diff options
Diffstat (limited to 'arch/arm/include/debug')
| -rw-r--r-- | arch/arm/include/debug/imx-uart.h | 11 | ||||
| -rw-r--r-- | arch/arm/include/debug/msm.S | 46 | ||||
| -rw-r--r-- | arch/arm/include/debug/s3c24xx.S | 46 | ||||
| -rw-r--r-- | arch/arm/include/debug/vf.S | 15 | ||||
| -rw-r--r-- | arch/arm/include/debug/zynq.S | 10 |
5 files changed, 81 insertions, 47 deletions
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 42b823cd2d2..032a316eb80 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,15 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SX_UART1_BASE_ADDR 0x02020000 +#define IMX6SX_UART2_BASE_ADDR 0x021e8000 +#define IMX6SX_UART3_BASE_ADDR 0x021ec000 +#define IMX6SX_UART4_BASE_ADDR 0x021f0000 +#define IMX6SX_UART5_BASE_ADDR 0x021f4000 +#define IMX6SX_UART6_BASE_ADDR 0x022a0000 +#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR +#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -103,6 +112,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SX_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9d653d47590..9ef57612811 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -15,51 +15,15 @@ * */ -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50) -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART3_PHYS 0xA9C00000 -#elif defined(CONFIG_ARCH_MSM7X30) -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART3_PHYS 0xACC00000 -#endif - -#if defined(CONFIG_DEBUG_MSM_UART1) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART2) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART3) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif - -#ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x19C40000 -#endif - -#ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x16440000 -#endif - -#ifdef CONFIG_DEBUG_MSM8974_UART -#define MSM_DEBUG_UART_BASE 0xFA71E000 -#define MSM_DEBUG_UART_PHYS 0xF991E000 -#endif - .macro addruart, rp, rv, tmp -#ifdef MSM_DEBUG_UART_PHYS - ldr \rp, =MSM_DEBUG_UART_PHYS - ldr \rv, =MSM_DEBUG_UART_BASE +#ifdef CONFIG_DEBUG_UART_PHYS + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT #endif .endm .macro senduart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] #else @@ -68,7 +32,7 @@ .endm .macro waituart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] tst \rd, #0x08 diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S new file mode 100644 index 00000000000..b1f54dc4888 --- /dev/null +++ b/arch/arm/include/debug/s3c24xx.S @@ -0,0 +1,46 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_s3c.h> + +#define S3C2410_UART1_OFF (0x4000) + + .macro addruart, rp, rv, tmp + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_DEBUG_S3C2410_UART) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#endif + +/* include the reset of the code which will do the work */ + +#include <debug/samsung.S> diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S index ba12cc44b2c..b88933849a1 100644 --- a/arch/arm/include/debug/vf.S +++ b/arch/arm/include/debug/vf.S @@ -7,9 +7,20 @@ * */ +#define VF_UART0_BASE_ADDR 0x40027000 +#define VF_UART1_BASE_ADDR 0x40028000 +#define VF_UART2_BASE_ADDR 0x40029000 +#define VF_UART3_BASE_ADDR 0x4002a000 +#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR +#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n) +#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT) + +#define VF_UART_VIRTUAL_BASE 0xfe000000 + .macro addruart, rp, rv, tmp - ldr \rp, =0x40028000 @ physical - ldr \rv, =0xfe028000 @ virtual + ldr \rp, =VF_UART_PHYSICAL_BASE @ physical + and \rv, \rp, #0xffffff @ offset within 16MB section + add \rv, \rv, #VF_UART_VIRTUAL_BASE .endm .macro senduart, rd, rx diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index 0b762fafa75..bd13dedbdef 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,18 +20,18 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 +#define UART0_VIRT 0xF0000000 #define UART1_PHYS 0xE0001000 -#define UART_SIZE SZ_4K -#define UART_VIRT 0xF0001000 +#define UART1_VIRT 0xF0001000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS +# define LL_UART_VADDR UART1_VIRT #else # define LL_UART_PADDR UART0_PHYS +# define LL_UART_VADDR UART0_VIRT #endif -#define LL_UART_VADDR UART_VIRT - .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual @@ -43,12 +43,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART_SR_OFFSET] +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXEMPTY beq 1001b .endm .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXFULL @ bne 1002b @ wait if FIFO is full .endm |