diff options
Diffstat (limited to 'arch/arm/mach-cns3xxx/include')
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 635 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/debug-macro.S | 21 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/entry-macro.S | 82 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/hardware.h | 22 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/io.h | 17 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/irqs.h | 24 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/memory.h | 26 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/system.h | 29 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/timex.h | 12 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/uncompress.h | 55 | ||||
-rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/vmalloc.h | 11 |
11 files changed, 934 insertions, 0 deletions
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h new file mode 100644 index 00000000000..8a2f5a21d4e --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -0,0 +1,635 @@ +/* + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_BOARD_CNS3XXXH +#define __MACH_BOARD_CNS3XXXH + +/* + * Memory map + */ +#define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */ +#define CNS3XXX_FLASH_SIZE SZ_256M + +#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */ + +#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ + +#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ +#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 + +#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ +#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 + +#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ +#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 + +#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ +#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 + +#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ +#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 + +#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ +#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 + +#define SMC_MEMC_STATUS_OFFSET 0x000 +#define SMC_MEMIF_CFG_OFFSET 0x004 +#define SMC_MEMC_CFG_SET_OFFSET 0x008 +#define SMC_MEMC_CFG_CLR_OFFSET 0x00C +#define SMC_DIRECT_CMD_OFFSET 0x010 +#define SMC_SET_CYCLES_OFFSET 0x014 +#define SMC_SET_OPMODE_OFFSET 0x018 +#define SMC_REFRESH_PERIOD_0_OFFSET 0x020 +#define SMC_REFRESH_PERIOD_1_OFFSET 0x024 +#define SMC_SRAM_CYCLES0_0_OFFSET 0x100 +#define SMC_NAND_CYCLES0_0_OFFSET 0x100 +#define SMC_OPMODE0_0_OFFSET 0x104 +#define SMC_SRAM_CYCLES0_1_OFFSET 0x120 +#define SMC_NAND_CYCLES0_1_OFFSET 0x120 +#define SMC_OPMODE0_1_OFFSET 0x124 +#define SMC_USER_STATUS_OFFSET 0x200 +#define SMC_USER_CONFIG_OFFSET 0x204 +#define SMC_ECC_STATUS_OFFSET 0x300 +#define SMC_ECC_MEMCFG_OFFSET 0x304 +#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308 +#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C +#define SMC_ECC_ADDR0_OFFSET 0x310 +#define SMC_ECC_ADDR1_OFFSET 0x314 +#define SMC_ECC_VALUE0_OFFSET 0x318 +#define SMC_ECC_VALUE1_OFFSET 0x31C +#define SMC_ECC_VALUE2_OFFSET 0x320 +#define SMC_ECC_VALUE3_OFFSET 0x324 +#define SMC_PERIPH_ID_0_OFFSET 0xFE0 +#define SMC_PERIPH_ID_1_OFFSET 0xFE4 +#define SMC_PERIPH_ID_2_OFFSET 0xFE8 +#define SMC_PERIPH_ID_3_OFFSET 0xFEC +#define SMC_PCELL_ID_0_OFFSET 0xFF0 +#define SMC_PCELL_ID_1_OFFSET 0xFF4 +#define SMC_PCELL_ID_2_OFFSET 0xFF8 +#define SMC_PCELL_ID_3_OFFSET 0xFFC + +#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ +#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 + +#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ +#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 + +#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ +#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 + +#define RTC_SEC_OFFSET 0x00 +#define RTC_MIN_OFFSET 0x04 +#define RTC_HOUR_OFFSET 0x08 +#define RTC_DAY_OFFSET 0x0C +#define RTC_SEC_ALM_OFFSET 0x10 +#define RTC_MIN_ALM_OFFSET 0x14 +#define RTC_HOUR_ALM_OFFSET 0x18 +#define RTC_REC_OFFSET 0x1C +#define RTC_CTRL_OFFSET 0x20 +#define RTC_INTR_STS_OFFSET 0x34 + +#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ + +#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ +#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 + +#define PM_CLK_GATE_OFFSET 0x00 +#define PM_SOFT_RST_OFFSET 0x04 +#define PM_HS_CFG_OFFSET 0x08 +#define PM_CACTIVE_STA_OFFSET 0x0C +#define PM_PWR_STA_OFFSET 0x10 +#define PM_SYS_CLK_CTRL_OFFSET 0x14 +#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18 +#define PM_PLL_HM_PD_OFFSET 0x1C + +#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ +#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 + +#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ +#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 + +#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ +#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 + +#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ +#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 + +#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ +#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 + +#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ +#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 + +#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ +#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 + +#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 + +#define TIMER1_COUNTER_OFFSET 0x00 +#define TIMER1_AUTO_RELOAD_OFFSET 0x04 +#define TIMER1_MATCH_V1_OFFSET 0x08 +#define TIMER1_MATCH_V2_OFFSET 0x0C + +#define TIMER2_COUNTER_OFFSET 0x10 +#define TIMER2_AUTO_RELOAD_OFFSET 0x14 +#define TIMER2_MATCH_V1_OFFSET 0x18 +#define TIMER2_MATCH_V2_OFFSET 0x1C + +#define TIMER1_2_CONTROL_OFFSET 0x30 +#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34 +#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38 + +#define TIMER_FREERUN_OFFSET 0x40 +#define TIMER_FREERUN_CONTROL_OFFSET 0x44 + +#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ +#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 + +#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ +#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 + +#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ +#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 + +#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ +#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 + +#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ +#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 + +#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ +#define CNS3XXX_USB_BASE_VIRT 0xFFF16000 + +#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ +#define CNS3XXX_SATA2_SIZE SZ_16M +#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 + +#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ +#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 + +#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ +#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 + +#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ +#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 + +#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ +#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 + +#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ +#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000 + +#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ +#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 + +#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ +#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 + +#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ +#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 + +#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ +#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 + +#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ +#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 + +#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */ +#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 + +#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ +#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 + +#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ +#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 + +#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ +#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 + +#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ +#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 + +#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ +#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 + +#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */ +#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 + +#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ +#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 + +/* + * Testchip peripheral and fpga gic regions + */ +#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 + +#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 + +#define CNS3XXX_TC11MP_TWD_BASE 0x90000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 + +#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 + +#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ +#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 + +/* + * Misc block + */ +#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs)) +#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset)))) + +#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00) +#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04) +#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08) +#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C) +#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10) +#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14) +#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20) +#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24) +#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28) +#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C) +#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30) +#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34) +#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40) +#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44) +#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48) +#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C) +#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50) +#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54) + +#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310) + +#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800) +#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804) +#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808) +#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c) +#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810) +#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814) + +#define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004) +#define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100) +#define MISC_PCIE_AXIS_AWMISC(x) MISC_MEM_MAP(0x944 + (x) * 0x100) +#define MISC_PCIE_AXIS_ARMISC(x) MISC_MEM_MAP(0x948 + (x) * 0x100) +#define MISC_PCIE_AXIS_RMISC(x) MISC_MEM_MAP(0x94C + (x) * 0x100) +#define MISC_PCIE_AXIS_BMISC(x) MISC_MEM_MAP(0x950 + (x) * 0x100) +#define MISC_PCIE_AXIM_RMISC(x) MISC_MEM_MAP(0x954 + (x) * 0x100) +#define MISC_PCIE_AXIM_BMISC(x) MISC_MEM_MAP(0x958 + (x) * 0x100) +#define MISC_PCIE_CTRL(x) MISC_MEM_MAP(0x95C + (x) * 0x100) +#define MISC_PCIE_PM_DEBUG(x) MISC_MEM_MAP(0x960 + (x) * 0x100) +#define MISC_PCIE_RFC_DEBUG(x) MISC_MEM_MAP(0x964 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGL(x) MISC_MEM_MAP(0x968 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGH(x) MISC_MEM_MAP(0x96C + (x) * 0x100) +#define MISC_PCIE_DIAG_DEBUGH(x) MISC_MEM_MAP(0x970 + (x) * 0x100) +#define MISC_PCIE_W1CLR(x) MISC_MEM_MAP(0x974 + (x) * 0x100) +#define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100) +#define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100) + +/* + * Power management and clock control + */ +#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset)))) + +#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000) +#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004) +#define PM_HS_CFG_REG PMU_REG_VALUE(0x008) +#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C) +#define PM_PWR_STA_REG PMU_REG_VALUE(0x010) +#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014) +#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018) +#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C) +#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020) +#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024) +#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028) +#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C) +#define PM_CSR_REG PMU_REG_VALUE(0x030) + +/* PM_CLK_GATE_REG */ +#define PM_CLK_GATE_REG_OFFSET_SDIO (25) +#define PM_CLK_GATE_REG_OFFSET_GPU (24) +#define PM_CLK_GATE_REG_OFFSET_CIM (23) +#define PM_CLK_GATE_REG_OFFSET_LCDC (22) +#define PM_CLK_GATE_REG_OFFSET_I2S (21) +#define PM_CLK_GATE_REG_OFFSET_RAID (20) +#define PM_CLK_GATE_REG_OFFSET_SATA (19) +#define PM_CLK_GATE_REG_OFFSET_PCIE(x) (17 + (x)) +#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16) +#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15) +#define PM_CLK_GATE_REG_OFFSET_TIMER (14) +#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13) +#define PM_CLK_GATE_REG_OFFSET_HCIE (12) +#define PM_CLK_GATE_REG_OFFSET_SWITCH (11) +#define PM_CLK_GATE_REG_OFFSET_GPIO (10) +#define PM_CLK_GATE_REG_OFFSET_UART3 (9) +#define PM_CLK_GATE_REG_OFFSET_UART2 (8) +#define PM_CLK_GATE_REG_OFFSET_UART1 (7) +#define PM_CLK_GATE_REG_OFFSET_RTC (5) +#define PM_CLK_GATE_REG_OFFSET_GDMA (4) +#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3) +#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1) +#define PM_CLK_GATE_REG_MASK (0x03FFFFBA) + +/* PM_SOFT_RST_REG */ +#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31) +#define PM_SOFT_RST_REG_OFFST_CPU1 (29) +#define PM_SOFT_RST_REG_OFFST_CPU0 (28) +#define PM_SOFT_RST_REG_OFFST_SDIO (25) +#define PM_SOFT_RST_REG_OFFST_GPU (24) +#define PM_SOFT_RST_REG_OFFST_CIM (23) +#define PM_SOFT_RST_REG_OFFST_LCDC (22) +#define PM_SOFT_RST_REG_OFFST_I2S (21) +#define PM_SOFT_RST_REG_OFFST_RAID (20) +#define PM_SOFT_RST_REG_OFFST_SATA (19) +#define PM_SOFT_RST_REG_OFFST_PCIE(x) (17 + (x)) +#define PM_SOFT_RST_REG_OFFST_USB_HOST (16) +#define PM_SOFT_RST_REG_OFFST_USB_OTG (15) +#define PM_SOFT_RST_REG_OFFST_TIMER (14) +#define PM_SOFT_RST_REG_OFFST_CRYPTO (13) +#define PM_SOFT_RST_REG_OFFST_HCIE (12) +#define PM_SOFT_RST_REG_OFFST_SWITCH (11) +#define PM_SOFT_RST_REG_OFFST_GPIO (10) +#define PM_SOFT_RST_REG_OFFST_UART3 (9) +#define PM_SOFT_RST_REG_OFFST_UART2 (8) +#define PM_SOFT_RST_REG_OFFST_UART1 (7) +#define PM_SOFT_RST_REG_OFFST_RTC (5) +#define PM_SOFT_RST_REG_OFFST_GDMA (4) +#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3) +#define PM_SOFT_RST_REG_OFFST_DMC (2) +#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1) +#define PM_SOFT_RST_REG_OFFST_GLOBAL (0) +#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF) + +/* PMHS_CFG_REG */ +#define PM_HS_CFG_REG_OFFSET_SDIO (25) +#define PM_HS_CFG_REG_OFFSET_GPU (24) +#define PM_HS_CFG_REG_OFFSET_CIM (23) +#define PM_HS_CFG_REG_OFFSET_LCDC (22) +#define PM_HS_CFG_REG_OFFSET_I2S (21) +#define PM_HS_CFG_REG_OFFSET_RAID (20) +#define PM_HS_CFG_REG_OFFSET_SATA (19) +#define PM_HS_CFG_REG_OFFSET_PCIE1 (18) +#define PM_HS_CFG_REG_OFFSET_PCIE0 (17) +#define PM_HS_CFG_REG_OFFSET_USB_HOST (16) +#define PM_HS_CFG_REG_OFFSET_USB_OTG (15) +#define PM_HS_CFG_REG_OFFSET_TIMER (14) +#define PM_HS_CFG_REG_OFFSET_CRYPTO (13) +#define PM_HS_CFG_REG_OFFSET_HCIE (12) +#define PM_HS_CFG_REG_OFFSET_SWITCH (11) +#define PM_HS_CFG_REG_OFFSET_GPIO (10) +#define PM_HS_CFG_REG_OFFSET_UART3 (9) +#define PM_HS_CFG_REG_OFFSET_UART2 (8) +#define PM_HS_CFG_REG_OFFSET_UART1 (7) +#define PM_HS_CFG_REG_OFFSET_RTC (5) +#define PM_HS_CFG_REG_OFFSET_GDMA (4) +#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_HS_CFG_REG_OFFSET_DMC (2) +#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1) +#define PM_HS_CFG_REG_MASK (0x03FFFFBE) +#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806) + +/* PM_CACTIVE_STA_REG */ +#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25) +#define PM_CACTIVE_STA_REG_OFFSET_GPU (24) +#define PM_CACTIVE_STA_REG_OFFSET_CIM (23) +#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22) +#define PM_CACTIVE_STA_REG_OFFSET_I2S (21) +#define PM_CACTIVE_STA_REG_OFFSET_RAID (20) +#define PM_CACTIVE_STA_REG_OFFSET_SATA (19) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17) +#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16) +#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15) +#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14) +#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13) +#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12) +#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11) +#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10) +#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9) +#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8) +#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7) +#define PM_CACTIVE_STA_REG_OFFSET_RTC (5) +#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4) +#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_CACTIVE_STA_REG_OFFSET_DMC (2) +#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1) +#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE) + +/* PM_PWR_STA_REG */ +#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25) +#define PM_PWR_STA_REG_REG_OFFSET_GPU (24) +#define PM_PWR_STA_REG_REG_OFFSET_CIM (23) +#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22) +#define PM_PWR_STA_REG_REG_OFFSET_I2S (21) +#define PM_PWR_STA_REG_REG_OFFSET_RAID (20) +#define PM_PWR_STA_REG_REG_OFFSET_SATA (19) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17) +#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16) +#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15) +#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14) +#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13) +#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12) +#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11) +#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10) +#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9) +#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8) +#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7) +#define PM_PWR_STA_REG_REG_OFFSET_RTC (5) +#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4) +#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_PWR_STA_REG_REG_OFFSET_DMC (2) +#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1) +#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE) + +/* PM_CLK_CTRL_REG */ +#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31) +#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28) +#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16) +#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14) +#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12) +#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9) +#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7) +#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6) +#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4) +#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0) + +#define PM_CPU_CLK_DIV(DIV) { \ + PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ + PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ +} + +#define PM_PLL_CPU_SEL(CPU) { \ + PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ + PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ +} + +/* PM_PLL_LCD_I2S_CTRL_REG */ +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0) + +/* PM_PLL_HM_PD_CTRL_REG */ +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2) +#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C) + +/* PM_WDT_CTRL_REG */ +#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0) + +/* PM_CSR_REG - Clock Scaling Register*/ +#define PM_CSR_REG_OFFSET_CSR_EN (30) +#define PM_CSR_REG_OFFSET_CSR_NUM (0) + +#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK) + +/* Software reset*/ +#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK) + +/* + * CNS3XXX support several power saving mode as following, + * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate + */ +#define CNS3XXX_PWR_CPU_MODE_DFS (0) +#define CNS3XXX_PWR_CPU_MODE_IDLE (1) +#define CNS3XXX_PWR_CPU_MODE_HALT (2) +#define CNS3XXX_PWR_CPU_MODE_DOZE (3) +#define CNS3XXX_PWR_CPU_MODE_SLEEP (4) +#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5) + +#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK) +#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK + +/* Change CPU frequency and divider */ +#define CNS3XXX_PWR_PLL_CPU_300MHZ (0) +#define CNS3XXX_PWR_PLL_CPU_333MHZ (1) +#define CNS3XXX_PWR_PLL_CPU_366MHZ (2) +#define CNS3XXX_PWR_PLL_CPU_400MHZ (3) +#define CNS3XXX_PWR_PLL_CPU_433MHZ (4) +#define CNS3XXX_PWR_PLL_CPU_466MHZ (5) +#define CNS3XXX_PWR_PLL_CPU_500MHZ (6) +#define CNS3XXX_PWR_PLL_CPU_533MHZ (7) +#define CNS3XXX_PWR_PLL_CPU_566MHZ (8) +#define CNS3XXX_PWR_PLL_CPU_600MHZ (9) +#define CNS3XXX_PWR_PLL_CPU_633MHZ (10) +#define CNS3XXX_PWR_PLL_CPU_666MHZ (11) +#define CNS3XXX_PWR_PLL_CPU_700MHZ (12) + +#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2) + +/* Change DDR2 frequency */ +#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0) +#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1) +#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2) +#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3) + +void cns3xxx_pwr_soft_rst(unsigned int block); +void cns3xxx_pwr_clk_en(unsigned int block); +int cns3xxx_cpu_clock(void); + +/* + * ARM11 MPCore interrupt sources (primary GIC) + */ +#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0) +#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1) +#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2) +#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3) +#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4) +#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5) +#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6) +#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7) +#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8) +#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9) +#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10) +#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11) +#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12) +#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13) +#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14) +#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15) +#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16) + +#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17) +#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18) +#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19) +#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20) +#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21) +#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22) +#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23) +#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24) +#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25) +#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26) + +#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27) +#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28) +#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29) +#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31) +#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32) +#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33) +#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34) +#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35) + +#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36) +#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37) +#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38) +#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39) +#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40) +#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41) +#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42) +#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43) +#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44) +#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45) +#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46) +#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47) +#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48) +#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49) +#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50) +#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51) +#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52) +#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53) +#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54) + +#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55) +#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56) +#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57) +#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58) +#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59) +#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60) +#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61) +#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62) +#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63) + +#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_CNS3XXX +#endif + +#endif /* __MACH_BOARD_CNS3XXX_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S new file mode 100644 index 00000000000..d16ce7eb00e --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -0,0 +1,21 @@ +/* + * Debugging macro include header + * + * Copyright 1994-1999 Russell King + * Copyright 2008 Cavium Networks + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf0000000 @ virtual base + orr \rx, \rx, #0x00009000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S new file mode 100644 index 00000000000..5e1c5545680 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -0,0 +1,82 @@ +/* + * Low-level IRQ helper macros for Cavium Networks platforms + * + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h new file mode 100644 index 00000000000..57e09836f9d --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/hardware.h @@ -0,0 +1,22 @@ +/* + * This file contains the hardware definitions of the Cavium Networks boards. + * + * Copyright 2003 ARM Limited. + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#include <asm/sizes.h> + +/* macro to get at IO space when running virtually */ +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 +#define pcibios_assign_all_busses() 1 + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/io.h b/arch/arm/mach-cns3xxx/include/mach/io.h new file mode 100644 index 00000000000..33b6fc1ece7 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/io.h @@ -0,0 +1,17 @@ +/* + * Copyright 2008 Cavium Networks + * Copyright 2003 ARM Limited + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h new file mode 100644 index 00000000000..2ab96f8085c --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/irqs.h @@ -0,0 +1,24 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 +#define IRQ_TC11MP_GIC_START 32 + +#include <mach/cns3xxx.h> + +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h new file mode 100644 index 00000000000..3b6b769b7a2 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/memory.h @@ -0,0 +1,26 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +#define __phys_to_bus(x) ((x) + PHYS_OFFSET) +#define __bus_to_phys(x) ((x) - PHYS_OFFSET) + +#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) +#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) +#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) +#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h new file mode 100644 index 00000000000..58bb03ae3cf --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/hardware.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +void arch_reset(char mode, const char *cmd); + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h new file mode 100644 index 00000000000..1fd04217cac --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/timex.h @@ -0,0 +1,12 @@ +/* + * Cavium Networks architecture timex specifications + * + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h new file mode 100644 index 00000000000..de8ead9b91f --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -0,0 +1,55 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/cns3xxx.h> + +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_cns3420vb()) + return CNS3XXX_UART0_BASE; + else + return 0; +} + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h new file mode 100644 index 00000000000..4d381ec0527 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h @@ -0,0 +1,11 @@ +/* + * Copyright 2000 Russell King. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define VMALLOC_END 0xd8000000 |