diff options
Diffstat (limited to 'arch/arm/mach-msm/include')
19 files changed, 1398 insertions, 174 deletions
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 264d62e519f..e302fbdc439 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -21,18 +21,24 @@ /* platform device data structures */ -struct msm_mddi_platform_data +struct msm_acpu_clock_platform_data { - void (*panel_power)(int on); - unsigned has_vsync_irq:1; + uint32_t acpu_switch_time_us; + uint32_t max_speed_delta_khz; + uint32_t vdd_switch_time_us; + unsigned long power_collapse_khz; + unsigned long wait_for_irq_khz; }; +struct clk; + /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); -void __init msm_clock_init(void); +void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks); +void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); #endif diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h new file mode 100644 index 00000000000..c05ca40478c --- /dev/null +++ b/arch/arm/mach-msm/include/mach/clk.h @@ -0,0 +1,57 @@ +/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Code Aurora Forum, Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef __MACH_CLK_H +#define __MACH_CLK_H + +/* Magic rate value for use with PM QOS to request the board's maximum + * supported AXI rate. PM QOS will only pass positive s32 rate values + * through to the clock driver, so INT_MAX is used. + */ +#define MSM_AXI_MAX_FREQ LONG_MAX + +enum clk_reset_action { + CLK_RESET_DEASSERT = 0, + CLK_RESET_ASSERT = 1 +}; + +struct clk; + +/* Rate is minimum clock rate in Hz */ +int clk_set_min_rate(struct clk *clk, unsigned long rate); + +/* Rate is maximum clock rate in Hz */ +int clk_set_max_rate(struct clk *clk, unsigned long rate); + +/* Assert/Deassert reset to a hardware block associated with a clock */ +int clk_reset(struct clk *clk, enum clk_reset_action action); + +/* Set clock-specific configuration parameters */ +int clk_set_flags(struct clk *clk, unsigned long flags); + +#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 5ab5bdffab0..00f9bbfadbe 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -28,6 +28,8 @@ struct msm_dmov_cmd { void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result, struct msm_dmov_errdata *err); + void (*execute_func)(struct msm_dmov_cmd *cmd); + void *data; }; void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); @@ -41,40 +43,42 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); #define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) #define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) -/* only security domain 3 is available to the ARM11 - * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM - */ +#if defined(CONFIG_ARCH_MSM7X30) +#define DMOV_SD_AARM DMOV_SD2 +#else +#define DMOV_SD_AARM DMOV_SD3 +#endif -#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch) +#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) #define DMOV_CMD_LIST (0 << 29) /* does not work */ #define DMOV_CMD_PTR_LIST (1 << 29) /* works */ #define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ #define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ #define DMOV_CMD_ADDR(addr) ((addr) >> 3) -#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch) +#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) #define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ #define DMOV_RSLT_ERROR (1 << 3) #define DMOV_RSLT_FLUSH (1 << 2) #define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ #define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ -#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch) +#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) -#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch) +#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) #define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) #define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) #define DMOV_STATUS_RSLT_VALID (1 << 1) #define DMOV_STATUS_CMD_PTR_RDY (1 << 0) -#define DMOV_ISR DMOV_SD3(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch) +#define DMOV_ISR DMOV_SD_AARM(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) #define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) #define DMOV_CONFIG_IRQ_EN (1 << 0) diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h new file mode 100644 index 00000000000..262b441b437 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. + * Author: Mike Lockwood <lockwood@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef __ASM_ARCH_MSM_GPIO_H +#define __ASM_ARCH_MSM_GPIO_H + +/** + * struct msm_gpio - GPIO pin description + * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config() + * @label - textual label + * + * Usually, GPIO's are operated by sets. + * This struct accumulate all GPIO information in single source + * and facilitete group operations provided by msm_gpios_xxx() + */ +struct msm_gpio { + u32 gpio_cfg; + const char *label; +}; + +/** + * msm_gpios_request_enable() - request and enable set of GPIOs + * + * Request and configure set of GPIO's + * In case of error, all operations rolled back. + * Return error code. + * + * @table: GPIO table + * @size: number of entries in @table + */ +int msm_gpios_request_enable(const struct msm_gpio *table, int size); + +/** + * msm_gpios_disable_free() - disable and free set of GPIOs + * + * @table: GPIO table + * @size: number of entries in @table + */ +void msm_gpios_disable_free(const struct msm_gpio *table, int size); + +/** + * msm_gpios_request() - request set of GPIOs + * In case of error, all operations rolled back. + * Return error code. + * + * @table: GPIO table + * @size: number of entries in @table + */ +int msm_gpios_request(const struct msm_gpio *table, int size); + +/** + * msm_gpios_free() - free set of GPIOs + * + * @table: GPIO table + * @size: number of entries in @table + */ +void msm_gpios_free(const struct msm_gpio *table, int size); + +/** + * msm_gpios_enable() - enable set of GPIOs + * In case of error, all operations rolled back. + * Return error code. + * + * @table: GPIO table + * @size: number of entries in @table + */ +int msm_gpios_enable(const struct msm_gpio *table, int size); + +/** + * msm_gpios_disable() - disable set of GPIOs + * + * @table: GPIO table + * @size: number of entries in @table + */ +void msm_gpios_disable(const struct msm_gpio *table, int size); + +/* GPIO TLMM (Top Level Multiplexing) Definitions */ + +/* GPIO TLMM: Function -- GPIO specific */ + +/* GPIO TLMM: Direction */ +enum { + GPIO_INPUT, + GPIO_OUTPUT, +}; + +/* GPIO TLMM: Pullup/Pulldown */ +enum { + GPIO_NO_PULL, + GPIO_PULL_DOWN, + GPIO_KEEPER, + GPIO_PULL_UP, +}; + +/* GPIO TLMM: Drive Strength */ +enum { + GPIO_2MA, + GPIO_4MA, + GPIO_6MA, + GPIO_8MA, + GPIO_10MA, + GPIO_12MA, + GPIO_14MA, + GPIO_16MA, +}; + +enum { + GPIO_ENABLE, + GPIO_DISABLE, +}; + +#define GPIO_CFG(gpio, func, dir, pull, drvstr) \ + ((((gpio) & 0x3FF) << 4) | \ + ((func) & 0xf) | \ + (((dir) & 0x1) << 14) | \ + (((pull) & 0x3) << 15) | \ + (((drvstr) & 0xF) << 17)) + +/** + * extract GPIO pin from bit-field used for gpio_tlmm_config + */ +#define GPIO_PIN(gpio_cfg) (((gpio_cfg) >> 4) & 0x3ff) +#define GPIO_FUNC(gpio_cfg) (((gpio_cfg) >> 0) & 0xf) +#define GPIO_DIR(gpio_cfg) (((gpio_cfg) >> 14) & 0x1) +#define GPIO_PULL(gpio_cfg) (((gpio_cfg) >> 15) & 0x3) +#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf) + +int gpio_tlmm_config(unsigned config, unsigned disable); + +#endif /* __ASM_ARCH_MSM_GPIO_H */ diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h index aab964591db..c35b29f9ac0 100644 --- a/arch/arm/mach-msm/include/mach/io.h +++ b/arch/arm/mach-msm/include/mach/io.h @@ -26,4 +26,9 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) +void msm_map_qsd8x50_io(void); +void msm_map_msm7x30_io(void); + +extern unsigned int msm_shared_ram_phys; + #endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h new file mode 100644 index 00000000000..f1fe70612fe --- /dev/null +++ b/arch/arm/mach-msm/include/mach/irqs-7x00.h @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + */ + +#ifndef __ASM_ARCH_MSM_IRQS_7X00_H +#define __ASM_ARCH_MSM_IRQS_7X00_H + +/* MSM ARM11 Interrupt Numbers */ +/* See 80-VE113-1 A, pp219-221 */ + +#define INT_A9_M2A_0 0 +#define INT_A9_M2A_1 1 +#define INT_A9_M2A_2 2 +#define INT_A9_M2A_3 3 +#define INT_A9_M2A_4 4 +#define INT_A9_M2A_5 5 +#define INT_A9_M2A_6 6 +#define INT_GP_TIMER_EXP 7 +#define INT_DEBUG_TIMER_EXP 8 +#define INT_UART1 9 +#define INT_UART2 10 +#define INT_UART3 11 +#define INT_UART1_RX 12 +#define INT_UART2_RX 13 +#define INT_UART3_RX 14 +#define INT_USB_OTG 15 +#define INT_MDDI_PRI 16 +#define INT_MDDI_EXT 17 +#define INT_MDDI_CLIENT 18 +#define INT_MDP 19 +#define INT_GRAPHICS 20 +#define INT_ADM_AARM 21 +#define INT_ADSP_A11 22 +#define INT_ADSP_A9_A11 23 +#define INT_SDC1_0 24 +#define INT_SDC1_1 25 +#define INT_SDC2_0 26 +#define INT_SDC2_1 27 +#define INT_KEYSENSE 28 +#define INT_TCHSCRN_SSBI 29 +#define INT_TCHSCRN1 30 +#define INT_TCHSCRN2 31 + +#define INT_GPIO_GROUP1 (32 + 0) +#define INT_GPIO_GROUP2 (32 + 1) +#define INT_PWB_I2C (32 + 2) +#define INT_SOFTRESET (32 + 3) +#define INT_NAND_WR_ER_DONE (32 + 4) +#define INT_NAND_OP_DONE (32 + 5) +#define INT_PBUS_ARM11 (32 + 6) +#define INT_AXI_MPU_SMI (32 + 7) +#define INT_AXI_MPU_EBI1 (32 + 8) +#define INT_AD_HSSD (32 + 9) +#define INT_ARM11_PMU (32 + 10) +#define INT_ARM11_DMA (32 + 11) +#define INT_TSIF_IRQ (32 + 12) +#define INT_UART1DM_IRQ (32 + 13) +#define INT_UART1DM_RX (32 + 14) +#define INT_USB_HS (32 + 15) +#define INT_SDC3_0 (32 + 16) +#define INT_SDC3_1 (32 + 17) +#define INT_SDC4_0 (32 + 18) +#define INT_SDC4_1 (32 + 19) +#define INT_UART2DM_RX (32 + 20) +#define INT_UART2DM_IRQ (32 + 21) + +/* 22-31 are reserved */ + +#define NR_MSM_IRQS 64 +#define NR_GPIO_IRQS 122 +#define NR_BOARD_IRQS 64 + +#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h new file mode 100644 index 00000000000..67c5396514f --- /dev/null +++ b/arch/arm/mach-msm/include/mach/irqs-7x30.h @@ -0,0 +1,170 @@ +/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Code Aurora Forum, Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_7X30_H +#define __ASM_ARCH_MSM_IRQS_7X30_H + +/* MSM ACPU Interrupt Numbers */ + +#define INT_DEBUG_TIMER_EXP 0 +#define INT_GPT0_TIMER_EXP 1 +#define INT_GPT1_TIMER_EXP 2 +#define INT_WDT0_ACCSCSSBARK 3 +#define INT_WDT1_ACCSCSSBARK 4 +#define INT_AVS_SVIC 5 +#define INT_AVS_SVIC_SW_DONE 6 +#define INT_SC_DBG_RX_FULL 7 +#define INT_SC_DBG_TX_EMPTY 8 +#define INT_ARM11_PM 9 +#define INT_AVS_REQ_DOWN 10 +#define INT_AVS_REQ_UP 11 +#define INT_SC_ACG 12 +/* SCSS_VICFIQSTS0[13:15] are RESERVED */ +#define INT_L2_SVICCPUIRPTREQ 16 +#define INT_L2_SVICDMANSIRPTREQ 17 +#define INT_L2_SVICDMASIRPTREQ 18 +#define INT_L2_SVICSLVIRPTREQ 19 +#define INT_AD5A_MPROC_APPS_0 20 +#define INT_AD5A_MPROC_APPS_1 21 +#define INT_A9_M2A_0 22 +#define INT_A9_M2A_1 23 +#define INT_A9_M2A_2 24 +#define INT_A9_M2A_3 25 +#define INT_A9_M2A_4 26 +#define INT_A9_M2A_5 27 +#define INT_A9_M2A_6 28 +#define INT_A9_M2A_7 29 +#define INT_A9_M2A_8 30 +#define INT_A9_M2A_9 31 + +#define INT_AXI_EBI1_SC (32 + 0) +#define INT_IMEM_ERR (32 + 1) +#define INT_AXI_EBI0_SC (32 + 2) +#define INT_PBUS_SC_IRQC (32 + 3) +#define INT_PERPH_BUS_BPM (32 + 4) +#define INT_CC_TEMP_SENSE (32 + 5) +#define INT_UXMC_EBI0 (32 + 6) +#define INT_UXMC_EBI1 (32 + 7) +#define INT_EBI2_OP_DONE (32 + 8) +#define INT_EBI2_WR_ER_DONE (32 + 9) +#define INT_TCSR_SPSS_CE (32 + 10) +#define INT_EMDH (32 + 11) +#define INT_PMDH (32 + 12) +#define INT_MDC (32 + 13) +#define INT_MIDI_TO_SUPSS (32 + 14) +#define INT_LPA_2 (32 + 15) +#define INT_GPIO_GROUP1_SECURE (32 + 16) +#define INT_GPIO_GROUP2_SECURE (32 + 17) +#define INT_GPIO_GROUP1 (32 + 18) +#define INT_GPIO_GROUP2 (32 + 19) +#define INT_MPRPH_SOFTRESET (32 + 20) +#define INT_PWB_I2C (32 + 21) +#define INT_PWB_I2C_2 (32 + 22) +#define INT_TSSC_SAMPLE (32 + 23) +#define INT_TSSC_PENUP (32 + 24) +#define INT_TCHSCRN_SSBI (32 + 25) +#define INT_FM_RDS (32 + 26) +#define INT_KEYSENSE (32 + 27) +#define INT_USB_OTG_HS (32 + 28) +#define INT_USB_OTG_HS2 (32 + 29) +#define INT_USB_OTG_HS3 (32 + 30) +#define INT_CSI (32 + 31) + +#define INT_SPI_OUTPUT (64 + 0) +#define INT_SPI_INPUT (64 + 1) +#define INT_SPI_ERROR (64 + 2) +#define INT_UART1 (64 + 3) +#define INT_UART1_RX (64 + 4) +#define INT_UART2 (64 + 5) +#define INT_UART2_RX (64 + 6) +#define INT_UART3 (64 + 7) +#define INT_UART3_RX (64 + 8) +#define INT_UART1DM_IRQ (64 + 9) +#define INT_UART1DM_RX (64 + 10) +#define INT_UART2DM_IRQ (64 + 11) +#define INT_UART2DM_RX (64 + 12) +#define INT_TSIF (64 + 13) +#define INT_ADM_SC1 (64 + 14) +#define INT_ADM_SC2 (64 + 15) +#define INT_MDP (64 + 16) +#define INT_VPE (64 + 17) +#define INT_GRP_2D (64 + 18) +#define INT_GRP_3D (64 + 19) +#define INT_ROTATOR (64 + 20) +#define INT_MFC720 (64 + 21) +#define INT_JPEG (64 + 22) +#define INT_VFE (64 + 23) +#define INT_TV_ENC (64 + 24) +#define INT_PMIC_SSBI (64 + 25) +#define INT_MPM_1 (64 + 26) +#define INT_TCSR_SPSS_SAMPLE (64 + 27) +#define INT_TCSR_SPSS_PENUP (64 + 28) +#define INT_MPM_2 (64 + 29) +#define INT_SDC1_0 (64 + 30) +#define INT_SDC1_1 (64 + 31) + +#define INT_SDC3_0 (96 + 0) +#define INT_SDC3_1 (96 + 1) +#define INT_SDC2_0 (96 + 2) +#define INT_SDC2_1 (96 + 3) +#define INT_SDC4_0 (96 + 4) +#define INT_SDC4_1 (96 + 5) +#define INT_PWB_QUP_IN (96 + 6) +#define INT_PWB_QUP_OUT (96 + 7) +#define INT_PWB_QUP_ERR (96 + 8) +#define INT_SCSS_WDT0_BITE (96 + 9) +/* SCSS_VICFIQSTS3[10:31] are RESERVED */ + +/* Retrofit universal macro names */ +#define INT_ADM_AARM INT_ADM_SC2 +#define INT_USB_HS INT_USB_OTG_HS +#define INT_USB_OTG INT_USB_OTG_HS +#define INT_TCHSCRN1 INT_TSSC_SAMPLE +#define INT_TCHSCRN2 INT_TSSC_PENUP +#define INT_GP_TIMER_EXP INT_GPT0_TIMER_EXP +#define INT_ADSP_A11 INT_AD5A_MPROC_APPS_0 +#define INT_ADSP_A9_A11 INT_AD5A_MPROC_APPS_1 +#define INT_MDDI_EXT INT_EMDH +#define INT_MDDI_PRI INT_PMDH +#define INT_MDDI_CLIENT INT_MDC +#define INT_NAND_WR_ER_DONE INT_EBI2_WR_ER_DONE +#define INT_NAND_OP_DONE INT_EBI2_OP_DONE + +#define NR_MSM_IRQS 128 +#define NR_GPIO_IRQS 182 +#define PMIC8058_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS) +#define NR_PMIC8058_GPIO_IRQS 40 +#define NR_PMIC8058_MPP_IRQS 12 +#define NR_PMIC8058_MISC_IRQS 8 +#define NR_PMIC8058_IRQS (NR_PMIC8058_GPIO_IRQS +\ + NR_PMIC8058_MPP_IRQS +\ + NR_PMIC8058_MISC_IRQS) +#define NR_BOARD_IRQS NR_PMIC8058_IRQS + +#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */ diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h new file mode 100644 index 00000000000..de3d8fe24e4 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/irqs-8x50.h @@ -0,0 +1,105 @@ +/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Code Aurora Forum, Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H +#define __ASM_ARCH_MSM_IRQS_8XXX_H + +/* MSM ACPU Interrupt Numbers */ + +#define INT_A9_M2A_0 0 +#define INT_A9_M2A_1 1 +#define INT_A9_M2A_2 2 +#define INT_A9_M2A_3 3 +#define INT_A9_M2A_4 4 +#define INT_A9_M2A_5 5 +#define INT_A9_M2A_6 6 +#define INT_GP_TIMER_EXP 7 +#define INT_DEBUG_TIMER_EXP 8 +#define INT_SIRC_0 9 +#define INT_SDC3_0 10 +#define INT_SDC3_1 11 +#define INT_SDC4_0 12 +#define INT_SDC4_1 13 +#define INT_AD6_EXT_VFR 14 +#define INT_USB_OTG 15 +#define INT_MDDI_PRI 16 +#define INT_MDDI_EXT 17 +#define INT_MDDI_CLIENT 18 +#define INT_MDP 19 +#define INT_GRAPHICS 20 +#define INT_ADM_AARM 21 +#define INT_ADSP_A11 22 +#define INT_ADSP_A9_A11 23 +#define INT_SDC1_0 24 +#define INT_SDC1_1 25 +#define INT_SDC2_0 26 +#define INT_SDC2_1 27 +#define INT_KEYSENSE 28 +#define INT_TCHSCRN_SSBI 29 +#define INT_TCHSCRN1 30 +#define INT_TCHSCRN2 31 + +#define INT_TCSR_MPRPH_SC1 (32 + 0) +#define INT_USB_FS2 (32 + 1) +#define INT_PWB_I2C (32 + 2) +#define INT_SOFTRESET (32 + 3) +#define INT_NAND_WR_ER_DONE (32 + 4) +#define INT_NAND_OP_DONE (32 + 5) +#define INT_TCSR_MPRPH_SC2 (32 + 6) +#define INT_OP_PEN (32 + 7) +#define INT_AD_HSSD (32 + 8) +#define INT_ARM11_PM (32 + 9) +#define INT_SDMA_NON_SECURE (32 + 10) +#define INT_TSIF_IRQ (32 + 11) +#define INT_UART1DM_IRQ (32 + 12) +#define INT_UART1DM_RX (32 + 13) +#define INT_SDMA_SECURE (32 + 14) +#define INT_SI2S_SLAVE (32 + 15) +#define INT_SC_I2CPU (32 + 16) +#define INT_SC_DBG_RDTRFULL (32 + 17) +#define INT_SC_DBG_WDTRFULL (32 + 18) +#define INT_SCPLL_CTL_DONE (32 + 19) +#define INT_UART2DM_IRQ (32 + 20) +#define INT_UART2DM_RX (32 + 21) +#define INT_VDC_MEC (32 + 22) +#define INT_VDC_DB (32 + 23) +#define INT_VDC_AXI (32 + 24) +#define INT_VFE (32 + 25) +#define INT_USB_HS (32 + 26) +#define INT_AUDIO_OUT0 (32 + 27) +#define INT_AUDIO_OUT1 (32 + 28) +#define INT_CRYPTO (32 + 29) +#define INT_AD6M_IDLE (32 + 30) +#define INT_SIRC_1 (32 + 31) + +#define NR_GPIO_IRQS 165 +#define NR_MSM_IRQS 64 +#define NR_BOARD_IRQS 64 + +#endif diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h index 9dd4cf8a269..164d355c96e 100644 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ b/arch/arm/mach-msm/include/mach/irqs.h @@ -1,6 +1,6 @@ -/* arch/arm/mach-msm/include/mach/irqs.h - * +/* * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> * * This software is licensed under the terms of the GNU General Public @@ -17,74 +17,21 @@ #ifndef __ASM_ARCH_MSM_IRQS_H #define __ASM_ARCH_MSM_IRQS_H -/* MSM ARM11 Interrupt Numbers */ -/* See 80-VE113-1 A, pp219-221 */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_UART1 9 -#define INT_UART2 10 -#define INT_UART3 11 -#define INT_UART1_RX 12 -#define INT_UART2_RX 13 -#define INT_UART3_RX 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_GPIO_GROUP1 (32 + 0) -#define INT_GPIO_GROUP2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_PBUS_ARM11 (32 + 6) -#define INT_AXI_MPU_SMI (32 + 7) -#define INT_AXI_MPU_EBI1 (32 + 8) -#define INT_AD_HSSD (32 + 9) -#define INT_ARM11_PMU (32 + 10) -#define INT_ARM11_DMA (32 + 11) -#define INT_TSIF_IRQ (32 + 12) -#define INT_UART1DM_IRQ (32 + 13) -#define INT_UART1DM_RX (32 + 14) -#define INT_USB_HS (32 + 15) -#define INT_SDC3_0 (32 + 16) -#define INT_SDC3_1 (32 + 17) -#define INT_SDC4_0 (32 + 18) -#define INT_SDC4_1 (32 + 19) -#define INT_UART2DM_RX (32 + 20) -#define INT_UART2DM_IRQ (32 + 21) - -/* 22-31 are reserved */ - #define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) -#define NR_MSM_IRQS 64 -#define NR_GPIO_IRQS 122 -#define NR_BOARD_IRQS 64 -#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) +#if defined(CONFIG_ARCH_MSM7X30) +#include "irqs-7x30.h" +#elif defined(CONFIG_ARCH_QSD8X50) +#include "irqs-8x50.h" +#include "sirc.h" +#elif defined(CONFIG_ARCH_MSM_ARM11) +#include "irqs-7x00.h" +#else +#error "Unknown architecture specification" +#endif +#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) #define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) +#define MSM_INT_TO_REG(base, irq) (base + irq / 32) #endif diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index f4698baec97..50c7847e600 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -17,7 +17,15 @@ #define __ASM_ARCH_MEMORY_H /* physical offset of RAM */ +#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) +#define PHYS_OFFSET UL(0x00000000) +#elif defined(CONFIG_ARCH_QSD8X50) +#define PHYS_OFFSET UL(0x20000000) +#elif defined(CONFIG_ARCH_MSM7X30) +#define PHYS_OFFSET UL(0x00200000) +#else #define PHYS_OFFSET UL(0x10000000) +#endif #endif diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h new file mode 100644 index 00000000000..1f4fc81b3d8 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_fb.h @@ -0,0 +1,147 @@ +/* arch/arm/mach-msm/include/mach/msm_fb.h + * + * Internal shared definitions for various MSM framebuffer parts. + * + * Copyright (C) 2007 Google Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MSM_FB_H_ +#define _MSM_FB_H_ + +#include <linux/device.h> + +struct mddi_info; + +struct msm_fb_data { + int xres; /* x resolution in pixels */ + int yres; /* y resolution in pixels */ + int width; /* disply width in mm */ + int height; /* display height in mm */ + unsigned output_format; +}; + +struct msmfb_callback { + void (*func)(struct msmfb_callback *); +}; + +enum { + MSM_MDDI_PMDH_INTERFACE, + MSM_MDDI_EMDH_INTERFACE, + MSM_EBI2_INTERFACE, +}; + +#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) + +struct msm_panel_data { + /* turns off the fb memory */ + int (*suspend)(struct msm_panel_data *); + /* turns on the fb memory */ + int (*resume)(struct msm_panel_data *); + /* turns off the panel */ + int (*blank)(struct msm_panel_data *); + /* turns on the panel */ + int (*unblank)(struct msm_panel_data *); + void (*wait_vsync)(struct msm_panel_data *); + void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); + void (*clear_vsync)(struct msm_panel_data *); + /* from the enum above */ + unsigned interface_type; + /* data to be passed to the fb driver */ + struct msm_fb_data *fb_data; + + /* capabilities supported by the panel */ + uint32_t caps; +}; + +struct msm_mddi_client_data { + void (*suspend)(struct msm_mddi_client_data *); + void (*resume)(struct msm_mddi_client_data *); + void (*activate_link)(struct msm_mddi_client_data *); + void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, + uint32_t reg); + uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); + void (*auto_hibernate)(struct msm_mddi_client_data *, int); + /* custom data that needs to be passed from the board file to a + * particular client */ + void *private_client_data; + struct resource *fb_resource; + /* from the list above */ + unsigned interface_type; +}; + +struct msm_mddi_platform_data { + unsigned int clk_rate; + void (*power_client)(struct msm_mddi_client_data *, int on); + + /* fixup the mfr name, product id */ + void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); + + struct resource *fb_resource; /*optional*/ + /* number of clients in the list that follows */ + int num_clients; + /* array of client information of clients */ + struct { + unsigned product_id; /* mfr id in top 16 bits, product id + * in lower 16 bits + */ + char *name; /* the device name will be the platform + * device name registered for the client, + * it should match the name of the associated + * driver + */ + unsigned id; /* id for mddi client device node, will also + * be used as device id of panel devices, if + * the client device will have multiple panels + * space must be left here for them + */ + void *client_data; /* required private client data */ + unsigned int clk_rate; /* optional: if the client requires a + * different mddi clk rate + */ + } client_platform_data[]; +}; + +struct mdp_blit_req; +struct fb_info; +struct mdp_device { + struct device dev; + void (*dma)(struct mdp_device *mpd, uint32_t addr, + uint32_t stride, uint32_t w, uint32_t h, uint32_t x, + uint32_t y, struct msmfb_callback *callback, int interface); + void (*dma_wait)(struct mdp_device *mdp); + int (*blit)(struct mdp_device *mdp, struct fb_info *fb, + struct mdp_blit_req *req); + void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); +}; + +struct class_interface; +int register_mdp_client(struct class_interface *class_intf); + +/**** private client data structs go below this line ***/ + +struct msm_mddi_bridge_platform_data { + /* from board file */ + int (*init)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*uninit)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + /* passed to panel for use by the fb driver */ + int (*blank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*unblank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + struct msm_fb_data fb_data; +}; + + + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h new file mode 100644 index 00000000000..cfff0e74f12 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -0,0 +1,139 @@ +/* arch/arm/mach-msm/include/mach/msm_iomap.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H +#define __ASM_ARCH_MSM_IOMAP_7X00_H + +#include <asm/sizes.h> + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#ifdef __ASSEMBLY__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define MSM_VIC_BASE IOMEM(0xE0000000) +#define MSM_VIC_PHYS 0xC0000000 +#define MSM_VIC_SIZE SZ_4K + +#define MSM_CSR_BASE IOMEM(0xE0001000) +#define MSM_CSR_PHYS 0xC0100000 +#define MSM_CSR_SIZE SZ_4K + +#define MSM_GPT_PHYS MSM_CSR_PHYS +#define MSM_GPT_BASE MSM_CSR_BASE +#define MSM_GPT_SIZE SZ_4K + +#define MSM_DMOV_BASE IOMEM(0xE0002000) +#define MSM_DMOV_PHYS 0xA9700000 +#define MSM_DMOV_SIZE SZ_4K + +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO1_PHYS 0xA9200000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE IOMEM(0xE0004000) +#define MSM_GPIO2_PHYS 0xA9300000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) +#define MSM_CLK_CTL_PHYS 0xA8600000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) +#define MSM_SHARED_RAM_PHYS 0x01F00000 +#define MSM_SHARED_RAM_SIZE SZ_1M + +#define MSM_UART1_PHYS 0xA9A00000 +#define MSM_UART1_SIZE SZ_4K + +#define MSM_UART2_PHYS 0xA9B00000 +#define MSM_UART2_SIZE SZ_4K + +#define MSM_UART3_PHYS 0xA9C00000 +#define MSM_UART3_SIZE SZ_4K + +#ifdef CONFIG_MSM_DEBUG_UART +#define MSM_DEBUG_UART_BASE 0xE1000000 +#if CONFIG_MSM_DEBUG_UART == 1 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif CONFIG_MSM_DEBUG_UART == 2 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif CONFIG_MSM_DEBUG_UART == 3 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif +#define MSM_DEBUG_UART_SIZE SZ_4K +#endif + +#define MSM_SDC1_PHYS 0xA0400000 +#define MSM_SDC1_SIZE SZ_4K + +#define MSM_SDC2_PHYS 0xA0500000 +#define MSM_SDC2_SIZE SZ_4K + +#define MSM_SDC3_PHYS 0xA0600000 +#define MSM_SDC3_SIZE SZ_4K + +#define MSM_SDC4_PHYS 0xA0700000 +#define MSM_SDC4_SIZE SZ_4K + +#define MSM_I2C_PHYS 0xA9900000 +#define MSM_I2C_SIZE SZ_4K + +#define MSM_HSUSB_PHYS 0xA0800000 +#define MSM_HSUSB_SIZE SZ_4K + +#define MSM_PMDH_PHYS 0xAA600000 +#define MSM_PMDH_SIZE SZ_4K + +#define MSM_EMDH_PHYS 0xAA700000 +#define MSM_EMDH_SIZE SZ_4K + +#define MSM_MDP_PHYS 0xAA200000 +#define MSM_MDP_SIZE 0x000F0000 + +#define MSM_MDC_PHYS 0xAA500000 +#define MSM_MDC_SIZE SZ_1M + +#define MSM_AD5_PHYS 0xAC000000 +#define MSM_AD5_SIZE (SZ_1M*13) + + +#if defined(CONFIG_ARCH_MSM7X30) +#define MSM_GCC_BASE IOMEM(0xF8009000) +#define MSM_GCC_PHYS 0xC0182000 +#define MSM_GCC_SIZE SZ_4K +#endif + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h new file mode 100644 index 00000000000..8a00c2defbc --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H +#define __ASM_ARCH_MSM_IOMAP_7X30_H + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_VIC_BASE IOMEM(0xE0000000) +#define MSM_VIC_PHYS 0xC0080000 +#define MSM_VIC_SIZE SZ_4K + +#define MSM_CSR_BASE IOMEM(0xE0001000) +#define MSM_CSR_PHYS 0xC0100000 +#define MSM_CSR_SIZE SZ_4K + +#define MSM_TMR_PHYS MSM_CSR_PHYS +#define MSM_TMR_BASE MSM_CSR_BASE +#define MSM_TMR_SIZE SZ_4K + +#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4) +#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) + +#define MSM_DMOV_BASE IOMEM(0xE0002000) +#define MSM_DMOV_PHYS 0xAC400000 +#define MSM_DMOV_SIZE SZ_4K + +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO1_PHYS 0xAC001000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE IOMEM(0xE0004000) +#define MSM_GPIO2_PHYS 0xAC101000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) +#define MSM_CLK_CTL_PHYS 0xAB800000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_CLK_CTL_SH2_BASE IOMEM(0xE0006000) +#define MSM_CLK_CTL_SH2_PHYS 0xABA01000 +#define MSM_CLK_CTL_SH2_SIZE SZ_4K + +#define MSM_ACC_BASE IOMEM(0xE0007000) +#define MSM_ACC_PHYS 0xC0101000 +#define MSM_ACC_SIZE SZ_4K + +#define MSM_SAW_BASE IOMEM(0xE0008000) +#define MSM_SAW_PHYS 0xC0102000 +#define MSM_SAW_SIZE SZ_4K + +#define MSM_GCC_BASE IOMEM(0xE0009000) +#define MSM_GCC_PHYS 0xC0182000 +#define MSM_GCC_SIZE SZ_4K + +#define MSM_TCSR_BASE IOMEM(0xE000A000) +#define MSM_TCSR_PHYS 0xAB600000 +#define MSM_TCSR_SIZE SZ_4K + +#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) +#define MSM_SHARED_RAM_PHYS 0x00100000 +#define MSM_SHARED_RAM_SIZE SZ_1M + +#define MSM_UART1_PHYS 0xACA00000 +#define MSM_UART1_SIZE SZ_4K + +#define MSM_UART2_PHYS 0xACB00000 +#define MSM_UART2_SIZE SZ_4K + +#define MSM_UART3_PHYS 0xACC00000 +#define MSM_UART3_SIZE SZ_4K + +#ifdef CONFIG_MSM_DEBUG_UART +#define MSM_DEBUG_UART_BASE 0xE1000000 +#if CONFIG_MSM_DEBUG_UART == 1 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif CONFIG_MSM_DEBUG_UART == 2 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif CONFIG_MSM_DEBUG_UART == 3 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif +#define MSM_DEBUG_UART_SIZE SZ_4K +#endif + +#define MSM_MDC_BASE IOMEM(0xE0200000) +#define MSM_MDC_PHYS 0xAA500000 +#define MSM_MDC_SIZE SZ_1M + +#define MSM_AD5_BASE IOMEM(0xE0300000) +#define MSM_AD5_PHYS 0xA7000000 +#define MSM_AD5_SIZE (SZ_1M*13) + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h new file mode 100644 index 00000000000..acc819eb76e --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H +#define __ASM_ARCH_MSM_IOMAP_8X50_H + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_VIC_BASE IOMEM(0xE0000000) +#define MSM_VIC_PHYS 0xAC000000 +#define MSM_VIC_SIZE SZ_4K + +#define MSM_CSR_BASE IOMEM(0xE0001000) +#define MSM_CSR_PHYS 0xAC100000 +#define MSM_CSR_SIZE SZ_4K + +#define MSM_TMR_PHYS MSM_CSR_PHYS +#define MSM_TMR_BASE MSM_CSR_BASE +#define MSM_TMR_SIZE SZ_4K + +#define MSM_GPT_BASE MSM_TMR_BASE +#define MSM_DGT_BASE (MSM_TMR_BASE + 0x10) + +#define MSM_DMOV_BASE IOMEM(0xE0002000) +#define MSM_DMOV_PHYS 0xA9700000 +#define MSM_DMOV_SIZE SZ_4K + +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO1_PHYS 0xA9000000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE IOMEM(0xE0004000) +#define MSM_GPIO2_PHYS 0xA9100000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) +#define MSM_CLK_CTL_PHYS 0xA8600000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_SIRC_BASE IOMEM(0xE1006000) +#define MSM_SIRC_PHYS 0xAC200000 +#define MSM_SIRC_SIZE SZ_4K + +#define MSM_SCPLL_BASE IOMEM(0xE1007000) +#define MSM_SCPLL_PHYS 0xA8800000 +#define MSM_SCPLL_SIZE SZ_4K + +#ifdef CONFIG_MSM_SOC_REV_A +#define MSM_SMI_BASE 0xE0000000 +#else +#define MSM_SMI_BASE 0x00000000 +#endif + +#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) +#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000) +#define MSM_SHARED_RAM_SIZE SZ_1M + +#define MSM_UART1_PHYS 0xA9A00000 +#define MSM_UART1_SIZE SZ_4K + +#define MSM_UART2_PHYS 0xA9B00000 +#define MSM_UART2_SIZE SZ_4K + +#define MSM_UART3_PHYS 0xA9C00000 +#define MSM_UART3_SIZE SZ_4K + +#ifdef CONFIG_MSM_DEBUG_UART +#define MSM_DEBUG_UART_BASE 0xE1000000 +#if CONFIG_MSM_DEBUG_UART == 1 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif CONFIG_MSM_DEBUG_UART == 2 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif CONFIG_MSM_DEBUG_UART == 3 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif +#define MSM_DEBUG_UART_SIZE SZ_4K +#endif + +#define MSM_MDC_BASE IOMEM(0xE0200000) +#define MSM_MDC_PHYS 0xAA500000 +#define MSM_MDC_SIZE SZ_1M + +#define MSM_AD5_BASE IOMEM(0xE0300000) +#define MSM_AD5_PHYS 0xAC000000 +#define MSM_AD5_SIZE (SZ_1M*13) + + +#define MSM_I2C_SIZE SZ_4K +#define MSM_I2C_PHYS 0xA9900000 + +#define MSM_HSUSB_PHYS 0xA0800000 +#define MSM_HSUSB_SIZE SZ_1K + +#define MSM_NAND_PHYS 0xA0A00000 + + +#define MSM_TSIF_PHYS (0xa0100000) +#define MSM_TSIF_SIZE (0x200) + +#define MSM_TSSC_PHYS 0xAA300000 + +#define MSM_UART1DM_PHYS 0xA0200000 +#define MSM_UART2DM_PHYS 0xA0900000 + + +#define MSM_SDC1_PHYS 0xA0400000 +#define MSM_SDC1_SIZE SZ_4K + +#define MSM_SDC2_PHYS 0xA0500000 +#define MSM_SDC2_SIZE SZ_4K + +#define MSM_SDC3_PHYS 0xA0600000 +#define MSM_SDC3_SIZE SZ_4K + +#define MSM_SDC4_PHYS 0xA0700000 +#define MSM_SDC4_SIZE SZ_4K + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 9dae1a98c77..e6b1821cc4e 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -1,6 +1,6 @@ -/* arch/arm/mach-msm/include/mach/msm_iomap.h - * +/* * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> * * This software is licensed under the terms of the GNU General Public @@ -43,91 +43,12 @@ #define IOMEM(x) ((void __force __iomem *)(x)) #endif -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xC0000000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_CSR_PHYS 0xC0100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_GPT_PHYS MSM_CSR_PHYS -#define MSM_GPT_BASE MSM_CSR_BASE -#define MSM_GPT_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K - -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K +#if defined(CONFIG_ARCH_MSM7X30) +#include "msm_iomap-7x30.h" +#elif defined(CONFIG_ARCH_QSD8X50) +#include "msm_iomap-8x50.h" +#else +#include "msm_iomap-7x00.h" #endif -#define MSM_SDC1_PHYS 0xA0400000 -#define MSM_SDC1_SIZE SZ_4K - -#define MSM_SDC2_PHYS 0xA0500000 -#define MSM_SDC2_SIZE SZ_4K - -#define MSM_SDC3_PHYS 0xA0600000 -#define MSM_SDC3_SIZE SZ_4K - -#define MSM_SDC4_PHYS 0xA0700000 -#define MSM_SDC4_SIZE SZ_4K - -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K - -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_4K - -#define MSM_PMDH_PHYS 0xAA600000 -#define MSM_PMDH_SIZE SZ_4K - -#define MSM_EMDH_PHYS 0xAA700000 -#define MSM_EMDH_SIZE SZ_4K - -#define MSM_MDP_PHYS 0xAA200000 -#define MSM_MDP_SIZE 0x000F0000 - -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_PHYS 0xAC000000 -#define MSM_AD5_SIZE (SZ_1M*13) - - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h new file mode 100644 index 00000000000..029463ec875 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_smd.h @@ -0,0 +1,109 @@ +/* linux/include/asm-arm/arch-msm/msm_smd.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_SMD_H +#define __ASM_ARCH_MSM_SMD_H + +typedef struct smd_channel smd_channel_t; + +extern int (*msm_check_for_modem_crash)(void); + +/* warning: notify() may be called before open returns */ +int smd_open(const char *name, smd_channel_t **ch, void *priv, + void (*notify)(void *priv, unsigned event)); + +#define SMD_EVENT_DATA 1 +#define SMD_EVENT_OPEN 2 +#define SMD_EVENT_CLOSE 3 + +int smd_close(smd_channel_t *ch); + +/* passing a null pointer for data reads and discards */ +int smd_read(smd_channel_t *ch, void *data, int len); + +/* Write to stream channels may do a partial write and return +** the length actually written. +** Write to packet channels will never do a partial write -- +** it will return the requested length written or an error. +*/ +int smd_write(smd_channel_t *ch, const void *data, int len); +int smd_write_atomic(smd_channel_t *ch, const void *data, int len); + +int smd_write_avail(smd_channel_t *ch); +int smd_read_avail(smd_channel_t *ch); + +/* Returns the total size of the current packet being read. +** Returns 0 if no packets available or a stream channel. +*/ +int smd_cur_packet_size(smd_channel_t *ch); + +/* used for tty unthrottling and the like -- causes the notify() +** callback to be called from the same lock context as is used +** when it is called from channel updates +*/ +void smd_kick(smd_channel_t *ch); + + +#if 0 +/* these are interruptable waits which will block you until the specified +** number of bytes are readable or writable. +*/ +int smd_wait_until_readable(smd_channel_t *ch, int bytes); +int smd_wait_until_writable(smd_channel_t *ch, int bytes); +#endif + +typedef enum { + SMD_PORT_DS = 0, + SMD_PORT_DIAG, + SMD_PORT_RPC_CALL, + SMD_PORT_RPC_REPLY, + SMD_PORT_BT, + SMD_PORT_CONTROL, + SMD_PORT_MEMCPY_SPARE1, + SMD_PORT_DATA1, + SMD_PORT_DATA2, + SMD_PORT_DATA3, + SMD_PORT_DATA4, + SMD_PORT_DATA5, + SMD_PORT_DATA6, + SMD_PORT_DATA7, + SMD_PORT_DATA8, + SMD_PORT_DATA9, + SMD_PORT_DATA10, + SMD_PORT_DATA11, + SMD_PORT_DATA12, + SMD_PORT_DATA13, + SMD_PORT_DATA14, + SMD_PORT_DATA15, + SMD_PORT_DATA16, + SMD_PORT_DATA17, + SMD_PORT_DATA18, + SMD_PORT_DATA19, + SMD_PORT_DATA20, + SMD_PORT_GPS_NMEA, + SMD_PORT_BRIDGE_1, + SMD_PORT_BRIDGE_2, + SMD_PORT_BRIDGE_3, + SMD_PORT_BRIDGE_4, + SMD_PORT_BRIDGE_5, + SMD_PORT_LOOPBACK, + SMD_PORT_CS_APPS_MODEM, + SMD_PORT_CS_APPS_DSP, + SMD_PORT_CS_MODEM_DSP, + SMD_NUM_PORTS, +} smd_port_id_type; + +#endif diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h new file mode 100644 index 00000000000..7281337ee28 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/sirc.h @@ -0,0 +1,115 @@ +/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Code Aurora Forum, Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __ASM_ARCH_MSM_SIRC_H +#define __ASM_ARCH_MSM_SIRC_H + +struct sirc_regs_t { + void *int_enable; + void *int_enable_clear; + void *int_enable_set; + void *int_type; + void *int_polarity; + void *int_clear; +}; + +struct sirc_cascade_regs { + void *int_status; + unsigned int cascade_irq; +}; + +void msm_init_sirc(void); +void msm_sirc_enter_sleep(void); +void msm_sirc_exit_sleep(void); + +#if defined(CONFIG_ARCH_MSM_SCORPION) + +#include <mach/msm_iomap.h> + +/* + * Secondary interrupt controller interrupts + */ + +#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS) + +#define INT_UART1 (FIRST_SIRC_IRQ + 0) +#define INT_UART2 (FIRST_SIRC_IRQ + 1) +#define INT_UART3 (FIRST_SIRC_IRQ + 2) +#define INT_UART1_RX (FIRST_SIRC_IRQ + 3) +#define INT_UART2_RX (FIRST_SIRC_IRQ + 4) +#define INT_UART3_RX (FIRST_SIRC_IRQ + 5) +#define INT_SPI_INPUT (FIRST_SIRC_IRQ + 6) +#define INT_SPI_OUTPUT (FIRST_SIRC_IRQ + 7) +#define INT_SPI_ERROR (FIRST_SIRC_IRQ + 8) +#define INT_GPIO_GROUP1 (FIRST_SIRC_IRQ + 9) +#define INT_GPIO_GROUP2 (FIRST_SIRC_IRQ + 10) +#define INT_GPIO_GROUP1_SECURE (FIRST_SIRC_IRQ + 11) +#define INT_GPIO_GROUP2_SECURE (FIRST_SIRC_IRQ + 12) +#define INT_AVS_SVIC (FIRST_SIRC_IRQ + 13) +#define INT_AVS_REQ_UP (FIRST_SIRC_IRQ + 14) +#define INT_AVS_REQ_DOWN (FIRST_SIRC_IRQ + 15) +#define INT_PBUS_ERR (FIRST_SIRC_IRQ + 16) +#define INT_AXI_ERR (FIRST_SIRC_IRQ + 17) +#define INT_SMI_ERR (FIRST_SIRC_IRQ + 18) +#define INT_EBI1_ERR (FIRST_SIRC_IRQ + 19) +#define INT_IMEM_ERR (FIRST_SIRC_IRQ + 20) +#define INT_TEMP_SENSOR (FIRST_SIRC_IRQ + 21) +#define INT_TV_ENC (FIRST_SIRC_IRQ + 22) +#define INT_GRP2D (FIRST_SIRC_IRQ + 23) +#define INT_GSBI_QUP (FIRST_SIRC_IRQ + 24) +#define INT_SC_ACG (FIRST_SIRC_IRQ + 25) +#define INT_WDT0 (FIRST_SIRC_IRQ + 26) +#define INT_WDT1 (FIRST_SIRC_IRQ + 27) + +#if defined(CONFIG_MSM_SOC_REV_A) +#define NR_SIRC_IRQS 28 +#define SIRC_MASK 0x0FFFFFFF +#else +#define NR_SIRC_IRQS 23 +#define SIRC_MASK 0x007FFFFF +#endif + +#define LAST_SIRC_IRQ (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1) + +#define SPSS_SIRC_INT_SELECT (MSM_SIRC_BASE + 0x00) +#define SPSS_SIRC_INT_ENABLE (MSM_SIRC_BASE + 0x04) +#define SPSS_SIRC_INT_ENABLE_CLEAR (MSM_SIRC_BASE + 0x08) +#define SPSS_SIRC_INT_ENABLE_SET (MSM_SIRC_BASE + 0x0C) +#define SPSS_SIRC_INT_TYPE (MSM_SIRC_BASE + 0x10) +#define SPSS_SIRC_INT_POLARITY (MSM_SIRC_BASE + 0x14) +#define SPSS_SIRC_SECURITY (MSM_SIRC_BASE + 0x18) +#define SPSS_SIRC_IRQ_STATUS (MSM_SIRC_BASE + 0x1C) +#define SPSS_SIRC_IRQ1_STATUS (MSM_SIRC_BASE + 0x20) +#define SPSS_SIRC_RAW_STATUS (MSM_SIRC_BASE + 0x24) +#define SPSS_SIRC_INT_CLEAR (MSM_SIRC_BASE + 0x28) +#define SPSS_SIRC_SOFT_INT (MSM_SIRC_BASE + 0x2C) + +#endif + +#endif diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index 574ccc493da..d2e83f42ba1 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -21,3 +21,8 @@ static inline void arch_reset(char mode, const char *cmd) { for (;;) ; /* depends on IPC w/ other core */ } + +/* low level hardware reset hook -- for example, hitting the + * PSHOLD line on the PMIC to hard reset the system + */ +extern void (*msm_hw_reset_hook)(void); diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h index 9f9e25cb718..6626e7864e2 100644 --- a/arch/arm/mach-msm/include/mach/vreg.h +++ b/arch/arm/mach-msm/include/mach/vreg.h @@ -23,7 +23,7 @@ struct vreg *vreg_get(struct device *dev, const char *id); void vreg_put(struct vreg *vreg); int vreg_enable(struct vreg *vreg); -void vreg_disable(struct vreg *vreg); +int vreg_disable(struct vreg *vreg); int vreg_set_level(struct vreg *vreg, unsigned mv); #endif |