diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0020.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 79 |
1 files changed, 26 insertions, 53 deletions
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca3f73..35be778caf1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void) static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply igep_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep_vmmc1 = { @@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), + .consumer_supplies = igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vio_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vio = { .constraints = { @@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), + .consumer_supplies = igep_vio_supply, }; -static struct regulator_consumer_supply igep_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), + .consumer_supplies = igep_vmmc2_supply, }; static struct fixed_voltage_config igep_vwlan = { @@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static int igep2_enable_dvi(struct omap_dss_device *dssdev) { gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); @@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct regulator_consumer_supply igep2_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data igep2_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), - .consumer_supplies = igep2_vpll2_supplies, -}; - static void __init igep2_display_init(void) { int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, @@ -519,13 +498,6 @@ static void __init igep_init_early(void) m65kxxxxam_sdrc_params); } -static struct twl4030_codec_audio_data igep2_audio_data; - -static struct twl4030_codec_data igep2_codec_data = { - .audio_mclk = 26000000, - .audio = &igep2_audio_data, -}; - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { }; static struct twl4030_platform_data igep_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &igep_usb_data, .gpio = &igep_twl4030_gpio_pdata, .vmmc1 = &igep_vmmc1, .vio = &igep_vio, @@ -578,6 +546,8 @@ static void __init igep_i2c_init(void) { int ret; + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0); + if (machine_is_igep0020()) { /* * Bus 3 is attached to the DVI port where devices like the @@ -588,9 +558,12 @@ static void __init igep_i2c_init(void) if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - igep_twldata.codec = &igep2_codec_data; igep_twldata.keypad = &igep2_keypad_pdata; - igep_twldata.vpll2 = &igep2_vpll2; + /* Get common pmic data */ + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VPLL2); + igep_twldata.vpll2->constraints.apply_uV = true; + igep_twldata.vpll2->constraints.name = "VDVI"; } omap3_pmic_init("twl4030", &igep_twldata); @@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END |