diff options
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 319 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 75 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 151 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/clock.c | 18 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/devices.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/fpga.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/id.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/io.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/irq.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-h2p2-debug.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-innovator.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-osk.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/mux.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/pm.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/serial.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/sleep.S | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/time.c | 7 |
21 files changed, 531 insertions, 80 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index f8d716ccc1d..d135568dc9e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. +config MACH_OMAP_FSAMPLE + bool "TI F-Sample" + depends on ARCH_OMAP1 && ARCH_OMAP730 + help + Support for TI OMAP 850 F-Sample board. Say Y here if you have such + a board. + config MACH_VOICEBLUE bool "Voiceblue" depends on ARCH_OMAP1 && ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9ea719550ad..7165f74f78d 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o +obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 73df32aac4c..8437d065ada 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = { .enabled_uarts = 1, }; +static struct omap_usb_config ams_delta_usb_config __initdata = { + .register_host = 1, + .hmc_mode = 16, + .pins[0] = 2, +}; + static struct omap_board_config_kernel ams_delta_config[] = { { OMAP_TAG_UART, &ams_delta_uart_config }, + { OMAP_TAG_USB, &ams_delta_usb_config }, }; static struct platform_device ams_delta_led_device = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c new file mode 100644 index 00000000000..c753a3c5aad --- /dev/null +++ b/arch/arm/mach-omap1/board-fsample.c @@ -0,0 +1,319 @@ +/* + * linux/arch/arm/mach-omap1/board-fsample.c + * + * Modified from board-perseus2.c + * + * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> + * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/fpga.h> +#include <asm/arch/keypad.h> +#include <asm/arch/common.h> +#include <asm/arch/board.h> +#include <asm/arch/board-fsample.h> + +static int fsample_keymap[] = { + KEY(0,0,KEY_UP), + KEY(0,1,KEY_RIGHT), + KEY(0,2,KEY_LEFT), + KEY(0,3,KEY_DOWN), + KEY(0,4,KEY_CENTER), + KEY(0,5,KEY_0_5), + KEY(1,0,KEY_SOFT2), + KEY(1,1,KEY_SEND), + KEY(1,2,KEY_END), + KEY(1,3,KEY_VOLUMEDOWN), + KEY(1,4,KEY_VOLUMEUP), + KEY(1,5,KEY_RECORD), + KEY(2,0,KEY_SOFT1), + KEY(2,1,KEY_3), + KEY(2,2,KEY_6), + KEY(2,3,KEY_9), + KEY(2,4,KEY_SHARP), + KEY(2,5,KEY_2_5), + KEY(3,0,KEY_BACK), + KEY(3,1,KEY_2), + KEY(3,2,KEY_5), + KEY(3,3,KEY_8), + KEY(3,4,KEY_0), + KEY(3,5,KEY_HEADSETHOOK), + KEY(4,0,KEY_HOME), + KEY(4,1,KEY_1), + KEY(4,2,KEY_4), + KEY(4,3,KEY_7), + KEY(4,4,KEY_STAR), + KEY(4,5,KEY_POWER), + 0 +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ + .end = H2P2_DBG_FPGA_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_730_MPU_EXT_NIRQ, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mtd_partition nor_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* rest of flash is a file system */ + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + }, +}; + +static struct flash_platform_data nor_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = nor_partitions, + .nr_parts = ARRAY_SIZE(nor_partitions), +}; + +static struct resource nor_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nor_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &nor_data, + }, + .num_resources = 1, + .resource = &nor_resource, +}; + +static struct nand_platform_data nand_data = { + .options = NAND_SAMSUNG_LP_OPTIONS, +}; + +static struct resource nand_resource = { + .start = OMAP_CS3_PHYS, + .end = OMAP_CS3_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nand_device = { + .name = "omapnand", + .id = 0, + .dev = { + .platform_data = &nand_data, + }, + .num_resources = 1, + .resource = &nand_resource, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct resource kp_resources[] = { + [0] = { + .start = INT_730_MPUIO_KEYPAD, + .end = INT_730_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data kp_data = { + .rows = 8, + .cols = 8, + .keymap = fsample_keymap, +}; + +static struct platform_device kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &kp_data, + }, + .num_resources = ARRAY_SIZE(kp_resources), + .resource = kp_resources, +}; + +static struct platform_device lcd_device = { + .name = "lcd_p2", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &nor_device, + &nand_device, + &smc91x_device, + &kp_device, + &lcd_device, +}; + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct nand_platform_data *data) +{ + return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); +} + +static struct omap_uart_config fsample_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1)), +}; + +static struct omap_lcd_config fsample_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel fsample_config[] = { + { OMAP_TAG_UART, &fsample_uart_config }, + { OMAP_TAG_LCD, &fsample_lcd_config }, +}; + +static void __init omap_fsample_init(void) +{ + if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN))) + nand_data.dev_ready = nand_dev_ready; + + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); + omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + omap_board_config = fsample_config; + omap_board_config_size = ARRAY_SIZE(fsample_config); + omap_serial_init(); +} + +static void __init fsample_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + +void omap_fsample_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); + fsample_init_smc91x(); +} + +/* Only FPGA needs to be mapped here. All others are done with ioremap */ +static struct map_desc omap_fsample_io_desc[] __initdata = { + { + .virtual = H2P2_DBG_FPGA_BASE, + .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), + .length = H2P2_DBG_FPGA_SIZE, + .type = MT_DEVICE + }, + { + .virtual = FSAMPLE_CPLD_BASE, + .pfn = __phys_to_pfn(FSAMPLE_CPLD_START), + .length = FSAMPLE_CPLD_SIZE, + .type = MT_DEVICE + } +}; + +static void __init omap_fsample_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap_fsample_io_desc, + ARRAY_SIZE(omap_fsample_io_desc)); + + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); + omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); + omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); +} + +MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") +/* Maintainer: Brian Swetland <swetland@google.com> */ + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_fsample_map_io, + .init_irq = omap_fsample_init_irq, + .init_machine = omap_fsample_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4b8d0ec73cb..7b206116cd0 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -14,7 +14,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/init.h> #include <linux/major.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index e90c137a4cf..4cbc62db5b5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -37,6 +37,8 @@ #include <asm/arch/usb.h> #include <asm/arch/keypad.h> #include <asm/arch/common.h> +#include <asm/arch/mcbsp.h> +#include <asm/arch/omap-alsa.h> static int innovator_keymap[] = { KEY(0, 0, KEY_F1), @@ -112,6 +114,42 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "OMAP Innovator AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, // aic23_configure, + .codec_set_samplerate = NULL, // aic23_set_samplerate, + .codec_clock_setup = NULL, // aic23_clock_setup, + .codec_clock_on = NULL, // aic23_clock_on, + .codec_clock_off = NULL, // aic23_clock_off, + .get_default_samplerate = NULL, // aic23_get_default_samplerate, +}; + +static struct platform_device innovator_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct resource innovator_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -139,6 +177,10 @@ static struct platform_device innovator_kp_device = { #ifdef CONFIG_ARCH_OMAP15XX +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + + /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { { @@ -174,13 +216,44 @@ static struct platform_device innovator1510_lcd_device = { .id = -1, }; +static struct platform_device innovator1510_spi_device = { + .name = "spi_inn1510", + .id = -1, +}; + static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, + &innovator_mcbsp1_device, &innovator_kp_device, &innovator1510_lcd_device, + &innovator1510_spi_device, }; +static int innovator_get_pendown_state(void) +{ + return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); +} + +static const struct ads7846_platform_data innovator1510_ts_info = { + .model = 7846, + .vref_delay_usecs = 100, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .get_pendown_state = innovator_get_pendown_state, +}; + +static struct spi_board_info __initdata innovator1510_boardinfo[] = { { + /* FPGA (bus "10") CS0 has an ads7846e */ + .modalias = "ads7846", + .platform_data = &innovator1510_ts_info, + .irq = OMAP1510_INT_FPGA_TS, + .max_speed_hz = 120000 /* max sample rate at 3V */ + * 26 /* command + data + overhead */, + .bus_num = 10, + .chip_select = 0, +} }; + #endif /* CONFIG_ARCH_OMAP15XX */ #ifdef CONFIG_ARCH_OMAP16XX @@ -311,6 +384,8 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); + spi_register_board_info(innovator1510_boardinfo, + ARRAY_SIZE(innovator1510_boardinfo)); } #endif #ifdef CONFIG_ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 1160093e8ef..b742261c97a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -29,11 +29,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -45,25 +44,10 @@ #include <asm/arch/usb.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> -#include <asm/arch/keypad.h> #include <asm/arch/common.h> #include <asm/arch/mcbsp.h> #include <asm/arch/omap-alsa.h> -static int osk_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(0, 3, KEY_UP), - KEY(1, 1, KEY_LEFTCTRL), - KEY(1, 2, KEY_LEFT), - KEY(2, 0, KEY_SPACE), - KEY(2, 1, KEY_ESC), - KEY(2, 2, KEY_DOWN), - KEY(3, 2, KEY_ENTER), - KEY(3, 3, KEY_RIGHT), - 0 -}; - - static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -181,48 +165,17 @@ static struct omap_alsa_codec_config alsa_config = { static struct platform_device osk5912_mcbsp1_device = { .name = "omap_alsa_mcbsp", - .id = 1, + .id = 1, .dev = { .platform_data = &alsa_config, }, }; -static struct resource osk5912_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_kp_platform_data osk_kp_data = { - .rows = 8, - .cols = 8, - .keymap = osk_keymap, -}; - -static struct platform_device osk5912_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &osk_kp_data, - }, - .num_resources = ARRAY_SIZE(osk5912_kp_resources), - .resource = osk5912_kp_resources, -}; - -static struct platform_device osk5912_lcd_device = { - .name = "lcd_osk", - .id = -1, -}; - static struct platform_device *osk5912_devices[] __initdata = { &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, &osk5912_mcbsp1_device, - &osk5912_kp_device, - &osk5912_lcd_device, }; static void __init osk_init_smc91x(void) @@ -276,18 +229,100 @@ static struct omap_uart_config osk_uart_config __initdata = { .enabled_uarts = (1 << 0), }; +#ifdef CONFIG_OMAP_OSK_MISTRAL static struct omap_lcd_config osk_lcd_config __initdata = { .ctrl_name = "internal", }; +#endif static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, { OMAP_TAG_UART, &osk_uart_config }, +#ifdef CONFIG_OMAP_OSK_MISTRAL { OMAP_TAG_LCD, &osk_lcd_config }, +#endif }; #ifdef CONFIG_OMAP_OSK_MISTRAL +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <asm/arch/keypad.h> + +static const int osk_keymap[] = { + /* KEY(col, row, code) */ + KEY(0, 0, KEY_F1), /* SW4 */ + KEY(0, 3, KEY_UP), /* (sw2/up) */ + KEY(1, 1, KEY_LEFTCTRL), /* SW5 */ + KEY(1, 2, KEY_LEFT), /* (sw2/left) */ + KEY(2, 0, KEY_SPACE), /* SW3 */ + KEY(2, 1, KEY_ESC), /* SW6 */ + KEY(2, 2, KEY_DOWN), /* (sw2/down) */ + KEY(3, 2, KEY_ENTER), /* (sw2/select) */ + KEY(3, 3, KEY_RIGHT), /* (sw2/right) */ + 0 +}; + +static struct omap_kp_platform_data osk_kp_data = { + .rows = 8, + .cols = 8, + .keymap = (int *) osk_keymap, +}; + +static struct resource osk5912_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device osk5912_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &osk_kp_data, + }, + .num_resources = ARRAY_SIZE(osk5912_kp_resources), + .resource = osk5912_kp_resources, +}; + +static struct platform_device osk5912_lcd_device = { + .name = "lcd_osk", + .id = -1, +}; + +static struct platform_device *mistral_devices[] __initdata = { + &osk5912_kp_device, + &osk5912_lcd_device, +}; + +static int mistral_get_pendown_state(void) +{ + return !omap_get_gpio_datain(4); +} + +static const struct ads7846_platform_data mistral_ts_info = { + .model = 7846, + .vref_delay_usecs = 100, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .get_pendown_state = mistral_get_pendown_state, +}; + +static struct spi_board_info __initdata mistral_boardinfo[] = { { + /* MicroWire (bus 2) CS0 has an ads7846e */ + .modalias = "ads7846", + .platform_data = &mistral_ts_info, + .irq = OMAP_GPIO_IRQ(4), + .max_speed_hz = 120000 /* max sample rate at 3V */ + * 26 /* command + data + overhead */, + .bus_num = 2, + .chip_select = 0, +} }; + #ifdef CONFIG_PM static irqreturn_t osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) @@ -298,14 +333,18 @@ osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) static void __init osk_mistral_init(void) { - /* FIXME here's where to feed in framebuffer, touchpad, and - * keyboard setup ... not in the drivers for those devices! - * - * NOTE: we could actually tell if there's a Mistral board + /* NOTE: we could actually tell if there's a Mistral board * attached, e.g. by trying to read something from the ads7846. - * But this is too early for that... + * But this arch_init() code is too early for that, since we + * can't talk to the ads or even the i2c eeprom. */ + // omap_cfg_reg(P19_1610_GPIO6); // BUSY + omap_cfg_reg(P20_1610_GPIO4); // PENIRQ + set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); + spi_register_board_info(mistral_boardinfo, + ARRAY_SIZE(mistral_boardinfo)); + /* the sideways button (SW1) is for use as a "wakeup" button */ omap_cfg_reg(N15_1610_MPUIO2); if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { @@ -318,7 +357,7 @@ static void __init osk_mistral_init(void) */ ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), &osk_mistral_wake_interrupt, - SA_SHIRQ, "mistral_wakeup", + IRQF_SHARED, "mistral_wakeup", &osk_mistral_wake_interrupt); if (ret != 0) { omap_free_gpio(OMAP_MPUIO(2)); @@ -329,6 +368,8 @@ static void __init osk_mistral_init(void) #endif } else printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); + + platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); } #else static void __init osk_mistral_init(void) { } diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 619db18144e..f1958e882e8 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,3 +1,4 @@ +//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text) /* * linux/arch/arm/mach-omap1/clock.c * @@ -20,6 +21,7 @@ #include <asm/io.h> +#include <asm/arch/cpu.h> #include <asm/arch/usb.h> #include <asm/arch/clock.h> #include <asm/arch/sram.h> @@ -270,8 +272,12 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) /* * In most cases we should not need to reprogram DPLL. * Reprogramming the DPLL is tricky, it must be done from SRAM. + * (on 730, bit 13 must always be 1) */ - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + if (cpu_is_omap730()) + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); + else + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); @@ -748,7 +754,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; propagate_rate(&ck_dpll1); } @@ -761,13 +767,17 @@ int __init omap1_clk_init(void) ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); -#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); #endif /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap730()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); /* Put DSP/MPUI into reset until needed */ omap_writew(0, ARM_RSTCT1); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 847329cafc5..a611c3b6395 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -9,7 +9,6 @@ * (at your option) any later version. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index aca2a120813..34eb79ee6e6 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -16,7 +16,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/init.h> #include <linux/kernel.h> @@ -134,7 +133,7 @@ static struct irqchip omap_fpga_irq = { * mask_ack routine for all of the FPGA interrupts has been changed from * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt * being serviced is left unmasked. We can do this because the FPGA cascade - * interrupt is installed with the SA_INTERRUPT flag, which leaves all + * interrupt is installed with the IRQF_DISABLED flag, which leaves all * interrupts masked at the CPU while an FPGA interrupt handler executes. * * Limited testing indicates that this workaround appears to be effective diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 5c637c04836..da13c3e8285 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -11,7 +11,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index be3a2a4ee2b..fab8b0b27cf 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index a0431c00fa8..9e039845b50 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -36,7 +36,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/config.h> #include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 65065081591..8976fbb21f7 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -9,7 +9,6 @@ * The "surfer" expansion board and H2 sample board also have two-color * green+red LEDs (in parallel), used here for timer and idle indicators. */ -#include <linux/config.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index c8ffd1ddcde..a0cd001ac39 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -1,7 +1,6 @@ /* * linux/arch/arm/mach-omap1/leds-innovator.c */ -#include <linux/config.h> #include <linux/init.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 2c8bda847c1..3b29e59b0e6 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -3,7 +3,6 @@ * * LED driver for OSK, and optionally Mistral QVGA, boards */ -#include <linux/config.h> #include <linux/init.h> #include <linux/workqueue.h> diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 10fe0b3efca..fa74ef7af15 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -22,7 +22,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <asm/system.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index ddf6b07dc9c..cd76185bab7 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -1,3 +1,4 @@ +//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text) /* * linux/arch/arm/mach-omap1/pm.c * @@ -50,6 +51,7 @@ #include <asm/mach/irq.h> #include <asm/mach-types.h> +#include <asm/arch/cpu.h> #include <asm/arch/irqs.h> #include <asm/arch/clock.h> #include <asm/arch/sram.h> @@ -326,8 +328,9 @@ void omap_pm_suspend(void) /* stop DSP */ omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); - /* shut down dsp_ck */ - omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); + /* shut down dsp_ck */ + if (!cpu_is_omap730()) + omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); @@ -687,7 +690,7 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, static struct irqaction omap_wakeup_irq = { .name = "peripheral wakeup", - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .handler = omap_wakeup_interrupt }; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 9b4cd698bec..976edfb882e 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -8,10 +8,10 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/tty.h> @@ -253,7 +253,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) } omap_set_gpio_direction(gpio_nr, 1); ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, - SA_TRIGGER_RISING, "serial wakeup", NULL); + IRQF_TRIGGER_RISING, "serial wakeup", NULL); if (ret) { omap_free_gpio(gpio_nr); printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index e58295e2d3b..abef33d10f0 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -32,7 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/config.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/arch/io.h> diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index a85fe6066bc..4d91b9f5108 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -33,7 +33,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -94,7 +93,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc) * will break. On P2, the timer count rate is 6.5 MHz after programming PTV * with 0. This divides the 13MHz input by 2, and is undocumented. */ -#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* REVISIT: This ifdef construct should be replaced by a query to clock * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz. */ @@ -178,7 +177,7 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer_irq = { .name = "mpu timer", - .flags = SA_INTERRUPT | SA_TIMER, + .flags = IRQF_DISABLED | IRQF_TIMER, .handler = omap_mpu_timer_interrupt, }; @@ -192,7 +191,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer1_irq = { .name = "mpu timer1 overflow", - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .handler = omap_mpu_timer1_interrupt, }; |