" - reg : Offset and length of the register set for this device - sdma : the phandle for the SDMA node used by this port @@ -288,7 +281,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. Example Discovery MPSCINTR node: mpsc@8000 { - device_type = "serial"; compatible = "marvell,mv64360-mpsc"; reg = <0x8000 0x38>; virtual-reg = <0xf1008000>; |